Kernel Panics on startup and when starting in recovery mode
I have a brand new Mac mini late 2014 right out of the box (2.8ghz, 8gb ram, fusion drive)
Upon initial startup the computer froze with a spinning wheel of death during the setup process and then restarted with a kernel panic. The computer kernel panics every time I restart or if I try to go into recovery mode. I live in Ecuador and am about a 10 hr drive from where I bought the computer. Hoping someone might have some insight or can understand any of this panic report. Thanks in advance for any help.
Anonymous UUID: 1274EFCD-E218-10BE-D151-4A6D21C8611B
Tue Jan 27 13:27:18 2015
*** Panic Report ***
panic(cpu 0 caller 0xffffff800f21e80a): Kernel trap at 0xffffff7f91745895, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x00000000000021f0, CR3: 0x000000000584e00c, CR4: 0x00000000001626e0
RAX: 0x0000000000000000, RBX: 0xffffff802238c298, RCX: 0xffffff7f91757e00, RDX: 0xffffff802238c298
RSP: 0xffffff8117af3890, RBP: 0xffffff8117af38a0, RSI: 0x0000000000000002, RDI: 0xffffff8022141000
R8: 0xffffff8021867600, R9: 0xffffff8117af3be0, R10: 0x0000000000000008, R11: 0xffffff8117af3b90
R12: 0xffffff8117af3940, R13: 0xffffff7f91757ecc, R14: 0xffffff8117af39e0, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f91745895, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00000000000021f0, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8117af3540 : 0xffffff800f13a811
0xffffff8117af35c0 : 0xffffff800f21e80a
0xffffff8117af3780 : 0xffffff800f23a443
0xffffff8117af37a0 : 0xffffff7f91745895
0xffffff8117af38a0 : 0xffffff7f91757e14
0xffffff8117af38c0 : 0xffffff7f91757ef5
0xffffff8117af38e0 : 0xffffff800f6d566e
0xffffff8117af3920 : 0xffffff7f91757f60
0xffffff8117af3970 : 0xffffff7f91718d44
0xffffff8117af3990 : 0xffffff7f91718e81
0xffffff8117af3a10 : 0xffffff7f918c166d
0xffffff8117af3a70 : 0xffffff800f6d566e
0xffffff8117af3ab0 : 0xffffff7f918c19ac
0xffffff8117af3b00 : 0xffffff7f91718e81
0xffffff8117af3b80 : 0xffffff7f91718855
0xffffff8117af3bc0 : 0xffffff800f700003
0xffffff8117af3d00 : 0xffffff800f1ea517
0xffffff8117af3e10 : 0xffffff800f13e91c
0xffffff8117af3e40 : 0xffffff800f1235a3
0xffffff8117af3e90 : 0xffffff800f133e8d
0xffffff8117af3f10 : 0xffffff800f20a142
0xffffff8117af3fb0 : 0xffffff800f23ac66
Kernel Extensions in backtrace:
com.apple.AppleGraphicsDeviceControl(3.7.21)[4700601D-3FEB-3B86-B2BA-8D71AF84D1 C4]@0xffffff7f91718000->0xffffff7f9171bfff
com.apple.driver.AppleIntelFramebufferAzul(10.0)[78B8EBD4-B401-3BB9-BB23-E33F24 B52B69]@0xffffff7f9171c000->0xffffff7f91766fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f8f84e000
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f8fe20000
dependency: com.apple.iokit.IOAcceleratorFamily2(156.4)[20DDCE61-E3EC-3CC1-8B79-170CEF2B603 A]@0xffffff7f916ac000
dependency: com.apple.iokit.IOReportFamily(31)[781C9DD1-4CE9-3AEB-85EA-D420CEC18916]@0xffff ff7f8f8b0000
dependency: com.apple.AppleGraphicsDeviceControl(3.7.21)[4700601D-3FEB-3B86-B2BA-8D71AF84D1 C4]@0xffffff7f91718000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f91672000
com.apple.driver.AppleGraphicsDevicePolicy(3.7.7)[0F1BB75D-C1F8-37BD-A2AE-0CEDB 6083906]@0xffffff7f918bd000->0xffffff7f918c3fff
dependency: com.apple.driver.AppleGraphicsControl(3.7.21)[62689710-EEA7-307A-AC83-B8F25DA88 A6A]@0xffffff7f918ba000
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f8fe20000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f8f84e000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f91672000
dependency: com.apple.AppleGraphicsDeviceControl(3.7.21)[4700601D-3FEB-3B86-B2BA-8D71AF84D1 C4]@0xffffff7f91718000
BSD process name corresponding to current thread: displaypolicyd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x000000000ee00000
Kernel text base: 0xffffff800f000000
__HIB text base: 0xffffff800ef00000
System model name: Macmini7,1 (Mac-35C5E08120C7EEAF)
System uptime in nanoseconds: 47944526008
last loaded kext at 29608019997: com.apple.driver.AppleBluetoothHIDKeyboard 175.5 (addr 0xffffff7f8fcdc000, size 16384)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleHDAHardwareConfigDriver 266.5
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleGraphicsDevicePolicy 3.7.7
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.AGPM 100.14.37
com.apple.driver.X86PlatformShim 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelFramebufferAzul 10.0.0
com.apple.nke.webcontentfilter 5
com.apple.driver.AppleIRController 327.5
com.apple.driver.CoreStorageFsck 471
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.driver.DiskImages.SparseDiskImage 389.1
com.apple.driver.DiskImages.ReadWriteDiskImage 389.1
com.apple.driver.DiskImages.UDIFDiskImage 389.1
com.apple.driver.DiskImages.HTTPBackingStore 389.1
com.apple.driver.DiskImages.FileBackingStore 389.1
com.apple.driver.DiskImages.RAMBackingStore 389.1
com.apple.BootCache 35
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AirPort.Brcm4360 900.19.8
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.nke.applicationfirewall 161
com.apple.kext.MojoKDP 1.0.4
com.apple.driver.AppleBluetoothHIDKeyboard 175.5
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.driver.IOBluetoothHIDDriver 4.3.0f10
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.iokit.IOSurface 97
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.driver.AppleIntelLpssUART 2.0.45
com.apple.iokit.IOSerialFamily 11
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleThunderboltEDMSink 4.0.2
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471
com.apple.driver.DiskImages.KernelBacked 389.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 700.52
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.driver.AppleIntelLpssGspi 2.0.45
com.apple.driver.AppleIntelLpssDmac 2.0.45
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleIntelLpssI2C 2.0.45
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.Libm 1
com.apple.kec.corecrypto 1.0
Model: Macmini7,1, BootROM MM71.0220.B00, 2 processors, Intel Core i5, 2.8 GHz, 8 GB, SMC 2.24f32
Graphics: Intel Iris, Intel Iris, Built-In
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E424C54414C41522D4E5444
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E424C54414C41522D4E5444
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x13B), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE SSD SM0128F, 121.33 GB
Serial ATA Device: APPLE HDD HTS541010A9E662, 1 TB
USB Device: Microsoft Optical Mouse with Tilt Wheel
USB Device: IR Receiver
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: Mac mini, Apple Inc., 26.1
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.
Similar Messages
-
Kernel panic at startup and impossible to reinstall SL
Hi
I've recently bought the new iMac with SSD.
I've upgraded the Ram, adding 8go Crucial to the 4go existing.
The first time, I started very well, very quickly.
After that, I installed W7 on my bootcamp partition. It went very fine also.
After having installed W7, I booted on the Mac OS X partition. This was the first time I've got a kernel panic at startup.
Fine, I thought it was a mismanipulation when I installed W7. So, I wanted to reinstall SL.
I tried, 2 or 3 times, but I've always had this message while installing "The installer could not copy the necessary support files".
I managed to boot Mac OS in Safe Mode. I tried to installed SL directly from the Safe Mode, and I got another error : "Impossible to read the installation disk".
So I tried to make a UBS Stick bootable image of the SL installation disk : I cannot mount it "checksum error".
I hardly think now that the problem is coming from the RAM, but instead from the SL disk.
The installation disk is new, it was the first time I was using it.
Now, I am able again to boot from the mac os partition without having chaned anythink, but having booted once in safe mo
Guys, could you help my with that ? How can I get a new disk ? How can I be sure that the RAM is OK (W7 is working fine and SL also right now).
Thanks in advanceSorry misunderstanding, my bad. By new I meant never used before.
It is the brand new iMac 27" SSD. So it supports up to 16GB of RAM.
I am also sure of the model of RAM I ordered.
I wanted to remove the new intalled RAM, however, I can't : it's way to hard. When I pull the tab, I just slip.
I can boot to the Install DVD (So, SL 10.6.8). I can go up to the beginning of the installation. It evens begins to copy files, and I always get the error at the same moment.
The same thing happens when I try to install SL from the Safe Mode of my existing OS. It begins to copy file until I get "unable to read the disk, bla bla".
I hope it was only a minor disk corruption, but I would like to be sure. How can I test the RAM and the Installation Disk ?
I tried to make an image of the installation disk, but when I try to mount the compressed image, I get a checksum error...
thanks again for your help -
Firefox closes right after startup, even when starting in safe mode
I have tried all the steps in the "Firefox crashes" article but none of these helped.
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.com/kb/Firefox+crashes
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Kernel panics, spinning wheel and restart dialogs on startup
That's it! Time for a little help from you guys and gurus before I chuck my iMac out the window.
Configuration info:
iMac G5
PowerMac8,1
PowerPC G5 (3.0)
CPU's 1
1.8 GHz
L2-cache 512 K
Memory: 2 GB
600 MHz
Boot ROM-version: 5.2.2f4
System:
System: Mac OS X 10.4.5 (8H14)
Kernel-version: Darwin 8.5.0
Firewire:
LaCie 1394 DVD-R/RW+CD drive LUN 0
LaCie d2 Extreme LUN 0 HD 200GB
USB:
Canon i560 printer
Wacom Intuos 3
Background:
Coputer worked fine in Mac OSX 10.4.3
Problems:
After updating to 10.4.5... and reinstalling the system 5-6 times from scratch I have been getting kernel panics, spinning wheels and restart dialogs on startup intermittent.
The latest panic:
Panic (cpu 0 caller 0x002E0368) Unable to find driver for this platform PowerMac 8,1.
Kernel Version 8.5.0
There have been all sorts of kernel panics but I don't get a panic log since system seems to panic in such an early stage.
This has been done, more than once:
- Disconnected everything
- Reformatted HD and reinstalled from original CD
- Downloaded combo updates from Apple website and installed them after repairing disc and permissions first.
- Starts fine
- Repaired permissions again, after restart.
- installed one app at a time (latest updates on every app), allways restarting to see if everything still is fine, which it is.
- Reconnecting external drive, burner, printer etc. allways checking if everything is fine by doing a reboot. It is.
Computer seems happy, and so am I...
Next morning, a kernel panic, or a reboot dialog or spinning wheel at startup. I reboot, cross my fingers, and it starts up first, second or third try. No panic log other than the screen on startup.
- I reinstall combo update, restart and do a command-alt-P-R on the #&%?! and everything is fine... untill next day.
- I run Apple Diagnostic and there is a problem with one of the memory cards. I try it again and again looping. Now no problems found?! So I rum Memtest and still no problems found.
- I do this over and over againg to the point of physical illness.
- I reboot from my external drive with 10.4.3 without any problems whatsoever.
- Go back to 10.4.5 and the problems start again.
- I remove Apple caches, Extension caches, ATS and all that. Boots fine... untill next day?!
The most irritating thing is that once the computer boots up there are no apparent problems whatsoever using it.
I have read every post on kernel panics here, at apple website and at The X Lab. Tried - in my opinion - everything without getting to the bottom of it.
What did I forget?
What havent I tried?
I want my trusted Mac back!
Very thankful for any help whatsoever.
P.s. Since the computer works fine in 10.4.3 I don't see the point of taking it to service. It has to bee software related, no?
iMac G5 17/1.8/2GB/80/SD/56k Mac OS X (10.4.5) LaCie d2 Extreme 200GB Ext. HD. / Canon i560 print / LaCie 1394 DVD-R/RW+CD drivThank You for Your quick responce!
I have 2 1GB DIMMs installed from the shop when I bought my iMac. I read http://docs.info.apple.com/article.html?artnum=86814 about iMac Memory Specs and if I understand it correctly I could remove one of the DIMMs to test if the problem goes away. Although the computer will run better with two DIMMs it will work with one slot empty as well.
Did I understand that correctly?
iMac G5 17/1.8/2GB/80/SD/56k Mac OS X (10.4.5) LaCie d2 Extreme 200GB Ext. HD. / Canon i560 print / LaCie 1394 DVD-R/RW+CD driv -
My mac has a "Kernel Panic" screen come up on start up. No matter what I try I can't get past this to fix it. Any hints out there? Do I have to completely wipe my drive and re-install to fix this? I can't even back up my files before doing this as like I say I can't get past the Kernel Panic message.
There are some fairly informative articles about kernel panics...
•OS X: About kernel panics:
http://support.apple.com/kb/TS3742?viewlocale=en_US&locale=en_US
Note the toggle triangles to get more info in the above article, some are
important steps, with alternative methods of accessing or performing a
suggested activity and may vary with the OS X version in use.
•Resolving Kernel Panics:
http://www.thexlab.com/faqs/kernelpanics.html
•Technical Note: TN2063: Understanding and Debugging Kernel Panics:
https://developer.apple.com/library/mac/technotes/tn2063/_index.html
The above TN covers several technical aspects to identify & troubleshoot.
Some are above the average user needs, but still can be rather helpful.
Hopefully you can get past the kernel panic screen, there are several
ways to attempt to do that, however if the issue is hardware, a reinstall
of the OS X may not cure the underlying cause of the symptom.
Good luck & happy computing! -
My mac book startup disk is full and when I start it, it give me a blank blue screen. I have tried the shift upon start
and I started in safe mode, and it gave me the stars screen. How can I delete files to fix the problem1. Start up in Safe Mode.
http://support.apple.com/kb/PH11212
2. Empty Trash.
http://support.apple.com/kb/PH10677
3. Delete "Recovered Messages", if any.
Hold the option key down and click "Go" menu in the Finder menu bar.
Select "Library" from the dropdown.
Library > Mail > V2 > Mailboxes
Delete "Recovered Messages", if any.
Empty Trash. Restart.
4. Delete old iOS Devices Backup.
iTunes > Preferences > Devices
Highlight the old Backups , press “Delete Backup” and then “OK”.
http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
5. Re-index Macintosh HD
System Preferences > Spotlight > Privacy
http://support.apple.com/kb/ht2409 -
DVD drive broken, Mac G5 having kernel panics at startup
After nearly 5 years of steady, trouble free use, my G5 iMac started acting up a few days ago. I get what I think are kernel panics at startup. I am usually able to get it running after a few restarts but I am worried. My DVD drive became unreliable a month after my 1 year warranty expired. For some reason it won't start up with the install disks that came with the cpu but will bootup from my DiskWarrior DVD. I tried rebuilding the directory with DiskWarrior but I got the blue screen when it was almost finished. I've decided to do and Archive and install because I'm sure my problem stems from programs I installed recently. Is it possible to do the Archive and Install from my Intell Powerbook which is running the same version software. I've tried it several times, inserting the iMac install disk on my PB with my iMac connected in Target Disk mode, but I keep getting the message that the software can't be installed on this computer (the PB). Is there another way I can perform an A&I, I don't have enough space on my iDisk to use SuperDuper to create a disk image. I'm almost at the panic stage here since I use my computer for work and I'm afraid it won't start up at all at some point.
I've performed all the usual steps, repair permissions and used Disk Utility on my Firewire connect PB to repair the disk. One odd thing is FontExplorerX all of a sudden quit on me two days ago (which has never happened in the 4 years I've used it) and told me to download it again, which I did.
Message was edited by: e. jonesHi e. jones, and a warm welcome to the forums!
Other way around, with the iMac's Install Disc in the PB, boot the PB into T mode, boot the iMac with the Option key held down, wait for the Install Disk in the PB to show up as a boot option on the iMac.
But I think you have more serious problems. And, first you need to move some things off the iMac to make room for an A&I, you really need an external FW Drive right away. -
Recurring Kernel Panic on startup, pls advise
Can I get some advice on how to diagnose a persistent kernel panic on startup?
About this Mac
Version 10.4.11
Processor: 1.67GHz PowerPC G4
Memory: 1.5GB DDR SDRAM
(PowerBookG4)
panic(cpu 0 caller 0x002E1EC4): Unable to find driver for this platform: "PowerBook 5.7".
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0X00095A10 0X00026898 0X002E1EC4 0X002C12A0 0X002C1AD0 0X002C20DC 0X000A9714
Proceeding back via exception chain:
Exception state (sv=0x00BFF500)
PC=0x00000000; MSR=0X0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XCP=0x00000000; (unknown)
Kernel version
Darwin Kernel Version 8.11.0: Wed Oct 18 10:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
No debugger configured - dumping debug iformation
MSR = 00001030
Latest stack backtrace for cp 0:
Backtrace:
0x000954F8 0X00095BF8 0X002E1EC4 0X002C12A0 0X002C1068 0X002C1AD0 0X002C20DC 0X000A9714
Proceeding back via exception chain:
Exception state (sv=0x00BFF500)
PC=0x00000000; MSR=0X0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XCP=0x00000000; (unknown)
Kernal version:
Darwin kernel version 8.11.0: Wed Oct 10 15:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic: we are hanging here...
-The PowerBookG4 starts up when selecting the local hard disk via Startup Manager (press and hold Option key); PowerBookG4 starts up when inserting the install disk 1 and selecting the local hard disk via Startup Manager (press and hold C key); PowerBookG4 starts into safe mode (press and hold Option+Shift keys).
I have verified and repaired disk permissions and the disk itself. This behavior occurs consistently with or without external devices connected.
I can work in my applications ok and everything appears to function as expected once I get the PowerBookG4 booted, but I am concerned about how long it may continue to function - got a lot to do!
Advice? very appreciated thank you! -ben
Message was edited by: Bendervish
Message was edited by: BendervishUnderstanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html
Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. Since you've disconnected external devices, USB & Firewire don't appear to be a problem. Are you using an external mouse?
Have you added RAM recently? To eliminate RAM being the problem, Look at this link: *Testing RAM* @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
Look at 12-Step Program to Isolate Freezes and/or Kernel Panics
Cheers, Tom -
Can't get past kernel panics on startup
Like the title says, I'm unable to get past kernel panics on startup. I know next to nothing about the technical side of computers, so I'll just explain the whole process of what I've gone through. Earlier today I got a kernel panic after waking my computer from sleep. I restarted and everything was fine. I probably should have looked in to the cause of the panic, but I just went on using the computer as normal. Later, I returned to the computer, woke it from sleep, and got another kernel panic. I restarted, and my computer got to the Apple logo and gray spinning wheel when it froze. No kernel panic, just a frozen wheel. So I shut it down, restarted it again, and this time I got to just a gray screen (I don't remember if the Apple logo had shown up or not, but there was no spinning wheel). It hung on that screen for a while, then the fans started running like they were trying to take off a jet engine, so I shut it down. I tried restarting it once more, and it got to the spinning wheel screen when another kernel panic happened. I restarted the computer, and tried this a few more times, getting kernel panics each time. So I let it rest. A few minutes later I tried it again. This time it got even further, and I was pretty hopeful that I'd at least get the computer running again. It got past the gray spinning wheel, to the blue screen that usually shows up before the "cosmic wallpaper" and login screen. At that point it hung on that blue screen, and the jet engine sound started up. Now I take out my 10.5 instal disc. I back up with Time Machine, so I'm just going to hope reinstalling and restoring from Time Machine works out. I stick in my 10.5 disc, hold down the 'c' key and start up the iMac. Eventually it gets to the spinning wheel screen and a kernel panic. That's where I am now. Any help? I have a big paper due on Tuesday, so there's a ticking clock.
Thanks a lot
MikeHi - I have a similar problem here, running snow leopard 10.6. I am also not technical.
I went out & left my mac on, and when I got home it had switched itself off and on restart I got to the grey screen + Apple icon. Unfortunately I have never backed up my data!! Tried starting in safe mode (holding Shift key) and get the following message every time I try this:
panic (cpu 0 caller 0x560d25): "Unable to find driver for this platform: \"APCI\".n" e/SourceCache/xnu/xnu_1504.9.37/iokit/Kernel/IOPlatformExpert.cpp:1389
Debugger called:<panic>
Backtrace (CPU0),Frame : Return Address (4 potential args on stack)
BDS process name corresponding to current thread: Unknown
Mac OS version: Not yet set
Kernel Version: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root: xnu-1504.9.37~1/RELEASE_I386
I have tried booting from the Leopard disc but can't do a repair as it doesn't seem that it can find the Mac hard disc. Have also tried starting holding the <option> key and get a Hardisc icon displayed with an arrow beneath, and when clicked a progress bar appears for maybe 30 seconds, then disappears & it just carries on in grey screen mode with spinning wheet & Apple icon.
I want to know if I just have to concede that I have lost my data and need to reinstall the OS, or it could be worth taking to a Mac repair agent to try to retrieve it -
Early 2006 iMac Kernel Panics on startup
We have recently purchased a second hand 20" iMac, and after a few days it has started to kernel panic on startup, before the Apple logo disappears. A whirring when it begins to turn on has also appeared.
I shall photograph the kernel panic message if it helps. The local Apple Store have suggested that since there is a greater time period before the Apple Logo appears, the fault might be something to do with the motherboard/hard drive. Are there any suggestions here which may help us?
Thank you.KimGale wrote:
The kernel panic occurs before I can log in.
here's some to read up on:
_*Resolving Kernel Panics*_ and here _*http://support.apple.com/kb/HT2546*_.
for OS X 10.6 specifically, see this: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8965.html.
also
_*What is a kernel panic*_,
_*Technical Note TN2063: Understanding and Debugging Kernel Panics*_,
_*Mac OS X Kernel Panic FAQ*_,
and
_*Tutorial: Avoiding and eliminating Kernel panics*_
The disk is in there, and now we can't get it out
FWIW,
Kappy wrote:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
JGG -
Kernel panic occurred on startup last week. Since then have tried the following-
Removed all periferals apart from Apple keyboard and mouse.
Tried each of the 512Mb ram chips on their own.
Booted from and ran successfully-
DiskWarrior - clear
System Disc, Disc Utilities - clear
Tech Tool Pro - clear
Apple Hardware test - clear
Ran Memtest on ram, came out OK
Wrote zeros to hard disc then installed a new OSX 10.4.6. Still get kernel panic on startup.
Checked LED's on logic board while starting up from internal start button. 3 light up before kernel panic. Not sure if this test indicates good logic board, power supply or not?
Can boot OK in safe boot mode. Again should that indicate logic board and hard disc OK?
Help?If all three of the LEDs light up, that means that power is getting to the places it should, but even if the logic board is getting power, that doesn't mean that it is functioning properly. You have performed all the tests you can (thanks for listing them) and nothing shows up. Call Apple and make an appointment to take it in and have a genius look at it, or, if you have Apple Care, call them and see what they suggest.
-
10.6.8 kernel panic at startup (fixed)
**excuse my english since I'm french**
Like a lot of people, I've installed 10.6.8 through software update. And I've experimented kernel panic at startup. So, I unplugged everything (my two USB hubs with multiple peripherals) except the original Apple keyboard and Apple wired mouse. And restarted in safe mode. Downloaded Apple 10.6.8 combo update, install it and restart. Everything went fine. Great.
But as soon as I plugged back my USB hub, kaboom! here's come the Kernel Panic again.
So, one by one, I plug and unplug my peripherals. To discover that my old optical wired two button mouse (love that mouse ;-))) was THE problem. Even when it's plugged directly in one of the USB port on my Mac Pro. I've try with three different optical USB wired mouse, one Logitech, one Dell and one Verbatim (my old mouse): kaboom! Kernel Panic. With my Microsoft optical wireless mouse? No kernel panic. 10.6.8 crashes only with third partys wired mouses, except the Mac wired mouse.
Voilà.
So, I'm stuck with the old wired Apple Mouse (that I hate). But no more kernel panic.
Hope my story can help someone.
And Apple, I missed my optical two buttons wired mouse. ;-))I have the same problem, but only on one of the two iMacs that I updated to 10.6.8.
The first installation went smoothly, and I haven't had any trouble with the mouse or anything else on that iMac. A Samsung color laser printed continues to work just fine.
The second installation seemed to have a hiccup -- after I had authorized the update there was a second update screen. That sequence finished with a kernel panic, which continued through several attempts until I unplugged the Logitech laser mouse.
That Logitech mouse works perfectly on the first updated iMac, and the other Logitech mouse from that computer causes a kernel panic on the troublesome iMac.
I'm now using an Apple bluetooth mouse, which I'm getting used to - but I would still prefer the option of my good old Logitech mouse.
Another problem is that I can't print to a networked Konica-Minolta bizhub C451. Tried the combo 10.6.8 updater and reinstalled the Konica driver -- but still no dice. -
I'm getting a kernel panic on startup after restore hd
Long story made short...installed Google Music to use with my new phone...next day Mac running slow, left it running while I was out, came home to frozen screen...booted in safe mode and clicked off everything that was running in background. Tried to reboot and it kept shutting down when reaching grey screen. (I orginally had leopard and upgraded to snow leopard) got my OSX (leopard) install cd and booted to disc, disk utilities and check disc...originally would only let me verify, which failed, then unmounted and was able to get repair disc...unable to repair. I erased hd and then restored from my time machine backup, now when I boot I get kernel panic on startup. I'm running of external hd which I formatted and installed leopard essential software. So my question is, is my HD shot? Are there other step I can take? I can't afford to bring this in to someone. This is most of what my screen says when I boot:
Panic(cpu 1 caller 0x47f5ad): "Process 1 exec of /sbin/launchd failed, errno 8\n"@/SourceCache/xnu/xnu-1504 . 15 . 3/bsd/kern/kern_exec.c.3145
Debugger called: <painic>
Backtrace (cpu1), Frame : Return Address (4 potential args on stack)
and the a list of numbers....
any and all help would be appreciated to help me resolve thisBump, can anyone help?
-
Kernel panics on startup on a MB late 2008
Hi everyone.
After reading dozens of threads about kernel panics I couldn't find any appropriate post.
So you see, I've got a unibody MacBook late 2008 and as the thread name states I'm experiencing kernel panics on startup. The weird thing is, these panics occur totally random and I can't induce them. Usually I have an apple keyboard, apple mouse and a WD 1TB drive (TimeMachine backup) connected via USB plus an external monitor and magsafe power. Even after disconnecting all that stuff I receive kernel panics.
I haven't had any kernel panic during normal operation so far. As soon as I get the system up and running nothing happens. They just keep coming every second or third startup.
There are 9 crash reports in my L/Logs/Diag.Reports. You can see the last kernel panic report here:
Tue Jan 22 16:00:04 2013
panic(cpu 0 caller 0xffffff80102b7bd5): Kernel trap at 0xffffff7f9124f578, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80f1c3e000, CR3: 0x0000000012eae000, CR4: 0x0000000000000660
RAX: 0x00000000164aae3d, RBX: 0x01ffff8022416000, RCX: 0x0000000080a4a2ab, RDX: 0x0000000000000000
RSP: 0xffffff80f7443e50, RBP: 0xffffff80f7443e60, RSI: 0x0000000000000002, RDI: 0xffffff8010801ef0
R8: 0x0000000000000001, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8022416000, R13: 0xffffff8022038100, R14: 0xffffff80223d6100, R15: 0x0000000000000001
RFL: 0x0000000000010246, RIP: 0xffffff7f9124f578, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff80f1c3e000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f7443af0 : 0xffffff801021d626
0xffffff80f7443b60 : 0xffffff80102b7bd5
0xffffff80f7443d30 : 0xffffff80102ce4ed
0xffffff80f7443d50 : 0xffffff7f9124f578
0xffffff80f7443e60 : 0xffffff801063181b
0xffffff80f7443ea0 : 0xffffff801063133e
0xffffff80f7443f30 : 0xffffff801062d2d0
0xffffff80f7443f70 : 0xffffff8010631e99
0xffffff80f7443fb0 : 0xffffff80102b26b7
Kernel Extensions in backtrace:
com.apple.driver.AppleUSBOHCI(5.2.5)[1C94C4BC-B05C-36D4-B1A2-B0BE04A5C620]@0xff ffff7f9124e000->0xffffff7f91260fff
dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f910f8000
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f908af000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000010000000
Kernel text base: 0xffffff8010200000
System model name: MacBook5,1 (Mac-F42D89C8)
System uptime in nanoseconds: 1060195299
last loaded kext at 357954763: com.apple.driver.XsanFilter 404 (addr 0xffffff7f91ea4000, size 20480)
loaded kexts:
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0I'm not an expert at reading panic logs but nothing you posted jumps out at me. Since you still get the panics with everything disconnected I would try repairing your hard drive with Disk Utility and reinstalling Mountian Lion.
-
MacBook 2.1 Kernel Panic on startup
Hi, Guys! I have a macbook that sometimes goes in Kernel panic at startup
I need to power of the the mac pressing the power button for some seconds, after this it boot normally...
this is the log of kernel panic:
Interval Since Last Panic Report: 11836 sec
Panics Since Last Report: 4
Anonymous UUID: 4F66CF62-080B-44E4-906F-5CDFA05FB6CA
Thu Jan 31 13:37:42 2013
panic(cpu 1 caller 0x2aaeab): Double fault thread:0x4ca3000, trapno:0x8, err:
0x0, registers:
CR0: 0x8001003b, CR2: 0x04b08da8, CR3: 0x008d6000, CR4: 0x00000660
RAX: 0x00007fff8ab11190, RBX: 0x00007fff8ab11190, RCX: 0x00007fff8ab11191,
RDX: 0x0000001000000000
RSP: 0xffffff9004b08db8, RBP: 0x00007fff5fbfd940, RSI: 0x000000110002e3ed,
RDI: 0x000000110002e3ed
R8: 0x000000110002e3ed, R9: 0x00007fff5fbfdab8, R10: 0x00007fff5fc404a0,
R11: 0x00007fff8ab261e0
R12: 0x00007fff5fc43dc8, R13: 0x00007fff5fc43be8, R14: 0x00007fff5fbfdab8,
R15: 0x00007fff5fbfdab8
RFL: 0x0000000000010093, RIP: 0xffffff80002c0c20, CR2: 0xffffff9004b08da8
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x2fbaef78 : 0x21b837 (0x5dd7fc 0x2fbaefac 0x223ce1 0x0)
0x2fbaefc8 : 0x2aaeab (0x59de64 0x59e0df 0x4ca3000 0x8)
0x2fbaf0b8 : 0x2a29d2 (0x0 0xf 0x2e3ed 0x11)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0x5fbfd940
BSD process name corresponding to current thread: launchd
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3
~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CA9)
System uptime in nanoseconds: 13280777169
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.2d2 - last loaded 13191053663
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleLPC 1.5.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AirPort.Atheros 411.19.4
com.apple.driver.AirPort.Atheros21 425.14.7
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AppleBacklight 170.0.46
com.apple.driver.AppleIntelGMA950 6.3.6
com.apple.driver.AppleIntelIntegratedFramebuffer 6.3.6
com.apple.driver.CSRHIDTransitionDriver 2.4.5f3
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTrackpad 201.6
com.apple.driver.AppleUSBTCKeyEventDriver 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.USBCameraFirmwareLoader 1.1.0
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.2.4
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.iokit.AppleYukon2 3.2.1b1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f14
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.CSRUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2
GHz, 2 GB, SMC 1.13f3
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
Memory Module: global_name
AirPort: AirPort Extreme, Atheros 5416: 2.1.14.6
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HCC543225A7A380, 232,89 GB
Parallel ATA Device: MATSHITADVD-R UJ-857D
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021b,
0x1d200000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205,
0x7d100000 / 2So I just ran Apple Hardware Test and first two attempts get code:
4SNS/1/40000000: TB0T
Anybody? Logic Board?
And on a third attempt:
4VDC/1/40000003: VideoController
Maybe you are looking for
-
Apex 4.2.2 PDF Printing with Apex 2.0 Listener
We recently installed Apex 4.2 with the Apex 2.0 Listener and can successfully print interactive reports and classic reports to PDF. I viewed Mark Sewtz PDF Printing with Apex 4.2.2 and saw how he is using third party tools to format reports. We ha
-
10.4.6 installation problem (with finder)
First, sorry if someone else's post covered this, but I've been doing a couple of hours of searching and can't find anything so on with the problem... Well after installing 10.4.6 and restarting my iMac, very peculiarly finder doesn't start up and th
-
Every time I open Firefox, I get a pop-up asking me to install the Alexa Sparky toolbar--which I do not want. The pop-up box does not offer an option to say "no" or "do not ask me again", which is VERY annoying. How can I permanently stop the popup?
-
Flash player skips to a green screen when fast forwarding video OSX 10.8.2
Right so I have searched the forum and found a few threads about flash videos generally being a green screen, but nothing there helped my problem, nor did it seem similar. I have a 15" MacbookPro Retina running OSX Mountain Lion 10.8.2, my flash play
-
Audition 5.5 will not open. Get a message window says "Adobe Audition has stopped working." Tried uninstalling and re-installing. No fix. I previously had both version 3 and CS5.5 installed. Will not open from within Premiere or as stand-alone. Versi