Kernel Update from 7.00 to 7.01 - SAP Solution Manager EHP1

Can anyone give me some information about update sap kernel?
How must I proceed?
Thanks!

Login to service market place www.service.sap.com>downloads>supporpackages and patches>My company applicationsselect sap solution manager>SAP SOLUTION MANAGER 7.0 EHP 1>Entry by component>solution mangaer ABAP stack>select sap kernel 7.01 64 bit unicode-->select widows
server on X64bit>select database indendent>just scroll download you can see list of pathces select SAPEXE_23 which is the lates one and selet the check bot to add to download manager now select database dependant patch based on your database you have installed(Ex oracle or MS SQL)
select the same patch SAPEXEDB_23 and download the 2 patches through download manager
uncar the 2 patches throught sapcar command
sapcar -xvf <and give the patchnameSAPEXE......SAR>
sapcar -xvf <and give the patchnameSAPEXEDB......SAR>
Now take the backup of existing kernel
Drive:/usr/sap/SID/SYS/exe/uc
once the backup of kernel is finshed stops SAP and releated services
start>cmd>services.msc-->stop the service sap<SID_instance number> and saposcol service
now copy all the uncar newfiles to original run directory and replace all.If you face
problem like some service is still running then stop all the oracle services also and
try again.
Once all the files are copied then start the services and SAP
Let me know if needed more information
Regards
Uday

Similar Messages

Update from NWCE 7.1 SR5 to NWCE 7.11 EHP1 SP3

Hi,
I would like to update from NWCE 7.1 SR5 to NWCE 7.11 EHP1 SP3 using ceupdatemanager.exe. Is that possible?
The server is behind a proxy with authentication, is the update manager able to handle this? What are other possibilities?
Best regards,
Kevin

I've begun my upgrade of CE 7.1 SP6 to CE 7.11 SP3
I opened a Message with SAP and they suggested I use "SAP NetWeaver Composition Environment 7.1 ‒ Update to SP03
or Higher of SAP Enhancement Package 1"
Of course SAP recommends you use consulting to help with the install/upgrade.
Basically download the packages from service.sap.com and follow ceupdatemanager executions.
I've run into a road block, the server0 node after the Offline JSPM deployment will not startup again (Phase 3 of 5), the upgrade has failed because the engine didn't start back up after a boat load of time.
com.sap.engine.services.dc.api.deploy.EngineTimeoutException: [ERROR CODE DPL.DCAPI.1041] Deploy API could not retrieve the Result after 7200000 ms.
Possible reasons:
        1.J2EE Engine cannot start.
                Please check in Sap MMC or jcmon the engine status.
                        -If the server is stopped please check the server log files why the engine cannot start.
        2.Engine is up and running but deploy controller could not be looked up due to some Runtime exception.
                Please start telnet session to the SAP Application Server , check if the tcbldeploy_controller service is started.
Archive with all relevant logs and traces is created in /usr/sap/DOA/J23/j2ee/JSPM/log/errorReport.zip
JSPM version is 7.11.3.0.15. Current JSPM log directory is /usr/sap/DOA/J23/j2ee/JSPM/log/log_2009_10_17_19_49_38.
So This is what I'm going through to upgrade the system to CE 7.11 EHP1 SP3, let me know if you started or are thinking about it and if you uncovered any more information that could be usefull.
If the OSS message I opened for my problem doesn't come back soon, I'll post my problem on this forum maybe someone did this too.

SAP Solution Manager 7.0 Update into EHP1

Dear experts,
i'm planning to update a SAP Solution Manager SP15 into EHP1.
From the SAP Service Marketplace : service.sap.com/swdc, SAP Support Packages, Entry by Application Group, SAP Technology Components, SAP Solution Manager, SAP Solution Manager 7.0, SAP Stack: source stack (15), target stack (EHP1 SP21) THEN validate the download files from the Maintenance Optimizer. Finally download the files via Download Manager.
Before updating the SAP Solution Manager, i have to update the SPAM/SAINT Version + Kernel. I'm currently on Spam version 7.00/0026.
Just to be sure, my questions are :
Do i have to update my SPAM/SAINT version into 7.00/37 or into 7.01/37 before updating into EHP1?
Do i have to update the KERNEL version into 7.00 or into 7.01 before updating into EHP1?
Thank you for your help.
Regards,
Pascal.

Hi,
> Do i have to update my SPAM/SAINT version into 7.00/37 or into 7.01/37 before updating into EHP1?
SPAM/SAINT version 7.00/37
> Do i have to update the KERNEL version into 7.00 or into 7.01 before updating into EHP1?
>
This should be done, once upgrade will finish.
check SAP Note 1169247 - Additional info for Solution Manager 7.0 EHP1 update
Thanks
Sunny

Update SAP Solution Manager 7.0 to EHP 1 with SP 19

Hi!
We use SAP Solution Manager 7.0 (SP 17) on Linux with Oracle
and would like to update this system to EHP1 SP19.
First of all I installed ST-ETP Add-On via SAINT to call the system "Enteprise Edition"
Now I have few questions about the further procedure:
1) can this update from SP 17 --> SP 19 be implemented via SAINT and with one step?
2) what is the documentation of this process?
3) are there any restrictions about Linux and 32 Bit?
Thank you very much!
regards

check this Note #1276022, it contains all crucial information you will need

Message not updated in SAP Solution Manager

Hello SAP Solution Experts,
My requirement is to be able to send an incident message to SAP and when they in turn reply, the message in SAP Solution Manager is updated with the reply of SAP. The message could be for example a SAP NOTE number or some guidelines as message text.
But currently, this is not the case since we are not receiving any updates in the SAP Solution Manager. We need to consult the Marketplace to have access to the message of SAP.
So basically, as per my understanding, I think SAP is unable to update our Solution Manager system.
I would be grateful if someone could shed some light on how to make the replies of SAP available directly in our SAP Solution Manager?
Are there any steps to follow to achieve this requirement?
I am using the text schema ZLFN as follows:
Another issue, when the message is created and saved, we get the following warning message.
Translation in English would be: “No information text is available for SAP”.
Thanks and Kind Regards,
Yovish.

Dear Yovish,
Report 'AI_CRM_IM_UPDATE_FROM_SAP' is used to update incidents from SAP.
As alexander said, you can schedule the job 'REFRESH MESSAGE STATUS' using mentioned program on periodically(1 Hr).
This batch would update your solution manager system's incidents.
You can also do the status mapping to update your solman systems incident status by SAP status.
Thanks,
Vikas.

How to access SAP Solution Manager from webDynpro Application.

Hi to all,
I have to retrieve some informations from SAP Solution Manager. and update some recordes there itself. How could i do it??
If anybody have codes related to it please send the same.
Please help its urgent.
Waiting for reply.
Thanks and Regards;
Pankaj Kumar.

Hi
See this help
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/6e8c42c398173be10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/4c/758c42d781d665e10000000a155106/frameset.htm
Kind Regards
Mukesh

Launch CRM 7.0 from SAP Solution Manager

We are buiding the BPH in SAP Solution Manager and would like to store the CRM Business Processes in it as well. Therefore we'll also store the TCodes under the "Transaction" Tab.
Now, i understand that CRM 7.0 uses a web GUI for configuring TCodes. If we launch the TCode from SAP Solution Manager, does it launch a browser with the right IMG Object for the TCode? How does this work?
Anyone offer any suggestions/thoughts?
Thank you, in advance.

Dear Ramesh,
I'm pretty sure that it's possible to launch CRM web GUI components from Solution Manager. You can assign BSP Applications to process steps and launch them.
Most of the configuration in CRM 7.0 is still done via SAP GUI. I think it's only the UI view configuration that can be done in web GUI. However, if you find out which BSP application it is, you should be able to assign it to process steps in the configuration tab. It's done in the same way like assigning TCodes; just use type BSP_APPLICATION instead of BMTA.
Best regards
Jens

SAP Solution Manager SR1 with MSSQL on W2K3 IA32 - Problem with Kernel

Hello,
we are implementing a sandbox in order to test the SAP Solution Manager 4.0 SR1 with MSSQL on W2K3 IA32. Therefore we ordered the installation CD for the above mentioned configuration. Instead of getting the SAP NETWEAVER Kernel SR1 we got SR2. Now we have the problem, that the installation program SAPINST is requesting the SR1- Kernel.
Unforunately the SR1-Kernel seems no longer available in the download section.
It would be fine to get a suggestion how to solve the problem.
Thanks
Best regards
Ralf Richter ([email protected])

Hi Andreas,
thanks for the hint, I have already checked the LABEL.ASC. I have no LABEL.ASC-Key for the SAP Netweaver 2004s SR1, so it would be a possibilty to substitue this key. But neverhteless, I think, there should be another official procedure in order to use the SR2 instead of the old SR1. I have contacted Klaus Billing at SAP as recommended in the OSS Note 918078. Best regards. Ralf R.

1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

Where do i download SAP solution manager from?

Good day,
where do i download SAP solution manager from ? i tried using this link which was shown in some other websites , but it does'nt seem to work.
The link is :
http://service.sap.com/swdc -> Download -> Installations and Upgrades -> Entry by Application Group -> Installations and Upgrades -> SAP Technology Components -> SAP Support Enablement Package - >SAP Support Enabl. Package 1.0
Many thanks
Kripashankar.N

SEP is an additional package on top of Solman which must be licensed separately.
http://service.sap.com/swdc -> Download -> Installations and Upgrades -> Entry by Application Group -> Installations and Upgrades -> SAP Technology Components
That is the right path - if you don´t see SolMan you have to either contact your sales person so that you get an installation number or create a call at XX-SER-CONTR and ask for an installation number for SolMan and the download permissions.
Markus

SAP SOLUTION MANAGER 7.0 EHP 1 - need to update the stack?

I'm trying to understand the enhancement pack concept and what I need to do to update our solution manager.
currently we are on:
SAP SOLUTION MANAGER 7.0 EHP 1 - Stack 21
ST-ICO 150_700: patch 0022
CPRXRPM 400: patch 0015
CRMUIF 500: patch 0003
PI_BASIS Support Package 04 for 7.01
BI_CONT 704: Support Package 04
ABA Support Package 04 for 7.01
Basis Support Package 04 for 7.01
ST 400: Patch 0021, CRT for SAPKU50015
ST-SER 701_2008_2: patch 0005
ST-PI 2008_1_700: SP 0001
SAP_AP 700: Support Package 0016
Support Package 15 for SAP CRM 5.0
BW Support Package 04 for 7.01
I understand the current stack is 24. Is this also EHP 1 ?
I believe I need to update to stack 24 in order to stay current. Is that correct?
In addition, EarlyWatch indicates that the ST-A/PI is missing. Actually it exists but is not the current package. I believe by updating the stack, the ST-A/PI will also be updated. Is this correct?
Should I update the stack to 24? or just update the ST-A/PI?
Thanks
Laurie McGinley

Hi,
>
> I understand the current stack is 24. Is this also EHP 1 ?
>
Yes, check SAP note 1244225.
> I believe I need to update to stack 24 in order to stay current. Is that correct?
>
Yes
> In addition, EarlyWatch indicates that the ST-A/PI is missing. Actually it exists but is not the current package. I believe by >updating the stack, the ST-A/PI will also be updated. Is this correct?
>
Yes. Current support package for ST-A/PI is ST-A/PI 01M_CRM570.
> Should I update the stack to 24? or just update the ST-A/PI?
SAP always suggest to be on current support package. But I always prefer to upgrade to n-1 strategy.
Thanks
Sunny

How to Transfer Customizing Data from SAP ECC6 to SAP Solution Manager

Hi all,
I want to Transfer Customizing Data (such as organization structure) from SAP ECC6 to SAP Solution Manager.Please tell me how. Thanks.

Hi,
The system cannot capture the customizing data from your ECC6. This is another myth with SAP Solution Manager. Solution Manager can only smoothen the process of your Project Management.
Hope this solves your problem.
Feel free to revert back.
--Ragu

Accessing Document URL in SAP Solution Manager from SAP R/3 using BAPI

I want to access the hyperlink corresponding to a document present in Solution Manager from another system (i.e SAP R/3). The hyperlink can be generated manually by clicking on the button "Generate" present in Solution Manager. Can anyone please help me advising any BAPI to generate this hyperlink, or any standard function module for generated such a hyperlink used in Solution Manager so that I can define a custom BAPI.
Thanks in advance!

Hi Alvaro Hernán Rojas R ,
The product line is the hierarchy of the finished goods.
It is pertinent that the finished goods has emerged due to some process(es) carried on the raw material.
Thus logically you should map in solution manager based on the process only.
The macro process while depicts the processes at the highest level.The Business scenarios, Business Process gives a good idea about how you should go about configuring.The Steps/activities helps you to map in to SAP thro' T/Codes.
From the point of view of all of the below three,namely,
Easy configuration activities
Easy design of Unit and integration test
Easy activities of Process enhancement and optimization,
the option Map the process as ISO Standards
- Several projects : For each product line,will be most ideal.
It is the processes that drives the activities.The control activities like internal control etc are all process based.Given these,divorcing the business process from the configuration -as in -is certainly not a good practice.
Hope this helps.
Regards,
Ramesh

Error while upgrading to Solution Manager EHP1 from 3.2

Hi All,
I am trying to upgrade the solution manager3.2 to EHP1.
OS: Linux RHEL 4
DB: Oracle 10.2.0.2
I am in the Prepare phase.....
When I try to run the JPREPARE command( /dump/smrtest/SMR_UP/51036444/JPREPARE) I get the following error message
An unrecoverable error has occured:
Could not execute dialog SelectModulDialog. See previous messages.
Input output exception while processing dialog SelectModulDialog. See previous messages.
Could not send dialog message. See previous messages.
Could not bind to port 6240.
java.net.BindException: Address already in use
Can anyone help asap?

> I am in the Prepare phase.....
> When I try to run the JPREPARE command( /dump/smrtest/SMR_UP/51036444/JPREPARE) I get the following error message
You have a Java instance installed on 3.2?
> An unrecoverable error has occured:
>
> Could not execute dialog SelectModulDialog. See previous messages.
> Input output exception while processing dialog SelectModulDialog. See previous messages.
> Could not send dialog message. See previous messages.
> Could not bind to port 6240.
> java.net.BindException: Address already in use
Read the documentation about SAPJup - you have to change the default port (because most likely your ABAP part uses that one).
Markus

Create OSS user from SAP Solution Manager

Hi all,
as VAR, a customer ask us to create a OSS user to him because ir has no access to his customer data/area in Marketplace. SAP tell us that we have to create the OSS user directly in our SSM but I didn't found any way to do that in SSM.
Someone has done that this already? can anone guide me in this task?
thanks in advance
Pedro Rodrigues

Hi Pedro,
You have transaction code AISUSER
Normally you have 2 columns but if you are in var scen then you wil have 3 columns.
in this transaction you can have your Customer no,UserID & S-User (without "S000")
for the respective person
You can goto spro->scen specific->std config->Solution Manager->Connection to SAP-> multiple sap customer no
just perform this activity for VAR scen...read the IMG Text
Also
Asssign S-user for SAP Support Functionality
Hope it clarifies your doubt.
Regards
Prakhar

Kernel Update from 7.00 to 7.01 - SAP Solution Manager EHP1

Similar Messages

Maybe you are looking for