Kernel SMP Devel Package for OEL 4,7

Hi,
Can someone point me the location/url from where I can download the below package :
kernel-smp-devel-2.6.9-78.0.13.0.1.EL.x86_64.rpm
I am looking for this specfic package for kernel version 2.6.9-78.0.13.0.1.
Thanks and Regards
Anoop

Hi,
Actually I open the http://public-yum.oracle.com/ in IE and went to the location mentioned in :
http://public-yum.oracle.com/public-yum-el4.repo
But could't find it there, actually repository still has old kernel kernel-smp-devel-2.6.9-78.0.0.0.1.EL.x86_64.rpm.
But I need the kernel - kernel-smp-devel-2.6.9-78.0.13.0.1.EL.x86_64.rpm
Please let me know, if anyone has any idea.
- Anoop

Similar Messages

How would I create kernel devel package for OVM3.2.1 ?

I am new to OVM SDK ..Please help me to understand how to create kernel devel package for OVM3.2.1 ?
I tried below command "rpmbuild --rebuild kernel-uek...src.rpm" on my OEL5.9 machine. It throw few errors w.r.t KaBI checks fails.
Is there hard rule to run above command only on OVM 3.2.1 SDK template ? I am going to try that now, but it will be good to know limitation/assumption on OVM 3.2.1.
Is there any simplest method to get kernel devels/headers for OVM3.2.1 ?

Thanks JB. It works like a charm. I earlier doubt the same, but real pain was to get gcc,rpm utils without ULN access. I used oel5_latest repo to get gcc and other supported utils. Everything works as expected.
Just for info to help others... Below are the list of package required.
yum install gcc.x86_64 --skip-broken
yum install make.x86_64 --skip-broken
yum install rpm-build.x86_64--skip-broken
yum install make.x86_64 --skip-broken
yum install redhat-rpm-config --skip-broken
yum install m4 --skip-broken
yum install elfutils.x86_64 --skip-broken
yum install gnupg --skip-broken
Below are final RPMs generated using rpmbuild --rebuild <kernel-source>.rpm
kernel-uek-debuginfo-2.6.39-300.22.2uek.x86_64.rpm
kernel-uek-debuginfo-common-2.6.39-300.22.2uek.x86_64.rpm
kernel-uek-2.6.39-300.22.2uek.x86_64.rpm
kernel-uek-devel-2.6.39-300.22.2uek.x86_64.rpm
kernel-uek-debug-2.6.39-300.22.2uek.x86_64.rpm
kernel-uek-headers-2.6.39-300.22.2uek.x86_64.rpm
kernel-uek-debug-debuginfo-2.6.39-300.22.2uek.x86_64.rpm
kernel-uek-debug-devel-2.6.39-300.22.2uek.x86_64.rpm

ULN oracle-validated, Note 761566.1 and database packages for OEL 5.5

I purchased the ULN to simiplify installing the packages for an Oracle E-Business installation. I'm assuming the oracle-validated is not for E-Business installation because there were several required packages from note 761566.1 that were not installed The note also has a list of 11.1.0.7 required packages. Not all of these were installed with the oracle-validated update either. Maybe i'm not doing it correctly?
If so, how do you use the oracle-validated to apply all the required packages. What channels do I subscribe to for the oracle-validated to work correctly.
I am on OEL 5.5
I am subscribed to two channels the latest for 5.5 and 5.5 x64 per a previous thread.
Packages listed in note 761566.1 that I'm having trouble with:
There are 3 parts to the package installation section.
1. You have to go to http://oss.oracle.com/projects/compat-oracle/files/Enterprise_Linux to get a couple packages not on the OEL installation disk. Are these also on the ULN update someplace?
•openmotif21-2.1.30-11.EL5.i3861
•xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386
2. A list of packages for release 5 and up
There were more than this not updated from oracle-validated from the ULN but these are the trouble ones:
This is on the list of required:
•glibc-2.5-18.i686 (32-bit)
•glibc-2.5-18.x86_64
•glibc-common-2.5-18.x86_64
•glibc-devel-2.5-18.i386 (32-bit)
•glibc-devel-2.5-18.x86_64
This is what is on the server after ULN update
glibc-2.5-49.el5_5.7 (i686)
glibc-2.5-49.el5_5.7 (x86_64)
glibc-common-2.5-49 (x86_64)
glibc-devel-2.5-49.el5_5.7 (i386)
glibc-headers-2.5-49.el5_5.7 (i386)
Is glibc-2.5-49.el5_5.7 (i686) a newer version of •glibc-2.5-18.i686 (32-bit) ? if so, then where do I get the same version that is synonymous with •glibc-devel-2.5-18.x86_64 ?
If i try to apply •glibc-devel-2.5-18.x86_64 I get stuck in a loop.
This is what is on the 5.5 linux disk:.
glibc-2.5-49.i686.rpm
glibc-devel-2.5-49.i386.rpm
glibc-2.5-49.x86_64.rpm
glibc-common-2.5-49.x86_64.rpm
glibc-devel-2.5-49.x86_64.rpm
glibc-utils-2.5-49.x86_64.rpm
glibc-headers-2.5-49.x86_64.rpm
3. Additionally, the following RPMs are required for an 11gR1
I would have thought at least these packages would have installed from the oracle-validated update, but they weren't. Maybe I'm doing it wrong.
The following are listed in the note to be installed: I get stuck in a loop with this one too. What do I do about this?
•elfutils-libelf-devel-0.125-3.el5.x86_64
•elfutils-libelf-devel-static-0.125-3.el5.x86_64
What is installed is
elfutils-libelf-devel-0.137-3.el5 (i386)
elfutils-libelf-devel-static-0.137-3.el5 (i386)
# rpm -ivh elfutils-libelf-devel-0.137-3.el5.x86_64.rpm
error: Failed dependencies:
elfutils-libelf-devel-static-x86_64 = 0.137-3.el5 is needed by elfutils-libelf-devel-0.137-3.el5.x86_64
# rpm -ivh elfutils-libelf-devel-static-0.137-3.el5.x86_64.rpm
error: Failed dependencies:
elfutils-libelf-devel-x86_64 = 0.137-3.el5 is needed by elfutils-libelf-devel-static-0.137-3.el5.x86_6
This is what is on the 5.5 disk:
elfutils-libelf-devel-0.137-3.el5.x86_64.rpm
elfutils-libelf-devel-static-0.137-3.el5.i386.rpm
elfutils-libelf-0.137-3.el5.x86_64.rpm
elfutils-libelf-devel-0.137-3.el5.i386.rpm
elfutils-libelf-0.137-3.el5.i386.rpm
elfutils-libelf-devel-static-0.137-3.el5.x86_64.rpm
Edited by: jarymo on Jan 28, 2011 7:29 AM

Now I really need glibc-devel-2.5-18.x86_64. My installation failed with the following which is what started this quest for what is missing in the first place.
.end std out.
sqlplus: error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: No such file or directory
egrep: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_vicr410/adcrdb_VIS.txt: No such file or directory
This failed on the database portion of the installation. ibclntsh.so.11.1 sh
From DOC: 786995.1 Troubleshooting The Relink Errors When Missing RPMs on Linux x86-64
Error :-
/usr/bin/ld: cannot find /usr/lib64/libpthread_nonshared.a
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.11.1
Affected Version :-
11.1 RHEL5(x86-64)
RPM missing :-
glibc-devel (64-bit)
ApplyDatabase_01281418.log
This is on the list of required:
•glibc-2.5-18.i686 (32-bit)
•glibc-2.5-18.x86_64
•glibc-common-2.5-18.x86_64
•glibc-devel-2.5-18.i386 (32-bit)
•glibc-devel-2.5-18.x86_64
This is what is on the server after ULN update
glibc-2.5-49.el5_5.7 (i686)
glibc-2.5-49.el5_5.7 (x86_64)
glibc-common-2.5-49 (x86_64)
glibc-devel-2.5-49.el5_5.7 (i386)
glibc-headers-2.5-49.el5_5.7 (i386)
Is glibc-2.5-49.el5_5.7 (i686) a newer version of •glibc-2.5-18.i686 (32-bit) ? if so, then where do I get the same version that is synonymous with •glibc-devel-2.5-18.x86_64 so I don't have to remove all the UNL updates and apply what is on the installation disk?

AIDE (Tripwire equivalent) package for OEL 4

Hello everyone,
Where can I get an AIDE package for our Oracle Enterprise Linux 4? AIDE is the open-source equivalent of Tripwire.
I could compile from source but if there's a package it will easier :)
Thanks!
Jorge

I found aide package in EL5(aide-0.12-7.i386.rpm) and EL5U1(aide-0.13.1-2.0.4.el5.i386.rpm). and did not find it in EL4. :(

Oracle Linux 6.1 asm packages - oracleasm and oracleasmlib for OEL 6.1 ???

Hello everyone
I am not ULN subscriber, I am trying to learn Oracle ASM/RAC at work.
I am running OEL 6.1 (uname -rm output is: 2.6.32-100.34.1.el6uek.x86_64)
I am looking for two ASM support libraries which are compatible with above Oracle Linux 6.1 X64
Specifically this article refers to 2 packages I need for ASM support:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
•oracleasmlib-2.0.4-1.el5.x86_64.rpm -- I need this one
•oracleasm-support-2.1.3-1.el5.x86_64.rpm -- this package is now already installed on OEL 6.1 so I dont need this one for OEL 6.1
•oracleasm-2.6.18-164.el5-2.0.5-1.el5.x86_64.rpm -- I need this one
Can anyone direct me to a download link for the above two packages? Even if its from RHEL6.1 as long as it works?
Or does it mean that I must pay Oracle in order to be able to get these packages in order to learn ASM at home ??
Why would Oracle allow us to use their RDBMS/RAC/ASM/Linux software at home learning for free and not supply the above two packages??
thanks

user6029797 wrote:
•oracleasmlib-2.0.4-1.el5.x86_64.rpm -- I need this oneThis requires Oracle Linux support, as it is not GPL software and is only available to subscribers.
•oracleasm-2.6.18-164.el5-2.0.5-1.el5.x86_64.rpm -- I need this oneNo, you don't. This is built into the kernel for OL6U1.
Or does it mean that I must pay Oracle in order to be able to get these packages in order to learn ASM at home ??
Why would Oracle allow us to use their RDBMS/RAC/ASM/Linux software at home learning for free and not supply the above two packages??If you want to use ASM for free, install Oracle Linux 5 Update 7 and download the RHEL5 oracleasmlib package from here:
http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html
Keep in mind that Database is NOT certified on Oracle Linux 6 anyway, so it is challenging to install. The very article you link to uses Oracle Linux 5. It also links to these very same RPMs. If you follow the article more carefully, you won't have any issues.

Unionfs and squashfs module packages for beyond kernel

It's nice to see a unionfs package for the latest beyond kernel has appeared - as it hadn't been included in the kernel package (beyond4-1).
Previous beyond kernels included the module.
It's puzzling to see a squashfs package for the latest beyond kernel, as this module is still supplied in the kernel package.
Could someone please clarify the situation ... what is actually intended?
iphitus? phrakture?

yeah, i accidentally left it out, a file management error.
beyond4.1 has it, and ought to hit the repos tonight. we'll clear squashfs up too.

Glibc error when installing OEL 5.8 packages for 10g install

Hi, I have the following errors occurring when installing the pre-requisite packages for a 10g install. I'm following the instructions on
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
file /usr/lib/gconv/libISOIR165.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/lib/gconv/libJIS.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/lib/gconv/libJISX0213.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/lib/gconv/libKSC.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/libexec/getconf/POSIX_V6_ILP32_OFF32 from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/libexec/getconf/POSIX_V6_ILP32_OFFBIG from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/sbin/iconvconfig from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
[root@oravm1 Server]# rpm -Uvh glibc-2.5-81.i86.rpm
I'm not sure what to do as the 10g install complains that the glibc package is not installed as a requirement for the db software install.

yum list glibcLoaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Installed Packages
glibc.i686 2.5-81.el5_8.1 installed
Available Packages
glibc.i386 2.5-81.el5_8.1 el5_latest
Should I really have the i686 version installed?
The 5.8 install includes the i686 version and the i386 version. Perhaps only the i386 version should have been installed. Am I right? If so should I remove the i686 version and how?
yum install glibcLoaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Setting up Install Process
Package glibc-2.5-81.el5_8.1.i686 already installed and latest version
Nothing to do
[root@oravm1 ~]#
Also.....
The install warned that the swap was not lareg enough, I recall something like 2.7GB when I have actually made it 2GB.
And the other things was ....
Checking for shmmax=536870912; found shmmax=33554432
The instructions I followed say nothing of setting this so high.
Edited by: ImiDataMan on Apr 11, 2012 4:49 PM

Help needed: making a psptoolchain package for arch

Hi....
I'm very new to archlinux (now using it for 3 weeks), but I really like it
Now I tried to make a archlinux package for the psptoolchain (PSP's are so nice )
I already got a working package for the psp-gcc and the psp-binutils (wrote my own PKGBUILD's) which came with the psptoolchain.
But now I got stuck with psp-newlib and pspsdk.
At the moment I'm building all the packages separately, but later I'll try to make one package for the whole psptoolchain....
So here comes my problem with psp-newlib and pspsdk...
psp-gcc -march=i686 -O2 -pipe -G0 -Wall -I../../src/base -I../../src/kernel -c sceAtrac3plus.S
sceAtrac3plus.S:0: error: bad value (i686) for -march
Assembler messages:
Error: Bad value (i686) for -march
make[3]: *** [sceAtrac3plus.o] Error 1
make[3]: Leaving directory `/mnt/data/archlinux/packages/psptoolchain/pspsdk/src/pspsdk/src/atrac3'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/mnt/data/archlinux/packages/psptoolchain/pspsdk/src/pspsdk/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/mnt/data/archlinux/packages/psptoolchain/pspsdk/src/pspsdk'
make: *** [all] Error 2
==> ERROR: Build Failed. Aborting...
And here comes my PKGBUILD for psp-newlib:
# Contributor: [email protected]
pkgname=newlib
pkgver=1.13.0
pkgrel=1
pkgdesc="GCC for psp-devel"
url="http://ps2dev.org/psp/Tools/Toolchain/"
depends=()
makedepends=()
source=(ftp://sources.redhat.com/pub/newlib/$pkgname-$pkgver.tar.gz)
md5sums=('3d07cc367a22b78c44227456b0d3b7dc')
build() {
export PSPDEV="/usr/local/pspdev"
export PATH="$PATH:$PSPDEV/bin"
cp $startdir/newlib-1.13.0.patch /$startdir/src/$pkgname-$pkgver
cd $startdir/src/$pkgname-$pkgver
cat newlib-1.13.0.patch | patch -p1
cd /$startdir/src/$pkgname-$pkgver
BUILDDIR="/tmp/pspdev" PSPDEV="/usr/local/pspdev" ./configure --prefix=/usr/local/pspdev --target=psp
make || return 1
make DESTDIR=$startdir/pkg install
I know, using newlib as pkgname is bad, but later I'll change it to psp-newlib and I'll replace the $pkgname's with newlib (I hope this idea isn't too bad)
One last thing: psp-binutils and psp-gcc are installed in "/usr/local/pspdev"
I hope you can help me
thanks, and have a nice day
XazZ

After a long break I decided to work on the PKGBUILD again.
Now I got two PKGBUILD's: one for the psptoolchain and one for pspsdk (pspsdk gets updated very often, so I decided to create an extra PKGBUILD).
I'm not sure if my PKGBUILD's fit the PKGBUILD-standard
First thing before I post my PKGBUILD's: I'm not finished with adding all required fields (as license and so on)!
Here comes the one for psptoolchain:
pkgname=psptoolchain
pkgver=2211
pkgrel=1
pkgdesc="A collection of tools to create executables for the Sony PSP"
url="http://ps2dev.org/psp/Tools/Toolchain/"
depends=('subversion' 'texinfo')
makedepends=()
license=('GPL')
source=(ftp://ftp.gnu.org/pub/gnu/binutils/binutils-2.16.1.tar.bz2 ftp://ftp.gnu.org/pub/gnu/gcc/gcc-4.0.2/gcc-4.0.2.tar.bz2 ftp://sources.redhat.com/pub/newlib/newlib-1.15.0.tar.gz)
md5sums=('6a9d529efb285071dad10e1f3d2b2967'
'a659b8388cac9db2b13e056e574ceeb0'
'4020004b1b7a56ca4cf7f6d35b40a4cb')
sha1sums=('5c80fd5657da47efc16a63fdd93ef7395319fbbf'
'f1b714c6398393d8f7f4ad5be933b462a95b075d'
'f6860b36e48fb831a30bab491230bbc7ce2669a2')
arch=('i686')
_svntrunk=svn://svn.pspdev.org/psp/trunk/psptoolchain
_svnmod=psptoolchain
_svntrunk1=svn://svn.pspdev.org/psp/trunk/pspsdk
_svnmod1=pspsdk
build() {
cd $startdir/src
svn co $_svntrunk $_svnmod
cd psptoolchain
cp binutils-2.16.1.patch $startdir/src/binutils-2.16.1/
cp gcc-4.0.2.patch $startdir/src/gcc-4.0.2/
cp newlib-1.15.0.patch $startdir/src/newlib-1.15.0
export PSPDEV="$startdir/pkg/usr/local/pspdev"
export PATH="$PATH:$PSPDEV/bin"
msg "patching and building binutils..."
cd $startdir/src/binutils-2.16.1
cat binutils-2.16.1.patch | patch -p1
./configure --prefix=/usr/local/pspdev --target=psp --enable-install-libbfd
make clean || return 1
make || return 1
make DESTDIR=$startdir/pkg install
msg "building and patching binutils finished"
msg ""
msg "patching and building gcc..."
cd $startdir/src/gcc-4.0.2
cat gcc-4.0.2.patch | patch -p1
mkdir objdir
cd $startdir/src/gcc-4.0.2/objdir
../configure --prefix=$startdir/pkg/usr/local/pspdev --target=psp --enable-languages="c" --with-newlib --without-headers
make || return 1
make DESTDIR=/ install
msg "building and patching gcc finished"
msg ""
msg "building pspsdk-headers - we'll only need them temporary"
cd $startdir/src/
svn co $_svntrunk1 $_svnmod1
cd $_svnmod1/
./bootstrap
./configure --prefix=/usr/local/pspdev -with-pspdev=/usr/local/pspdev
make clean || return 1
make DESTDIR=$startdir/pkg install-data
msg "building pspsdk-headers finished"
msg ""
msg "patching and building newlib-psp"
cd $startdir/src/newlib-1.15.0
cat newlib-1.15.0.patch | patch -p1
./configure --prefix=$startdir/pkg/usr/local/pspdev --target=psp
make || return 1
make DESTDIR=/ install
msg "building newlib-psp finished"
msg ""
msg "building gcc-c++"
cd $startdir/src/gcc-4.0.2
mkdir build-psp-c++
cd $startdir/src/gcc-4.0.2/build-psp-c++
../configure --prefix=$startdir/pkg/usr/local/pspdev --target=psp --enable-languages="c,c++" --with-newlib --enable-cxx-flags="-G0"
make clean || return 1
make CFLAGS_FOR_TARGET="-G0"
make || return 1
make DESTDIR=/ install
msg "building gcc-c++ finished"
msg ""
msg "removing unnecessary code"
cd $startdir/pkg/usr/local/pspdev/psp
rm -rf sdk
msg "Now you need to build and install pspsdk!"
And here the one for pspsdk:
pkgname=pspsdk
pkgver=2209
pkgrel=1
pkgdesc="A collection of Open Source tools and libraries written for the Sony Playstation Portable (PSP)."
url="http://ps2dev.org/psp/Tools/Toolchain/"
depends=('psptoolchain')
makedepends=()
arch=('i686')
license="custom"
_svntrunk=svn://svn.pspdev.org/psp/trunk/pspsdk
_svnmod=pspsdk
build() {
export PSPDEV="/usr/local/pspdev"
export PATH="$PATH:$PSPDEV/bin"
cd $startdir/src
svn co $_svntrunk $_svnmod
cd $_svnmod/
./bootstrap
./configure --prefix=/usr/local/pspdev -with-pspdev=/usr/local/pspdev
make clean || return 1
make DESTDIR=$startdir/pkg install-data
make clean || return 1
./configure --prefix=$startdir/pkg/usr/local/pspdev -with-pspdev=/usr/local/pspdev
make || return 1
make DESTDIR=$startdir/pkg install
Some explanation: I've used this one very often: --prefix=$startdir/pkg/usr/local/pspdev
Explanation: When I wanted to create only one PKGBUILD for the psptoolchain, some dependences were in $startdir/pkg. If you take --prefix=/usr/local/pspdev he won't get some depencies (mostly header files), which means I had to create single PKGBUILD's for every part of the psptoolchain (that would be 6 single parts).
Those --prefix-changes don't stop my psp environment from working! (tested it myself - I comiled almos all sample apps which were included in the pspsdk - and all compiled well)
I hope we can find a better solution than mine.
Thanks in advance
XazZ

RE:Packages for Oracle 10g Release 2 in RHEL4

Hi ,
I am installing Oracle 10.2.0.1 in RHEL4 ? (its my first time,for learning)
Where can i find packages for installing oracle 10.2.0.1 in lunix EL4?
Am sorry i searched but couldnt find exact and dont know whether its a correct one or not ?
plz provide me a link for downloading....
I have searched a lot but am bit confused, since am new to this...
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
TIA,

Hi Alit,
Thanks for reply...
Ok but here is am confused...
Plz see this ..
http://rpm.pbone.net/index.php3?stat=26&dist=42&size=10619423&name=binutils-2.15.92.0.2-10.EL4.src.rpm
TIA,

How to find a package for SAPLUP:700

Hello everyone,
I am creating new sandbox, and i have Windows server 2003 and sql server 2005.
I am doing it by system copy (import export)
While exporting it asks for SAPLUP:700. which SL controller but i am unable to find SL controller as per mentioned requirement can someone help me.

Hi Dharmendra,
You need the SL CONTROLLER 700 and probably also SL CONTROLLER 721 packages for SWPM SP06, in addition to the 721 kernel. You can obtain them from http://service.sap.com/swdc -> Installations and Upgrades -> Browse our Download Catalog -> SAP Technology Components -> SL TOOLSET -> SL TOOLSET 1.0 -> Kernel for installation/SWPM -> SAP KERNEL <version, e.g. 7.21 EXT 64-BIT UC> -> Installation -> Microsoft Windows. Download both 51048285_5 (SL CONTROLLER 700 for SWPM SP06) and 51048285_6 (SL CONTROLLER 721 for SWPM SP06). Note that the "Download Object" name (the 5104xxxx) may change, depending on which kernel version you are downloading, but the "Title" will remain the same.
Regards,
Matt

Business Package For Supplier in Netweaver Portal

Hi All,
I need your help to let me know what are the post installation activities to be performed after the installation of business package for supplier 4.0 ( SAP Netweaver Portal 7.3).
Can anybody provide me configuration document of Business package supplier 4.0 on SAP Netweaver Portal 7.3?
Thanks and Regards,
Snehal Raghoji

found this help on help sap site but it mention for portal 7.0 ,it will give you some idea ,may be you can ask SAP to provide the guide for 7.3 if its not available on SMP
Configuration Information for Supplier Collaboration 4.0 - Business Package for Supplier Collaboration 4.0 - SAP Library

How to check the dependency of Timesten Application version 11.2.1 for OEL 6U4

How to check the dependency of Timesten Application version 11.2.1 for OEL 6U4

Hi Chris,
THank for your reply.. My requirement is I am planning to upgrade my Server OS from OEL 5U8/5U3 servers to OEL 6U4. And we are using timesten application 11.2.1 version as of now. So wanted to check if the same version of TImesten can we install them on OEL 6U4 . if we can install it successfully what are the dependent RPM packages we need to consider for installing the timesten application and will there be any issues using the application? .
Is timesten 11.2.2 is the officially supported and stable version on OEL6U4?
And also can you suggest me if I want to check other applications dependency like rhino-2.3 and postgres 8.1.23 version how I need to check if this applications versions are certified to run on OEL 6U4.
IT would be great help if you can suggest me on this.
Naveen

Business Package for ECC6.0 EHP 4 Installation Guide

Hello Experts,
We have a reqt to install BP for ESS MSS compatible with ECC EHP 4 and identified below versions
BP ERP05 ESS 1.41
BP ERP05 MSS 1.41
BP ERP05 COMMON PARTS 1.41
BP ERP05 BUYER 1.41
BP ERP05 HR ADMINISTRATOR 1.11
....few others
Queries below -
1 - Link : [http://help.sap.com/erp2005_ehp_04/helpdata/EN/76/77594d165144a1a9bff9aae1e26b26/frameset.htm] under prerequisites : Business Packages are mentioned:
○       Business Package for Manager Self-Service (SAP ERP) 1.3
○       Business Package for Common Parts (SAP ERP) 1.3
○       Business Package for Project Self-Service (SAP ERP) 1.0
○       Business Package for HR Administrator (SAP ERP) 1.1
Should we upload the above BP before we deploy main packages like ESS 1.41, MSS 1.41 and HR Admin 1.11?
2 - We need to download and install BP from both paths - "installation and Upgrades" and "support packages and patches" in SMP one after the other?
3 - Installation sequence to be followed is PCUI_GP followed by Common Parts?
4 - I am unable to locate any proper installation guide for BP.
Thanks for your inputs,
Dhanz

Hi Dhanz
See the following guide for details
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0df0afb-44fb-2b10-46b1-c026264bcbc4
In order to calculate which SP packages to download from /swdc please see
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni
--->HOW TO GET RID OF SP STACK MISMATCH ISSUES
This tells you which BP or XSS packages work together and which back-end SP levels works with them
Good luck
Stuart

SAR for oel

Hi all,
I run the command "sar" and "mpstat" for oel but its command not found.
What is the counterpart of these commands please....
Thanks

KinsaKaUy? wrote:
I run the command "sar" and "mpstat" for oel but its command not found.Both sar and mpstat can be found in the sysstat package, so try this to install the package on Oracle Linux 5:
# up2date -u sysstat This requires your server to be registered with ULN. If you do not have a ULN subscription, follow the instructions at http://public-yum.oracle.com to configure yum first. Once you've configured yum, you can use:
# yum install sysstat This last command is also used for Oracle Linux 6 registered to ULN (as we use yum for ULN from OL6).

Creation of Add-on package for 64 bit and 32 bit SAP Business One Client

Please help me creating package for 64 bit and 32 bit SAP Business One. If Add-on executable is compiled with x86 option then there is no issue of connecting Add-on with 32 bit SAP Business one and if Add-on executable is compiled with Any CPU option then there is no issue of connecting Add-on with 64 bit SAP Business one. Problems are mentioned as below
1. My Add-on uses MS ACCESS connection and the connection is read using Jet OLEDB 4.0 provider. It works fine for x86 compile mode but not when compile mode is Any CPU. I searched for the issue on Google and found a solution to change MS ACCESS connection provider to ACE.OLEDB.12.0 but again ACE provider is installed according to the Office version i.e. 32 bit or 64 bit office suite. If I install 32 bit ACE provider then Add-on executable compiled with x86 version is working fine but with Any CPU option throws error as provider is not registered on current machine.
2. Secodly, our license validation activex dll is build using vb 6.0 and therefore when Add-on executable is compiled using Any CPU option, Add-on EXE cannot read from license dll. Any suggestion, how the activeX dll can be compiled whose component can be created from for X86 compiled exe and any cpu compiled exe.
Please help because we are stuck in this issue and cannot move forward.
Thanks.

Hi Alejandro,
That is one solution but did your add on used ms access connection? if you used Jet oledb to connection string or ace oledb connection string? what if 32 bit office is installed and what if 64 office is installed? how did you found the office version in install script? after determining the office version how did you installed Microsoft redistributable for ace oledb (32 bit or 64 bi )?
I am sorry that I asked many questions but these are the problems where I am stuck with the addon installer?
Thanks

Kernel SMP Devel Package for OEL 4,7

Similar Messages

Maybe you are looking for