Kernel Panic when waking from sleep mode., Kernel Panic when waking from sleep mode.

Hi,
I have an Imac 2.8 GHz Intel Core 2 Duo desktop which I have upgraded to lion.
Recently I keep getting kernel panics when waking from sleep mode and I cannot figure out what it is.
I am not very computer savy - I.e. I use a computer but don't know programming etc.
The computer then asks me to shut down and restart.
Any help would be much appreciated as this is driving me crazy.
An example of the latest kernel panic log as as follows:
Fri Jan 6 21:25:02 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002936b3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000020, CR3: 0x000000000f636000, CR4: 0x0000000000000660
RAX: 0x000000000006f9d8, RBX: 0xffffff800445d598, RCX: 0x0000000000000020, RDX: 0x0000000000019fd8
RSP: 0xffffff808073b520, RBP: 0xffffff808073b540, RSI: 0x000000002996b2ee, RDI: 0xffffff8003f83ce8
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff800bf31788, R11: 0x0000000000009268
R12: 0xffffff800374c000, R13: 0xffffff800445d598, R14: 0x000000000006f9d8, R15: 0xffffff8003f83ce8
RFL: 0x0000000000010202, RIP: 0xffffff80002936b3, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000000020, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808073b1e0 : 0xffffff8000220702
0xffffff808073b260 : 0xffffff80002c266d
0xffffff808073b400 : 0xffffff80002d7a1d
0xffffff808073b420 : 0xffffff80002936b3
0xffffff808073b540 : 0xffffff800029383b
0xffffff808073b560 : 0xffffff800029485b
0xffffff808073b590 : 0xffffff800027e44b
0xffffff808073b5f0 : 0xffffff7f811a44dd
0xffffff808073b630 : 0xffffff7f811a36c4
0xffffff808073b760 : 0xffffff8000328517
0xffffff808073b7b0 : 0xffffff80002e823b
0xffffff808073b8a0 : 0xffffff80003170ce
0xffffff808073b8d0 : 0xffffff80002ec664
0xffffff808073b9e0 : 0xffffff80002f0229
0xffffff808073ba50 : 0xffffff80002f0265
0xffffff808073ba80 : 0xffffff80004e6833
0xffffff808073bb50 : 0xffffff8000316ca3
0xffffff808073bba0 : 0xffffff80005a6e29
0xffffff808073bc30 : 0xffffff8000265675
0xffffff808073bc80 : 0xffffff80002651f3
0xffffff808073bcc0 : 0xffffff800026a62f
0xffffff808073bdc0 : 0xffffff800026cdb4
0xffffff808073bf40 : 0xffffff80002c1f0b
0xffffff808073bfb0 : 0xffffff80002d7941
      Kernel Extensions in backtrace:
         com.apple.BootCache(33.0)[7D74A237-77EF-359F-B1E2-CB1E602E8B9F]@0xffffff7f811a2 000->0xffffff7f811aafff
BSD process name corresponding to current thread: corestoraged
Boot args: 0x0
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 46767492658
last loaded kext at 39979515424: com.apple.driver.AppleTyMCEDriver          1.0.2d2 (addr 0xffffff7f81930000, size 45056)
loaded kexts:
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleHDA          2.1.3f7
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.kext.ATIFramebuffer          7.1.2
com.apple.driver.AppleMuxControl          3.0.16
com.apple.driver.AppleBacklight          170.1.9
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.ATIRadeonX2000          7.1.2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.1
com.apple.driver.AppleLPC          1.5.3
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.CoreStorageFsck          182.10
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.0.1
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.iokit.AppleYukon2          3.2.2b1
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          4.5.0
com.apple.driver.AirPortBrcm43224          500.36.11
com.apple.driver.AppleUSBUHCI          4.4.5
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1
com.apple.driver.AppleIntelCPUPowerManagement          167.0.0
com.apple.driver.AppleAVBAudio          1.0.0d11
com.apple.driver.AppleHDAHardwareConfigDriver          2.1.3f7
com.apple.driver.DspFuncLib          2.1.3f7
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleHDAController          2.1.3f7
com.apple.iokit.IOHDAFamily          2.1.3f7
com.apple.iokit.IOBluetoothSerialManager          4.0.1f4
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAVBFamily          1.0.0d22
com.apple.iokit.IOEthernetAVBController          1.0.0d5
com.apple.iokit.IOAudioFamily          1.8.3fc11
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.kext.ATI2600Controller          7.1.2
com.apple.kext.ATISupport          7.1.2
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.AppleSMC          3.1.1d8
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.AppleFileSystemDriver          13
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.1f4
com.apple.iokit.IOBluetoothFamily          4.0.1f4
com.apple.driver.CoreStorage          182.10
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.1
com.apple.iokit.IOUSBMassStorageClass          3.0.0
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.1
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.driver.XsanFilter          403
com.apple.iokit.IOATAPIProtocolTransport          3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.1
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IOUSBUserClient          4.5.3
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IO80211Family          411.1
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOUSBFamily          4.5.3
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          165.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.7
com.apple.iokit.IOACPIFamily          1.4
This is all double dutch to me.
Would anyone be able to help please???
Thank you very much !!
Dave

Hi, for other peoples information - I finally figured out the problem. It was actually a faulty RAM module which I had bought. I had upgraded from 2 to 4 gb of RAM using an approved type of RAM for my particular computer. Finally I removed one module of RAM (after doing nearly everything else under the sun including trying to reinstall the operating system and wipe the computer etc) and the computer worked fine.
Dave

Similar Messages

Kernel panics every time (shut down your computer). When it stays on I get blotched video, left-over spots, tearig and then shut down your computer...

I use my PowerPC Quicksilver G4 (2.1), 867 MHz, 1.5 GB standart video card system 10.4.11 to scan (lack of driver for my Mac Pro 10.6.8)
The G4 has been running flawless, now I get kernel panics every time (shut down your computer). When it stays on I get blotched video
left-over spots, tearig and then shut down your computer...
I did all recommended software tests Diskutility, rebuild with DiskWarrior and Apples full Hardware test. Everything comes out fine!
I am at the end of my know how. Thank you for any help
                                                                                                         W.W.
I am attaching the latest crashreport:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000047AC834E PC=0x0000000000821D3C
Latest crash info for cpu 0:
   Exception state (sv=0x37D2EA00)
      PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
      Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
         0x00029234 0x000233F8 0x000ABEAC 0x5038514E
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.GeForce(4.1.8)@0x7ff000
            dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
            dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
            dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
            dependency: com.apple.NVDAResman(4.1.8)@0x636000
Proceeding back via exception chain:
   Exception state (sv=0x37D2EA00)
      previously dumped as "Latest" state. skipping...
   Exception state (sv=0x38A98780)
      PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
      Backtrace:
         0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
   Exception state (sv=0x37D2EA00)
      PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
      Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
         0x00029234 0x000233F8 0x000ABEAC 0x5038514E
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.GeForce(4.1.8)@0x7ff000
            dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
            dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
            dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
            dependency: com.apple.NVDAResman(4.1.8)@0x636000
   Exception state (sv=0x38A98780)
      PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8 Model: PowerMac3,5, BootROM 4.2.5f1, 1 processors, PowerPC G4 (2.1), 867 MHz, 1.5 GB
Graphics: NVIDIA GeForce2 MX, GeForce2 MX, AGP, 32 MB
Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333
Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333
Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333
Modem: Spring, UCJ, V.90, 7.0F, á¸
Network Service: Built-in Ethernet, Ethernet, en0
Parallel ATA Device: WDC WD1200JB-00GVA0, 111.79 GB
Parallel ATA Device: ST3120814A, 111.79 GB
Parallel ATA Device: PIONEER DVD-RW DVR-103
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Fujitsu Takamisawa Component, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA

Thank you for your reply BDAqua.
Yes I ran short and the Extended Test. All pass. One of the first things I did is Safe Boot several times I also repaired permissions. Safe boot takes no longer than before the crashes and as long as I stay in safe boot mode it won't crash. What does that mean?I also ran MacJanitor and removed the SCCUZI card Apple put in when I bought the G4 as well as an M-Audio Delta 66 card which I do not use (both) anymore. I also started up on an external firewire drive 10.4.6. It also (crashes) does the same thing.
I was hoping somebody understands the crash report I enclosed? Isn't that suppose to say what went wrong?
Thank you again for your input BDAqua
                                                              W.W.

BRAND NEW Mac Pro won't boot from Leopard DVD, kernel panics!

I just received my brand new Mac Pro today. It's a BTO machine with the upgrade to the NVIDIA 8800GT, a second optical drive and a Mac OS X Server license. The system has Mac OS X server installed on the default 320GB drive. I decided to use the server license as a virtual machine running in Leopard client. So, I installed 2 new 500GB Seagate 7200.11 (Retail) drives in the machine, zeroed them out in prep for installing Leopard client.
At this point, I pop in a freshly-purchased retail copy of the Leopard DVD and restart. When I try to boot from the DVD and install Leopard to one of the new Seagate drives, I get kernel panics - need to restart the machine. Also tried booting from the Mac OS X Server DVD and this too only caused kernel panics. The DVD's read perfectly from within Mac OS X Server and boot from hard disks is flawless.
I spent an hour on the phone with a level 2 tech at Apple - Tried swapping out the RAM and moving around the DIMMS to no avail. I am at a loss to what this could be. Seems to be a hardware issue and the tech thought it was likely a problem with one of the memory risers but couldn't send replacements. Anyone else with a similar issue?
This is my first Mac and it looks like this Mac Pro is going back for an exchange and I'll have to wait yet another 10-12 days for a replacement to arrive. Bummer.
Am I missing something simple here? Does this seem to be a hardware issue?
If anyone has any ideas before I ship this one back, please write!!!

New Mac Pros will not install the Leopard retail disc. They will only install the Leopard disc which shipped with them labeled Mac Pro. That has always been true. Macs can only boot the system that ships on DVD in the box that came with them, and newer retail releases. They can never boot from an older retail release than what shipped in the box.

My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

Okay, I seem to have solved the problem I posted about earlier. I noticed that the language preference in the upper right hand corner of the screen (between the date and time and the Spotlight icon) had somehow gotten switched from American English to French. When I switched it back to American English, my password worked when waking the computer from sleep mode. I have no idea why changing the language preference would affect the way the password works but that seems to have been the case. I'll post again if I experience more problems.

Is there a way to disable previously viewed iMessages from appearing as Messages notifications when waking my MacBook Pro from sleep?

Is there a way to disable previously viewed iMessages from appearing as Messages notifications when waking my MacBook Pro from sleep? Regardless of whether I am using iMessage from my iPhone or iPad, when I open my MBP, I get attacked by Messages notifications for iMessages I've obviously already seen or responded to. Is there a way to change this? Are others having this issue?
Additionally, previous iMessages sent or received from those devices sometimes don't populate into the Messages window on the MBP. I haven't been able to identify when or what causes this; sometimes it just doesn't seem to work (and I verified that the messages sent/received were, in fact, iMessages and not SMS).
Thanks - any help or insight would be appreciated!

First you need to determine what laptop model you have; then we can help you. A Mac Book Pro cannot run OS 9.1.
With your Mac booted up, click on the  at the far left of the menu. Then click on About This Mac. It will show what version of OS you are running. What is the version?
A MBP will be running something like version 10.x.
If you are running version OS 9.x, you don't have a Mac Book Pro.
 Cheers, Tom

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting, but the password from the old computer in when waking the computer from sleep.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting the new computer, but the password from the old computer in when waking the computer from sleep. I want to use my iCloud password on both computers consistently. How can I fix this?

The only other place to change a password for the computer login is in Users & Groups preferences. But I don't really know enough here to fix your problem. You can try fixing the keychain:
iCloud- Frequently asked questions about iCloud Keychain
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

Panic(cpu 2 caller 0x001A4A55): Unresolved kernel trap (CPU 2, Type 14=page

Hi I'm getting the following error when I reboot my computer and have to manually hold down the restart key. Does anyone know what this means?
Here is the error:
panic(cpu 2 caller 0x001A4A55): Unresolved kernel trap (CPU 2, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000001, CR3: 0x00da7000, CR4: 0x000006e0
EAX: 0x03ecefc0, EBX: 0x03e0b0c0, ECX: 0x00000000, EDX: 0x03964e90
CR2: 0x00000001, EBP: 0x2514bbf8, ESI: 0x03f37804, EDI: 0x0000001f
EFL: 0x00010202, EIP: 0x00000001, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2514b9c8 : 0x128d08 (0x3cc0a4 0x2514b9ec 0x131de5 0x0)
0x2514ba08 : 0x1a4a55 (0x3d24b8 0x2 0xe 0x3d1cdc)
0x2514bb18 : 0x19aeb4 (0x2514bb30 0x297 0x2514bb68 0x39bce6)
0x2514bbf8 : 0x52e6a6 (0x3f37800 0x46a5c00 0x46a5c04 0x12d97d)
0x2514bc18 : 0x3b4eed (0x46a5c00 0x4b069c 0x2514bc68 0x0)
0x2514bc38 : 0x18795f (0x46a5c00 0x41c8998 0x1d 0x2514bc68)
0x2514bc88 : 0x12b4d7 (0x3f73ba8 0x3f9a56c 0x9 0x11cc32)
0x2514bcc8 : 0x11f1f0 (0x3f73b00 0x2514bd5c 0x24 0x0)
0x2514bd08 : 0x12b6ba (0x3f73b00 0x10000 0x0 0x11f194)
0x2514bd38 : 0x1492f1 (0x2514bd5c 0x24 0x0 0x0)
0x2514bd88 : 0x120221 (0x41c8998 0x1 0x2514bda8 0x0)
0x2514bda8 : 0x12248f (0x41c8998 0x1 0x0 0x140867)
0x2514bdf8 : 0x123691 (0x38aaa78 0x180b 0x40c0f80 0x38dd5f0)
0x2514be38 : 0x13a614 (0x38aaa78 0xcf 0x0 0x41bcdac)
0x2514be88 : 0x33b493 (0x38dd5f0 0x12f471 0x2514bee8 0x38dd5f0)
0x2514bec8 : 0x345947 (0x41bcdac 0xf 0x0 0x0) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOUSBFamily(2.7.5)@0x519000
Kernel version:
Darwin Kernel Version 8.10.1: Wed May 23 16:33:00 PDT 2007; root:xnu-792.22.5~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B08, 4 processors, Dual-Core Intel Xeon, 3 GHz, 2 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.80.79.1)
Network Service: AirPort, AirPort, en2
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: WDC WD2500JS-41SGB0, 232.89 GB
Serial ATA Device: ST3750640AS, 698.64 GB
Serial ATA Device: ST3300622AS, 279.46 GB
Parallel ATA Device: PIONEER DVD-RW DVR-111D
USB Device: iPhone, Apple Inc., Up to 480 Mb/sec, 500 mA
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Keyboard Hub, Apple, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Mitsumi Electric, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Keyboard, Apple, Inc, Up to 1.5 Mb/sec, 220 mA
USB Device: Studio Display, Up to 1.5 Mb/sec, 500 mA
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Studio Display, Up to 1.5 Mb/sec, 500 mA
USB Device: USB Device, Up to 1.5 Mb/sec, 500 mA
FireWire Device: built-in_hub, unknown_value, Unknown

Hi Hatter,
Thank you for the feedback, I am already in the process of doing those steps before I wrote this question. The reason I am posting this is because I would really like to see if others have experienced problems with this. I want to be prepared with information when I have my appointment with the genius bar (this is my production mac and I need to finish up a project before I can get some known issues fixed).
By knowing if others have seen issues with cpu 2 this will help me in understanding the problem and know if I'm getting the correct information from the genius bar. IE I don't want to be back at the bar with my HEAVY mac pro trying to troubleshoot this over a long period of time if someone here has seen a similar message and I can shortcut what might be a long and tedious process of fixing this.
AGAIN, thank you for the feedback but I am doing those steps.

Xorg crashes when suspending to ram using kernel 3.11-rc4

Just doing some testing with 3.11 (rc4) and I find that X crashes when doing a suspend to ram. From my logs:
systemd-sleep[1558]: Suspending system...
kernel: PM: Syncing filesystems ... done.
kernel: PM: Preparing system for mem sleep
systemd-coredump[1561]: Process 929 (Xorg) dumped core.
This aborts the suspend but leaves me with no display and I have to hard reboot. Suspend to ram works fine if just at the console (multi-user.target). Also, using 3.10 works fine with the rest of the system the same.
Does anyone else see this?
I'm using xorg-server 1.14.2-2 and the Radeon driver with the following hardware:
$ lspci -s 01:00.0 -v
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M] (prog-if 00 [VGA controller])
Subsystem: Apple Inc. MacBookPro8,2 [Core i7, 15", Late 2011]
Flags: bus master, fast devsel, latency 0, IRQ 49
Memory at 90000000 (64-bit, prefetchable) [size=256M]
Memory at b0800000 (64-bit, non-prefetchable) [size=128K]
I/O ports at 2000 [size=256]
Expansion ROM at b0820000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
I'm also after debugging tips. How can I recover the core dump from systemd? And how can I get debugging symbols without having to rebuild the binary?

I' using kernel 3.11rc4 with nVidia driver 325.08 that works very well, because system hang when resume from suspend with kernel 3.10.x and sometime kernel 3.9.x
My System:
M/B: ASRock A55 Pro3
CPU: AMD X4 651K
GPU: nVidia GTS 450
RAM: DDR3-1866 4G x 4

My 2009 iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple log

My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Every time I turn the computer off or put it in sleep mode... when I come back my wallpaper is gone. I have to keep going to my pics and getting it back. Does anyone know why this keeps happening??

Every time I turn the computer off or put it in sleep mode... when I come back my wallpaper is gone. I have to keep going back to my pics and getting it back.
Does anyone know why this keeps happening??

Are you choosing it from one of these folders (in my screenshot) or you can also put that picture into the correct folder. The path is:
HD > Library > Desktop Pictures
If you add it to the folder manually, please restart your computer.
And yes, letting it sleep is a good idea, or else the startup disk will spin and the screen may suffer from image persistence if you leave a window or image parked in the same spot too long, so the screensave is a good idea.

I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

Wmorlac wrote:
I have the new IPad and can't connect via bluetooth to any of my apple devices...
Correct... See Supported Bluetooth Profiles Here...
http://support.apple.com/kb/HT3647
Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using. Now, no reactions. What should I do?

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

HT5654 when i am trying to restore my iPhone 5s from the recovery mode,it always stuck when restoring iPhone firmware. The message said " an unknown error occurred (1)". Tried all reboot, restart the iTunes etc. no luck

when i am trying to restore my iPhone 5s from the recovery mode,it always stuck when restoring iPhone firmware. The message said " an unknown error occurred (1)". Tried all reboot, restart the iTunes etc. no luck

we have same problem bro .. i dont know what to do.

My iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in all it does is vibrate. Anyone having this issue??

My Iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in it just vibrates. Anyone having this issue??

I have the same problem with my iPhone 5c after update to iOS 8 every time i have to restart my phone to solve the silent issue

Performing disk reads from within a kernel module

Hi,
i want to perform direct io reads from a specific disk from within a kernel module. i tried to perform a physio call, but although the function returns 0 (success) my buffer has not changed.
any ideas or pointers to example code would be appreciated.
Oren

Hi,
i want to perform direct io reads from a specific disk
from within a kernel module. i tried to perform a
physio call, but although the function returns 0
(success) my buffer has not changed.
any ideas or pointers to example code would be
appreciated.
OrenIt's kinda non-trivial... physio() might be not good enough as if your disk is SCSI it won't perform sync I/O for you - you'd better use the aphysio(), or get the dev_ops of the disk and call it's strategy directly...
Do not forget to set completion (iodone) routine pointer in your buf structure - it'll be called upon I/O completion in asyncronous case. You might then wait on some CV in your I/O routine right after you've dispatched the strategy (either directly, or via aphysio), and in iodone() routine just signal the CV.
Hope this helps,
Ilya.

Kernel Panic when waking from sleep mode., Kernel Panic when waking from sleep mode.

Similar Messages

Maybe you are looking for