Kernel Panics Every Day need some help
I had another post thinking Safari was the cause but now I'm gettin them in Entourage, Word, during a quicktime update. Here's a screen shot of the panic (I happened to have my Camera). I'm on 10.4.9, 1.5 gig ram. Apple just replaced my screen because it went bad & to be honest that's when these panics started happening can there be a corolation ?
<center>
</center>
PowerBook G4 Mac OS X (10.4.2)
check your ram with apple hardware test CD, or use memtest
http://www.versiontracker.com/dyn/moreinfo/macosx/17156
Similar Messages
-
Several kernel panics every day
I am plagued with several kernel panics every day. I have reset the pram, and done a clean start several times, but it keeps happening. This morning it happened while I was downloading something that should not have been interrupted, causing an operator panic. This started about a month ago - once every couple of days. Now it is several times a day. It doesn't seem to matter what I'm doing.
What else can I do? I live abaout 70 miles from the nearest apple retailer/repair shop, so anything I can do myself would be great!
Thank You!What does the Mbox 2 Mini manufacturer say?
For KPs, see these:
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics -
Hi,
I have a Retina MacBook Pro (purchased at announcment day)
Spec:
2.7 GHz Intel Core i7
16GB RAM
NVIDIA GeForce GT 650M, 1024 MB
OS X 10.8.2 (12C3006)
I have Little Snitch, Starcraf 2, Steam - Counter Strike GO, VMFusion, Paragon NTFS, Undercover, 1Password and CleanMyMac installed and all the default Apps
I have formatted my SSD multiple times (As its easy to setup my laptop again) and reinstalled ML directly from Appstore and Mounted on a USB Stick.
This Happens EVERYday after waking my laptop from sleep (which suggests its something todo with an extentsion that runs at boot), it doesnt matter if its connected to Power, Wifi, my Time Capsule...all sorts of stuff ive tried.
Any Ideas?
My Nearest Apple Store is 40min away (just for reference)
From Crash Report
Interval Since Last Panic Report: 92078 sec
Panics Since Last Report: 7
Anonymous UUID: E768CD68-558C-FE87-3088-C0FE708E5699
Thu Dec 6 21:57:33 2012
panic(cpu 4 caller 0xffffff80020b7e75): Kernel trap at 0xffffff7f8384a2c4, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x000000003cc51027, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0xffffff81a1c3d000, RCX: 0xffffff802445e000, RDX: 0xffffff81d2333a38
RSP: 0xffffff81d2333b60, RBP: 0xffffff81d2333b60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff81a1c3d000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f8384a2c4, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff81d2333800 : 0xffffff800201d626
0xffffff81d2333870 : 0xffffff80020b7e75
0xffffff81d2333a40 : 0xffffff80020cd3bd
0xffffff81d2333a60 : 0xffffff7f8384a2c4
0xffffff81d2333b60 : 0xffffff7f83834358
0xffffff81d2333bb0 : 0xffffff7f838342ae
0xffffff81d2333bd0 : 0xffffff7f838054be
0xffffff81d2333c00 : 0xffffff7f826cb3c0
0xffffff81d2333c40 : 0xffffff7f826cb32f
0xffffff81d2333c60 : 0xffffff7f826d0758
0xffffff81d2333cf0 : 0xffffff7f826c8e70
0xffffff81d2333d20 : 0xffffff7f8271940b
0xffffff81d2333d70 : 0xffffff8002432dbb
0xffffff81d2333dc0 : 0xffffff8002463437
0xffffff81d2333e30 : 0xffffff8002097fcf
0xffffff81d2333e80 : 0xffffff8002020aed
0xffffff81d2333eb0 : 0xffffff8002010448
0xffffff81d2333f00 : 0xffffff800201961b
0xffffff81d2333f70 : 0xffffff80020a5db6
0xffffff81d2333fb0 : 0xffffff80020cdc23
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f826bf000->0xffffff7f826f6fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f82681000
com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7f827 16000->0xffffff7f82a25fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f82681000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[6A1A36AC-2F79-34AF-A162-A97FE16705E3]@0xff ffff7f82702000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f826bf000
com.apple.GeForce(8.0.6)[105BACF2-DA7F-3FD1-8BD0-61941FEC6BDD]@0xffffff7f838040 00->0xffffff7f838c8fff
dependency: com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7f827 16000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[6A1A36AC-2F79-34AF-A162-A97FE16705E3]@0xff ffff7f82702000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f82681000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f826bf000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12C3006
Kernel version:
Darwin Kernel Version 12.2.1: Thu Oct 18 16:32:48 PDT 2012; root:xnu-2050.20.9~2/RELEASE_X86_64
Kernel UUID: 0AFA55FD-872F-3BBE-8630-214EB586A16D
Kernel slide: 0x0000000001e00000
Kernel text base: 0xffffff8002000000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 37925433530
last loaded kext at 37216090165: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f825eb000, size 229376)
loaded kexts:
com.paragon-software.filesystems.ntfs 100
at.obdev.nke.LittleSnitch 3892
com.apple.filesystems.smbfs 1.8
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.1.2f9
com.apple.driver.AGPM 100.12.81
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.5fc10
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleHDA 2.3.5fc10
com.apple.iokit.IOBluetoothUSBDFU 4.1.2f9
com.apple.driver.AppleIntelHD4000Graphics 8.0.6
com.apple.GeForce 8.0.6
com.apple.driver.AppleBacklight 170.2.5
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleIntelFramebufferCapri 8.0.6
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.5fc10
com.apple.nvidia.NVDAStartup 8.0.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.2.13
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.13
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBTCKeyEventDriver 237.1
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.driver.AppleUSBHub 5.5.0
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleSDXC 1.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.5.0b9
com.apple.driver.AirPort.Brcm4331 612.20.14
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBXHCI 1.5.1
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.5fc10
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.nvidia.nvGK100hal 8.0.6
com.apple.NVDAResman 8.0.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.9
com.apple.driver.AppleHDAController 2.3.5fc10
com.apple.iokit.IOHDAFamily 2.3.5fc10
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.3.0d47
com.apple.iokit.IOSurface 86.0.3
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOBluetoothFamily 4.1.2f9
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleGraphicsControl 3.2.13
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMergeNub 5.5.0
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.driver.AppleThunderboltNHI 1.6.3
com.apple.iokit.IOThunderboltFamily 2.1.8
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 510.4
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBUserClient 5.5.0
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBFamily 5.5.0
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.7 GHz, 16 GB, SMC 2.3f32
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80CE, 0x4D34373142314737334248302D434B302020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80CE, 0x4D34373142314737334248302D434B302020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.14)
Bluetooth: Version 4.1.2f9 11046, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM512E, 500.28 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2512, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0263, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 6
This is from Console:
Wed Dec 5 14:53:26 2012
panic(cpu 4 caller 0xffffff8027cb7e75): Kernel trap at 0xffffff7fa944a2c4, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x00000000497ff023, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0xffffff81c7825000, RCX: 0xffffff804a31c000, RDX: 0xffffff81f85bba38
RSP: 0xffffff81f85bbb60, RBP: 0xffffff81f85bbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff81c7825000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7fa944a2c4, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff81f85bb800 : 0xffffff8027c1d626
0xffffff81f85bb870 : 0xffffff8027cb7e75
0xffffff81f85bba40 : 0xffffff8027ccd3bd
0xffffff81f85bba60 : 0xffffff7fa944a2c4
0xffffff81f85bbb60 : 0xffffff7fa9434358
0xffffff81f85bbbb0 : 0xffffff7fa94342ae
0xffffff81f85bbbd0 : 0xffffff7fa94054be
0xffffff81f85bbc00 : 0xffffff7fa82cb3c0
0xffffff81f85bbc40 : 0xffffff7fa82cb32f
0xffffff81f85bbc60 : 0xffffff7fa82d0758
0xffffff81f85bbcf0 : 0xffffff7fa82c8e70
0xffffff81f85bbd20 : 0xffffff7fa831940b
0xffffff81f85bbd70 : 0xffffff8028032dbb
0xffffff81f85bbdc0 : 0xffffff8028063437
0xffffff81f85bbe30 : 0xffffff8027c97fcf
0xffffff81f85bbe80 : 0xffffff8027c20aed
0xffffff81f85bbeb0 : 0xffffff8027c10448
0xffffff81f85bbf00 : 0xffffff8027c1961b
0xffffff81f85bbf70 : 0xffffff8027ca5db6
0xffffff81f85bbfb0 : 0xffffff8027ccdc23
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7fa82bf000->0xffffff7fa82f6fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa8281000
com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7fa83 16000->0xffffff7fa8625fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa8281000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[6A1A36AC-2F79-34AF-A162-A97FE16705E3]@0xff ffff7fa8302000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7fa82bf000
com.apple.GeForce(8.0.6)[105BACF2-DA7F-3FD1-8BD0-61941FEC6BDD]@0xffffff7fa94040 00->0xffffff7fa94c8fff
dependency: com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7fa83 16000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[6A1A36AC-2F79-34AF-A162-A97FE16705E3]@0xff ffff7fa8302000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa8281000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7fa82bf000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12C3006
Kernel version:
Darwin Kernel Version 12.2.1: Thu Oct 18 16:32:48 PDT 2012; root:xnu-2050.20.9~2/RELEASE_X86_64
Kernel UUID: 0AFA55FD-872F-3BBE-8630-214EB586A16D
Kernel slide: 0x0000000027a00000
Kernel text base: 0xffffff8027c00000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 36830025316
last loaded kext at 11686644624: com.apple.driver.AppleBluetoothHIDMouse 175.8 (addr 0xffffff7fa9cc3000, size 20480)
loaded kexts:
com.paragon-software.filesystems.ntfs 100
at.obdev.nke.LittleSnitch 3892
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.1.2f9
com.apple.driver.AGPM 100.12.81
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.5fc10
com.apple.driver.AppleHDA 2.3.5fc10
com.apple.GeForce 8.0.6
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMikeyDriver 2.3.5fc10
com.apple.iokit.IOBluetoothUSBDFU 4.1.2f9
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleIntelHD4000Graphics 8.0.6
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.nvidia.NVDAStartup 8.0.6
com.apple.driver.AppleIntelFramebufferCapri 8.0.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.13
com.apple.driver.AppleMuxControl 3.2.13
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBTCKeyEventDriver 237.1
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.driver.AppleUSBHub 5.5.0
com.apple.driver.AppleSDXC 1.4.0
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.iokit.AppleBCM5701Ethernet 3.5.0b9
com.apple.driver.AirPort.Brcm4331 612.20.14
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBXHCI 1.5.1
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleBluetoothHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.driver.IOBluetoothHIDDriver 4.1.2f9
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.5fc10
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.nvidia.nvGK100hal 8.0.6
com.apple.NVDAResman 8.0.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.AppleHDAController 2.3.5fc10
com.apple.iokit.IOHDAFamily 2.3.5fc10
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.3.0d47
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.9
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.1.2f9
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleGraphicsControl 3.2.13
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMergeNub 5.5.0
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.driver.AppleThunderboltNHI 1.6.3
com.apple.iokit.IOThunderboltFamily 2.1.8
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 510.4
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBUserClient 5.5.0
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBFamily 5.5.0
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0Me too, basically, multiple times a day, brand new machine. I *am* running at fake 1920 x 1200.
Seems like this is *invariably* in the stack trace†:
com.apple.NVDAResman
Is that a NVidia resolution manager? Hmmm.
† e.g.
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7f8dcd 9000->0xffffff7f8dfe8fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[7EECA562-F708-37FF-9757-CA9C98939903]@0xffff ff7f8dc44000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[6A1A36AC-2F79-34AF-A162-A97FE16705E3]@0xff ffff7f8dcc5000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f8dc82000
com.apple.nvidia.nvGK100hal(8.0.6)[2D2A14D2-AF55-3425-81E1-FE506CA5DAC7]@0xfffff f7f8dff6000->0xffffff7f8e2fcfff
dependency: com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7f8dc d9000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[7EECA562-F708-37FF-9757-CA9C98939903]@0xffff ff7f8dc44000
com.apple.driver.AGPM(100.12.81)[6BD7C567-9C88-387C-8264-A6AB64BBC686]@0xffffff7 f8f81a000->0xffffff7f8f829fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[7EECA562-F708-37FF-9757-CA9C98939903]@0xffff ff7f8dc44000
dependency: com.apple.driver.IOPlatformPluginFamily(5.3.0d47)[B7A925C7-C702-3427-8FC6-69621 C3EE33F]@0xffffff7f8e785000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[6A1A36AC-2F79-34AF-A162-A97FE16705E3]@0xff ffff7f8dcc5000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f8dc82000 -
Hello Every one , need some help
I am New to SAP BI .
Please Provide some useful links to knowa about the Concepts in it
Thanks in advance
Nikhil KHi Nikhil,
Please refer to following links:
http://wiki.sdn.sap.com/wiki/display/BI/Beginner+Section
http://help.sap.com/saphelp_nw04s/helpdata/en/f1/0a5529e09411d2acb90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Also you can refer to the book "A Practical Guide to SAP NetWeaver Business Warehouse 7.0" by Bharat Patel, Amol Palekar, and Shreekant Shiralkar for better understanding.
This book provides good screen shots also.
Also please search in SCN before posting this type of repeated questions.
Regards,
Harish. -
hi i am from india and i am using iphone 5 but i have problem with charging last 20 % suddenly my phone switched off every day and som heating when i am using internate pls help me where i can check whether my phone waranty is valid on expire
https://selfsolve.apple.com/agreementWarrantyDynamic.do
-
I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report: 8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE 1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker. -
12-inch G4 powerbook 1.0GHz has kernel panics every restart
I have a 12-inch G4 powerbook 1.0Ghz machine that keeps having kernel panics every restart.
I have run the Apple Hardware Test, and this comes back fine saying there is nothing wrong with any of the hardware. I have reset the PRAM, and repaired the disc permissions.
I thought it might be a software issue, so I archived and re-installed the system software. Still didnt work. Then I tried the erase and install, still didnt work.
Is there anything else I can check to see what is causing the kernel panic. Anything else I can use to test the hardware to make sure. I have a bad feeling it is the logicboard even though the Apple Hardware Test said it was fine.
The kernel panic is also not even creating a log, so I cannot even let you know why it is causing the kernel panic. Any help will be much appreciatedgazo:
Glad removing the Airport Extreme card worked. You can try wiping off the contacts with a lint free cloth, and replacing the Airport card making sure it is securely seated. Sometimes heating and cooling along with the normal handling of a laptop dislodges the card enough to cause problems. If that doesn't help you will need to get a new card.
cornelius
PS: Thank you for leaving feedback in Apple Discussions by marking the "solved" post. -
I use my PowerPC Quicksilver G4 (2.1), 867 MHz, 1.5 GB standart video card system 10.4.11 to scan (lack of driver for my Mac Pro 10.6.8)
The G4 has been running flawless, now I get kernel panics every time (shut down your computer). When it stays on I get blotched video
left-over spots, tearig and then shut down your computer...
I did all recommended software tests Diskutility, rebuild with DiskWarrior and Apples full Hardware test. Everything comes out fine!
I am at the end of my know how. Thank you for any help
W.W.
I am attaching the latest crashreport:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000047AC834E PC=0x0000000000821D3C
Latest crash info for cpu 0:
Exception state (sv=0x37D2EA00)
PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
0x00029234 0x000233F8 0x000ABEAC 0x5038514E
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Proceeding back via exception chain:
Exception state (sv=0x37D2EA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x38A98780)
PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x37D2EA00)
PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
0x00029234 0x000233F8 0x000ABEAC 0x5038514E
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Exception state (sv=0x38A98780)
PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8 Model: PowerMac3,5, BootROM 4.2.5f1, 1 processors, PowerPC G4 (2.1), 867 MHz, 1.5 GB
Graphics: NVIDIA GeForce2 MX, GeForce2 MX, AGP, 32 MB
Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333
Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333
Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333
Modem: Spring, UCJ, V.90, 7.0F, á¸
Network Service: Built-in Ethernet, Ethernet, en0
Parallel ATA Device: WDC WD1200JB-00GVA0, 111.79 GB
Parallel ATA Device: ST3120814A, 111.79 GB
Parallel ATA Device: PIONEER DVD-RW DVR-103
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Fujitsu Takamisawa Component, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mAThank you for your reply BDAqua.
Yes I ran short and the Extended Test. All pass. One of the first things I did is Safe Boot several times I also repaired permissions. Safe boot takes no longer than before the crashes and as long as I stay in safe boot mode it won't crash. What does that mean?I also ran MacJanitor and removed the SCCUZI card Apple put in when I bought the G4 as well as an M-Audio Delta 66 card which I do not use (both) anymore. I also started up on an external firewire drive 10.4.6. It also (crashes) does the same thing.
I was hoping somebody understands the crash report I enclosed? Isn't that suppose to say what went wrong?
Thank you again for your input BDAqua
W.W. -
Please I need some help with a table
Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
CraigHi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
dp = dialog;
try {
jbInit();
catch (Exception exception) {
exception.printStackTrace();
public tablePanel() {
try {
jbInit();
catch (Exception exception) {
exception.printStackTrace();
private void jbInit() throws Exception {
jPanel.setLayout(borderLayout1);
scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
this.add(jPanel);
jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
scrollPane1.getViewport().add(table);
jPanel.setOpaque(true);
newTable();
addToModel();
addRows();
setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
String name = (String) table.getValueAt(i, 1);
if (!"".equals(name)) {
if (i != table.getRowCount() - 1) {
double dt = Double.parseDouble(name);
total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
model = new DefaultTableModel(data, columnNames) {
table = new JTable() {
public Component prepareRenderer(TableCellRenderer renderer,
int row, int col) {
Component c = super.prepareRenderer(renderer, row, col);
if (printing) {
c.setBackground(getBackground());
else {
if (row % 2 == 1 && !isCellSelected(row, col)) {
c.setBackground(getBackground());
else {
c.setBackground(new Color(227, 239, 250));
if (isCellSelected(row, col)) {
c.setBackground(new Color(190, 220, 250));
return c;
table.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
if (e.getClickCount() == 2) {
if (e.getClickCount() == 1) {
if (table.getSelectedColumn() == 1) {
table.setTableHeader(null);
table.setModel(model);
scrollPane1.getViewport().add(table);
table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
Object[] data = {
"Price", "5800"};
model.addRow(data);
public void addRows() {
int rows = 20;
for (int i = 0; i < rows; i++) {
Object[] data = {
model.addRow(data);
public void printOut() {
PrinterJob pj = PrinterJob.getPrinterJob();
pj.setPrintable(tablePanel.this);
pj.printDialog();
try {
pj.print();
catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
Graphics2D g2 = (Graphics2D) g;
g2.setColor(Color.black);
int fontHeight = g2.getFontMetrics().getHeight();
int fontDesent = g2.getFontMetrics().getDescent();
//leave room for page number
double pageHeight = pageFormat.getImageableHeight() - fontHeight;
double pageWidth = pageFormat.getImageableWidth();
double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
double scale = 1;
if (tableWidth >= pageWidth) {
scale = pageWidth / tableWidth;
double headerHeightOnPage = 16.0;
//double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
//System.out.println("this is the hedder heigth " + headerHeightOnPage);
double tableWidthOnPage = tableWidth * scale;
double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
double pageHeightForTable = oneRowHeight *numRowsOnAPage;
int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
if (pageIndex >= totalNumPages) {
return NO_SUCH_PAGE;
g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
g2.translate(0f, headerHeightOnPage);
g2.translate(0f, -pageIndex * pageHeightForTable);
//If this piece of the table is smaller
//than the size available,
//clip to the appropriate bounds.
if (pageIndex + 1 == totalNumPages) {
int lastRowPrinted =
numRowsOnAPage * pageIndex;
int numRowsLeft =
table.getRowCount()
- lastRowPrinted;
g2.setClip(0,
(int) (pageHeightForTable * pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(oneRowHeight *
numRowsLeft));
//else clip to the entire area available.
else {
g2.setClip(0,
(int) (pageHeightForTable * pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(pageHeightForTable));
g2.scale(scale, scale);
printing = true;
try {
table.paint(g2);
finally {
printing = false;
//tableView.paint(g2);
g2.scale(1 / scale, 1 / scale);
g2.translate(0f, pageIndex * pageHeightForTable);
g2.translate(0f, -headerHeightOnPage);
g2.setClip(0, 0,
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(headerHeightOnPage));
g2.scale(scale, scale);
//table.getTableHeader().paint(g2);
//paint header at top
return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
public Component getTableCellRendererComponent(
JTable table,
Object value,
boolean isSelected,
boolean isFocused,
int row, int column) {
setHorizontalAlignment(SwingConstants.RIGHT);
Component component = super.getTableCellRendererComponent(
table,
value,
isSelected,
isFocused,
row,
column);
if( value == null || value .equals("")){
( (JLabel) component).setText("");
}else{
double number = 0.0;
number = new Double(value.toString()).doubleValue();
DecimalFormat df = new DecimalFormat(",##0.00");
( (JLabel) component).setText(df.format(number));
return component;
} -
My airport problem has returned big time --Need some Help!!
Aloha once again:
I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
Dan Page
Maui, Hawaii
The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
Still need some help!!!
DanFirst, power off both the Time Capsule and AirPort Express.
Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible.
Please report on your results. -
1-2 Kernel panics a day after 10.5.7 update
After updating to 10.5.7 I'm getting 1-2 kernel panics per day. I have tried the following:
* Downloaded 10.5.7 combo and reinstalled
* Run the memory test by booting up on the CD that came with the machine
* Run disk utility and verirified the hard disk is ok
* Repaired all permissions
* Reset the PRAM by pressing Command, Option, P, and R during boot up
None of the above has worked.
The kernel panic occurs during various processes but the log always says the following:
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(76.0.0)@0xb11000->0xb2ffff
Below is one example of the panic log.
Any suggestions on how I can fix this?
Thanks!
The latest panic log:
Thu Jun 4 21:52:35 2009
panic(cpu 1 caller 0x001AB0FE): Kernel trap at 0x00b13980, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x7c14b68b, CR3: 0x0189a000, CR4: 0x00000660
EAX: 0x9f052c78, EBX: 0x000004ab, ECX: 0x9f052c78, EDX: 0x000004ab
CR2: 0x7c14b68b, EBP: 0x30547d78, ESI: 0x001aa13d, EDI: 0x042ef500
EFL: 0x00010046, EIP: 0x00b13980, CS: 0x00000008, DS: 0x3e350010
Error code: 0x00000000
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x30547ab8 : 0x12b4c6 (0x45ec20 0x30547aec 0x13355c 0x0)
0x30547b08 : 0x1ab0fe (0x468ecc 0xb13980 0xe 0x468678)
0x30547be8 : 0x1a1703 (0x30547c00 0x2d 0x30547d78 0xb13980)
0x30547bf8 : 0xb13980 (0xe 0x48 0x9f020010 0x4f0010)
0x30547d78 : 0xb1422e (0x9f02141c 0x800004ab 0x0 0x0)
0x30547e38 : 0x1ac348 (0xffffffff 0x7fffffff 0x30547ea8 0x2a275000)
0x30547e58 : 0x1358e1 (0x2a2754c0 0x9f021191 0x4ab 0x2a2754ac)
0x30547ea8 : 0x136217 (0x1 0x43792e8 0x42254a4 0x0)
0x30547f18 : 0x136e7c (0x4379304 0x4379304 0x30547f78 0x1414bc)
0x30547f58 : 0x136efd (0x13eaf5 0x522b60 0x0 0x1a436f)
0x30547f78 : 0x13ec8f (0x13eaf5 0x522b60 0x0 0x0)
0x30547fc8 : 0x1a14ec (0x522b60 0x0 0x1a40b5 0x4e67208)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(76.0.0)@0xb11000->0xb2ffff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9J61
Kernel version:
Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
System model name: MacBook5,1 (Mac-F42D89C8)
System uptime in nanoseconds: 5135154039165
unloaded kexts:
com.apple.driver.InternalModemSupport 2.4.0 - last unloaded 121303984498
loaded kexts:
com.apple.driver.AppleHWSensor 1.9d0 - last loaded 35285424495
com.apple.driver.InternalModemSupport 2.4.0
com.apple.filesystems.autofs 2.0.2
com.apple.driver.AppleHDAPlatformDriver 1.6.8a3
com.apple.iokit.IOBluetoothSerialManager 2.1.6f8
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.driver.AppleMikeyHIDDriver 1.0.6
com.apple.driver.AppleHDA 1.6.8a3
com.apple.driver.AppleMikeyDriver 1.6.8a3
com.apple.driver.AGPM 100.6.5
com.apple.DontSteal_Mac_OSX 6.0.3
com.apple.driver.AppleHDAController 1.6.8a3
com.apple.iokit.CHUDUtils 200
com.apple.iokit.CHUDProf 207
com.apple.driver.AppleGraphicsControl 2.8.11
com.apple.driver.BroadcomUSBBluetoothHCIController 2.1.6f8
com.apple.driver.SMCMotionSensor 2.1.1d2
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.kext.AppleSMCLMU 1.4.3d2
com.apple.driver.AppleIRController 110
com.apple.GeForce 5.4.4
com.apple.driver.ACPISMCPlatformPlugin 3.4.0d10
com.apple.driver.NVSMU 1.1.7
com.apple.driver.AppleSMBusPCI 1.0.1d1
com.apple.driver.AppleLPC 1.2.12
com.apple.driver.AppleBacklight 1.6.0
com.apple.driver.AppleTyMCEDriver 1.0.0d28
com.apple.nvidia.nv50hal 5.4.4
com.apple.driver.AppleUSBTCButtons 1.7.4f1
com.apple.driver.AppleUSBMultitouch 189.32
com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1
com.apple.driver.AppleUSBTCKeyboard 1.7.4f1
com.apple.driver.AppleUSBHIDMouse 1.2.3f1
com.apple.driver.AppleUSBMergeNub 3.4.3
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.0.9
com.apple.iokit.SCSITaskUserClient 2.0.9
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOAHCISerialATAPI 1.1.1
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.driver.AirPortBrcm43xx 363.35.0
com.apple.iokit.IOAHCIBlockStorage 1.2.1
com.apple.driver.AppleUSBHub 3.4.0
com.apple.iokit.IOUSBUserClient 3.3.1
com.apple.driver.AppleUSBEHCI 3.4.3
com.apple.driver.AppleUSBOHCI 3.3.5
com.apple.nvenet 1.0.48
com.apple.driver.AppleAHCIPort 1.6.0
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleSmartBatteryManager 158.10.0
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIPCI 1.2.4
com.apple.driver.AppleACPIButtons 1.2.4
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.4
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.6.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.0.0
com.apple.driver.DiskImages 199
com.apple.BootCache 30.4
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.DspFuncLib 1.6.8a3
com.apple.driver.AppleSMBusController 1.0.1d1
com.apple.iokit.IOHDAFamily 1.6.8a3
com.apple.iokit.CHUDKernLib 196
com.apple.iokit.IOAudioFamily 1.6.9fc3
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.IOPlatformPluginFamily 3.4.0d10
com.apple.driver.AppleSMC 2.2.1d2
com.apple.NVDAResman 5.4.4
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.driver.AppleUSBBluetoothHCIController 2.1.6f8
com.apple.iokit.IOBluetoothFamily 2.1.6f8
com.apple.iokit.IOUSBHIDDriver 3.2.2
com.apple.driver.AppleHIDMouse 1.2.3f1
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.0.9
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.0.9
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IOUSBFamily 3.4.3
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.driver.AppleACPIPlatform 1.2.4
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.2.0I'm guessing something is corrupted assuming it's not a hardware problem. I would try this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
We have a set of oracle clients running on T5220 zones that need some help
Greetings all -
We have a set of oracle clients running on T5220 zones that need some help.
If, for example, I execute the query "select (all) from dba_objects", trace output reports 90% of the elapsed time spent under "SQLNet message from client".
Here are OS details for the clients: Solaris 10 5/08 s10s_u5wos_10 SPARC
Running "uname -a" from the client gives:
(SunOS bmc-ste-app 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220)
Here are OS details for the dataserver: Enterprise Linux Enterprise Linux Server release 5.2
Running "uname -a" from the dataserver gives:
(2.6.18-92.1.6.0.2.el5 #1 SMP Thu Jun 26 17:44:55 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
The RDBMS is 10.2.0.4
Again, please note, there is no application in the picture here. We are just running a simple catalog query (select * from dba_objects) from sqlplus. Why the wait on something like this? The wait also occurs when a different query is used (select (all) from SYS.COL$ where rownum < 50000). And it doesn't matter if I used the full client or the instant client. I still get the same high-wait.
We had thought - maybe this is a network thing - so we put a test client on the same subnet as the dataserver. This helped - but not enough. The wait is still way too high even with firewalls taken out of the equation.
We've also looked at arraysize, SDU, kernel settings. And we've spent time going over tkprof, truss and sqlnet-tracing.
Has anyone ever had to solve this HIGH WAIT ON CLIENT issue? Is there a work around or some tweak I'm missing.
Is anyone configured like we are (linux dataserver, solaris clients)? If so - did you see anything like this?
tia -
Jim
Edited by: jim1768 on Mar 31, 2010 1:47 PM
Edited by: jim1768 on Mar 31, 2010 2:12 PM
Edited by: jim1768 on Mar 31, 2010 2:13 PMHello,
We have the exact same issue. Did you ever solve this issue? We have a t5220 and have just upgraded our 11.5.10.2 11i system on it from 9.2.0.8 32-bit sparc to 11.2.0.1 64-bit sparc. Things should be faster but arent, and our consultant has tracked it down to high wait times when the apps tier using forms connects to the database tier on the same box. So even though the t5220 is both server and client, there is something about the client sql connection.through TNS that his having trouble. Thanks for any information. We've also created an S/R with Oracle.
Note: I am well aware of the other issues with the CMT server series but this particular issue seems independent of the regular / known issues and remains a mystery to us. Other known issues with the CMT servers for SPARC:
Metalink Note 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 & T2)
http://blogs.sun.com/glennf/resource/Optimizing_Oracle_CMT_v1.pdf
http://blogs.sun.com/glennf/tags/throughput
http://blogs.sun.com/glennf/entry/getting_past_go_with_sparc
http://www.oracle.com/apps_benchmark/doc/E-Bus-11i-PAY_ORA_SUN-T5220.pdf (this paper has some oracle init settings at the end. The kernel settings have been included in the OS upgrade)
http://blogs.sun.com/mandalika/entry/siebel_on_sun_cmt_hardware -
Need some help in LiveCycle Designer ES 8.2
Hi i need help with tables in livecyckle.
Example. I create one table with 32 rows and 8 numretic cells, and another table below with 1 row and 8 numretic cells.
In the big table i can input numbers and working fine.
now to my problem. Ex, i want to input number 12 in row 1 cell 3.and then again same number 12 in row 2 cell 3 and i want the result (24) in table 2 row 1 cell 3. is there anyboby who can help me with that See below
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
12
3
5
12
7
9
4
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
4
24
10
14
Best regards StigHi again Steve and thanx for the reply..send you a coupie of my file.
All text on it is in swedish so i can explain a little for you.
Text Veckodag is Weekday,Tim is hours. Frånv. is a shortname for sickness,
Dagtid is daytime Kväll is evening, Helg is weekends, Afton is Big weekend
like christmas day, s-helg is a shortname for big weekendsdays like day
after christmas day, Jour is jour. The field to the left with numbers is
date. Totalt is total
The only fields i need some help with is the field from Tim to Jour. And the
result should apear in the last fielt Totalt
Can also tell that im not so good in english but im learning. And the last
thing of all :Happy easter to you and thanxs again.
Stig in sweden My E-mail adress is [email protected] -
Need some help with: implement email notification on note board within a page layout (javascript)
Dear all,
I have a quite specific issue in which I'm in need of some guidance and help!
Within our SharePoint I have created a custom page layout. This is a simple page to post some content (news) and a standard Note Board is implemented.
Every time a news item is placed, this is done by our communication departement, this page with standard layout is placed as a page in a page library. When there are no comments on that particular item/subject I found a solution to replace the standard SharePoint_no_posts-text
by placing a contenteditor web part in the Page Layout with a reference to a textfile with some javascript in it. This works perfectely.
The only thing left is that I want to automatically send an email to the contact (which is defined when making the news item) everytime someone posts a new comment. Here is where I need some help!
We don't really use mysites so I was wondering if someone could tell how I could do this by for example some code (javascript) which I can implement in the Page Layout.
Can anyone help me?
Thanks in advance,
Gr MattTry below code:
function sendMail() {
var link = 'mailto:?subject=insert subject line&body=';
var curntLoc=window.location.href;
link +=escape(curntLoc);
window.location.href = link;
// window.location.href = link;
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9cfe7884-fc9e-4c7c-a44c-f740d2edcafc/sending-email-using-javascript-in-sharepoint-2010
Also check below:
http://spjsblog.com/2010/06/16/send-email-with-javascript-with-the-help-of-a-workflow-in-a-dedicated-send-email-list/ -
Need some help with threads...
Hello all,
I am working on a project at work, and I am not the best programmer in the world. I have been trying to get my head around this for a couple of days and just cannot get it to work.
I am writing an instrumentation control program that will have three threads. One is the GUI, one will receive control information and set up the hardware, and one will check the hardware status and report it to the GUI periodically. I plan on using the invokeLater() method to communicate the status to the GUI and change the status display in the GUI. Communication from the GUI to the controller thread and from the status thread to the controller thread I had planned on being piped input/output stream as appropriate. I have a control class and a status class that need to be communicated over these piped streams. In some trial code I have been unable to wrap the piped input/output streams with object input/output streams. I really need some help with this. Here is the main thread code:
package playingwiththreads1;
import java.io.*;*
*public class PlayingWithThreads1 {*
public static void main(String[] args) {*
* PipedOutputStream outputPipe = new PipedOutputStream();*
* ObjectOutputStream oos = null;*
* ReceiverThread rt = new ReceiverThread(outputPipe);*
// Start the thread -- First try*
* Thread t = new Thread(rt);*
t.start();*
// Wrap the output pipe with an ObjectOutputStream*
try*
oos = new ObjectOutputStream(outputPipe);*
catch (IOException e)*
System.out.println(e);*
// Start the thread -- Second try*
//Thread t = new Thread(rt);*
//t.start();*
/** Send an object over the pipe. In reality this object will be a
class that contains control or status information */
try
if (!oos.equals(null))
oos.writeObject(new String ("Test"));
catch (IOException e)
try
Thread.sleep(5000);
catch (InterruptedException e)
I read somewhere that it matters where you start the thread relative to where you wrap piped streams with the object streams. So, I tried the two places I felt were obvious to start the thread. These are noted in the comments. Here is the code for the thread.
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
private PipedInputStream inputPipe = new PipedInputStream();
private ObjectInputStream inputObject;
ReceiverThread (PipedOutputStream outputPipe)
System.out.println("Thread initialization - start");
try
inputPipe.connect(outputPipe);
inputObject = new ObjectInputStream(inputPipe);
catch (IOException e)
System.out.println(e);
System.out.println("Thread initialization - complete");
public void run()
System.out.println("Thread started");
try
if (inputObject.available() > 0)
System.out.println(inputObject.read());
catch (IOException e)
System.out.println(e);
Through testing I have determined that no matter where I start the thread, the thread never gets past the "inputObject = new ObjectInputStream(inputPipe);" assignment.
Could someone please help me with this? There are other ways for me to write this program, but this is the one that I would like to make work.
Many thanks in advance,
Rob Hix
Edited by: RobertHix on Oct 6, 2009 3:54 AMThanks for the help, but that did not work. I tried flushing the ObjectOutputStream and it is still hanging when initializing the thread.
Here is a better look at the code since I was helped to figure out how to insert it:
The main method:
package playingwiththreads1;
import java.io.*;
public class PlayingWithThreads1 {
public static void main(String[] args) {
PipedOutputStream outputPipe = new PipedOutputStream();
ObjectOutputStream oos = null;
ReceiverThread rt = new ReceiverThread(outputPipe);
// Start the thread -- First try
//Thread t = new Thread(rt);
//t.start();
// Wrap the output pipe with an ObjectOutputStream
try
oos = new ObjectOutputStream(outputPipe);
oos.flush();
catch (IOException e)
System.out.println(e);
// Start the thread -- Second try
Thread t = new Thread(rt);
t.start();
/* Send an object over the pipe. In reality this object will be a
* class that contains control or status information */
try
if (!oos.equals(null))
oos.writeObject(new String ("Test"));
oos.flush();
catch (IOException e)
System.out.pringln(e);
try
Thread.sleep(5000);
catch (InterruptedException e)
}The thread code:
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
private PipedInputStream inputPipe = new PipedInputStream();
private ObjectInputStream inputObject;
ReceiverThread (PipedOutputStream outputPipe)
System.out.println("Thread initialization - start");
try
inputPipe.connect(outputPipe);
inputObject = new ObjectInputStream(inputPipe);
catch (IOException e)
System.out.println(e);
System.out.println("Thread initialization - complete");
public void run()
System.out.println("Thread started");
try
if (inputObject.available() > 0)
System.out.println(inputObject.read());
catch (IOException e)
System.out.println(e);
}Does anyone else have and ideas?
Maybe you are looking for
-
Appointment - Transaction is rejected in CRM online
Hello, When creating an appointment in my CRM calendar i get an email from the admin account set for groupware connector with a link of the appointment. It does synchronise in my calendar successfully but i want to disable the email that i am getting
-
I have inadvertently deleted over 600 photos to trash. I would like to restore them either to the general photo list or move them to albums. The deleted photos and videos all are intact but I don't know how to transfer them to a folder where I can us
-
Best issue : using SDO_GEOMETRY in dotnet application
Hi, I would like to use oracle spatial in my application. I h'ven't any experience about using oracle spatial in dotnet application. What's the best way ? Using XMLcommand for making spatial request and deserialize result ? Making stored procedure re
-
In my iphone 5 power button is not working what i can do??? And there is 1 year warranty so i can replace it or not???
-
Change Number (due to harassment)?
Hello, It appears that my online number is the victim of a student prank. I used this number for quite some time with Skype without any problems, but it appears a former student (you can guess how well they did in the class) is now contacting a redi