Kernel power errors and Lite-On firmware
Hi there Bought a brand new HP 840 G2 laptop and had it setup with Win 7 64bit.Ran fine for about a week until I installed the Lite-On Solid State Drive (SSD) Firmware Update 2C03 Rev.A(10 Jul 2015) from the HP website and started getting random restarts with Kernel_power 41 critical errors in the event log. Now i cannot even find the drivers on the HP 840 G2 page but only on google cache: http://webcache.googleusercontent.com/search?q=cache:-qeIiblz-TsJ:h20564.www2.hp.com/hpsc/swd/public/detail%3FswItemId%3Dob_150292_1%26swEnvOid%3D4158+&cd=5&hl=en&ct=clnk&gl=za How do firmware drivers get listed on one day and removed on the next? Is there a way to revert to the version of the firmware that came with the laptop? It was certainly not 2C03.Are my kernel_power issures really related to the firmware upgrade or is this just coincidence? Please help. Thank you.
you didnt seem to have configured the datasource / connection pool / database control with proper db properties
you should check your configuration to see if you have done it right and then you should check your application and the properties settings in the controls to ensure they are right.
Similar Messages
-
Kernel Power error after Win 7 and RAM upgrade
Hello,
I posted earlier on the subject of win7 and ram upgrades. I did both and it seemed to go fine. I did the ram first ... replaced a 667Mhz 1gb with a 800Mhz 2gb. A couple of days later the computer just shut itself down and restarted. Since then it has done it another 5 times, seemingly at random. Yesterday I decided to spend some time looking into it and found the 'event log'. All the shutdowns are recorded as 'critical'. A search on the web/here showed other occurences of the fault associated with drivers as much as anything.
After I did the win update I did update almost every driver with ones from this site.
Other than the shutdowns the only issues I have which are of very mild concern are the length of time the fingerprint reader takes to be present and that occasionally the cursor is unavailable for about a minute after logging on. When you try and control it it jumps about anywhere but where you want it to go. I rolled back the alps driver and that seems to have sorted the cursor issue.
So, details of the shutdown from the event log are as follows.
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 16/01/2011 16:21:31
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: (removed by me)
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
There's more (I've shown it all below) but it's not that important. When I looked into it I found details of the problem on the microsoft knowledge base. Its described here http://support.microsoft.com/kb/2028504.
I believe I fit into scenario 3 for cause and resolution.
So, it seems that win7 and mixed speed ram may be a problem on some computers ... probably only a tiny number, but it looks like the HP3507 is one of them. I did see somewhere that I could down speed from 667 to 266 which might help with memory compatability but I can't see anywhere on the the insydeH20 bios where to do it. BIOS is version F18 .... upgraded from F15 as part of the Win7/RAM ugrade.
Before I swap back to the 'old' memory I'll see if anybody here can come up with any ideas. It may be that I have to sell off the expensive 2gb memory (ddr2 800mhz 200 pin) for £39.99 from maplin at a bargain price and get 2gb of 667Mhz from somewhere.
The full 'detail' regarding the fault is below.
Bye for now.
Phil
Log Name: SystemSource: Microsoft-Windows-Kernel-Power
Date: 16/01/2011 16:21:31
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: (removed by me)
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2011-01-16T16:21:31.187617000Z" />
<EventRecordID>194889</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Home_Laptop</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>Hi DWeiland and Schwede,
Thanks for your replies. Yes I did the runtime engine registry change and also mass compiled the LV7.1 folder and my sourcecode. I still see the problem as I have set the LV adapter as Lv 7.1.1 runtime engine. Now I have changed it to LV7.1 development system. With this setting, it is not giving any error. Thus I don’t see any problem now. The older version of the code had the adapter as the runtime engine for some reason, now I have changed the setting to the development system. I hope that it shouldn’t be a problem.
Thanks again!
Thank you,
Sasi -
¿Why my Windows 7 Pro have Kernel-Power error 41?
Hello, good morning, I installed Windows 7 Professional Edition and each time freezes and restarts, I open the event viewer and I see several critical events would like to see if someone can help me. They say "Event 41, Kernel-Power", I occasionally
happen ... especially when browsing internet through a USB modem ZTE MF-193, but I have also occurred trying to play games like Half Life 1 or Warcraft 3.
My pc specs are as follows. According to the Direct X diagnostics are:
Time of this report: 4/5/2014, 07:24:38
Machine name: FAMILY-PC
Operating System: Windows 7 Professional 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: Spanish (Regional Setting: Spanish)
System Manufacturer: Intel
System Model: DG41WV
BIOS: BIOS Date: 01/07/09 15:28:41 Ver: 08.00.10
Processor: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz (2 CPUs), ~3.0GHz
Memory: 2048MB RAM
Available OS Memory: 1980MB RAM
Page File: 1317MB used, 2643MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
System events in XML view say:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-04-05T11:11:43.116009800Z" />
<EventRecordID>16184</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Familia-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">278</Data>
<Data Name="BugcheckParameter1">0xfffffa8001e65010</Data>
<Data Name="BugcheckParameter2">0xfffff88007225cb0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0xc</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>
another says:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-03-27T10:45:49.941213100Z" />
<EventRecordID>9491</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Familia-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">59</Data>
<Data Name="BugcheckParameter1">0xc0000005</Data>
<Data Name="BugcheckParameter2">0xfffff96000686d15</Data>
<Data Name="BugcheckParameter3">0xfffff88002a200d0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>
And the latest says:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-04-03T15:16:12.334410200Z" />
<EventRecordID>14621</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Familia-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>
I sincerely appreciate your support, I really like windows 7 but Windows XP I never thought such failures in the last hour I had 2 of them in the last 24 hours I've had 4 and in the last 7 days I've had 25.
It is a very distressing situation.YM
These were called BCC116 and are related to a video timeout/failure
"It's not a true crash, in the sense that the Blue Screen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".
Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OS's like XP to crash.
As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.
If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.
The first step is to install the newest video driver.
If playing with video driver versions hasn't helped, make sure the box is not overheating.
Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.
Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.
If so, it might be as simple as dust buildup and subsequently inadequate cooling.
I would download cpu-z and gpu-z (both free) and keep an eye on the video temps
For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557263%28v=vs.85%29.aspx
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\040514-15771-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a53000 PsLoadedModuleList = 0xfffff800`02c90e50
Debug session time: Sat Apr 5 07:08:35.611 2014 (UTC - 4:00)
System Uptime: 0 days 0:25:10.484
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 116, {fffffa8001e65010, fffff88007225cb0, 0, c}
Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys ( igdkmd64+23cb0 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa8001e65010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff88007225cb0, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 0000000000000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 000000000000000c, Optional internal context dependent data.
Debugging Details:
FAULTING_IP:
igdkmd64+23cb0
fffff880`07225cb0 4889542410 mov qword ptr [rsp+10h],rdx
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
CUSTOMER_CRASH_COUNT: 1
BUGCHECK_STR: 0x116
PROCESS_NAME: firefox.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
fffff880`061000f8 fffff880`06d3ccbc : 00000000`00000116 fffffa80`01e65010 fffff880`07225cb0 00000000`00000000 : nt!KeBugCheckEx
fffff880`06100100 fffff880`06d3c938 : fffff880`07225cb0 fffffa80`01e65010 fffffa80`034ebd50 fffffa80`03253010 : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`06100140 fffff880`06c0ff07 : fffffa80`01e65010 00000000`00017a38 fffffa80`034ebd50 fffffa80`03253010 : dxgkrnl!TdrIsRecoveryRequired+0x114
fffff880`06100170 fffff880`06c3dd7e : fffffa80`ffffffff 00000000`000179b8 fffff880`061002c0 00000000`00000000 : dxgmms1!VidSchiReportHwHang+0x40b
fffff880`06100250 fffff880`06c23bb1 : fffffa80`034ee000 ffffffff`feced300 00000000`00000000 00000000`00000001 : dxgmms1!VidSchWaitForCompletionEvent+0x196
fffff880`06100290 fffff880`06c3091c : 00000000`0000fea9 00000000`00000000 fffff880`06100798 fffffa80`01ef5010 : dxgmms1!VIDMM_GLOBAL::xWaitForAllEngines+0x1e9
fffff880`06100390 fffff800`02f2fd38 : ffffffff`ffffffff ffffffff`ffffffff 00000000`00000000 00000000`00000000 : dxgmms1!VIDMM_MEMORY_SEGMENT::RotateCopyCallback+0xe0
fffff880`06100400 fffff880`06c3594c : 00000000`0f5c0000 fffff880`061006d8 00000000`00000000 fffff8a0`00000002 : nt!MmRotatePhysicalView+0x6e8
fffff880`06100640 fffff880`06c2feb8 : fffffa80`034eec60 00000000`00100000 00000000`00000000 00000000`00000000 : dxgmms1!VIDMM_PROCESS_HEAP::Rotate+0x148
fffff880`061006d0 fffff880`06c21904 : fffffa80`034fdec0 fffff8a0`03643b00 00000000`00000001 fffff880`06100800 : dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+0x6f8
fffff880`06100840 fffff880`06c217e3 : fffffa80`034ee000 fffff880`06c2170a 00000000`00000000 fffffa80`02b253c0 : dxgmms1!VIDMM_GLOBAL::EvictAllAllocationInList+0x40
fffff880`06100880 fffff880`06c1e70d : 00000000`0000005a 00000000`00000000 00000000`00000000 fffffa80`00000000 : dxgmms1!VIDMM_GLOBAL::EvictAllReclaimedAllocation+0x43
fffff880`061008d0 fffff880`06c3865d : 00000000`00000000 fffff8a0`02dd8510 fffffa80`00000000 fffffa80`02b253c0 : dxgmms1!VIDMM_GLOBAL::PrepareDmaBuffer+0xc79
fffff880`06100aa0 fffff880`06c38398 : fffff800`0401c080 fffff880`06c37d00 fffffa80`00000000 fffffa80`00000000 : dxgmms1!VidSchiSubmitRenderCommand+0x241
fffff880`06100c90 fffff880`06c37e96 : 00000000`00000000 fffffa80`019de500 00000000`00000080 fffffa80`03253010 : dxgmms1!VidSchiSubmitQueueCommand+0x50
fffff880`06100cc0 fffff800`02d68166 : 00000000`01b39914 fffffa80`03252620 fffffa80`017e8840 fffffa80`03252620 : dxgmms1!VidSchiWorkerThread+0xd6
fffff880`06100d00 fffff800`02aa3486 : fffff800`02c3de80 fffffa80`03252620 fffff800`02c4bc40 fffff880`01246a90 : nt!PspSystemThreadStartup+0x5a
fffff880`06100d40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
igdkmd64+23cb0
fffff880`07225cb0 4889542410 mov qword ptr [rsp+10h],rdx
SYMBOL_NAME: igdkmd64+23cb0
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: igdkmd64
IMAGE_NAME: igdkmd64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4a01d55b
FAILURE_BUCKET_ID: X64_0x116_IMAGE_igdkmd64.sys
BUCKET_ID: X64_0x116_IMAGE_igdkmd64.sys
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x116_image_igdkmd64.sys
FAILURE_ID_HASH: {88759713-193a-fb8a-dab9-6846ea1a48f2}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag -
Kernel-Power Error Event 41 Task catergory 63
- System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0
Keywords 0x8000000000000002
- TimeCreated
[ SystemTime] 2014-03-06T22:00:25.156250000Z
EventRecordID 76624
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 8
Channel System
Computer TEST-TENCENT
- Security
[ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0 what's that above saying?Xen HVM windows vm.It is just saying the previous shutdown was unexpected. If you BSOD we need the DMP file if not event viewer logs to diagnose it.
We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
We prefer at least 2 DMP files to spot trends and confirm the cause.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem. The
work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag -
How to get rid of the weblogic.kernel.Default errors and warning?
Hi there,
When i'm running my application deployed on WLS8.1 SP3 and the application is running fine, but the following error and warnings were thrown.
2004-08-05 11:26:30,453 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] ERROR com.bea.wlw.runtime.core.util.Config - Failed to obtain connection to datasource=cgDataSource, using generic DB properties
<Aug 5, 2004 11:26:30 AM SGT> <Error> <WLW> <000000> <Failed to obtain connection to datasource=cgDataSource, using generic DB properties>
2004-08-05 11:27:12,281 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.default.elementattributes
2004-08-05 11:27:12,282 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.default.elementattributes', using defaults.
2004-08-05 11:27:12,308 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.system.groupIdCache.elementattributes
2004-08-05 11:27:12,308 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.system.groupIdCache.elementattributes', using defaults.
2004-08-05 11:27:12,386 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.region.CodeTableCache.elementattributes
2004-08-05 11:27:12,386 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.region.CodeTableCache.elementattributes', using defaults.
2004-08-05 11:27:13,527 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN com.bea.wlw.netui.script.el.NetUIReadVariableResolver - Could not create a ContextFactory for type "com.bea.netuix.servlets.script.PortalVariableResolver$PortalContextFactory" because the ContextFactory implementation class could not be found.
May i know why this is so? How to get rid of these error and warnings?
Thanks
Derek
Message was edited by derekchan at Aug 4, 2004 8:41 PM
Message was edited by derekchan at Aug 4, 2004 8:42 PMyou didnt seem to have configured the datasource / connection pool / database control with proper db properties
you should check your configuration to see if you have done it right and then you should check your application and the properties settings in the controls to ensure they are right. -
major,F0408,117295,sys/chassis-1/fault-F0408,power-problem,2012-08-08T13:45:12,Power state on chassis 1 is redundancy-failed
what does this mean? Both the power cables are connected, and they have status "Operable" in Chassis Power GUI.
Other than that, no faults.
Is it possible to set the time without using NTP? Do I have to set time from NX-OS command-line?Hi Atle,
I have seen that kind of issues here and there is something you can try in order to correct this problem:
A workaround to clear the I2C faults is to reseat fan trays, PSUs, and IOMs. Here is how to do it:
1. Reseat the fans from fan 1 to fan 8.
2. Reseat the PSUs from PSU 1 to PSU 4.
Pull the components out one at a time from 1 to the last, leave it out for at least 3 minutes before reinsert it back, observe the light to make sure all return to green before pulling the next one.
3. If the above does not work, pull out the IOM that is
flashing amber. Leave it out for 5 minutes and reinsert. Make sure
everything comes up and the lights turn green.
4. Monitor the system while reseating components by issuing
# show tech-support chassis 1 iom 1 brief
5. May have to reseat the second IOM if amber lights shifted.
6. If reseating the IOM does not solve the problem, we may
need to reacknowledge the chassis. This is disruptive to network
connections of the blades. You need a set a downtime to do it.
7. Repeat these steps on all chassis that are having amber lights.
I strongly recommend you upgrade the firmware to 1.4(3q) and above when
you are able to set a downtime. The errors will need to be clear before
the upgrade. Otherwise the message may remain until you reseat the
components.
This is just a cosmetic issue on the UCS environment.
Hope this helps!
David -
New MacBook Pro i7 2.66 - Kernel Panic Errors
Greetings! I have a new MBP, less than 3 weeks old now. I have received numerous kernel panic errors and am not sure how to decipher the log. I have run disk utility from the install disk and no problems came back. Not sure what to do.
The *first two crashes* happened while I was browsing in safari (only add = Web Developer, installed, but not enabled during the crash)...and the pages were quite simple, no heavy graphics--usually simple news blogs. It happens while I am connected via ethernet AND via airport. During the first two crashes I had a couple of firewire hard drives plugged in.
The *latest crash* happened while I was in Photoshop--again not doing anything to heavy. ANd no external drives were plugged in. Nothing but the power supply wired to the machine.
Can anyone help to explain what may be the problem. I am not sure if I should bring it in to the shop yet, or if there is something I can change from here to remedy the problem. Also, not sure if I should zap PRAM...I have yet to try this.
Thanks in advance for any insight into this problem.
g
crash1
Interval Since Last Panic Report: 197258 sec
Panics Since Last Report: 1
Anonymous UUID: 3EC9953A-242A-4C32-8797-0B78E46C08CC
Tue Sep 21 14:05:29 2010
panic(cpu 2 caller 0x2a8ab2): Kernel trap at 0x00000000, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x5063b000, CR4: 0x00000660
EAX: 0x0a383980, EBX: 0x00000000, ECX: 0x0000000c, EDX: 0x0c4b8780
CR2: 0x00000000, EBP: 0x93713c68, ESI: 0x0c4b8780, EDI: 0x461e4000
EFL: 0x00010246, EIP: 0x00000000, CS: 0x00000008, DS: 0x00ac0010
Error code: 0x00000010
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x93713a48 : 0x21b455 (0x5cf328 0x93713a7c 0x2238b1 0x0)
0x93713a98 : 0x2a8ab2 (0x591664 0x0 0xe 0x59182e)
0x93713b78 : 0x29e9a8 (0x93713b90 0x157f4200 0x93713c68 0x0)
0x93713b88 : 0x0 (0xe 0x1030048 0x1030010 0x10)
0x93713c68 : 0x1243afd (0x461e4000 0xc4b8780 0x0 0x0)
0x93713c98 : 0x124d715 (0x461e4000 0x988cadc 0xc4b8780 0x122deb6)
0x93713cd8 : 0x124d85b (0x988c800 0x461e4000 0x988cb20 0x8)
0x93713d08 : 0x122746a (0x988c800 0x461e4000 0x93713d38 0x213e04)
0x93713d38 : 0x53352d (0x461e4000 0x9cdc7d0 0x9cdc7d0 0x1)
0x93713d88 : 0x56440a (0x461e4000 0x9cdc7d0 0x9cdc7d0 0x1)
0x93713de8 : 0x2850e5 (0x461e4000 0x9cdc7d0 0x1 0x0)
0x93713e58 : 0x21d7f7 (0xf26e368 0x8c5c684 0xf26e36c 0xf26e3a4)
0x93713e98 : 0x210983 (0xf26e300 0x93713edc 0x923047c 0x93713ed0)
0x93713ef8 : 0x216be6 (0xf26e300 0x0 0x0 0x0)
0x93713f78 : 0x293eb4 (0x158d2c68 0x0 0x0 0x0)
0x93713fc8 : 0x29f48d (0x158d2c64 0x1 0x10 0x8b0ade4)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AppleIntelHDGraphics(6.1.8)@0x1223000->0x12cffff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x951000
dependency: com.apple.iokit.IONDRVSupport(2.1)@0x984000
dependency: com.apple.iokit.IOGraphicsFamily(2.1)@0x962000
BSD process name corresponding to current thread: Safari
Mac OS version:
10F569
Kernel version:
Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010; root:xnu-1504.7.4~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 141730942947202
unloaded kexts:
com.apple.driver.InternalModemSupport 2.6.2 (addr 0x7f220000, size 0x16384) - last unloaded 126255484646091
loaded kexts:
at.obdev.nke.LittleSnitch 2.2.05
com.apple.driver.IOBluetoothBNEPDriver 2.3.7f1 - last loaded 126129557539633
com.apple.filesystems.afpfs 9.7
com.apple.nke.asp_tcp 5.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.12
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.8.7f1
com.apple.driver.AppleMikeyDriver 1.8.7f1
com.apple.driver.AudioAUUC 1.4
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.ACPISMCPlatformPlugin 4.1.2b1
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.GeForce 6.1.8
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleGraphicsControl 2.8.63
com.apple.driver.AppleIntelHDGraphics 6.1.8
com.apple.driver.AppleIntelHDGraphicsFB 6.1.8
com.apple.driver.AppleUSBTCButtons 1.8.1b1
com.apple.driver.AppleUSBCardReader 2.5.4
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.driver.Oxford_Semi 2.5.4
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.2
com.apple.driver.AppleUSBHub 4.0.0
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 425.16.2
com.apple.iokit.AppleBCM5701Ethernet 2.3.8b2
com.apple.driver.AppleAHCIPort 2.1.2
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.0.2
com.apple.driver.AppleUSBUHCI 4.0.2
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.10.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.10.0
com.apple.driver.DspFuncLib 1.8.7f1
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.7f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.8.7f1
com.apple.iokit.IOHDAFamily 1.8.7f1
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.1.2b1
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.1.8
com.apple.NVDAResman 6.1.8
com.apple.iokit.IONDRVSupport 2.1
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.7f1
com.apple.driver.AppleUSBBluetoothHCIController 2.3.7f1
com.apple.iokit.IOBluetoothFamily 2.3.7f1
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.1
com.apple.driver.AppleUSBMultitouch 205.32
com.apple.iokit.IOUSBHIDDriver 4.0.2
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.0.1
com.apple.iokit.IOFireWireSBP2 4.0.6
com.apple.driver.AppleUSBMergeNub 4.0.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.4
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.0.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 311.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBFamily 4.0.2
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6.1
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.16.1)
Bluetooth: Version 2.3.7f1, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
FireWire Device: Rugged FW/USB, LaCie, Up to 400 Mb/sec
FireWire Device: Rugged FW/USB, LaCie, Up to 800 Mb/sec
crash2
Interval Since Last Panic Report: 102430 sec
Panics Since Last Report: 1
Anonymous UUID: 3EC9953A-242A-4C32-8797-0B78E46C08CC
Thu Sep 23 08:53:33 2010
panic(cpu 0 caller 0x2a8ab2): Kernel trap at 0x00041000, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00041000, CR3: 0x00100000, CR4: 0x000006e8
EAX: 0x0c949700, EBX: 0x00000000, ECX: 0x0000000c, EDX: 0x0c949400
CR2: 0x00041000, EBP: 0x54f83c08, ESI: 0x0c949400, EDI: 0x461e5000
EFL: 0x00010246, EIP: 0x00041000, CS: 0x00000008, DS: 0x00ac0010
Error code: 0x00000010
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x54f839e8 : 0x21b455 (0x5cf328 0x54f83a1c 0x2238b1 0x0)
0x54f83a38 : 0x2a8ab2 (0x591664 0x41000 0xe 0x59182e)
0x54f83b18 : 0x29e9a8 (0x54f83b30 0xd2a3c00 0x54f83c08 0x41000)
0x54f83b28 : 0x41000 (0xe 0x1030048 0x1030010 0x10)
0x54f83c08 : 0x1243afd (0x461e5000 0xc949400 0x0 0x0)
0x54f83c38 : 0x124d715 (0x461e5000 0xd3a4edc 0xc949400 0x122deb6)
0x54f83c78 : 0x124d85b (0xd3a4c00 0x461e5000 0xd3a4f20 0x8)
0x54f83ca8 : 0x122746a (0xd3a4c00 0x461e5000 0x8211d000 0x0)
0x54f83cd8 : 0x53352d (0x461e5000 0xa447bb8 0xa447bb8 0x1)
0x54f83d28 : 0x56440a (0x461e5000 0xa447bb8 0xa447bb8 0x1)
0x54f83d88 : 0x2850e5 (0x461e5000 0xa447bb8 0x1 0x0)
0x54f83df8 : 0x21d7f7 (0xd4db968 0xb93c384 0xd4db970 0xd4db9a4)
0x54f83e38 : 0x210983 (0xd4db900 0x54f83e7c 0x8caf7b0 0x54f83e70)
0x54f83e98 : 0x216be6 (0xd4db900 0x0 0x0 0x0)
0x54f83f18 : 0x293b71 (0x54f83f44 0x0 0x0 0x0)
0x54f83fc8 : 0x29f018 (0x12fcfd40 0x0 0x10 0xc0a3480)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AppleIntelHDGraphics(6.1.8)@0x1223000->0x12cffff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x951000
dependency: com.apple.iokit.IONDRVSupport(2.1)@0x984000
dependency: com.apple.iokit.IOGraphicsFamily(2.1)@0x962000
BSD process name corresponding to current thread: WebKitPluginHost
Mac OS version:
10F569
Kernel version:
Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010; root:xnu-1504.7.4~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 138134877885428
unloaded kexts:
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 2.5.4 (addr 0x54fd7000, size 0x8192) - last unloaded 48389582407223
loaded kexts:
at.obdev.nke.LittleSnitch 2.2.05
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.12
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.8.7f1
com.apple.driver.AppleMikeyDriver 1.8.7f1
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.driver.AudioAUUC 1.4
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.AppleIntelHDGraphics 6.1.8
com.apple.driver.AppleIntelHDGraphicsFB 6.1.8
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.ACPISMCPlatformPlugin 4.1.2b1
com.apple.GeForce 6.1.8
com.apple.driver.AppleGraphicsControl 2.8.63
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleUSBTCButtons 1.8.1b1
com.apple.driver.AppleUSBCardReader 2.5.4
com.apple.driver.AppleIRController 303.8
com.apple.driver.Oxford_Semi 2.5.4
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.2
com.apple.driver.AppleUSBHub 4.0.0
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 425.16.2
com.apple.iokit.AppleBCM5701Ethernet 2.3.8b2
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.0.2
com.apple.driver.AppleUSBUHCI 4.0.2
com.apple.driver.AppleAHCIPort 2.1.2
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.10.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.10.0
com.apple.iokit.IOSCSIReducedBlockCommandsDevice 2.6.5 - last loaded 48328369471161
com.apple.driver.DspFuncLib 1.8.7f1
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.7f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.8.7f1
com.apple.iokit.IOHDAFamily 1.8.7f1
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.1.2b1
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.1.8
com.apple.NVDAResman 6.1.8
com.apple.iokit.IONDRVSupport 2.1
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.7f1
com.apple.driver.AppleUSBBluetoothHCIController 2.3.7f1
com.apple.iokit.IOBluetoothFamily 2.3.7f1
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.0.1
com.apple.iokit.IOFireWireSBP2 4.0.6
com.apple.driver.AppleUSBMultitouch 205.32
com.apple.iokit.IOUSBHIDDriver 4.0.2
com.apple.driver.AppleUSBMergeNub 4.0.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.4
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.0.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 311.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBFamily 4.0.2
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6.1
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.16.1)
Bluetooth: Version 2.3.7f1, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
crash3
Interval Since Last Panic Report: 237615 sec
Panics Since Last Report: 2
Anonymous UUID: 3EC9953A-242A-4C32-8797-0B78E46C08CC
Sun Sep 26 14:28:44 2010
panic(cpu 2 caller 0x2a8ab2): Kernel trap at 0x00000000, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x0edcbd00, EBX: 0x00000000, ECX: 0x0000000c, EDX: 0x0edcbc80
CR2: 0x00000000, EBP: 0x5bfabc08, ESI: 0x0edcbc80, EDI: 0x46201000
EFL: 0x00010246, EIP: 0x00000000, CS: 0x00000008, DS: 0x00ac0010
Error code: 0x00000010
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x5bfab9e8 : 0x21b455 (0x5cf328 0x5bfaba1c 0x2238b1 0x0)
0x5bfaba38 : 0x2a8ab2 (0x591664 0x0 0xe 0x59182e)
0x5bfabb18 : 0x29e9a8 (0x5bfabb30 0x90db220 0x5bfabc08 0x0)
0x5bfabb28 : 0x0 (0xe 0x1030048 0x1030010 0x10)
0x5bfabc08 : 0x1243afd (0x46201000 0xedcbc80 0x0 0x0)
0x5bfabc38 : 0x124d715 (0x46201000 0xd216adc 0xedcbc80 0x122deb6)
0x5bfabc78 : 0x124d85b (0xd216800 0x46201000 0xd216b20 0x8)
0x5bfabca8 : 0x122746a (0xd216800 0x46201000 0x7e24a000 0x0)
0x5bfabcd8 : 0x53352d (0x46201000 0xa5da000 0xa5da000 0x1)
0x5bfabd28 : 0x56440a (0x46201000 0xa5da000 0xa5da000 0x1)
0x5bfabd88 : 0x2850e5 (0x46201000 0xa5da000 0x1 0x0)
0x5bfabdf8 : 0x21d7f7 (0xdd3e368 0xbe09f84 0xdd3e370 0xdd3e3a4)
0x5bfabe38 : 0x210983 (0xdd3e300 0x5bfabe7c 0xa5f1ebc 0x5bfabe70)
0x5bfabe98 : 0x216be6 (0xdd3e300 0x0 0x0 0x0)
0x5bfabf18 : 0x293b71 (0x5bfabf44 0x0 0x0 0x0)
0x5bfabfc8 : 0x29f018 (0xa96e040 0x0 0x10 0xa96e040)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AppleIntelHDGraphics(6.1.8)@0x1223000->0x12cffff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x951000
dependency: com.apple.iokit.IONDRVSupport(2.1)@0x984000
dependency: com.apple.iokit.IOGraphicsFamily(2.1)@0x962000
BSD process name corresponding to current thread: WebKitPluginHost
Mac OS version:
10F569
Kernel version:
Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010; root:xnu-1504.7.4~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 152076254980966
unloaded kexts:
com.apple.iokit.IOFireWireSBP2 4.0.6 (addr 0xab85d000, size 0x69632) - last unloaded 149553212569277
loaded kexts:
at.obdev.nke.LittleSnitch 2.2.05
com.apple.filesystems.afpfs 9.7 - last loaded 103430803979985
com.apple.nke.asp_tcp 5.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.12
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.8.7f1
com.apple.driver.AppleMikeyDriver 1.8.7f1
com.apple.driver.AudioAUUC 1.4
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.ACPISMCPlatformPlugin 4.1.2b1
com.apple.GeForce 6.1.8
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleGraphicsControl 2.8.63
com.apple.driver.AppleIntelHDGraphics 6.1.8
com.apple.driver.AppleIntelHDGraphicsFB 6.1.8
com.apple.driver.AppleUSBTCButtons 1.8.1b1
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBCardReader 2.5.4
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.2
com.apple.driver.AppleUSBHub 4.0.0
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.8b2
com.apple.driver.AirPortBrcm43224 425.16.2
com.apple.driver.AppleAHCIPort 2.1.2
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.0.2
com.apple.driver.AppleUSBUHCI 4.0.2
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.10.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.10.0
com.apple.driver.DspFuncLib 1.8.7f1
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.7f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.8.7f1
com.apple.iokit.IOHDAFamily 1.8.7f1
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.1.2b1
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.1.8
com.apple.NVDAResman 6.1.8
com.apple.iokit.IONDRVSupport 2.1
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.7f1
com.apple.driver.AppleUSBBluetoothHCIController 2.3.7f1
com.apple.iokit.IOBluetoothFamily 2.3.7f1
com.apple.driver.AppleUSBMultitouch 205.32
com.apple.iokit.IOUSBHIDDriver 4.0.2
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.1
com.apple.driver.AppleUSBMergeNub 4.0.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.4
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.0.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 311.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBFamily 4.0.2
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6.1
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
*and my general hardware info:*
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i7
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f16
Serial Number (system): W8033081GD6
Hardware UUID: 9AFBCDCF-665C-5B23-97BA-EB2E452C7E1E
Sudden Motion Sensor:
State: Enabledokay, i spoke too soon. just had another kernel panic. below is the log. bringing it into the shop tomorrow. oy!
Interval Since Last Panic Report: 396468 sec
Panics Since Last Report: 4
Anonymous UUID: 3EC9953A-242A-4C32-8797-0B78E46C08CC
Wed Sep 29 15:14:07 2010
panic(cpu 0 caller 0x2a8ab2): Kernel trap at 0x00000000, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x000006e8
EAX: 0x09a02580, EBX: 0x00000000, ECX: 0x0000000c, EDX: 0x0a7ad680
CR2: 0x00000000, EBP: 0x4e5abc08, ESI: 0x0a7ad680, EDI: 0x4616c000
EFL: 0x00010246, EIP: 0x00000000, CS: 0x00000008, DS: 0x00ac0010
Error code: 0x00000010
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x4e5ab9e8 : 0x21b455 (0x5cf328 0x4e5aba1c 0x2238b1 0x0)
0x4e5aba38 : 0x2a8ab2 (0x591664 0x0 0xe 0x59182e)
0x4e5abb18 : 0x29e9a8 (0x4e5abb30 0x99a57c0 0x4e5abc08 0x0)
0x4e5abb28 : 0x0 (0xe 0x1030048 0x1030010 0x10)
0x4e5abc08 : 0x1243afd (0x4616c000 0xa7ad680 0x0 0x0)
0x4e5abc38 : 0x124d715 (0x4616c000 0xac0badc 0xa7ad680 0x122deb6)
0x4e5abc78 : 0x124d85b (0xac0b800 0x4616c000 0xac0bb20 0x8)
0x4e5abca8 : 0x122746a (0xac0b800 0x4616c000 0xc38c9000 0x0)
0x4e5abcd8 : 0x53352d (0x4616c000 0x92f5000 0x92f5000 0x1)
0x4e5abd28 : 0x56440a (0x4616c000 0x92f5000 0x92f5000 0x1)
0x4e5abd88 : 0x2850e5 (0x4616c000 0x92f5000 0x1 0x0)
0x4e5abdf8 : 0x21d7f7 (0xb209268 0xb04de84 0xb209270 0xb2092a4)
0x4e5abe38 : 0x210983 (0xb209200 0x4e5abe7c 0x931e70c 0x4e5abe70)
0x4e5abe98 : 0x216be6 (0xb209200 0x0 0x0 0x0)
0x4e5abf18 : 0x293b71 (0x4e5abf44 0x0 0x0 0x0)
0x4e5abfc8 : 0x29f018 (0x9d4b480 0x0 0x10 0x9d4b480)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AppleIntelHDGraphics(6.1.8)@0x1223000->0x12cffff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x951000
dependency: com.apple.iokit.IONDRVSupport(2.1)@0x984000
dependency: com.apple.iokit.IOGraphicsFamily(2.1)@0x962000
BSD process name corresponding to current thread: WebKitPluginHost
Mac OS version:
10F569
Kernel version:
Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010; root:xnu-1504.7.4~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 41311572524712
unloaded kexts:
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.1b1 (addr 0x5bf1b000, size 0x8192) - last unloaded 26431538607741
loaded kexts:
at.obdev.nke.LittleSnitch 2.2.05
com.apple.filesystems.afpfs 9.7 - last loaded 33235056229477
com.apple.nke.asp_tcp 5.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.12
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AudioAUUC 1.4
com.apple.driver.AppleHDA 1.8.7f1
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.driver.AppleMikeyDriver 1.8.7f1
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelHDGraphics 6.1.8
com.apple.driver.AppleIntelHDGraphicsFB 6.1.8
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.driver.ACPISMCPlatformPlugin 4.1.2b1
com.apple.GeForce 6.1.8
com.apple.driver.AppleGraphicsControl 2.8.63
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleUSBTCButtons 1.8.1b1
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.driver.AppleUSBCardReader 2.5.4
com.apple.driver.AppleIRController 303.8
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.2
com.apple.driver.AppleUSBHub 4.0.0
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 425.16.2
com.apple.iokit.AppleBCM5701Ethernet 2.3.8b2
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.0.2
com.apple.driver.AppleUSBUHCI 4.0.2
com.apple.driver.AppleAHCIPort 2.1.2
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.10.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.10.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.DspFuncLib 1.8.7f1
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.7f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleHDAController 1.8.7f1
com.apple.iokit.IOHDAFamily 1.8.7f1
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.1.2b1
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.1.8
com.apple.NVDAResman 6.1.8
com.apple.iokit.IONDRVSupport 2.1
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.7f1
com.apple.driver.AppleUSBBluetoothHCIController 2.3.7f1
com.apple.iokit.IOBluetoothFamily 2.3.7f1
com.apple.driver.AppleUSBMultitouch 205.32
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.1
com.apple.iokit.IOUSBHIDDriver 4.0.2
com.apple.driver.AppleUSBMergeNub 4.0.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.4
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.0.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 311.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBFamily 4.0.2
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6.1
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0 -
can someone look at http://members.aol.com/trekboy07/vmware.jpg I am getting kernel compile errors and i am doing everything in the FAQ. what i do is i untar the file from the arch 4.0 cd into /usr/src/linux-2.4.20 and run make menuconfig take file from /usr/abs/base/kernel make some changes and replace it, and run "makepkg" i have done this in VMWare and on a Thinkpad 600 and get the same errors.
thanks for the helpIt seems like you bumped into a little bug in the linux kernel (at least, that's what google says, see the top link at http://groups.google.com/groups?q=undef … htool_gset )
I already sent a patch for this for 2.5 but I didn't know the problem
also exists in 2.4. The following patch fixes it:
--- linux-2.4.20-test/drivers/net/Makefile.old 2002-11-29 17:46:47.000000000 +0100
+++ linux-2.4.20-test/drivers/net/Makefile 2002-11-29 17:47:22.000000000 +0100
@@ -122,6 +122,7 @@
obj-$(CONFIG_MAC8390) += daynaport.o 8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
+obj-$(CONFIG_PCMCIA_SMC91C92) += mii.o
obj-$(CONFIG_SHAPER) += shaper.o
obj-$(CONFIG_SK_G16) += sk_g16.o
obj-$(CONFIG_HP100) += hp100.o
Zwane changed this driver to use the MII support library but he
accidentially forgot that this requires mii.o.
cu
Adrian -
Hello, Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive. ruffly about 10 or so. The Reboots happen randomly and do not create a dump file. We have contacted Lenovo and they are
not sure why its happening. Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up. I am also looking at using Procmon to dump to a file as well.
If anyone has any other ideas please let me know.
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
+ System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0
Keywords 0x8000000000000002
- TimeCreated
[ SystemTime] 2012-02-01T00:02:48.677610900Z
EventRecordID 8270
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 8
Channel System
Computer LR8K6TLC.cntr.thrivent.corp
- Security
[ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 129725280988099400
Event 89, Kernel-Power
ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.
_PSV = 0K
_TC1 = 0
_TC2 = 0
_TSP = 0ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 371K
_HOT = 0K
_PSL - see event data.
---- Details
+
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2012-02-01T00:02:49.270411900Z
EventRecordID
8271
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
68
Channel
System
Computer
LR8K6TLC.cntr.thrivent.corp
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\THM0
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
371
_HOT
0
_PSL
0000000000000000
Thank you.We have tested and checked both the Bios and firmware of the SSD Drive's
Bios was up to date and no issue
Firmware was also up to date as well.
Users are still experiencing random Reboots. I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
restart" off under Startup and Recovery) No dmp files as of yet. Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue. If anyone has any idea's to be able to capture what maybe happening that would
be great.
Thank you. -
Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite LC2400 [switching transformer].
The Mac Pro will not power on when connected to the Tripp Lite LC2400. The Power Supply makes continuous clicking noises and repeatedly resets the Mac Pro every 3 seconds.
The same Mac Pro connected to an outlet with no Tripp Lite starts up with no problem.Hi,
I've the same notebook. I've not had any hardlocks so far, but I've not seen so much flash movies yet. Anyway, I just tried closing running youtube-video tab on Kde4 + enabled desktop effects -> Everything's fine.
Anyway, perhaps we can collect some issues and solutions in this thread. Here are problems, that I encounter:
- restart does not work
- errors during boot:
[ 2.399277] pnp 00:0b: [irq 23]
[ 2.399308] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.932179] pnp 00:0c: can't evaluate _CRS: 12311
[ 14.616662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.616771] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 14.616792] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
[ 14.616904] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 9.262898] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[ 9.262920] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 9.262966] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[ 9.263176] sdhci-pci 0000:0b:00.1: setting latency timer to 64
Issued solved:
- in order to make nvidia graphics working you have to disable Optimius in BIOS.
- Battery not recognized -- fixed after recend updates
- grub2 does not work. As soon as grub2 loads, the laptop reboots. -> stick to grub1 -- works now (either I did sth wrong the first time or a new version of grub2 fixes this issue)
- in order to make the touchpad work properly install psmouse-elantech from AUR
update: this is only a half-solution. vertical scrolling on the right edge works but graphical tools which rely on x11-input-synpatics still don't work. However, everything works fine with kernel 3.3. Once this in the main arch repos you won't need psmouse-elantech anymore.
Last edited by knue (2012-03-06 23:26:26) -
Error 41 - Kernel Power in event log after clean shutdown - Windows 8.0
HP Envy H9-1405A - 16MB RAM, Windows 8.0, and up to date with updates. (16 months old but under extended h/w warranty). All user data backed-up daily.
After problems earlier today I noticed that after a controlled shutdown and start from cool (ie on/off button on PC, not mains power at the wall) the startup took over 10 minutes. Event browser showed error 41 - Kernel Power - "after system crash or lost power unexpectedly", which it definitely hadn't as I was testing a controlled shutdown.
When starting from overnight sleep mode this morning it came up with blue screen and an error mssage something like 'hard disk driver error', or similar (before first coffee so I wasn't really awake). PC wouldn't restart in anything like reasonable time until powered off at wall, after which it struggled up and ran normally for a while. Went out for a couple of hours and on return again the PC wouldn't re-start from sleep mode. Again used the wall power switch to effect the restart and PC and after very slow restart it ran normally. Event log showed Startup Repair ran due to a corrupted registry hive, and reboot used an earlier version.
Checkdisk ran clean and the HP Support Assistant diags just looped for ever.
I then tried a system restart, which worked but took a long time, and then a controlled power down and start from cool which also took a long time as described above. I've temporarily turned off sleep mode so as to keep working.
Question - do I have a transient software problem which might be fixable with Recovery, or failing hardware that should be covered by warranty, and where might I find some hardware diagnostics to show to the supplier? Thanks.Hello @mikerb,
I have read your post on how your desktop computer is displaying an error message in regards to a Kernel event log, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first". This should help to resolve the critical error message.
Just to be on the safe side, I also suggest following this resource on Testing for Hardware Failures (Windows 8); which should help determine if there is a hardware defect with one or multiple hardware components on your computer.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Kernel Power - Event ID 41 - Task Category 63 (spontaneous improper shutdowns and reboots)
I have been having consistent power offs/reboots lately, and im at my wits end about how to fix them.
It always seems to happen when im playing a high end game (Guild Wars 2, Mirrors Edge, etc.).
I havent experienced it while just browsing or doing basic work, or while playing lower intensity games that hog less resources.
The computer screen goes black, it reboots and i get the "windows has had an improper shutdown" kind of message.
Usually after playing the game for an hour at the least, though its happened 2-3 hours into the game as well.
I checked temps, and they are all normal,
Ive also attempted updating drivers, and downgrading from any beta drivers i was using, and none of that seemed to affect it.
I checked event viewer,
And right before this shutdown i get the critical error "Kernel-Power" "Event ID 41" Task Category 63"
this is the XML given to me in the details:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider
Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated
SystemTime="2012-09-02T04:55:51.116009800Z" />
<EventRecordID>28689</EventRecordID>
<Correlation
/>
<Execution
ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Owner-PC</Computer>
<Security
UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>
If anyone has any suggestions as to what could be going wrong, or things to check it would be greatly appreciated.
Ive looked around at others solutions and tried whats helped others and it hasnt done much so far.
it seems like this is a very broad problem, with no unspecific fix in most cases.Hi,
This scenario usually indicates a problem with the hardware. Or, the driver can cause this problem. To help isolate the problem, check the following items:
1. Overclocking: Disable overclocking to see whether the issue occurs when the system is run at the correct speed.
2. Check the memory: Verify the memory by using a memory checker. Verify that each memory chip is
the same speed and that it is configured correctly in the system.
3. Power supply: Make sure that the power supply has enough wattage to appropriately handle the
installed devices. If you added memory, installed a newer processor, installed additional drives, or added external devices, such devices can require more energy than the current power supply can provide consistently.
4. Overheating: Check whether the system is overheating by examining the internal temperature of
the hardware.
5. Defaults: Use system defaults, and run the system.
If you see that the computer generates a Stop error that contains a BugcheckCode value that is not reported in an event ID 41, change the restart behavior for the computer. To do this, follow these steps:
1. Right-click My Computer, and then click Properties.
2. Click Advanced system settings.
3. Click the Advanced tab.
4. In the Startup and Recovery section, click Settings.
5. Click to clear the Automatically restart check box.
For more information, please refer to this.
http://support.microsoft.com/kb/2028504#method3
Kim Zhou
TechNet Community Support -
Please help with Windows 7 x64 System error: Critical Kernel-power Event 41
I'm recieving this error while moving my laptop or working with it? Can someone help me to read memory dumps and to understand what causes this error please?
Where i can fount theese dump files? Can someone read them and is it possible to understand what is happening?
I have made full check of my memory and there are No errors I've also checked HDD with regenerator there are no errors too. but this not means that they can not be the problem. There is doubt about one of my HDD because when laptop is blocking there is bad
noise from HDD.
PS: There is another issue which is strange two of times when this happens the whole MBR was destroyed and the system refuses to boot ... only reboots. And i made bootrec /fixboot /fixmbr and this solve the problem ... I don't know is this connected with
system error, but i'm trying to give more details.
Thanks a lot.
Here are i'm posting my error details:
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
41
Version
2
Level
1
Task
63
Opcode
0
Keywords
0x8000000000000002
TimeCreated
[ SystemTime]
2011-06-25T20:38:38.328017300Z
EventRecordID
7571
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
8
Channel
System
Computer
Rumen-PC
Security
[ UserID]
S-1-5-18
EventData
BugcheckCode
0
BugcheckParameter1
0x0
BugcheckParameter2
0x0
BugcheckParameter3
0x0
BugcheckParameter4
0x0
SleepInProgress
true
PowerButtonTimestamp
129535076822776383Before every critical Errors in event log i found information about Kernel Power I'm pasting it here:
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2011-06-27T16:07:21.023625500Z
EventRecordID
9262
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
44
Channel
System
Computer
Rumen-PC
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\TZS1
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
361
_HOT
0
_PSL
0000000000000000
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2011-06-27T16:07:21.039225600Z
EventRecordID
9263
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
44
Channel
System
Computer
Rumen-PC
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\TZS0
AffinityCount
1
_PSV
359
_TC1
0
_TC2
50
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
361
_HOT
0
_PSL
0000000000000000
These two informations are before every critical error. -
Hi everyone!
Last day when I sat by my computer, it got totally hanged up. So I turned it off. When I started it again it took me like 20 min to get it started, then I got a error message.
I searched for it and tried different solutions, but I cant figure out if anything has been changed.
Can anyone tell me what the problem is based on the error parameters below?
This is the error log:
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
41
Version
3
Level
1
Task
63
Opcode
0
Keywords
0x8000000000000002
TimeCreated
[ SystemTime]
2014-12-06T09:33:17.930950800Z
EventRecordID
17769
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
8
Channel
System
Computer
Robb
Security
[ UserID]
S-1-5-18
EventData
BugcheckCode
159
BugcheckParameter1
0x3
BugcheckParameter2
0xffffe001e37f1720
BugcheckParameter3
0xffffd0005537f960
BugcheckParameter4
0xffffe001e5c362c0
SleepInProgress
5
PowerButtonTimestamp
0
BootAppStatus
3221225473Hi,
According to the Event ID:41:
Here is a expanition about this Event ID：
The kernel power event ID 41 error occurs when the computer is shut down, or it restarts unexpectedly. When a computer that is running Windows starts, a check is performed to determine whether the computer was shut down cleanly. If the computer was not shut
down cleanly, a Kernel Power Event 41 message is generated.
An event 41 is used to report that something unexpected happened that prevented Windows from shutting down correctly. There may be insufficient information to explicitly define what happened. To determine what may have happened and to identify a potential
resolution, it is important to know what the computer was doing at the time just before the event occurred.
If event 41 is logged because power to the computer was interrupted, consider obtaining an uninterruptible power supply (UPS) such as a battery backup power supply. An underpowered or failing power supply may cause this behavior. For example, if you added
RAM or additional devices or hard disks when this problem began, the power supply may cause the problem.
You can refer to the conents of this link below:
http://support.microsoft.com/kb/2028504
Please also refer to its troubleshooting method to fix this problem, if encouner any problem, please feel free let me know.
Roger Lu
TechNet Community Support -
Power Map has encountered an error and it needs to close, after changing the graphic settings
I've been using the updated Power Map tool successfully over the past few days.
Last night I was playing around with the graphics settings that can be found under the File Tab (I know that should teach me from playing around and following the user guide :-) ) and I changed the detail from Medium to High (I think) and now all that happens
when I click on create a new tour or select an existing tour is
"Power Map has encountered an error and it needs to close. Power Map can collection information about the error and create an e-mail which you will be able to send to Microsoft and help us fix the problem. Do you want to do this?"
The error that gets generated can be seen below.
Thank you for submitting this error information to Microsoft. We appreciate your help!
System.Exception: Could not create the render target shared resource.
at Microsoft.Data.Visualization.Engine.Graphics.Internal.D3DImage11.SetBackBuffer11(IntPtr pResource)
at Microsoft.Data.Visualization.Engine.Graphics.D3DImage11.SetBackBuffer(RenderTarget renderTarget)
at Microsoft.Data.Visualization.VisualizationControls.GlobeViewModel.CompositionTarget_Rendering(Object sender, EventArgs e)
at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
at System.Windows.Media.MediaContext.AnimatedRenderMessageHandler(Object resizedCompositionTarget)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
I've removed Power Map from the system, restarted, repaired Office, restarted and reinstalled Power Map but the problem remains. So i'm guessing that the setting I changed are stored in the Registry or File System somewhere.
Any help would be gratefully received.
Regards
Rob IrelandIs this still an issue?
This also might be worthy to send to the team as a bug.
You can send it in email using the Smile/Frown feature in the UI.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!
Maybe you are looking for
-
How to play i phone music on smart sony bravia tv
tell me the apps that can connect the i phone to sony tv
-
Is there a setting to wrap code when resizing the application window?
I find it very annoying that I have to scroll horizontally to get to specific areas of my code. Is there some sort of preference that I can set to wrap my code so that it wouldn't extend past the visible area of the application window? Thanks.
-
Can cs5 extended be registered now?
I installed and activated cs5 extended on my Lenovo laptop (Windows 7). However when attempting to register my cs5 with adobe, the serial number is considered invalid. How do I resolve this? I can continue to use the cs 5; however, I would like to up
-
OIM 11gR2 Architecture question
Hello, We're setting up our development environment for OIM 11gR2 and wanted to confirm the concept of configuring a virtual IP for two application servers (each app server containing SOA and OIM). This virtual IP would be setup on a hardware load b
-
Hello experts, Our company uses Oracle 10g DB and we are using Stored Procedures to fetch employees data from various tables. We fetch only fresh data depending on the date when it is retrived. Hence the result of the query depends on Sysdate value.