Kernel Patch level in JAVA Engin

Hello All,
I have planned to upgrade the kernel for JAVA engine (Version 640) and checked for the patch level. It appears as release 640 and i am not able to find the patch of the kernel(tried in system info page and jalunch -v option). Later I came through a thread in this forum which stated there is no patch level for Java Kernel. Is this right? If this is right then how do we upgrade the kernel for Java engine
Kindly clarify
Regards,
Anand

Hi,
In Java, kernel are identified in SPS not in terms of patch level like in ABAP systems. so whatever will your SP stack level of your portal, the same will be the kernel level of your portal.
So if you want to upgrade your portal kernel alone, you cant. You have to upgrade your whole Portal SPS to take your portal on new kernel and SP stack level. Latest SPS Available in the market place is 24 as of today.
With Regards,
Saurabh

Similar Messages

How do I see the Kernel patch level in Java ONLY instance?

Could someone please tell me How do I see the Kernel patch level in a Java ONLY instance?
In Abap, it is simple!
In Java I see in the System Info: Kernel Version: 7.00 PatchLevel 108458.44
BUT that doesn't correspond to the real patch level which I can see when I do disp+work which gave me 111

Hello Yechezkel,
I am not sure whether the patch number you are looking for is available.
Typically you can use "-v" to display the patch level of SAP kernel programs. When I run "jcontrol -v" or "jlaunch -v", the patch number is blank (at least on the 6.40 release I checked)
The SP level should be able to tell how current the Java instance is updated, especially for NetWeaver 7 systems always patched with JSPM stack.
Best regards,
Victor

Kernel patch level

hello,
We have 3 system landscape DEV, QAS & PRD on HP-UX, oracle 9.2, ECC 5.0.
kerne patch level of DEV system is 196 and QAS system is 347 and PRD system's kernel patch level is 196
can this is affect on request transporting DEV to QAS and PRD or any issues plz. guide me
thanks

Hi,
No problems for tranports but you're not qualifying what will be running on production....
The whole point of a quality system is to use exactly the same release, kernel patch levels and SP levels as the prodcution system.
Regards,
Olivier

Solaris kernel patch levels

I have engineers asking for a particular kernel patch level to be installed on machines.
Is there anywhere that lists the kernel patch level on releases and hardware updates for Solaris 8-10?
Thanks,
Duane

Please start with Sunsolve (http://sunsolve.sun.com) and Sun documentation (http://docs.sun.com) web sites.

Kernel Patch Level for Linux RHEL 4

Hi every one,
Can any one pls tell me the latest Kernel patch level for OS Linux RHEL 4 .
or ls tell me whr can i find it .
Thanks,
Praveen

http://service.sap.com/patches
--> Entry by Application Group
--> Additional Components
--> SAP Kernel
          o SAP KERNEL 32-BIT
          o SAP KERNEL 32-BIT UNICODE
          o SAP KERNEL 64-BIT
          o SAP KERNEL 64-BIT UNICODE
Choose your platform here.
SAP KERNEL 4.6D 32-BIT
SAP KERNEL 4.6D_EXT 32-BIT
SAP KERNEL 6.40 32-BIT
SAP KERNEL 7.00 32-BIT
Choose your release
Download the independent and the database dependent part.
Markus

Kernel patch level upgrade

our kernel patch level is 221
now i want upgrade patch latest non unicode 64bit kernel for DB2 database
E:\usr\sap\QAS\SYS\exe\nuc\NTAMD64
E:\usr\sap\QAS\DVEBMGS00\exe
which one correct directory..

Dear Subhash.Chandra.
You writed the patch files have to be copied both directories.
I'm finding the official document or manual of it.
I updated igs patch on one server(ecc 6.0 ides).
I copied the file to one directory(/sapmnt/SID/exe). and I found igs patch was OK(transaction : sisg).
And the the other directory(/usr/sap/SID/DV~~/exe) has same file automatically without copy.
Second Case,
I updated igs patch on our ecc dev server.
I can't update igs version with copy to only one directory.
So I copied remained directory. Then I found igs patch updated successfully.
Thank you.

Incorrect kernel patch level

Dear Experts,
I just upgraded kernel patch level to the latest one, i.e. 254, however the EWA report still read the old patch level (Your SAP kernel release (release 700, patch level 254) is not up-to-date).
Do we have to upgrade the ST_PI and/or PI_BASIS, the status is as follow:
SOLMAN:
PI_BASIS    2006_1_700   0008   SAPKIPYM08
ST-PI           2008_1_700 0000
Satellite:
PI_BASIS    2005_1_700 0010   SAPKIPYJ7A
ST-PI           2008_1_700 0000
Please advise.
Thank and Regards,
Rudi

Hi,
This "outdated check" is based on the compiling date of the
'disp+work package' of the kernel. The rules for how many days mean
outdated depend on the kernel release and the ST-SER Release and SP
running on the Solution Manager.
Please find below some corrections that extent the rules for beeing
up-to-date:
1076235 - RED Rating in Software Configuration, Kernel 700 old
1301137 - ST-SER 2008_2 SP02: Further Corrections
1304151 - Service Assistent: Adjustments for Kernel Check
You may want to have the latest ST-SER version in order
to ensure that the latest corrections are implemented in your system.
Hope this helps.
Cheers
SH

Sap kernel patch level

Hi Gurus,
   How can i find the current patch level of kernel i am working on.   I work on 4.6c. OSAIX. DatabaseDB2.
Thanks in advance,
Sachin.

Hi Bhaskar,
Thanks for the response.
In
SM51--> Release Information
i could see
Support package number      2307
. So is this the kernel patch level?
Thanks in advance,
Sachin.

Can you run different kernel patch levels?

We have a PA-RISC central instance, and an Itaniuim dialog instance. They are have different versions of the 640 kernel.
Can we connect the dialog instance to the central instance?
Thanks,
D.

Hi D.,
I've got a different patch level with a HP-UX CI + Windows DI with 46D kernel and it worked fine, but now those Win DI are over...
Sorry, I haven't see this note, but as I said before you must maintain a similar patch level.
Now, reading this note, I can't suggest you to do it.
Regards,
JC Llanes.

How to determine 640/J2EE Startup Framework Binary Patch Level?

Hi All,
We are running BI ABAP with Java Add-in on WAS 640/SUSE/Oracle.
In the ABAP world, there are many options for determining the current kernel patch level. Disp+work -v, SYSTEM->STATUS, etc..
How do I determine the patch level of the J2EE startup framework (ie: jlaunch, jcontrol, etc..)? If I run these commands with '-version', I get a patch level of 0. From System Information, the Cluster Kernel Version is 6.40 PatchLevel 105424.313.
What I am trying to determine is if I have the binaries that map to the latest applied SP (18). Do I need to download J2EERTOS18.SAR and apply the bits or has that already been done? Or is the current patch level for the bits fro the J2EERTOS14.SAR file? Etc...
Any tips/suggestions?
Thanks much,
Greg

Hi
You can check the patch number like this;
D:\usr\sap\FT0\SYS\exe\uc\NTI386>jlaunch -version
Failed to reserve 1610612736 (0x60000000) bytes before loading DLLs (error 8).
jlaunch information
kernel release                700
kernel make variant           700_REL
compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode              UNICODE
compile time                  Jan 23 2008 20:42:28
update level                  0
patch number                  128                         <<< Here is the patch number>>
source id                     0.144
While regarding which file(s) to apply, please notice that the files you are not talking like
J2EERTOS16_1, is part of the J2EE support package stack, which can be applied with JSPM.
Regarding the kernel, you can alway refer to note 19466, and downlaod the lastest kernel from:
http://service.sap.com/swdc
   Support Packages and Patches ->
   Entry by Application Group "
   SAP NetWeaver and complementary products"
   SAP NETWEAVER" SAP NETWEAVER 7.0"
   Entry by Component"
   Application Server Java
   ===> SAP KERNEL 7.00 64-BIT UNICODE
Regards,
Thunder

How to check patch level in SAP 6.0 ?

how to check patch level in SAP 6.0 ?
is there any T code available for this
thnx in advance

Hello,
In note [1076022|http://service.sap.com/sap/support/notes/1076022] we can see:
b) Minimum support package levels and SAP kernel patch levels
   For non-SAP BW systems the minimum 700 SAP_BASIS support package level is SP14.
   For SAP BW systems, the minimum 700 SAP_BASIS support package level is SP16 and the minimum 700 SAP_BW support package level is SP18.
   Please consult note 1152240 for the minimum DbSl kernel patch level and the minimum JDBC driver requirements.
Regards,
Eduardo

Kernel Patch Install Procedure.

Dear All,
we are getting the error for "STORAGE_PARAMETERS_WRONG_SET"
while executing the program.
But SAP give the solution for this issuse(Latest Kernel Patch Install)
I have dowlnload the below kernel patch level in service market place.
SAPEXE_175-20000182.SAR Kernel Part I (for Basis 640/620/610) Q2/2008
SAPEXEDB_175-20000185.SAR Kernel Part II (for Basis 640/620/610) Q2/200
And the I have install (Over write)the our IDES above download the kernel patch level but not chnage the kernel patch value(System status check). But working well.
Any other procedure your advise Kindly help me.
Thank you.
Best Regards,
M.Thiru

Dear All,
we are getting the error for "STORAGE_PARAMETERS_WRONG_SET"
while executing the program.
But SAP give the solution for this issuse(Latest Kernel Patch Install)
I have dowlnload the below kernel patch level in service market place.
SAPEXE_175-20000182.SAR Kernel Part I (for Basis 640/620/610) Q2/2008
SAPEXEDB_175-20000185.SAR Kernel Part II (for Basis 640/620/610) Q2/200
And the I have install (Over write)the our IDES above download the kernel patch level but not chnage the kernel patch value(System status check). But working well.
Any other procedure your advise Kindly help me.
Thank you.
Best Regards,
M.Thiru

Solaris 9 kernel patch

Hello everyone,
I'm new to Solaris, so excuse me if my questions seems stupid.
I have e solaris 9 SunOS sirius 5.9 Generic_118558-11 sun4u sparc SUNW,Sun-Fire-V890and I want to increase the kernel patch level to the last one.
Could you give me some hints where I can find and download the latest patch and the steps to install it.
Thanks for your time.

[http://sunsolve.sun.com/search/document.do?assetkey=1-21-122300-31-1]
Instructions are in the readme file for the patch.

Kernel Patch Upgrade

Hi all,
We have our production system which is on ECC 6.0 with Oracle 10.2.0.2.The CI is on HP-Ux and there are 3 Application servers on Linux. All are on kernel patch level 95 and we need to update the kernel patch level to 124 in all the CI+apps
I just wanna know if the scenario below is correct
1)stopsap on all the apps
2)stopsap on the CI
3)Do the kernel upgrade on CI
4)Start sap on CI,chec if its fine
5)Then update kernel in individual apps and start sap on the apps server.
I guess its right..But just wanted to know if this is the best possible thing or something else is better than the above scenario.
Regards
Bharathwaj V

Hi Bharathwaj V,
your scenario sounds good.
Just some remarks:
- after stopping the app server / CI, also stop saposcol before changing the kernel
- make sure to run the same patchlevel on all appservers and CI (you seem to know about this already)
- run "saproot.sh <SID>" as root after changing the kernel before restarting the CI and appservers. saproot.sh is contained in the exe-directory, it will set the exe-settings of saposcol and br*
- because of the special settings of saposcol and br*, you'll have to change the kernel files as root
- keep a backup of the old kernel (copy exe to exe_PL95) until you are sure everything works fine.
Best regards,
Elmar.

Patch levels in 4.6c version

Hi all,
What is the patch level supported by 4.6c Version ?
Thanks,
Narasimha.

Hi,
I hope the below link will help you.
Recommended latest kernel patch level for R/3 4.6C on UNIX at HP-UX 64
Thanks,
Khushboo.

Kernel Patch level in JAVA Engin

Similar Messages

Maybe you are looking for