Kernel panics - apologies for yet another post but have tried many things

recently started getting regular kernel panics
so far I have:
- cleaned out inside for dust
- connected only keybd and mouse
- disk utility to repair permissions (and applejack)
- reset PRAM, NVRAM, SMU
- changed PRAM battery
- tried new RAM
reboots ok but within a couple of minutes I get the grey screens coming down and requirement to switch off power for a restart
Fans switch in within a minute or so for jet takeoff
temparatures of cpus currently = 46 / 44 / 46 / 46C (using XRG)
last error log
Sat Jan 1 00:04:33 2000
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000004 PC=0x0000000000085D64
Latest crash info for cpu 0:
Exception state (sv=0x5c812c80)
PC=0x00085D64; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x00065230; R1=0x5C7B73E0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00065230 0x000688D4 0x0007295C 0x00072C40 0x000690F8
0x00318100 0x002C8868 0x002CBAC4 0x002CC2B4 0x002B248C 0x002CC9A4 0x002B248C 0x002CDA4C
0x002B0764 0x00BFC208 0x00BFC358 0x00C19D44 0x00C1E54C 0x00C11DF8 0x00C13F54 0x0036011C
0x0003F2A0 0x000B1DD4
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleBCM5701Ethernet(2.2.3b1)@0xc10000->0xc26fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x61c000
dependency: com.apple.iokit.IONetworkingFamily(1.6.1)@0xbf1000
com.apple.iokit.IONetworkingFamily(1.6.1)@0xbf1000->0xc0ffff
Proceeding back via exception chain:
Exception state (sv=0x5c812c80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x5c7f9c80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
System model name: PowerMac11,2
System uptime in nanoseconds: 33066192352
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleTopazAudio 2.5.8f1 - last loaded 956585363
com.apple.driver.AppleOnyxAudio 2.5.8f1
com.apple.GeForcePPC 5.4.8
com.apple.nvidia.nv40halppc 5.4.8
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.driver.AppleTexasAudio 2.5.8f1
com.apple.driver.AppleTexas2Audio 2.5.8f1
com.apple.driver.PowerMac112ThermalProfile 3.4.0d0
com.apple.driver.AppleDACAAudio 2.5.8f1
com.apple.driver.AppleSCCSerial 1.3.2
com.apple.driver.AppleHWSensor 1.9d0
com.apple.driver.IOI2CSMUSat 1.9d0
com.apple.driver.IOI2CLM7x 1.9d0
com.apple.driver.AppleUSBDisplays 2.0.2
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AppleK2Driver 1.7.2f1
com.apple.driver.Apple_iSight 1.1.4
com.apple.driver.IOI2CMaxim6690 1.9d0
com.apple.driver.AppleSMUMonitor 1.9d0
com.apple.driver.IOI2CMaxim1631 1.9d0
com.apple.driver.AppleI2S 1.0.1f1
com.apple.driver.CSRUSBBluetoothHCIController 2.1.9f10
com.apple.driver.IOI2CPulsar 1.5.2d0
com.apple.driver.IOI2CControllerSMU 1.1.1d2
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.driver.AppleUSBHIDMouse 1.2.4b3
com.apple.driver.AppleUSBMergeNub 3.5.2
com.apple.driver.CSRHIDTransitionDriver 2.1.9f10
com.apple.driver.PioneerSuperDrive 2.0.9
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOATABlockStorage 2.0.6
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.5.2
com.apple.iokit.IOATAPIProtocolTransport 1.5.0

struggling to get it to boot up now
even on the boot up process, its often moving to the 'take-off' fan noise before the login screen
if it does boot up then it doesnt last long before the grey screen/restart screen appears
I assume I can use the latest install disk for OSX? (10.5)
ethernet cable not connected, although I had been using ethernet for internet connection recently before relocating the machine
after having changed the PRAM battery, the date is no longer being retained (possibly wrong way around??)
slowly getting frustrated...

Similar Messages

Hey you all, I have recently updated me iPhone 5 to iOS 7.1 and I checked my reminders built in app, and it seems like everything I had in there was lost. I have tried many things, but none seems to work. I can no longer add in any remainders.

Hey you all, I have recently updated me iPhone 5 to iOS 7.1 and I checked my reminders built in app, and it seems like everything I had in there was lost. I have tried many things, but none seems to work. I can no longer add in any remainders.

Have you failed to regularly backup the device to iTunes or iCloud? If so, the data is gone.
If there are backups, restore the most current one from prior to the data disappearing.

Jst got a iphone 4s and my itunes is not picking it up at all i have tried many things from the internet but still not working

Please help ... Stressed new iphone user!!!!!!!!!! lol.
i got a new iphone 4s on friday, people told me i needed to connect this to the itunes asap.
i have had a ipod for 4 years and had no problem connecting to itunes before.
at first my computer would not find the iphone so i looked up tips from apple and other internet sources ... after deleting temp files my computer picked up my iphone but itunes didnt... i kept getting a pop up when going on to itunes saying "this iphone cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install itunes again.
So i did i did this serveral times and the pop still keeps coming up and everytime i reinstall itunes i have to delete temp files for my computer to pick my iphone up. i contacted apple and an adviser sent me a link to follow to delete itunes and other in a order which i did several times and still not worked.
i tried my iphone on my mums computer and it has picked it up but in my mums itunes i want my itunes as i have purchased many songs. now my ipod wont even register to itunes. i also get a pop up from windows saying Host process for windows services stopped working and was closed ... i ahve followed all the advice for that even a clear up on my computer and still nothing. you can even find apple mobile device anywhere on the computer tho my mobile is charging when plugged in. i have tried everything that apple reccomends anyone able to help
Thank you

Try this article if you haven't already
This is the only possibility that came to my mind when reading about your issue:
"If an iPhone, iPad, or iPod touch is not recognized in iTunes on Windows, the Apple Mobile Device Service (AMDS) may need to be restarted"

How can I save to web without getting error messages and having my computer tell me there is no memory or freezing up and shutting down? I've read many other suggestions but have tried those things and none have worked. I have photoshop 12.

Photoshop: Selecting Save for Web gives error: "Could not complete this operation. An unknown operating system error has occurred."
I have tried all of the solutions I've found, but none work for me or my two systems (windows 7 and windows 8.1)
Many times I get the message only when saving a web file that there is not enough memory: My windows 8 has 2 TB and 10 Gigs of ram. I took it into the shop to see if something was wrong with the hard drive or ram, but when I hooked up my windows 7, I'm having the exact same issues. Please help.
I tried this:
I set ram to 100%, I changed my preferences in editor to not run anything to do with auto analyzer, I renamed the file auto analyzer to put a space in as someone said to do... I even did the following...
Reset Photoshop's Save For Web preferences:
1. Quit Photoshop
2. Delete the "Adobe Save For Web 12.0 Prefs" file:
Mac: Users/[Username]/Library/Preferences/Adobe Save For Web 12.0 Prefs
Windows XP: Documents and Settings/[Username]/Application Data/Adobe/Save For Web/12.0/Adobe Save For Web 12.0 Prefs
Windows 7 and Vista: Users/[Username]/AppData/Roaming/Adobe/Save For Web/12.0/Adobe Save For Web 12.0 Prefs
Whenever I "save for web" and save something to the root of C:/ it will work, but the next time I "save for web" it produces the error. I was able to fix it by going into User Account Control settings and scaling down to "never notify." It requires a reboot, but the next time I "saved for web" it worked fine.
If you do this, be sure to change the UAC back to "default" as it is a security measure.
FYI you will have to restart anytime you tweak UAC.
To change UAC in Win 7 go to control panel>Action Center>Change User Account Control Settings and drag the slider to "never notify."

Try this: press F10 or tap the Alt key to display the menu bar temporarily, then
View > Toolbars > Menu Bar
If that doesn't work, you could reset your toolbars to factory default using Firefox's Safe Mode. First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, start Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode], and check only the box to reset toolbars. Be careful not to "reset" anything else if you didn't back up.
Hope this helps.

Any Help For Yet Another HDCP For Playback/Netflix Problem?

I have a very complex set-up and had no problem streaming until the other night and I have tried every single solution I can find online under the sun so that is why I am posting here.
I have a Pioneer Receiver that I used a Terk Smart HDMI 3 x 1 Selector with and was able to stream Netflix with no problem.
This is how everything used to be set up:
Pioneer Receiver
Blu-ray IN
HDMI OUT Terk
DVD IN
Panasonic DVD Recorder OUT
OUT
Panasonic LCD TV HDMI 1
Terk HDMI 3 x 1 Selector
OUT
Pioneer Receiver Bluray IN
Panasonic Bluray Player
Input 1
AppleTV (3rd Gen.)
Input 2
Mac Mini (2010)
Input 3
Now here's the rub: I also have a PS3. I used to unplug either the ATV or Mini whenever I wanted to use it and I got tired of switching out so I bought a Monoprice 8 x 1 HDMI Selector. The logic here being that I would have more than enough HDMI inputs to plug in everything.
When I first hooked up the Monoprice, I hooked the OUT from it into the Bluray IN on the Pioneer and then hooked all of the HDMI cables from all of the various electronics into the INputs on it. Tested all of them to see that it autoselected whatever I had chosen and even was able to stream on NF.
This is how I have everything hooked up now:
Monoprice 8 x 1
OUT
Pioneer Receiver Bluray IN
ATV
Input 1
Panasonic Bluray Player
Input 2
PS3
Input 3
Mac Mini
Input 4
Panasonic DVD Recorder*
Input 5
*Bluray IN and OUT are the only HDMI slots in use on the Pioneer Receiver using this hookup.
Now all of a sudden yesterday I went to stream NF via the ATV and I got that "This content requires HDCP for playback" error.
I did everything I could think of and also tried all of the suggestions I could find on the web. I had already switched out the HDMI cables as I had bought new ones when I got the Monoprice. So I hooked the Terk back up thinking it would "fix" things. No dice. I put the old HDMI cables back on. No dice. I have it hooked up now with the old HDMI cables and still no dice. I unplugged everything and let it sit thinking I could force a new HDMI handshake. NF started streaming for 5 seconds and froze -- and then the error message.
I also have a Scientific Atlanta DVR that the ATV is plugged into that the HDMI 2 of the Panasonic TV is connected via HDMI. The Panasonic TV isn't "old" as I think I got it in late 2009 or late 2010, as it has more than enough HDMI inputs, component, and also a PC connection -- in case someone wanted to suggest the TV wasn't capable of handling the hookups. The ATV is running the latest version of the software.
This is really frustrating since it worked with no problem from the day I got the ATV and now after upgrading the switcher to get more HDMI inputs, everything went kaput.
And I just don't know what to do.
I'm not sure if having everything being dependent upon the Panasonic TV being powered on is affecting things, but it never affected things when I was using the 3 x 1 HDMI switch. When I wanted to use the ATV, I'd press the Bluray input on the Pioneer receiver, hit the ATV remote and it would come on. Click into NF and voila: streaming with no problems.
Currently, I still do the same thing -- and I can listen to the radio, stream in iTunes Match on the ATV. It's just the NF issue that's really beyond me. The only thing I can think of to try is to maybe put the DVR in the surge protector slot so that it has to be powered on so that everything else will power up instead of the TV?
I'm hoping someone has a suggestion that involves something other than restarting/restoring the ATV, or unplugging things for 30 seconds because I have tried everything I've come across. I just don't know what to do but I really would like to be able to use NF on the ATV because I like the fact that it plays in Dolby, and I really don't want to have to go back to the PS3 to utilize that feature.
In the meantime, I guess I will switch the DVR on the surge protector with the TV and see what happens if I change the way things power up in the chain.

I am at a loss. I thought I had a micro USB cord but since I didn't, I wasn't able to downgrade the software.
I did a complete restore for kicks.
This is the current setup
ATV HDMI
Panasonic TV HMDI 2
ATV optical output
Pioneer Receiver
Again, all of the other devices run through the 8 x 1 switch box which is NOT powered on to use the ATV.
I get the HDCP error whenever I try to access the following:
Netflix
Trailers
Vimeo
WSJ Live
HHL and the other sports channels
These work fine:
Radio
iTunes Match
Podcasts
Flickr
TV Shows and Movies because I tested both watching previews and they streamed perfectly
I've changed the settings on the ATV until I'm blue in the face and this is what they are currently:
Dolby - Auto
Audio Output - Auto
HDMI Output - Auto
TV Resolution - 1080p HD - 60Hz -- and yes I've had it set on both "Auto" and 720p HD - 60Hz and neither stopped the error once it started happening
All of the equipment is HDCP compliant as I checked
The cable between the TV and ATV
The 8 x 1 switch box
Panasonic TV specs -- it is HDCP compliant as I said in my 3rd post (according to the manual)
The Pioneer Receiver (for good measure)
I have no idea of what to do other than to hope that Apple does something with the next update to restore everything, as this HDCP issue is really beyond annoying and it's clear 5.2 broke something. In the meantime, I really am open to suggestions to try something else other than smashing the ATV with a hammer

Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

No.
OT

I have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and i

hi can anyone help please ? i have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and iphone / ipad but can't get it to work, they say discoverable but just will not connect to one another. I also tried the connection code and tried without one ... NO JOY ... Is this common or am i a twit ?

You can't connect an iPhone or iPad to a Mac via Bluetooth, except for Internet tethering.
You're not doing anything wrong - it just isn't a feature of iOS devices.
What were you hoping a Bluetooth connection would allow you to do?

When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to

When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to do with the use of my Wacom3 Tablet...I've been having trouble with it and was getting the same message when trying to open the User's Manual in my Applications/WacomTablet file on my hard drive. Any suggestions? I just downloaded the latest version for the Wacom and recently upgraded to Snow Leopard 10.6.7 (which I hate, and my CS3 hates, etc.)

It sounds like you have a a password-protected PDF. The password was set by the person who encoded it.

What do I do if I have one Apple ID for my phone and a different one for my mac. I have tried to sync garageband to my mac from my phone but it won't connect. Is it because of the different ID's? If so what can I do to fix it?

What do I do if I have one Apple ID for my phone and a different one for my mac. I have tried to sync garageband to my mac from my phone but it won't connect. Is it because of the different ID's? If so what can I do to fix it?

You can use one account with iTunes on your Mac, and different account(s) with the Mac App Store (for buying/downloads apps or OS updates for your Mac), iCloud (System Preferences > iCloud) and Messages (Messages > Preferences, or command-comma)

Hi, I am trying to download the trial version of photoshop but it is stuck on 42% (has been for several hours). I have tried refreshing but it doesn't work. I am using Yosemite OS X.

Hi, I am trying to download the trial version of photoshop but it is stuck on 42% (has been for several hours). I have tried refreshing but it doesn't work. I am using Yosemite OSX 10.10.3. Any suggestions?

Re: creative cloud hangs at 42%

I just purchased a subscription for the standard version but have now found out that I can't download to Mac. Is this correct? So my only choice is to updgrate to Pro?

I just purchased a subscription for the standard version but have now found out that I can't download to Mac. Is this correct? So my only choice is to updgrate to Pro?

Not sure if you can just upgrade as you have to cross platform too. Best to ask Adobe CHAT. You might need to refund and start again.

Attempting to download Maverick it has been running for nearly 24hrs. I have tried shutting down the computer but the setup assistant keeps canceling the shut down.

Attempting to download Maverick it has been running for nearly 24hrs. I have tried shutting down the computer but the setup assistant keeps canceling the shut down.

Just hold down the power button for about ten seconds and the machine will turn off.
I'm not sure how fast your Internet speed is but my Mavericks downloads usually only take about 20-25 minutes for a 5.33GB file.
No telling what will be waiting for your when you power back on... call back if you can't login to your computer.
Clinton

I have used fire fox for a long time but have nothing but problems loading web sites..i think the time has come to uninstall firefox and go with internet explore..im tired of wasting my time trying to load web pages.

Question
i have used fire fox for a long time but have nothing but problems loading web sites..i think the time has come to uninstall firefox and go with internet explore..im tired of wasting my time trying to load web pages.

does not solve problem..guess i'll have to get rid of firefox..never had problen before but to much hassle loading web sites.

HT3775 I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDI

I cannot get itunes to work/install on myPC. I am running windows 8 in a 64 bit machine. I also want to purchase books via itunes for my Nook. Are you deliberately excluding PC owners so we cannot use ituens on our computers???? I have selected a community but have no idea what community I should be working with. Can somone explai these communities to me? Also. you don't allow much time to go thru the sign up process. I had to start over SEVERAL times as you kept timing me out. Jesus...when people are signing up for the first time, we have no idea of the questions that will be asked. Give us a break and give us time to sign up. Not everone is disability free and able to go thru your process quickly...you are NOT user friendly. You should be for people who are wanting to join your community. I used to want an Apple product but now that I have had first hand experience with your web page, I think I will probably stay away from Apple products. VERY DISAPPOINTING

Jan 11, 2014 10:26 AM Re: I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDING
Re: I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDING PC'S in response to Birdlover1
Post over in the iTunes for Windows forum, here:
https://discussions.apple.com/community/itunes/itunes_for_windows
sebastian

Can any one help me to configure the mysql table to enable user expiration to function, I have tryed most things, but not dates are being passed back to the data base from the form

Im trying to build user expiration into my registration form, but I cant get the form to send back the date registering.
in my data base i have tried every thing from timestamp to datetime. I can get a timestamp but it is not functioning with the expiration?

just have a look at my tutorial Login tables: installation & configuration where the required column attributes are explained and where you can obtain a fully functional SQL dump for a typical ADDT "login" and (optionally) "login_stats" table.
BTW, "expiration" will have to be an "int" column.
Cheers,
Günter

Kernel panics - apologies for yet another post but have tried many things

Similar Messages

Maybe you are looking for