Kernel reboots right after "Probing EDD"
When booting, the kernel starts to initialize but right after "Probing EDD" it fails, rebooting instead. If i use the kernel option "edd=off" the "Probing EDD" line doesn't show, but still the kernel reboots at that point. I'm convinced this is not an EDD-related problem, but trouble with whatever comes next. FWIW, some googling turned up the idea of trying "hpet=disable" but that made no difference. Tried loading the alternate kernel, got same thing.
What should the kernel be printing after "Probing EDD"?
Potential suspects for the original cause of this problem: i updated with pacman -Syu two days ago which provided a new kernel (2.6.29?), and i've been fiddling with trying to get sound to work again. Maybe i screwed up the kernel modules or some file in /etc/modules.d/. Though this is a laptop, i turn it off only rarely. It's a Gateway 6860FX.
Hi i have the same trouble of EDD and reboot, only way for fix (this happen when the last kernel upgrades) is go to arch, and make again the pacman -S kernel26. My fstab is
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/dvd2 /media/dvd1 auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
#hds
UUID=5a4ea1d2-287a-48b8-b50c-65a59b1d7ed8 / jfs noatime,defaults 0 1
UUID=87b857ca-275f-4bc4-b48a-72eee660e7f0 swap swap defaults 0 0
UUID=9c1d25b0-6f2a-47c3-aaea-42f12e81a4a2 /home ext4 noatime,barrier=0,defaults 0 1
UUID=41eccea1-fb78-4727-b788-5878698cfcba /mnt/disk ext3 defaults 0 1
UUID=e0b55c91-8614-4dd6-862b-c1635c2158b3 /mnt/disk2 reiserfs defaults 0 1
UUID=decca5e5-88b1-43ea-a9dc-63c384c86cc5 /mnt/disk3 ext3 defaults 0 1
UUID=49f202c3-7b86-4a10-8535-85783a30b9f1 /Movies reiserfs defaults 0 1
and, menu.lst:
and # (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/sda1 elevator=deadline
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /boot/vmlinuz26 edd=off root=/dev/disk/by-uuid/5a4ea1d2-287a-48b8-b50c-65a59b1d7ed8 ro
initrd /boot/kernel26-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
any tip, is really welcomed..thx!!
Last edited by enito (2009-06-23 05:15:53)
Similar Messages
-
Kernel Panic right after start up on my PowerBook G4
I get the standard kernel panic message quite frequently after I start up my PowerBook. I have used the Disk Utility (software), and the Hardware Utility to check the system hardware, and both say all is well.
I would appreciate any ideas on how to fix this.
Thanks,
ShawnWell, the "erase and install" feature should do the trick. That does essentially what I was thinking by having you format the drive. No other tricks needed, just update as soon as you're done using the latest combo updater available for your OS version via the software update option in the apple menu.
Happy installing! -
Kernel Panics right after AppleCare Help
Greetings All,
So, my PBG4 1.25 w/ 1Gig ram failed on me awhile back--turns out the logic board needed to be replaced. Luckily, I was still covered under AppleCare. They replaced my logic board, but since I've had it returned, I get repeated Lock-Down and Kernel Panics up the wazoo! :*( ANYONE HELP? Dr. Smoke, I'd appreciate your expertise here. Thanks for taking the time, all.
Blessings,
--sbguy72
Here's a copy of the panic log for the last 3
Fri Jun 2 15:25:02 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000078 PC=0x00000000004AFA64
Latest crash info for cpu 0:
Exception state (sv=0x31B92000)
PC=0x004AFA64; MSR=0x00009030; DAR=0x00000078; DSISR=0x40000000; LR=0x004AFA64; R1=0x174E35F0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x004AFA64 0x004B5808 0x004AFA64 0x004B2F6C 0x004B1E98 0x00109128
0x000D61CC 0x000FE6C0 0x000DC0BC 0x000DC8FC 0x0022C0CC 0x000FDEDC 0x002A4C6C 0x0008A150
0x00061200 0x00063118 0x000A8870 0x000ABD00
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOStorageFamily(1.5)@0x4a0000
Proceeding back via exception chain:
Exception state (sv=0x31B92000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x31B9C280)
PC=0x900D75B8; MSR=0x4000D030; DAR=0xF0080EC4; DSISR=0x40000000; LR=0x900A66C8; R1=0xF0080AB0; XCP=0x00000010 (0x400 - Inst access)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x31B92000)
PC=0x004AFA64; MSR=0x00009030; DAR=0x00000078; DSISR=0x40000000; LR=0x004AFA64; R1=0x174E35F0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x004AFA64 0x004B5808 0x004AFA64 0x004B2F6C 0x004B1E98 0x00109128
0x000D61CC 0x000FE6C0 0x000DC0BC 0x000DC8FC 0x0022C0CC 0x000FDEDC 0x002A4C6C 0x0008A150
0x00061200 0x00063118 0x000A8870 0x000ABD00
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOStorageFamily(1.5)@0x4a0000
Exception state (sv=0x31B9C280)
PC=0x900D75B8; MSR=0x4000D030; DAR=0xF0080EC4; DSISR=0x40000000; LR=0x900A66C8; R1=0xF0080AB0; XCP=0x00000010 (0x400 - Inst access)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Wed Jun 7 16:11:55 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000000A000000 PC=0x000000000023BB40
Latest crash info for cpu 0:
Exception state (sv=0x2D34B780)
PC=0x0023BB40; MSR=0x00009030; DAR=0x0A000000; DSISR=0x40000000; LR=0x0023BB28; R1=0x17583510; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0023BB10 0x0023AE28 0x000FCD64 0x000F0F10 0x002AABD4 0x000ABEB0
0x02097740
Proceeding back via exception chain:
Exception state (sv=0x2D34B780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2D364780)
PC=0x9002858C; MSR=0x0200D930; DAR=0x2DA55000; DSISR=0x42000000; LR=0x90829D8C; R1=0xBFFFD040; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x2D34B780)
PC=0x0023BB40; MSR=0x00009030; DAR=0x0A000000; DSISR=0x40000000; LR=0x0023BB28; R1=0x17583510; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0023BB10 0x0023AE28 0x000FCD64 0x000F0F10 0x002AABD4 0x000ABEB0
0x02097740
Exception state (sv=0x2D364780)
PC=0x9002858C; MSR=0x0200D930; DAR=0x2DA55000; DSISR=0x42000000; LR=0x90829D8C; R1=0xBFFFD040; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Wed Jun 7 16:45:39 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000078 PC=0x00000000002D6384
Latest crash info for cpu 0:
Exception state (sv=0x3AB68C80)
PC=0x002D6384; MSR=0x00009030; DAR=0x00000078; DSISR=0x40000000; LR=0x002D62C0; R1=0x1755BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x002D62C0 0x002D5F1C 0x004C4144 0x004C3994 0x004C3444 0x004C92CC
0x0063EF64 0x002D0940 0x002CF808 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.KeyLargoATA(1.1.0f1)@0x63d000
dependency: com.apple.iokit.IOATAFamily(1.6.0f2)@0x4bd000
com.apple.iokit.IOATAFamily(1.6.0f2)@0x4bd000
Proceeding back via exception chain:
Exception state (sv=0x3AB68C80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2D002C80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x3AB68C80)
PC=0x002D6384; MSR=0x00009030; DAR=0x00000078; DSISR=0x40000000; LR=0x002D62C0; R1=0x1755BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x002D62C0 0x002D5F1C 0x004C4144 0x004C3994 0x004C3444 0x004C92CC
0x0063EF64 0x002D0940 0x002CF808 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.KeyLargoATA(1.1.0f1)@0x63d000
dependency: com.apple.iokit.IOATAFamily(1.6.0f2)@0x4bd000
com.apple.iokit.IOATAFamily(1.6.0f2)@0x4bd000
Exception state (sv=0x2D002C80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Powerbook G4 Mac OS X (10.4.6) 1.25Ghz, 1GIG Ram, New Logic board per AppleCareHi, sbguy72. Welcome to the Discussions.
1. What specific model of PowerBook G4 (PBG4) do you have? Is this the 15-inch FireWire 800 (FW8000) model that came default with a 1.25 GHz processor, or are you running a an older PBG4 with a processor upgrade? Why I ask will become clear later.
2. Your panic logs indicate the following:2.1. All are 0x300 panics, e.g.
Unresolved kernel trap(cpu 0): 0x300 - Data access
and
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
The 0x300 (Data Access) exception indicates the processor could not perform a data memory access. Potential causes, in general terms, include RAM problems, hard disk corruption, and programming errors.
"Programming errors" in this case can include invalid instructions and violations of protected memory, however it is often difficult to differentiate a programming error from a RAM or hard disk problem since the latter two issues can cause a valid instruction to appear invalid.
2.2. In the kernel-loadable modules section of the backtrace, the logs are citing kernel extensions related to storage, primarily your hard drive. This is indicated by the following lines in various logs:
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOStorageFamily(1.5)@0x4a0000
and
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.KeyLargoATA(1.1.0f1)@0x63d000
dependency: com.apple.iokit.IOATAFamily(1.6.0f2)@0x4bd000
com.apple.iokit.IOATAFamily(1.6.0f2)@0x4bd000
This is where my question about your PB G4's model comes in:
• The reference to "KeyLargo" implies the IC (integrated circuit) that controls I/O in certain PowerBook models. In those models (PB G4 with 667, 800, 867, or 1 GHz processors) the KeyLargo IC is responsible for hard drives, USB, Audio, Wireless LAN, modem, and the PMU.
• The PBG4 FW800 that shipped with a 1.25 GHz processor does not use the KeyLargo IC. Instead, it uses the later Intrepid IC, which integrates both memory and I/O control.
I'm not sure if the PBG4 FW800 still uses the KeyLargoATA driver with the Intrepid IC. This jumped out at me so I thought I should mention it.
However, in either case, the panic logs are also flagging IOATA-related devices, generally hard drives although this can also include optical drives.3. Overall the kernel-loadable modules above seem to imply a hard-drive related problem, e.g. your Mac's hard drive, or an attached external drive. They could also imply a continuing logic board problem. The 0x300 again implies RAM, hard drive, or programming issues.
4. What were you doing when the panics occurred?
5. To cut to the chase, see my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics.
Despite the clues above, bear in mind that my FAQ is a roadmap: start at the beginning and work through to the end, following the instruction in the order specified, including the "If all else fails..." section if a cause or resolution is not found in an earlier troubleshooting step therein.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
[SOLVED] Probing EDD then system reboots ???
I read the user who recently asked about this same problem, but i could not solve it.
What happens is, I try to boot and it, stops on Probing EDD and then reboots on me.
I put in the bootloader and did:
arch root=/dev/sda4 (my root partition) and it loaded up.
I tried a /sbin/lilo -v and it give me this error: Fatal: raid_setup: stat("/dev/hda")
I don't have a raid setup though... not sure what this means.
I also tried to this:
arch
mount /dev/sda4 /mnt
mount /dev/sda1 /mnt/boot
mount --bind /dev /mnt/dev
mount-t proc none /mnt/proc
mount -t sysfs none /mnt/sys
chroot /mnt
then tried to run lilo and the same thing happens.
I also tried the Arch fallback and that fails, saying Kernel panic - not syncing. Attempted to kill init!
I found one more thing to try right now...
anyone know what this could be?
Last edited by efourseven (2009-06-19 02:00:40)Thanks you for the reply. Sorry for the confusion, I fixed my typo's in my previous post's. I use lilo. I am not sure how to copy my config files, I dual boot this computer and right now I can only use windows.
My lilo config says:
boot=/dev/hda (which is maybe why I am getting this Fatal: raid_setup: stat: ("/dev/hda") error? It tries to boot up /dev/hda4 as root from the lilo.conf. Should I try switching them to /dev/sda4?
I have been running Arch for quite awhile now, and nothing like this has ever happened. I installed it years ago.
I tried the wiki articals on Boot Recovery, almost all of them. Everytime I try to run lilo it gives me that same error.
Ok.. I got somewhere!!
I just went into my /etc/fstab and /etc/lilo.conf and switched all the /dev/hda to /dev/sda and I am now in the system without the FILESYSTEM CHECK FAIL error. I still cannot boot though. But... I can now copy my config files here...
Here is my lilo.conf
# /etc/lilo.conf
boot=/dev/sda
append="devfs=nomount"
# This line often fixes L40 errors on bootup
# disk=/dev/discs/disc0/disc bios=0x80
default=ArchLinux
timeout=50
lba32
prompt
image=/boot/vmlinuz26
label=ArchLinux
root=/dev/sda4
initrd=/boot/kernel26.img
read-only
image=/boot/vmlinuz26archck
label=ArchFallback
root=/dev/sda4
initrd=/boot/kernel26-fallback.img
read-only
other=/dev/sda2
label=dos
# End of file
and here is my /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
/dev/cdrom0 /mnt/cdrom iso9660 ro,user,noauto,unhide 0 0
/dev/cdrom1 /mnt/cdburn iso9660 rw,user,noauto,unhide 0 0
/dev/sda1 /mnt/usbdrive vfat defaults,user,noauto 0 0
/dev/sdb2 /mnt/ipod vfat noatime,noauto,user,umask=000,quiet,exec 0 0
/dev/sdc1 /mnt/camera vfat defaults,noauto,user 0 0
/dev/sda3 swap swap defaults 0 0
/dev/sda4 / ext3 defaults 0 1
any help would be very much appreciated.
Last edited by efourseven (2009-06-18 02:39:08) -
My Macbook was hacked by somebody right after activating downloaded VLC player.
I couldn’t control my machine. Every thing was messed up! Finally after reboot I realized that even my administration password was changed. Stupid hint I was able to reed: What located in box above low case ? I used my friends computer and founded hot to fix my problem using Unix commands to reboot in a single user mode. I founded a lot of different solutions which had prity the same beginnings but very complicated continuation, which, I understood will force me to cach during restoration anuther crap – time bomb in my mac! Finaly I did restor. somehow. But still feel somebodyies presents. Safary messed up – I will send you a log Itunes – messed up. Speaker in a top menu – grayed, and I can’t control my volume. But the most triky thing – bouth my Apple keybords – internal and mostly bluetouth external also working and typing wired! I am sorry for my spelling, because I cant check spell for Mac’s Word (in Microsoft it was F7) I have also several attacks from my neighbors by community I know their names, because they are somethere very close to me – I can see them throuth FI-FI connection. They often kick-me out from my place and started to use my resaurces. And also Mackeeper make me a hard time!
In Microsoft times u just reinstalled computer – clean installetion from corporate licensed disk. But now I am a beginner in MAC – I love it! But a lot of new and triky – at this way
Fore example – my goal – to do fool Macbook backup at external USB drive using boot srartup option and make my life yaser in case of crash. But now, I don’t know if I can trust recommended program Carbon copy cloner – Ms. Bombich?
I am very sorry for my spelling, because I feel somebodies presents, who playin with me.
Final question Do I need some antivirus Mac compatable which is update paches, service packs? How to map defolt documents folder not to a local, but to external USB?
Esquse me for a lot of questions, but I am beginner in MAC, and I LOVE it!
PS. Good news. Looks like Safari came back! Somebody, probably allredy helping!
But my interface qute different from original – so something still wrong!Didn't really read much at all of your post. Much, much too long, irrelevant details and & no paragraphs.
Can't use time machine due to corruptness
Post over here -> Mac OS X v10.6 - Snow Leopard forum
About my macbook and apple ID how can I upgrade my Macbook from 10.6.3 to 10.6.8 with out all the permissions being changed and corrupt??
Same as above. Post in the correct forum.
Need to gain access to my apple Id that would be a great start
-> http://support.apple.com/kb/HT5625 -
System hangs on reboot/shutdown after kernel upgrades
I've been experiencing the problem that, whenever pacman upgrades the kernel, the system hangs on reboot or shutdown. It only happens on the first reboot/shutdown after a kernel upgrade. I've noticed it consistently for a while now.
To reboot, I issue:
# reboot
To shutdown, I issue:
# shutdown -h now
I should also mention that I typically reboot after kernel upgrades because hotplugged storage devices (USB, SD) fail to be detected unless the system reboots. That is, devices plugged in during the upgrade remain usable, but plugging in something new appears in /dev. There may be an obvious reason for it that I'm missing, but it's never bothered me enough to look into it. Not sure if this and the reboot/shutdown issue are related, though.
Any ideas would be greatly appreciated. Thanks!When Apple Hardware Test says there is a problem, there definitely is a problem.
But like many diagnostics, it does not catch everything.
It can increase your confidence that you do not have gross flaws. The Hardware problems that remain may be more subtle ones. -
[Solved] KDEmod 4.2.3, Xserver/KDM crashes right after start
Hey, I already described my problem in a different topic, but since there was no one actually having that same problem I thought I rather open my own topic here.
Since I updated KDEmod to 4.2.3, I can't login anymore. I see the Xserver starting and have these weird "graphic bug" lines as usual, but then it just hangs there instead of loading KDM. After a few tests I found out, that deleting the xorg.conf solves the problem and I can login again as usual. The problem for me is that I need the xorg.conf because of my Wacom tablet and also because I want to disable the tapping of my touchpad. Maybe that can be done outside of xorg.conf, but at least the Wacom part can't (as far as I know).
So, I'll just post my xorg.conf and the log of /var/log/Xorg.0.log, if you need anything else, tell me.
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "screen" 0 0
InputDevice "Mouse" "CorePointer"
InputDevice "Keyboard" "CoreKeyboard"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "dri"
Load "GLcore"
Load "record"
Load "extmod"
Load "glx"
Load "drm"
Load "dbe"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "kbd"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
#Option "Device" "/dev/input/mouse_udev"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse2"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "0"
Option "MaxTapMove" "0"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Mode" "Absolute"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "USB" "on"
Option "Vendor" "WACOM"
Option "Threshold" "5" #the official linuxwacom howto advises this line
Option "KeepShape" "on"
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
#Option "Mode" "Relative" #other option:"Absolute"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "USB" "on"
Option "Vendor" "WACOM"
Option "Threshold" "5" #the official linuxwacom howto advises this line
Option "KeepShape" "on"
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
#Option "Mode" "Relative" #other option:"Absolute"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "USB" "on"
Option "Vendor" "WACOM"
EndSection
Section "Monitor"
Identifier "monitor"
VendorName "LPL"
ModelName "0"
DisplaySize 336 210 # 96 DPI, 1280x800 (non 4:3 aspect)
EndSection
Section "Device"
Identifier "ati"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X700 (PCIE)"
Option "UseEdidDPI" "false"
Option "DPI" "96 x 96"
Option "NoDDC" "true"
BusID "PCI:1:0:0"
Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
Option "ColorTiling" "on"
Option "AGPMode" "4"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
Option "AGPFastWrite" "yes"
EndSection
Section "Screen"
Identifier "screen"
Device "ati"
Monitor "monitor"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Xorg.0.log
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux rodriguez 2.6.29-ARCH #1 SMP PREEMPT Sat May 9 12:47:43 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 11 17:05:42 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "screen" (0)
(**) | |-->Monitor "monitor"
(**) | |-->Device "ati"
(**) |-->Input Device "Mouse"
(**) |-->Input Device "Keyboard"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "cursor"
(**) |-->Input Device "stylus"
(**) |-->Input Device "eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0x90000000/134217728, 0xc0000000/65536, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000c0000000
(II) RADEON(0): MMIO registers at 0x00000000c0000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "AGPFastWrite" "yes"
(**) RADEON(0): Option "EnablePageFlip" "on"
(**) RADEON(0): Option "ColorTiling" "on"
(**) RADEON(0): Option "AccelMethod" "EXA"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X700 (M26) (PCIE)" (ChipID = 0x5653)
(--) RADEON(0): Linear framebuffer at 0x0000000090000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1179 SubsystemID: 0xff10
IOBaseAddress: 0xc000
Filename:
BIOS Bootup Message:
Req14228-Aeric lin Rel9.10.1.0/CL197152
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 350000
(II) RADEON(0): Default Memory Clock: 283000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 500000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 200000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(**) RADEON(0): Page Flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 50000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 350.000000, mclk: 283.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=7 min=20000 max=50000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71250
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 2, VSyncWidth: 6
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): TMDS PLL from BIOS: 16500 b0112
encoder: 0x4
encoder: 0x1
encoder: 0x2
(II) RADEON(0): Output VGA-0 using monitor section monitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVDS
DDC reg: 0x68
(II) RADEON(0): Port2:
XRANDR name: DVI-0
Connector: DVI-I
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
Atom Get EDID success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(**) RADEON(0): Option "NoDDC" "true"
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Atom Get EDID success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1280x800
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (336, 210) mm
(**) RADEON(0): DPI set to (96, 145)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): MM_TABLE: d0-f7-c6-02-00-74-08-80-e6-4c-c0-e6-02-0a
(II) RADEON(0): This card has MM_TABLE we do not recognize.
If your card is TV-in capable you will need to specify options RageTheatreCrystal, RageTheatreTunerPort,
RageTheatreSVideoPort and TunerType in /etc/X11/xorg.conf.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit 90000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0x97ff9000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 131040 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x005dc000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x005e0000
(II) RADEON(0): Will use 6000 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 32 kb for PCI GART at offset 0x07ff8000
(II) RADEON(0): Will use 6000 kb for back buffer at offset 0x005e4000
(II) RADEON(0): Will use 6000 kb for depth buffer at offset 0x00bc0000
(II) RADEON(0): Will use 56320 kb for textures at offset 0x0119c000
(II) RADEON(0): Will use 56688 kb for X Server offscreen at offset 0x0489c000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0x90000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf86e6000
(II) RADEON(0): [pci] ring handle = 0xf86e6000
(II) RADEON(0): [pci] Ring mapped at 0xb793f000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf87e7000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb793e000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf87e8000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xaf6a2000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf89e8000
(II) RADEON(0): [pci] GART Texture map mapped at 0xada22000
(II) RADEON(0): [drm] register handle = 0x28000000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x97ff9000 0x97ff9000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x97ff9000 is: 0x97ff9000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x97ff9000 0x97ff9000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) RADEON(0): num quad-pipes is 2
(II) EXA(0): Offscreen pixmap area of 58048512 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable LVDS
disable LVDS
init memmap
init common
init crtc1
init pll1
freq: 71250000
best_freq: 71357143
best_feedback_div: 74
best_ref_div: 7
best_post_div: 4
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x97ff9000 0x97ff9000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable primary dac
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "UseEdidDPI" is not used
(WW) RADEON(0): Option "DPI" is not used
(WW) RADEON(0): Option "XAANoOffscreenPixmaps" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
(**) Option "Protocol" "ImPS/2"
(**) Mouse: Device: "/dev/input/mice"
(**) Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse: ZAxisMapping: buttons 4 and 5
(**) Mouse: Buttons: 9
(**) Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
(**) Mouse: (accel) keeping acceleration scheme 1
(**) Mouse: (accel) filter chain progression: 2.00
(**) Mouse: (accel) filter stage 0: 20.00 ms
(**) Mouse: (accel) set acceleration profile 0
(II) Mouse: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Keyboard: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Keyboard: XkbVariant: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
(II) Synaptics touchpad driver version 1.1.0
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(II) Touchpad: x-axis range 1472 - 5472
(II) Touchpad: y-axis range 1408 - 4448
(II) Touchpad: pressure range 0 - 255
(II) Touchpad: finger width range 0 - 0
(II) Touchpad: buttons: left right middle double triple
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "0"
(**) Option "MaxTapMove" "0"
(**) Option "VertScrollDelta" "100"
(**) Option "MinSpeed" "0.06"
(**) Option "MaxSpeed" "0.12"
(**) Option "AccelFactor" "0.0010"
(--) Touchpad touchpad found
(**) Option "SendCoreEvents"
(**) Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Touchpad" (type: TOUCHPAD)
(**) Touchpad: (accel) keeping acceleration scheme 1
(**) Touchpad: (accel) filter chain progression: 2.00
(**) Touchpad: (accel) filter stage 0: 20.00 ms
(**) Touchpad: (accel) set acceleration profile 0
(--) Touchpad touchpad found
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/input/wacom
(**) cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) cursor: reading USB link
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(II) UnloadModule: "wacom"
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/input/wacom
(**) stylus is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) stylus: reading USB link
(**) Option "KeepShape" "on"
(**) stylus: keeps shape
(**) Option "Threshold" "5"
(**) stylus: threshold = 5
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(II) UnloadModule: "wacom"
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/wacom
(**) eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) eraser: reading USB link
(**) Option "KeepShape" "on"
(**) eraser: keeps shape
(**) Option "Threshold" "5"
(**) eraser: threshold = 5
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(II) UnloadModule: "wacom"
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813278b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80dda61]
2: [0xb80a1400]
3: /usr/bin/X(ActivateDevice+0x4f) [0x808504f]
4: /usr/bin/X(InitAndStartDevices+0x42) [0x8085e42]
5: /usr/bin/X(main+0x36f) [0x8071eef]
6: /lib/libc.so.6(__libc_start_main+0xe6) [0xb7c5d6b6]
7: /usr/bin/X [0x8071401]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) UnloadModule: "synaptics"
I already looked up the "signal 11" error message but didn't find anything helpfull. And I tried to make a "minimal" xorg.conf with only the touchpad and the Wacom properties, but then the Xserver complained that there is no screen set. So if someone could help me minimize the xorg.conf, that would maybe be enough if there are no other solutions.
Last edited by JonathanArcher (2009-05-13 15:40:14)Ok, I have no idea why, but the Wacom tablet gets recognized properly (it seems) by X. Still there are two problems I'd like to solve, one being the fact that I have a 16:10 monitor, but the tablet is 4:3. With xorg.conf I could set it right (Option Keepshape), but how can I do that without the conf file? Also, how can I disable touchpad tapping without the xorg.conf?
-
Kernel26 2.6.26.3-1: Probing EDD [SOLVED, like]
Hi,
After the upgrade to kernel26 2.6.26.3-1 the boot process stops at the kernel message "Probing EDD...". The situation gets scary as I discover that livecds like MiniMe and Knoppix refuse to boot too. Thanks to another box (not yet upgraded) found about kernel option edd=off. I edited edd=off first into GRUB command line; now the system is back to normal, though during the boot process kernel complains a lot about this or that (sata3) undetected, relinked, etc. Is my situation safe or there are proper measured to be taken?
My /boot/grub/menu.lst:
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,1)
kernel /boot/vmlinuz26 edd=off root=/dev/disk/by-label/Root ro
initrd /boot/kernel26.img
# (0) Arch Linux
title Arch Linux BootChart
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/disk/by-label/Root init=/sbin/bootchartd ro
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/disk/by-label/Root ro
initrd /boot/kernel26-fallback.img
title Memtest86+ [/boot/memtest86+/memtest.bin]
kernel (hd0,1)/boot/memtest86+/memtest.bin
# (1) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Last edited by Llama (2008-09-05 11:43:19)A bit of additional information: after the upgrade EDD failure shows on the fallback kernel as well as on the current (2.6.26.3-1) kernel. Which means that some other piece of software/configuration is to blame.
A post here suggested a syslinux trouble; I've tried pacman and discovered that syslinux has never been installed on my system. So my Arch is supposed to run without it. I don't want to experiment in the dark - any suggestions? -
Can't connect to the internet right after boot up
Hey guys, I have an interesting problem in which if I try to use internet right after boot up (via scripts) I can't resolve host names. However, if I try to use the internet right after boot up manually I can resolve host names. I had this problem with a script but I've since rewrote it to work around the problem; however I now seem to have this problem with openVPN and I need this to work. I'll use openVPN as my primary example but the situation was the same for my script.
Basically, openVPN starts up via systemd and it can't resolve my server's host name. Even 18 hours later. I have 'resolv-retry infinite' in my conf file which as I understand says 'if you can't resolve the host name keep trying to resolve it indefinitely'. I left my computer on overnight and openVPN still could not connect to my server, despite me being able to ping it, have MySQL get data dumps and replicate from it and other software being able to resolve the server's host name. If I restart openVPN, then it works! I rebooted the computer and let it try for a few minutes to connect and it couldn't. I restarted openVPN manually and it resolved the server's host name, 5 minutes after the computer booted up even though it couldn't connect on it's own the previous night.
Here's openVPN's status as of this post:
[email protected] - OpenVPN connection to client
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: active (running) since Thu 2013-05-02 14:10:02 MDT; 58min ago
Process: 248 ExecStart=/usr/sbin/openvpn --cd /etc/openvpn --config /etc/openvpn/%i.conf --daemon openvpn@%i (code=exited, status=0/SUCCESS)
Main PID: 254 (openvpn)
CGroup: name=systemd:/system/[email protected]/client
ââ254 /usr/sbin/openvpn --cd /etc/openvpn --config /etc/openvpn/client.conf --daemon openvpn@client
May 02 15:07:52 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:07:57 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:02 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:07 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:12 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:17 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:22 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:27 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:32 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:37 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
Here is my conf file:
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote my.server.com 1194
;remote my-server-2 1194
# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random
# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite
# Most clients don't need to bind to
# a specific local port number.
nobind
# Downgrade privileges after initialization (non-Windows only)
user nobody
group nobody
# Try to preserve some state across restarts.
persist-key
persist-tun
# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert host.crt
key host.key
# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
ns-cert-type server
# If a tls-auth key is used on the server
# then every client must also have the key.
tls-auth ta.key 1
# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x
# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo
# Set log file verbosity.
verb 3
# Silence repeating messages
;mute 20
Anyone have any idea what could be going on? It seems to me that when a program starts up it takes a snap shot of the current network status and it then uses it, even if it's 10 minutes later and the network has been fully loaded/configured, the program uses that snap shot and can't connect to the DNS.
Last edited by anEveryDayGuy (2013-05-02 21:20:47)'Requires=network.target' wasn't in it so I added it but nothing's changed. I've left it in because openVPN does require network.
As I said, I had this problem with a script so I don't think it's anything specific to openVPN. I had a weird occurrence this morning however. When I started the computer up this morning openVPN worked just fine. However when the computer rebooted openVPN couldn't resolve the host address again. -
Audio stops working right after login
Hi everyone, I have a macbook pro 13inch mid 2009 running mac osx 10.7 lion. Few weeks ago the audio stopped working but after few moments and 2 reboots it started to work fine again. Now are 2 days that the problem came back. I tried to reboot multiple times, to reset the nvram and pram, to use headphones (they dont work either) and to kill the process coreaudiod. Still nothing! I know that it is not a hardware problem since the sounds stops working just right after I login (the sound at the start works and on the login screen the audio controllers still emit the sound), the only sound that seems work after the login is the sound of the trash folder when I empty it (weird isnt it?). I know that a osx reinstallation would probably solve the problem but I dont have time for that right now and I dont want to risk to lose some file. Does any of you have any solution?
System Preferenes > Sound > Output > Internal Speakers
Make sure that Mute is not enabled.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
Best. -
my ipod nano just stopped working right after playing a song, any suggestions to get it back working?
Did the battery run out of power? If not, try doing a Reset to "reboot" the iPod
http://support.apple.com/kb/ht1320
(A Reset does NOT erase the iPod.) -
DVD tray closing right after opening.
Hi, everybody!
I just bought a sata DVD recorder and I'm having some problems with it. During the startup, I receive the following message repeatedly:
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata4: EH complete
ata4.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
ata4: hard resetting link
Then, when I try to open the tray, it closes right after opening (either by pressing the eject button or using the command line). Even with only one second, I managed to insert a disc, just to see if the system would recognize it. The DVD was read normally, but I almost broke the disc trying to insert it on the drive. First, I thought it could be a problem with the drive, so I replaced it with another model, but the problem persisted. I have dual boot with Windows XP and the problem is not happening in that OS. I don't know what kind of information would be useful to provide. My system is up-to-date and I tried both a Samsung drive and a LG (which is the current one).
Thanks.Here's the output:
dmesg | egrep "DVD|cdrom":
ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
cdrom: Uniform CD-ROM driver Revision: 3.20
lsmod | egrep "ata|pci|ide":
videodev 57747 1 gspca_main
v4l1_compat 13986 1 videodev
i2c_core 16029 2 videodev,nvidia
pci_hotplug 21691 1 shpchp
sata_sis 3074 6
pata_acpi 2348 0
pata_sis 7504 1 sata_sis
libata 151324 5 sata_sis,pata_acpi,pata_sis,ahci,libahci
scsi_mod 107414 4 sg,sr_mod,sd_mod,libata
udevadm info --name=/dev/dvd --attribute-walk:
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:05.0/host3/target3:0:0/3:0:0:0/block/sr0':
KERNEL=="sr0"
SUBSYSTEM=="block"
DRIVER==""
ATTR{range}=="1"
ATTR{ext_range}=="1"
ATTR{removable}=="1"
ATTR{ro}=="0"
ATTR{size}=="2097151"
ATTR{alignment_offset}=="0"
ATTR{discard_alignment}=="0"
ATTR{capability}=="19"
ATTR{stat}==" 0 0 0 0 0 0 0 0 0 0 0"
ATTR{inflight}==" 0 0"
looking at parent device '/devices/pci0000:00/0000:00:05.0/host3/target3:0:0/3:0:0:0':
KERNELS=="3:0:0:0"
SUBSYSTEMS=="scsi"
DRIVERS=="sr"
ATTRS{device_blocked}=="0"
ATTRS{type}=="5"
ATTRS{scsi_level}=="6"
ATTRS{vendor}=="HL-DT-ST"
ATTRS{model}=="DVDRAM GH22NS50 "
ATTRS{rev}=="TN03"
ATTRS{state}=="running"
ATTRS{timeout}=="30"
ATTRS{iocounterbits}=="32"
ATTRS{iorequest_cnt}=="0xb84"
ATTRS{iodone_cnt}=="0x2eb"
ATTRS{ioerr_cnt}=="0x2"
ATTRS{modalias}=="scsi:t-0x05"
ATTRS{evt_media_change}=="0"
ATTRS{queue_depth}=="1"
ATTRS{queue_type}=="none"
looking at parent device '/devices/pci0000:00/0000:00:05.0/host3/target3:0:0':
KERNELS=="target3:0:0"
SUBSYSTEMS=="scsi"
DRIVERS==""
looking at parent device '/devices/pci0000:00/0000:00:05.0/host3':
KERNELS=="host3"
SUBSYSTEMS=="scsi"
DRIVERS==""
looking at parent device '/devices/pci0000:00/0000:00:05.0':
KERNELS=="0000:00:05.0"
SUBSYSTEMS=="pci"
DRIVERS=="sata_sis"
ATTRS{vendor}=="0x1039"
ATTRS{device}=="0x0180"
ATTRS{subsystem_vendor}=="0x1043"
ATTRS{subsystem_device}=="0x810e"
ATTRS{class}=="0x010485"
ATTRS{irq}=="17"
ATTRS{local_cpus}=="ff"
ATTRS{local_cpulist}=="0-7"
ATTRS{modalias}=="pci:v00001039d00000180sv00001043sd0000810Ebc01sc04i85"
ATTRS{dma_mask_bits}=="32"
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
cat /proc/interrupts:
CPU0 CPU1
0: 46 0 IO-APIC-edge timer
1: 1851 0 IO-APIC-edge i8042
3: 2 0 IO-APIC-edge
4: 3 0 IO-APIC-edge
6: 5 0 IO-APIC-edge floppy
7: 0 0 IO-APIC-edge parport0
8: 4 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 44294 0 IO-APIC-edge i8042
14: 0 0 IO-APIC-edge pata_sis
15: 0 0 IO-APIC-edge pata_sis
16: 93752 0 IO-APIC-fasteoi nvidia
17: 37865 0 IO-APIC-fasteoi sata_sis
18: 45068 0 IO-APIC-fasteoi SiS SI7012
19: 45015 0 IO-APIC-fasteoi eth0
20: 191288 0 IO-APIC-fasteoi ohci_hcd:usb2
21: 0 0 IO-APIC-fasteoi ohci_hcd:usb3
22: 0 0 IO-APIC-fasteoi ohci_hcd:usb4
23: 2 0 IO-APIC-fasteoi ehci_hcd:usb1
NMI: 12 10 Non-maskable interrupts
LOC: 236425 264084 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 12 10 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RES: 451444 491406 Rescheduling interrupts
CAL: 609 534 Function call interrupts
TLB: 2219 3424 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 6 6 Machine check polls
ERR: 1
MIS: 0 -
Some multiple issues since Yosemite install...working them out. But I am puzzled by this. Never witnessed loading of files before desktop since my Windows days! Is this normal? I am especially curious because right after upgrade, I had, and resolved an issue with DownLite that I did not know I had and somehow possibly got 'awakened' with Yosemite. Want to be sure all is good....
Thanks!p.s. ......this happens EVERY TIME after a reboot; but NOT after signing back on after putting my mac to sleep.
-
I updated my ipad today. right after it updated, the screen went black. Since then I have not been able to turn on my ipad. I am recharging it. It has been recharging for 55 minutes. I have tried to reboot, nothing. I have tried everything i know to do. Nothing What else can I do?
You may need to try recovery mode now. Read this.
iOS: Unable to Update or Restore -
Kernel Panic Immediately After Full Time Machine Backup
Hi, after I reinstalled my OS from a previous Time Machine backup, I've been getting a kernel panick:
panic(cpu 0 caller 0xffffff80005418bf): "Process 1 exec of /sbom/launchd failed. errno 88"@/SourceCache/xnu/xnu-1699.32.7/bsd/kern/kern_exec.c:3546
Here's my specs:
- OS: Went from Leopard 10.5.8 to Lion 10.7.5. (Reinstalled OS X from default installation disc then reinstalled OS X from a 10.7.5 backup; Was having trouble booting with 10.5.8)
- Hard Drive: 2008 Intel Core Duo
- RAM: 4GB installed
Any ideas? I've already tried resetting PRAM and NVRAM. It occured right after I installed the Time Machine backup, when it tells you to restart your computer. I was having previous boot problems where my Mac just wouldn't boot, that's why I reverted to 10.5.8. That was working perfectly fine, until I restarted... Then the never ending gray startup screen popped up again.
Any help would be appreciated. Thanks.robbertj1985 wrote:
- Formatted my HD. Then did a clean install of mountain lion.
That's usually overkill. Just installing a fresh version of Lion (or upgrading to Mountain Lion), without disturbing anything else, will fix 99% of problems with OSX.
- Tried to restore my documents manually but got a lot of rights-issues,
The user account you set up wasn't recognized as being the same one as on the backups. It's a slightly different cause, but see the pink box in Problems after using Migration Assistant for an explanation.
- Tried to restore my TM backup by booting from Mountain lion 10.8 bootable disk, trying to restore to 10.7.5.
Do you mean an InstallESD.dmg? If so, that should work, but I don't recall if I've done it lately, and that may have updated your Recovery HD to the Mountain Lion version. Do you have a Lion version you can use instead? If you do, erase the whole disk (not just the OSX partition), then restore the Lion backup.
Does your Recovery HD work? If so, that's the easiest -- just start up from it and do the Restore.
If not, and your Mac came with Lion, you should be able to erase the entire disk and use Internet Recovery to do the restore (or download and install a fresh copy of Lion), then use Setup Assistant to transfer your stuff.
Maybe you are looking for
-
How do i move PC music files to itunes?
Is it posslible to move the music files in one's PC (windows media) to the itunes? I downloaded itunes; it imported SOME of my music....but not all of it. Is there a reason for this? Can all the files be moved?
-
Service control manager error, event 7011
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7011</E
-
So I'm having trouble with this error message coming up when I'm trying to make stuff. (The Operation could not be completed") At the moment I have been trying to make a fairly large giff, that, for whatever reason is 400mb, after i go in to save for
-
Good afternoon, How do I know which lenses "fit" the body of the new EOS 70D? I also own the EOS Rebel T2i and those lenses do not fit the 70D body. Thank you....frustrated. Solved! Go to Solution.
-
when exporting a movie in HD, it is better to use the same resolution as the movie was recorded in or a higher resolution? my Camera records in 1280x720 pixels - is it better to export in 720p or 1080i ? thanks for your help