Kernel.shmmax on Linux 64 bit (SLES 10 x86_64)
i'm installing 10gR2 on SLES 10 x86_64 bit on a machine with 64 bit xeon processors and i'm a bit confused
about the setting of kernel parameter kernel.shmmax. According to note 373681.1 and other similar notes
of requirements for installations on linux 64 bit it seems that this values can be setted at a maximum of
4gb and i can't understand why. For what i know Oracle tries to allocate SGA on one large shared memory
segment and the parameter kernel.shmmax for what i've understand limits the maximum size of shared memory
segments, with kernel.shmall. So if i set kernel.shmmax to 4 GB i'm not able to set SGA_MAX_SIZE to a value
higher than 4 gb and this is not what i want.
So, why on all notes i've found on the web it is written to set the parameter to a values max of 4 GB????
Regards,
Cristian Cudizio
On a 32 bit machine max addressable memory is 2^32-1^ which comes to 2GB considering one parity bit actual usable size for SGA is aroung 1.7-1.8GB. Using VLM/AWE you can increase upto 4gb (which comes to across 3.7GB usable). These are all limits given for 32bit machine which i could come across in metalink but I am not sure where is 4GB limit for 64bit machine specified as i don't have metalink access now. So, I cannot say anything about the doc which haven't seen.
Thanks
Similar Messages
-
Prerequisites needed for installing R12 in linux (64-bit)
Hi,
Please list the OS Prerequisites needed for installing R12 (Vision dB) in RedHat ES. Please also let me know whether it will support 64-bit
Thanks,
AnandI do not think it is possible to paste the whole page. However, please find below all the details which are relevant to Red Hat Enterprise Linux AS/ES 4.0
Kernel Requirements & Settings
Red Hat Enterprise Linux AS/ES 4.0: 2.6.9-42.EL
Edit the /etc/sysctl.conf file to configure your kernel settings. After editing the file, use the "sysctl -p" command or restart the system to invoke the new settings.
kernel.semmsl: 256
kernel.semmns: 32000
kernel.semopm: 100
kernel.semmni: 142
kernel.shmall: 2097152
kernel.shmmax: Half the size of the physical memory (in bytes), and at least 2147483648
kernel.shmmni: 4096
kernel.msgmax: 8192
kernel.msgmnb: 65535
kernel.msgmni: 2878
fs.file-max: 65536
net.ipv4.ip_local_port_range: 1024 65000
net.core.rmem_default: 262144
net.core.rmem_max: 262144
net.core.wmem_default: 262144
net.core.wmem_max: 262144
Required Packages
- binutils-2.15.92.0.2-21.x86_64.rpm
- compat-db-4.1.25-9.i386.rpm (32-bit)
- compat-db-4.1.25-9.x86_64.rpm
- control-center-2.8.0-12.rhel4.5.x86_64.rpm
- gcc-3.4.6-3.x86_64.rpm
- gcc-c++-3.4.6-3.x86_64.rpm
- glibc-2.3.4-2.25.i686.rpm (32-bit)
- glibc-2.3.4-2.25.x86_64.rpm
- glibc-devel-2.3.4-2.25.i386.rpm (32-bit)
- glibc-devel-2.3.4-2.25.x86_64.rpm
- glibc-common-2.3.4-2.25.x86_64.rpm
- gnome-libs-1.4.1.2.90-44.1.x86_64.rpm
- libstdc++-3.4.6-3.i386.rpm (32-bit)
- libstdc++-3.4.6-3.x86_64.rpm
- libstdc++-devel-3.4.6-3.i386.rpm (32-bit)
- libstdc++-devel-3.4.6-3.x86_64.rpm
- libgcc-3.4.6-3.i386.rpm (32-bit)
- libgcc-3.4.6-3.x86_64.rpm
- make-3.80-6.EL4.x86_64.rpm
- pdksh-5.2.14-30.3.x86_64.rpm
- setarch-1.6-1.x86_64.rpm
- sysstat-5.0.5-11.rhel4.x86_64.rpm
- xscreensaver-4.18-5.rhel4.11.x86_64.rpm
- openmotif21-2.1.30-11.RHEL4.6.i386.rpm**
- libaio-0.3.105-2.x86_64.rpm
- libaio-0.3.105-2.i386.rpm (32-bit)
- libaio-devel-0.3.105-2.x86_64.rpm
Software Requirements
- ar
- gcc
- g++
- ksh
- ld
- linux32
- make
- X Display Server
Verifying Host Names
1) Verify that the /etc/hosts file is formatted as follows:
127.0.0.1 localhost.localdomain localhost
<ip_address> <node_name>.<domain_name> <node_name>
2) Verify that the /etc/sysconfig/network file is formatted as follows:
HOSTNAME=<node_name>.<domain_name>
3) If the /etc/sysconfig/networking/profiles/default/network file exists, remove it.
4) If you changed any files in the previous steps, restart the system.
Modifying the Number of Open File Descriptors
Open the /etc/security/limits.conf file and change the existing values for "hard" and "soft" parameters as follows. Restart the system after making changes (If the current value for any parameter is higher than the value listed in this document, then do not change the value of that parameter):
* hard nofile 65535
* soft nofile 4096
* hard nproc 16384
* soft nproc 2047 -
Problem installing OBIEE 11.1.1.6 on Linux 64-bit - redux
I had posted an issue earlier about not being able to install the Software Only on my Linux 64-bit. That problem has not been solved, but this is a new (possibly related) issue.
I created a brand new installation of Linux, with an Oracle 11gR2 database, and created the BI repositories using rcu for 11.1.1.6
I then navigated to bishiphome/Disk1/install/linux64 and ran runInstaller.
Everything looks fine, all the way up to Step 13 of 15, where the installer is supposed to start copying files. It "hangs up" at that point. The tests for adequate swap space and Temp space are passed:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 1536 MB. Actual 4578 MB Passed
Checking swap space: must be greater than 500 MB. Actual 7999 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-04-03_12-13-01PM. Please wait ...
It is running into an issue with a String Index out of bounds - Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
Here is the full .out file:
Adding /tmp/OraInstall2013-04-03_12-13-01PM for deletion.
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/bi.jar
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/template.jar
null
configFileName:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/footprint.xml
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
Setting current page standalone validations to true
Setting current page standalone validations to true
Setting current page standalone validations to true
Inside startPreReqOperation...prereq
contextFile:/tmp/OraInstall2013-04-03_12-13-01PM/prereq/oui/agent_prereq_context.xml
The entry point is: oracle.installType.all
Check Name:CertifiedVersions
Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
Expected result: One of oracle-6,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual Result: oracle-5.6
Check complete. The overall result of this check is: Passed
Check Name:Packages
Check Description:This is a prerequisite condition to test whether the packages recommended for installing the product are available on the system.
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-20.el5_8.3-x86_64.Passed
Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386. Passed
Checking for elfutils-libelf-0.125; found elfutils-libelf-0.137-3.el5-x86_64. Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.137-3.el5-x86_64. Passed
Checking for gcc-4.1.1; found gcc-4.1.2-54.el5-x86_64. Passed
Checking for gcc-c++-4.1.1; found gcc-c++-4.1.2-54.el5-x86_64. Passed
Checking for glibc-2.5-12-x86_64; found glibc-2.5-107-x86_64. Passed
Checking for glibc-2.5-12-i686; found glibc-2.5-107-i686. Passed
Checking for glibc-common-2.5; found glibc-common-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-x86_64; found glibc-devel-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-12-i386; found glibc-devel-2.5-107-i386. Passed
Checking for libaio-0.3.106-x86_64; found libaio-0.3.106-5-x86_64. Passed
Checking for libaio-0.3.106-i386; found libaio-0.3.106-5-i386. Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.106-5-x86_64. Passed
Checking for libgcc-4.1.1-x86_64; found libgcc-4.1.2-54.el5-x86_64. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-54.el5-i386. Passed
Checking for libstdc++-4.1.1-x86_64; found libstdc++-4.1.2-54.el5-x86_64. Passed
Checking for libstdc++-4.1.1-i386; found libstdc++-4.1.2-54.el5-i386. Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.1.2-54.el5-x86_64. Passed
Checking for make-3.81; found make-1:3.81-3.el5-x86_64. Passed
Checking for sysstat-7.0.0; found sysstat-7.0.2-12.0.1.el5-x86_64. Passed
Check complete. The overall result of this check is: Passed
Check Name:Kernel
Check Description:This is a prerequisite condition to test whether the minimum required kernel parameters are configured.
Checking for VERSION=2.6.18; found VERSION=2.6.32-300.39.5.el5uek. Passed
Checking for hardnofiles=4096; found hardnofiles=131072. Passed
Checking for softnofiles=4096; found softnofiles=131072. Passed
Check complete. The overall result of this check is: Passed
Check Name:GLIBC
Check Description:This is a prerequisite condition to check whether the recommended glibc version is available on the system
Expected result: ATLEAST=2.5-12
Actual Result: 2.5-107
Check complete. The overall result of this check is: Passed
Check Name:TotalMemory
Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
Expected result: 1024MB
Actual Result: 5992MB
Check complete. The overall result of this check is: Passed
Check Name:Check Env Variable
Check Description:Check for LD_ASSUME_KERNEL
Expected result: LD_ASSUME_KERNEL environment variable should not be set in the environment.
Actual Result: Variable Not set.
Check complete. The overall result of this check is: Passed
Setting current page standalone validations to true
Setting current page standalone validations to true
In processErrorMsgStringDomain Name
In processErrorMsgStringValid domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters, and include at least one alphanumeric character.
In processErrorMsgStringAdministrator Password
In processErrorMsgStringValid passwords are 8 to 30 characters long, must begin with an alphabetic character,use only alphanumeric, underscore (_), dollar ($) or pound (#) characters and include at least one number.
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringThe value may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
resultset.getStatus() : true
Setting current page standalone validations to true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
In processErrorMsgStringDomain Home
In processErrorMsgStringOracle Instance
In processErrorMsgStringMiddleware Home
In processErrorMsgStringInstance Name
In [email protected]_invalidCharMsgString
Obtained the single page data..SpecifyHomeInformationPage
In processErrorMsgStringWebLogic Server Home
In processErrorMsgStringOracle Home
In processErrorMsgStringOracle Home Directory
In [email protected]_OracleDirectoryInvalidErrorString
Obtained the single page data..SpecifyHomeInformationPage
Entering the exec handler method in get free space for home...
quotaNeededProperty:null
isQuotaNeeded : false
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
resultset.getStatus() : true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
Setting current page standalone validations to true
OS: <LINUX> commad: </sbin/ifconfig -a> pattern: <inet(\s+.*:)?\s*\d+\.\d+\.\d+\.\d+>
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringBIPLATFORM schema user name
In processFieldStringBIPLATFORM schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : false
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting collector hub url in screen:null
In doFinish method checking for inventory lock...InstallProgressPage
Next page is a progress page and the inventory lock is false
Setting current page standalone validations to true
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
Adding /tmp/OraInstall2013-04-03_12-13-01PM for deletion.
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/bi.jar
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/template.jar
null
configFileName:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/footprint.xml
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
Setting current page standalone validations to true
Setting current page standalone validations to true
Setting current page standalone validations to true
Inside startPreReqOperation...prereq
contextFile:/tmp/OraInstall2013-04-03_12-13-01PM/prereq/oui/agent_prereq_context.xml
The entry point is: oracle.installType.all
Check Name:CertifiedVersions
Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
Expected result: One of oracle-6,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual Result: oracle-5.6
Check complete. The overall result of this check is: Passed
Check Name:Packages
Check Description:This is a prerequisite condition to test whether the packages recommended for installing the product are available on the system.
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-20.el5_8.3-x86_64.Passed
Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386. Passed
Checking for elfutils-libelf-0.125; found elfutils-libelf-0.137-3.el5-x86_64. Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.137-3.el5-x86_64. Passed
Checking for gcc-4.1.1; found gcc-4.1.2-54.el5-x86_64. Passed
Checking for gcc-c++-4.1.1; found gcc-c++-4.1.2-54.el5-x86_64. Passed
Checking for glibc-2.5-12-x86_64; found glibc-2.5-107-x86_64. Passed
Checking for glibc-2.5-12-i686; found glibc-2.5-107-i686. Passed
Checking for glibc-common-2.5; found glibc-common-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-x86_64; found glibc-devel-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-12-i386; found glibc-devel-2.5-107-i386. Passed
Checking for libaio-0.3.106-x86_64; found libaio-0.3.106-5-x86_64. Passed
Checking for libaio-0.3.106-i386; found libaio-0.3.106-5-i386. Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.106-5-x86_64. Passed
Checking for libgcc-4.1.1-x86_64; found libgcc-4.1.2-54.el5-x86_64. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-54.el5-i386. Passed
Checking for libstdc++-4.1.1-x86_64; found libstdc++-4.1.2-54.el5-x86_64. Passed
Checking for libstdc++-4.1.1-i386; found libstdc++-4.1.2-54.el5-i386. Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.1.2-54.el5-x86_64. Passed
Checking for make-3.81; found make-1:3.81-3.el5-x86_64. Passed
Checking for sysstat-7.0.0; found sysstat-7.0.2-12.0.1.el5-x86_64. Passed
Check complete. The overall result of this check is: Passed
Check Name:Kernel
Check Description:This is a prerequisite condition to test whether the minimum required kernel parameters are configured.
Checking for VERSION=2.6.18; found VERSION=2.6.32-300.39.5.el5uek. Passed
Checking for hardnofiles=4096; found hardnofiles=131072. Passed
Checking for softnofiles=4096; found softnofiles=131072. Passed
Check complete. The overall result of this check is: Passed
Check Name:GLIBC
Check Description:This is a prerequisite condition to check whether the recommended glibc version is available on the system
Expected result: ATLEAST=2.5-12
Actual Result: 2.5-107
Check complete. The overall result of this check is: Passed
Check Name:TotalMemory
Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
Expected result: 1024MB
Actual Result: 5992MB
Check complete. The overall result of this check is: Passed
Check Name:Check Env Variable
Check Description:Check for LD_ASSUME_KERNEL
Expected result: LD_ASSUME_KERNEL environment variable should not be set in the environment.
Actual Result: Variable Not set.
Check complete. The overall result of this check is: Passed
Setting current page standalone validations to true
Setting current page standalone validations to true
In processErrorMsgStringDomain Name
In processErrorMsgStringValid domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters, and include at least one alphanumeric character.
In processErrorMsgStringAdministrator Password
In processErrorMsgStringValid passwords are 8 to 30 characters long, must begin with an alphabetic character,use only alphanumeric, underscore (_), dollar ($) or pound (#) characters and include at least one number.
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringThe value may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
resultset.getStatus() : true
Setting current page standalone validations to true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
In processErrorMsgStringDomain Home
In processErrorMsgStringOracle Instance
In processErrorMsgStringMiddleware Home
In processErrorMsgStringInstance Name
In [email protected]_invalidCharMsgString
Obtained the single page data..SpecifyHomeInformationPage
In processErrorMsgStringWebLogic Server Home
In processErrorMsgStringOracle Home
In processErrorMsgStringOracle Home Directory
In [email protected]_OracleDirectoryInvalidErrorString
Obtained the single page data..SpecifyHomeInformationPage
Entering the exec handler method in get free space for home...
quotaNeededProperty:null
isQuotaNeeded : false
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
resultset.getStatus() : true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
Setting current page standalone validations to true
OS: <LINUX> commad: </sbin/ifconfig -a> pattern: <inet(\s+.*:)?\s*\d+\.\d+\.\d+\.\d+>
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringBIPLATFORM schema user name
In processFieldStringBIPLATFORM schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : false
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting collector hub url in screen:null
In doFinish method checking for inventory lock...InstallProgressPage
Next page is a progress page and the inventory lock is false
Setting current page standalone validations to true
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
at java.lang.String.substring(String.java:1937)
at oracle.as.install.bi.util.InstallerInfo.getShiphomeLocation(InstallerInfo.java:58)
at oracle.as.install.bi.installaction.BIInstallAction.executeBeforeCopy(BIInstallAction.java:230)
at oracle.as.install.engine.modules.util.installaction.InstallActionProviderUtility.invokeExecuteBeforeCopy(InstallActionProviderUtility.java:72)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.startInstallOperation(ModifiedDWizard.java:3117)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doNext(ModifiedDWizard.java:788)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doNext(ModifiedDWizard.java:886)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doNext(ModifiedDWizard.java:934)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doFinish(ModifiedDWizard.java:611)
at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:6288)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6053)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4651)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4481)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4481)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:643)
at java.awt.EventQueue.access$000(EventQueue.java:84)
at java.awt.EventQueue$1.run(EventQueue.java:602)
at java.awt.EventQueue$1.run(EventQueue.java:600)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:616)
at java.awt.EventQueue$2.run(EventQueue.java:614)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:613)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
So far, I have confirmed I am using a 64-bit compliant java:
$> java -version:
java version "1.6.0_43"
Java(TM) SE Runtime Environment (build 1.6.0_43-b01)
Java HotSpot(TM) 64-Bit Server VM (build 20.14-b01, mixed mode)
There is nothing installed in this box except the Linux OS, one single Oracle DB for me to install OBIEE, no WebLogic, nothing else.
Any help will be appreciated!
Thanks,
NickWell, I redownloaded all five zip files for Linux 64 bit, and completely deleted my old bishiphome.
I then unzipped all five zip files into a brand new bishiphome, and retried the installation. This is still a Linux box with nothing on it but Linux, one Oracle 11gR2 database, rcu11.1.1.6, and attempting to install OBIEE 11.1.1.6.
Same result.
Still hangs at file copy, still has the same error message in the .out file.
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
at java.lang.String.substring(String.java:1937)
Any other ideas? This is getting really frustrating! -
Error while running the OBIA_RCU in Linux 64 bit OS
OSDear Friends,
I was Installing OBIA 11.1.1.7 on Linux 64 bit OS, while running the OBIA_RCU im facing the below mentioned Error related to ODI repository. The warehouse schemas were fine
Error message : rcu-6130 action failed rcu-6135 error while trying to execute java action
Please help as I need to complete the configuration soon
Regards,
Mcheck this
RCU Fails During Portal Configuration Assistant: RCU-6130 Action Failed RCU-6135 (Doc ID 1099572.1) -
Problem in OIM Installation in Linux-64 bit environment
Hi,
Components used
1. Oracle Database11gR1
2. Weblogic Application server 10.3.0(installed in non clustered mode)
3. OIM 9.1.0.1
Also ensured the above three are compatible.
I'm facing problem at the end of OIM installation in RedHat Linux-64 bit environment.
The error details in setup-weblogic.log file is given below
===================================
setup-startscript:
setup:
[echo] Setting up weblogic for xellerate complete.
[ant] Exiting /oracle/oimserver/xellerate/setup/weblogic-setup.xml.
BUILD FAILED
/oracle/oimserver/xellerate/setup/setup.xml:443: The following error occurred while executing this line:
/oracle/oimserver/xellerate/setup/weblogic-setup.xml:196: Could not create task or type of type: wlst.
Ant could not find the task or a class this task relies upon.
This is common and has a number of causes; the usual
solutions are to read the manual pages then download and
install needed JAR files, or fix the build file:
- You have misspelt 'wlst'.
Fix: check your spelling.
- The task needs an external JAR file to execute
and this is not found at the right place in the classpath.
Fix: check the documentation for dependencies.
Fix: declare the task.
- The task is an Ant optional task and the JAR file and/or libraries
implementing the functionality were not found at the time you
yourself built your installation of Ant from the Ant sources.
Fix: Look in the ANT_HOME/lib for the 'ant-' JAR corresponding to the
task and make sure it contains more than merely a META-INF/MANIFEST.MF.
If all it contains is the manifest, then rebuild Ant with the needed
libraries present in ${ant.home}/lib/optional/ , or alternatively,
download a pre-built release version from apache.org
- The build file was written for a later version of Ant
Fix: upgrade to at least the latest release version of Ant
- The task is not an Ant core or optional task
and needs to be declared using <taskdef>.
- You are attempting to use a task defined using
<presetdef> or <macrodef> but have spelt wrong or not
defined it at the point of use
Remember that for JAR files to be visible to Ant tasks implemented
in ANT_HOME/lib, the files must be in the same directory or on the
classpath
Please neither file bug reports on this problem, nor email the
Ant mailing lists, until all of these causes have been explored,
as this is not an Ant bug.
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:539)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:385)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at org.apache.tools.ant.Main.runBuild(Main.java:668)
at org.apache.tools.ant.Main.startAnt(Main.java:187)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
Caused by: /oracle/oimserver/xellerate/setup/weblogic-setup.xml:196: Could not create task or type of type: wlst.
Further, I have identified that the ant was unable to launch a custom web logic task, wlst.
This custom task of web logic task is invoked by ant using the following script in <OIM_HOME>/xellerate/setup/weblogic-setup.xml.
<target name="setup" depends="setup-startscript">
<echo>Setting up weblogic for xellerate complete.</echo>
<wlst properties="${basedir}/Profiles/${profile}" arguments='SETUP_CONFIG ${profile}
${weblogic_login_password} ${datasource_user_password} '
fileName="${basedir}/setup/oimconfig.py"
executeScriptBeforeFile="false"
failOnError="true">
</wlst>
<antcall target="stopServer"/>
<antcall target="startServer"/>
</target>
Also I have ensured the all the environmental variables, JAVAOPTIONS, USER_MEM_ARGS, ANT_OPTS are properly set before installing OIM.
I have tried several times but still getting the same error.
Please help me to resolve this issue.
Did anyone face this issue before??????
Edited by: Katheresh on May 17, 2010 9:36 PMI am not certain but when I was installing OIM 9.1.x with wls 10.3.0 on windows I had a failure too and it turned out I didn't create the wls domain user and group for OIM. The docs for OIM 9.1 does not talk about it so you may want to create this account and group and re-try the install. The steps are below:
Log in to the WebLogic Admin Console using your new account by pointing a web browser to the following url:
http://<hostname>:7001/console
1. Select Security, then Realms, then myrealm, and then Groups from the navigation panel on the left.
2. Select the Configure a new Group link in the Groups page.
3. Enter User for the group name in the Name field under the General tab and optionally enter a description for the group.Click Apply.
Note:
The group name User is case-sensitive.
4. Select Security, then Realms, then myrealm, and then Users from the navigation panel on the left.
5. Select the Configure a new User link in the Users page.
6. Enter Internal for the user name in the Name field under the General tab and optionally enter a description for the user.
Note:
The user name Internal is case-sensitive.
7. Enter and confirm a password associated with the user name Internal and click Apply.
8. Select the Groups tab.
9. Add the User group to the list of Current Groups for the Internal user by selecting User from the list of Possible Groups and clicking the --> right arrow button. Click Apply.
Please post back if it works,
Thanks, -
Error while starting DAC Server on Linux (32 bit)
Dear Friends,
I installed Informatica Powercenter 8.6.1 on Linux (32 bit) with 11g database mapping
and I installaed DAC Server on the same server
I could start the Informatica services successfully
but when i try to start the DAC Server it throws the following error:
#./startserver.sh
OS detected: Linux
Dec 23, 2010 5:49:33 AM com.siebel.etl.engine.core.ETLUtils logException
SEVERE:
ANOMALY INFO:::
An exception occurred. Shutting down server...
EXCEPTION CLASS::: java.lang.ExceptionInInitializerError
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
::: CAUSE :::
MESSAGE:::Application Manager Failed Initialization
EXCEPTION CLASS::: com.siebel.etl.bootup.ApplicationManagerInitializationException
com.siebel.etl.bootup.ApplicationManager.initFileSource(ApplicationManager.java:157)
com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:79)
com.siebel.etl.bootup.ApplicationManager.<clinit>(ApplicationManager.java:62)
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
::: CAUSE :::
MESSAGE:::/oba/BI/DAC/bifoundation/dac/conf/server.properties (No such file or directory)
EXCEPTION CLASS::: java.io.FileNotFoundException
java.io.FileInputStream.open(Native Method)
java.io.FileInputStream.<init>(FileInputStream.java:106)
java.io.FileInputStream.<init>(FileInputStream.java:66)
com.siebel.etl.bootup.ApplicationManager.initFileSource(ApplicationManager.java:151)
com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:79)
com.siebel.etl.bootup.ApplicationManager.<clinit>(ApplicationManager.java:62)
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
Dec 23, 2010 5:49:33 AM com.siebel.etl.net.QServer <init>
SEVERE:
Shutting down server...
what could be the Issue.
Regards,
DBListen Sheikh Abdullah, if u don't need remote access to that server over secure conn., don't use password file authentification but change REMOTE_LOGIN_PASSWORDFILE to NONE and when u conn thru OEM as sysdba try to change his pass and then try conn thru command promt(CP) usin that new pass.
Or recreate pass file adding new pass in it, set REMOTE_LOGIN_PASSWORDFILE to exclusive or shared and conn thru CP using password file pass.
Try this possible solutions in order u wish. -
Error installing OBIEE 11g on Linux 64 bits - Configuration Assistant fails
Hello,
I am trying to install OBISE1 on Oracle Linux 5 - 64 bits.
I've followed these steps:
1) Install Oracle DB
2) Install jdk Linux 64 bits (jdk1.7.0)
3) Install WebLogic
4) Install RCU
5) Install OBI 11g (Software only installation)
Until here, all is correct.
6) Configuration assistant failed:
[2011-09-12T12:04:58.844+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0]
[2011-09-12T12:04:58.845+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-09-12T12:04:58.846+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
I have fount posts with a similar problem, but is over Windows.
I appreciate any ide/suggestion.
Thank you in advance.
Regards,I have seen that WebLogic is shut down, so I am trying to start up, but I can't:
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Starting WLS with line:
/usr/java/jdk1.7.0/bin/java -jrockit -Xms512m -Xmx512m
-Dweblogic.Name=AdminServer
-Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
-Dweblogic.ProductionModeEnabled=true -da
-Dplatform.home=/root/Oracle/Middleware/wlserver_10.3
-Dwls.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/root/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/root/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
weblogic.Server
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
I have modified /etc/profile, including JAVA_HOME and PATH with the java PATH. And it is ok, because if I executed java -version I can see the new jdk:
java version "1.7.0"
Java(TM) SE Runtime Environment (build 1.7.0-b147)
Java HotSpot(TM) 64-Bit Server VM (build 21.0-b17, mixed mode)
Any idea¿? -
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode1344675 wrote:
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode
Why is your "requirement" to install in graphical mode? Once you are past the installation itself, the only thing that buys you is that your server will have been configured to boot up to runlevel 5, running a graphical desktop (gnome or kde, I forget which). And what does THAT buy you on a server?
I do not run ANY of my Linux servers "in graphical mode" -- running a graphical desktop. Nor did I run a graphical desktop when I had Solaris, AIX, or HP-UX servers. -
Upgrade from 10G windows 32-bit to 11G linux 64-bit
Hi,
I am moving a 10g database on windows 32-bit environment to 11G linux 64-bit environment. I am using rman to restore the database on the new environment. The restore completes successfully after which when I open the database in upgrade mode and run utlirp.sql in order to migrate it from 32-bit to 64-bit I encounter the following error:
create or replace package STANDARD AUTHID CURRENT_USER is -- careful on this line; SED edit occurs!
/********** Types and subtypes, do not reorder **********/
type BOOLEAN is (FALSE, TRUE);
type DATE is DATE_BASE;
type NUMBER is NUMBER_BASE;
subtype FLOAT is NUMBER; -- NUMBER(126)
-- to your own code as it may in future interfere with the package
-- consistency maintenance mechanisms and could have dire results.
--#### timestamp pragma (please keep this last)
pragma TIMESTAMP('2006-04-18:00:00:00');
end;
create or replace
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-00942: table or view does not exist
Thanks in advance for your help.According to
ID 757245.1 Can you Upgrade RDBMS and Convert From 32-bit to 64-bit Binaries Directly on Linux or Windows based Intel Platforms Using the Database Upgrade Assistant (DBUA)oracle does not support upgrading and changing the wordsize at the same time. A workaround is to upgrade it on the same platform and then move it to the new oS and change wordisize.
Ioan
Edited by: ioan on 15.1.2010 3:32 -
How to install e business suite on linux 32 bit?
Hi All,
Can any body direct me how to install e business suite on linux 32 bit env.
Thanks.LAVANKV wrote:
Hi All,
Can any body direct me how to install e business suite on linux 32 bit env.
Thanks.Interesting Documents Concerning E-Business Suite 11i to R12 Upgrades [ID 850008.1]
Oracle E-Business Suite Installation Guide Using Rapid Install
http://docs.oracle.com/cd/E18727_01/doc.121/e12842/toc.htm
Thanks,
Hussein -
Migration from HP-UX to Linux 64 bit on SAP XI 3.0 environment
Hi All,
Can you please provide the requirements steps/documents for migration from HP-UX to Linux 64 bit on SAP XI 3.0 environment
Thanks
SateeshHi Sateesh,
This migration which you refer here is a heterogenous system copy. you may refer the system copy guide for the same.
you can get the system copy guide from the below link
Database and Operating Systems - System Copy [original link is broken]
Also refer the SMP link
http://service.sap.com/osdbmigration
The migration should only be performed by SAP certified OS/DB migration consultant.
Regards,
Chandru -
Error on Install BI 11.1.5 on Linux 64 bit
On my Linux 64 bit (Centos 5.6), with Oracle DB 11gR2 on the same machine, the Install of BI 11.1.5 fail
creating AsInstance' failed
The log
[2011-05-10T18:43:17.365+02:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 34] [ecid: 0000IzQl9YxFw000jzwkno1DmMQ400000P,0] [[
oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-05-10T18:43:17.368+02:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 34] [ecid: 0000IzQl9YxFw000jzwkno1DmMQ400000P,0] Exit code from OPMNAdmin : 2
[2011-05-10T18:43:17.368+02:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 34] [ecid: 0000IzQl9YxFw000jzwkno1DmMQ400000P,0] [[
oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance instance1.
Cause:
An internal operation has failed: Error in starting opmn server
Operation aborted because of a system call failure or internal error
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
... 18 more
Caused by: oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
... 19 more
Thanks for any help, RobertoThanks a lot for the help.
+Installing OBIEE 11g On Linux 64-bit Fails Running The Configuration Assistant With "Step Creating Asinstance Failed" [ID 1304640.1]+
I check for the library libaio, and it's all ok on my system.
+Error: "Oracle.as.provisioning.util.ConfigException: Error While Starting the Domain." Whilst Installing OBIEE 11G [ID 1272906.1]+
I check on my DNS server, and seem have some problem.
So, i try with IP static, and works !
Roberto -
Hi,
Does anyone know how do I connect from Oracle 11g 11.1.0.7 on LINUX 64-bit machines to SQL Server 2000 DB please so I can set up a regular data extraction job to migrate data? Does this use products I am already licenced for under Oracle Enterprise Edition?
Thanks,
Jeremyyou must be not read it carefully.
The gateway software is there, in the bottom.
Oracle Database Gateways 11g Release 1 (11.1.0.6.0)
for Linux x86-64
linux.x64_11gR1_gateways.zip (505,401,641 bytes) (cksum - 2593459988) just download it.
and this is how to install and configure
http://download.oracle.com/docs/cd/B28359_01/gateways.111/b31042/partsql.htm#BJEGEBFH -
Obiee 11.1.1.5.0 certifcation with LINUX-64 bit
Hi All,
Is
OBIEE 11.1.1.5.0 (Linux 64 bit) certfied on Database : Oracle 11.2.0.2 ( Linux 64 bit).
if Certified . Kindly let me know which software installtion need to be done like Simple, Enterpries or software only....
Weblogic is 1035
Java is : java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01, mixed mode)
ThanksHi,
Check the certification matrix here,
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls
Rgds,
Dpka -
Starting OBIEE 11g on Linux 64 bit
Hi,
I installed OBIEE 11g on Linux 64 bit and it worked fine after installation. I rebooted the system and I need to start it again.
I am trying to run
run-sa.sh
run-saw.sh
etc.
but it looks like the scripts are broken:
./run-saw.sh: line 43: syntax error near unexpected token `('
./run-saw.sh: line 43: `ANA_INSTALL_DIR=$N($P(installLocation))'
it looks like these scripts were not processed by the installer during installation, $N($P(installLocation)) should have been replaced by the installer with actual paths I assume.
is there another way to start OBIEE?
Thanks,
CalinAre you sure you are running OBIEE 11g? YOu are meant to use those scripts any more in 11g. See this post:
Startup Scripts for OBIEE 11g on Linux
Maybe you are looking for
-
Error messege- Please enter a valid date in Background Job
Hi all, background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009. But before 31.12.2008 it was working fine error messege- This is happening in Production and developement client. While running the report it showin
-
How can i display collection of records in HTML Table using DWR framework
Dear All, Just i start using the Direct Web Remoting framework.I am worrying to get the list of records to display html table using this concept.I did the same like. index.js var cellFuncs = [ function(data) { return data; }, function(data) { return
-
Issue with Illustrator CC, please help
Hi everyone, I've been experiencing something weird in Illustrator CC for a while now. It became unusable. What I've done : Reinstall Illustrator CC Remove Preferences in the /Users/ folder Remove all files with the Adobe Cleaner Tool Reset PRAM Manu
-
I am trying to run the combine feature at Acrobat XI Pro (Win 7 64-bit), Starting to add file to the combine window the program crash !!! Need urgent help
-
Time Delay Live Video Output?
Thanks in advance for any assistance you can offer. I have an artist friend who would like to set up a video feed in a gallery. The video camera would shoot one section of the installation. In a seperate room, a projector would present that live feed