Kernel upgrade → "unable to reset IRR for apic"
Hi,
I just upgraded to 3.2.1, and at boot I now have 256 error messages:
Unable to reset IRR for apic:2, pin:{n} (with {n} from 0 to 255)
It still boots, but takes a bit more time.
I wasn't able to find anything about it (except a patch I don't understand). Am I the only one?
Is it important?
Thanks !
Olivier
Happens here as well, and I got the same messages during shutdown.
More info and ongoing troubleshooting to be found in this thread...
Last edited by Tekrotzen (2012-01-27 11:18:22)
Similar Messages
-
Kernel Panic: Unable to find driver for this platform
So, my 1 GM RM, 1.5 GHz Powerbook G4 (15 inches) has been behaving wonderfully lately. Until, this morning, it locked up -- as it sometimes does -- after inserting a 3rd party SATA card and waking it from sleep.
This is normally not a problem. A reboot gets things back on track. Not today. The reboot stayed on the grey screen with the white apple logo. I tried booting off of a Disk Warrior CD and an OS X 10.4 install DVD. I go this kernel panic:
Unable to find driver for this platform: "PowerBook5,6".
But...and here's the best part...if I boot into target disk mode and hook the computer up to another similar Powerbook we have, the similar PowerBook boots fine using my drive.
So, it seems to be a hardware problem with my PowerBook. Any ideas on how I narrow it down?
Thanks,
GaryGlad you found your problem. Our kernel panic on our 15" G4 is a bad logic board. $500+ to fix it. Just found out yesterday.
JWTech -
Unable to reset sample for the equipment task list.
Unable to reset sample for the equipment task list. Example: Equipment task list has been created on 01.10.2007 & inspection lot is created on 10.12.2007 which requires the changed in the inspection characteristics
Hi Sandeep,
You may change the Inspection charecterstucs and save the Task List.
After that u have to reassign that task list to the Lot. for that Trasaction code is QAC3 give the lot no. and enter
, without doing anything save it. now go to QA02 and reassign the task list and sampling procedure. and save it.
Now u may do RR as per ur new charecterstics.
Regards,
Neeraj Bhadauria -
I have had some Xsan issues and one of my volumes kept failing. I did a complete hard reboot of the entire system after trying all the cvfsck options. Now the volume seems to be ok but I am now getting the following errors and can not figure out what they are. Any help to a new Admin would be greatly appreciated.
5/7/12 1:59:13.000 PM kernel: add_fsevent: unabled to get a path for vp 0xb129000. dropping the event.
5/7/12 1:59:15.000 PM kernel: add_fsevent: unable to get path for vp 0xb12a4d0 (live.0.indexHead; ret 22; type 4)
5/7/12 1:59:15.000 PM kernel: add_fsevent: unabled to get a path for vp 0xb12a4d0. dropping the event.
5/7/12 1:59:15.000 PM kernel: add_fsevent: unable to get path for vp 0xb129de0 (live.1.indexHead; ret 22; type 4)
5/7/12 1:59:15.000 PM kernel: add_fsevent: unabled to get a path for vp 0xb129de0. dropping the event.
5/7/12 1:59:15.000 PM kernel: add_fsevent: unable to get path for vp 0xe3964d0 (live.2.indexHead; ret 22; type 4)
5/7/12 1:59:15.000 PM kernel: add_fsevent: unabled to get a path for vp 0xe3964d0. dropping the event.
5/7/12 2:01:22.024 PM mdworker32: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
5/7/12 2:01:22.525 PM com.apple.mdworker.pool.0: PSSniffer error: Invalid argument
5/7/12 2:01:24.697 PM mdworker: FontImporter: Validation failed - "/Volumes/Matilda/Dexter/Randy project - Burke update/James E Burke Awards video revision/Past Video files/ETH742/tricyclestudios (After FX) Jeremy/Assets/FUTURA_4.TTF".
5/7/12 2:01:24.697 PM mdworker: FontImporter: Validation Result - "(
kATSFontTestSeverityFatalError
Then I got a few more of the errors like the top lines.
Please help!!
Thanks,
Kevin RosenthalTurns out there were disk issues that I repaired by rebooting into Lion Recovery Mode (restart, hold Command-R during startup) and running Disk Utility. Disk Utility reported:
Volume bitmap needs minor repair for orphaned blocks
Invalid volume free block count
It fixed both problems and the drive then verified clean.
While I was there, I also repaired permissions, though I doubt that the permission oddities were the cause of the errors.
After rebooting into normal Lion, two things happend:
Time Machine quite happily went back to work and took a backup, no issue. Several hourlies have run since then, no problems.
Spotlight did some re-indexing. This caused some hangs (spinning beachballs) at first, but it self-cleared. It definitely didn't last long enough to re-index the entire drive; I'm guessing that it needed to re-index some of the repaired sections.
So far as I know, no files were corrupted -- but the drive is about 80% free space, so odds are that the orphaned blocks were not in a critical area. -
Macbook 4,1
Early 2008 15" macbook pro
Running Snow Leopard
the Battery was not working after only 23 cycles
I tried the Battery update and now it will not boot at all
I really do not want to loose my data on the drive
panic message is
Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Please helpPanic Message
panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
"ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Debugger called: <panic>
Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
(7 lines of hex)
BSD Process name corresponding to current thread: Unkonwn
Kernel version:
Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
I tried to boot from CD can, but i dont want to loose any information.
Tried disk tools
Hardware test
Tried to check if it was memory sticks failing or battery , nothing else plugged in
if i boot holding Apple key and S
I get additional warnings about AppleACPIPlatform and not being able to load Kext -
Unable to reset password for AppleID associated with iCloud
For the last week or so I haven't been able to access my iCloud on my iPhone, because it keeps saying that the password for my AppleID is incorrect. I've tried resetting the password on several occasions, but I can only reset the password for the ID associated with my iTunes. I can't reset through email because the email never shows up, not even in my spam folders. And I can't reset through security questions because when I enter in my birthdate the page says that the information is incorrect.
The following may help: If you didn't receive your Apple ID verification or reset email - Apple Support
-
Solution to the Kernel Panic Unable to Find Driver for This Platform "ACPI"
All,
I have had this issue with the a few times and thus far the only solution from Apple has been to do a reinstall of the OS. The catalytic event has been software updates from Apple and in the case it was iTunes. In the current case I did not even have the option to archive and reinstall, only option was to erase and install. Needless to say much time has been wasted... Apple now thinks it may be the logic board and I am slated for a repair.
Fortunately I was able to solve the issue this time around here are a few notes for you:
1) I had back-ups so data was less at risk ( we all know about this right!)
2) I had a boot partition - "eDrive" (care of Tech Tools Pro) that was able use as a startup disk (Option key at boot)
3) I was able to test and access the dead start-up partition an everything was in good order.
4) a search of the web lead me to this article - THANKS to all who posted
http://www.macfixitforums.com/printthread.php?Cat=&Board=tiger&main=827659&type= thread
5) The article gave me an idea. Now here is the easy part. I launched the 10.4.10 Combo Update while active in the good eDrive partition and selected the dead partition at he target to update.
6) that was it hat was all... rebooted and everything worked again.
I am still going to get the logic board replaced... too risky.
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B01
SMC Version: 1.12f5Hi Guys
No good news I'm afraid. I have been through ALL the system caches and files that were updated at the time of said issue. Reset - rebuild and even gone back to my TimeMachine copy from earlier this AM. Nothing! Can only assume it is something deeper in the /usr or var or private folders.....
I have cloned the system and core files (/usr, /private) etc etc to an external HD and it still recreates the fault. I am afraid to say I have no more time at the minute to look at so have put my machine back to 2 hours prior via my TimeCapsule.
I the absense of anyone else or, indeed, Apple fixing in the next 12 hours, will get back onto it from the cloned copy I have kept and see if I can find the offending file/files...
Sorry I don't have an immedaite solution. -
I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. It instructed me to hold power button to shut off and then press again to restart. Same error message keeps coming up and computer won't boot to home screen.
Error message:
Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
\"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
Debugger called panic
Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
THANKS FOR ANY HELP.
ROBBBoot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
Kernel Upgrade for all App systems
Hi,
I have to do a Kernel upgrade soon. I have one CI DB cluster and 4 App servers. Do I have to upgrade the kernel on each app system and the CI? I mean, do I have to copy the files to the RUN folder for each App server and for the CI?
ThanksHi
Ensure that you are using the SAP kernel recommended together with the latest SAP stacks for your product. For detailed information, see SAP Service Marketplace: http://service.sap.com/sp-stacks
SAP releases Support Package Stacks, including kernel patches, on a regular basis (2-4 times a year). Therefore, we also suggest you create a strategy to implement these stacks periodically.In special cases, you may need to use a more recent kernel patch than the one shipped with the latest Support Package Stack for your product like in case of traces.
Yes you need to update the patch level of all the servers in the system.
Hope this helps!!
Kind Regards
Esha Rajpal -
Error: Unable to find sources for current Linux Kernel
Hi Guys,
Hit a bump !!!!
Oracle Linux x86-64 installed successfully via Oracle VM box.
Clicked on 'Install Guest Additions'.
Ran VboxLinuxAdditions.run to install the Guest machine on Linux. It Failed and in error log (/var/log/vboxinstall.log) got the below error:-
Error: Unable to find sources for current Linux Kernel. Specify KERN_DIR=<directory> and run again
Looking upto Google i found I need to update Linux headers , in doing so get +'bash: apt-get : command not found'+ which I am not able to understand.
Any assistance is appreciated.
CheersThanks for the information. I was able to resolve it though.
Ran +'yum install gcc kernel-devel kernel-headers'+
Hence my query is resolved now.
Just one question - I need to copy text from Windows to Linux Terminal. Is there a command I can type into Linux terminal to enable copy paste from Windows to Linux and vice-versa ?
Cheers. -
Name: O
I just updated my iPhoto and now am asked to download the iPhoto Library Upgrader. I am asked for a password. I do not know it. How can I find it or reset it?
Are you asked for the password, when you run the installer for iPhoto Library upgrader?
Then the installer is asking you for the password of your administrator account. You need to authorize the installation. -
Unable to reset time and date after a software upgrade
unable to reset the time and date after a software upgrade on the TV
hello
I'm having a similar problem with my macbook. I just did a software update and now I can't get onto my internet. I checked the network diagnostics and the connection is fine, except when i click on the safari icon nothing happens.
Can anyone help with this?
Thanks! -
There was a user account established on my computer when I bought it. I later added an admin account. I realized that I did not have the password to the original account. Using the admin account, I changed the password for the user account. I then realized that I now couldn't access the keychain. I followed the instructions to reset a login keychain. Opened Keychain Access, selected Preferences, clicked Reset Login Keychain, typed the new password I'd created for the account but received the following error. Unable to obtain authorization for this operation. I cannot find a user/library/keychain folder so I can't delete the user keychain file. How can I reset the keychain?
A lot longer ago than that. PowerPC apps haven't been supported since Lion, 10.7.x.
You may have just purchased the game, but the developers obviously haven't kept up to date with the requirements for newer versions of the Mac OS.
You have three options, depending on how old your Mac is.
1) If it were ever able to boot directly to Snow Leopard, you could create a separate partition and install SL onto that partition. Make sure to turn on the option during the installation to install Rosetta. That is OS X's PPC emulator.
2) If your Mac is too new to install Snow Leopard, then you can purchase and install Snow Leopard Server within a VM, such as Parallels, VirtualBox, or Vmware.
3) Use a separate older Mac for running outdated software. -
Solution Manager 4.0- Kernel Upgrade(disp+work stops)
Hi,
While doing Kernel Upgrade for Solution manger 4.0 , the disp+work stops.
I have taken the Packs as per my requisite for Windows server X64 bit - Unicode
The files that were taken are :
SAPEXEDB_102-20001356.SAR
SAPEXE_102-20001354.SAR
The services were stopped,the sap was stopped and the exe backup was taken.
Now after uncar of the SAR files,and while starting the services and SAP, the disp+work stops.
The trace file of disp+work has been shown below:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid CPS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 102
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 756
Fri Aug 10 11:14:07 2007
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 756) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 102 successfully loaded
shared lib "dw_xtc.dll" version 102 successfully loaded
shared lib "dw_stl.dll" version 102 successfully loaded
shared lib "dw_gui.dll" version 102 successfully loaded
shared lib "dw_mdm.dll" version 102 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Aug 10 11:14:11 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >solmgr_CPS_00 <
DpShMCreate: sizeof(wp_adm) 19136 (1472)
DpShMCreate: sizeof(tm_adm) 5584592 (27784)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F320050, size: 6274496)
DpShMCreate: allocated sys_adm at 000000000F320050
DpShMCreate: allocated wp_adm at 000000000F321F40
DpShMCreate: allocated tm_adm_list at 000000000F326A00
DpShMCreate: allocated tm_adm at 000000000F326A60
DpShMCreate: allocated wp_ca_adm at 000000000F87A130
DpShMCreate: allocated appc_ca_adm at 000000000F87FEF0
DpShMCreate: allocated comm_adm at 000000000F881E30
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F908AC0
DpShMCreate: allocated gw_adm at 000000000F908B40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F908B70
DpShMCreate: allocated wall_adm at 000000000F908B80
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Aug 10 11:14:12 2007
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1904
argv[0] = D:\usr\sap\CPS\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\CPS\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\CPS\SYS\profile\CPS_DVEBMGS00_solmgr
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1061
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CPS
argv[7] = -DSAPMYNAME=solmgr_CPS_00
argv[8] = -DSAPPROFILE=D:\usr\sap\CPS\SYS\profile\CPS_DVEBMGS00_solmgr
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1626]
***LOG Q0K=> DpMsAttach, mscon ( solmgr) [dpxxdisp.c 11664]
DpStartStopMsg: send start message (myname is >solmgr_CPS_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Aug 10 11:14:13 2007
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Fri Aug 10 11:14:16 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 384
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1067) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1904)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Aug 10 11:14:52 2007
ERROR => W0 (pid 1548) died [dpxxdisp.c 14319]
ERROR => W1 (pid 1516) died [dpxxdisp.c 14319]
ERROR => W2 (pid 1944) died [dpxxdisp.c 14319]
ERROR => W3 (pid 1496) died [dpxxdisp.c 14319]
ERROR => W4 (pid 1968) died [dpxxdisp.c 14319]
ERROR => W5 (pid 1964) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1980) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2560) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2548) died [dpxxdisp.c 14319]
ERROR => W9 (pid 3052) died [dpxxdisp.c 14319]
ERROR => W10 (pid 1808) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 980) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 1792) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:02 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Aug 10 05:45:02 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1548 Ended no 1 0 0
1 DIA 1516 Ended no 1 0 0
2 DIA 1944 Ended no 1 0 0
3 DIA 1496 Ended no 1 0 0
4 DIA 1968 Ended no 1 0 0
5 DIA 1964 Ended no 1 0 0
6 UPD 1980 Ended no 1 0 0
7 ENQ 2560 Ended no 1 0 0
8 BTC 2548 Ended no 1 0 0
9 BTC 3052 Ended no 1 0 0
10 BTC 1808 Ended no 1 0 0
11 SPO 980 Ended no 1 0 0
12 UP2 1792 Ended no 1 0 0
Dispatcher Queue Statistics Fri Aug 10 05:45:02 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Fri Aug 10 05:45:02 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Aug 10 05:45:02 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:07 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >solmgr_CPS_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1404) (SOFT_KILL)
Stop icman
killing process (848) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1404 HANDLE:488)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1404 HANDLE:488)
wait for end of icman
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:13 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:14 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:15 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:16 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:17 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:18 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:19 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:848 HANDLE:496)
[DpProcDied] Process died (PID:1904 HANDLE:472)
DpStartStopMsg: send stop message (myname is >solmgr_CPS_00 <)
NiIMyHostName: hostname = 'solmgr'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri Aug 10 11:15:20 2007
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11977]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 416 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 416 (pos=3)
SiSelNRemove: removed sock 416
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 416
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 756) [dpxxdisp.c 10334]
Good Bye .....
Could you please help me in resolving this issue ?...
Regards,
Radeesh VHi,
Below is the trace file of dev_ms
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2416] Sat Aug 11 15:23:23 2007
[Thr 2416] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 73
intno 20050900
make: multithreaded, Unicode, optimized
pid 1252
[Thr 2416] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1252) [msxxserv.c 1824]
[Thr 2416] load acl file = D:\usr\sap\CPS\SYS\global\ms_acl_info.DAT
[Thr 2416] MsGetOwnIpAddr: my host addresses are :
[Thr 2416] 1 : [172.16.82.227] SOLMGR (HOSTNAME)
[Thr 2416] 2 : [127.0.0.1] solmgr (LOCALHOST)
[Thr 2416] Sat Aug 11 15:23:24 2007
[Thr 2416] MsHttpInit: full qualified hostname = solmgr
[Thr 2416] HTTP logging is switch off
[Thr 2416] set HTTP state to LISTEN
[Thr 2416] ms/icf_info_server : deleted
[Thr 2416] *** I listen to port sapmsCPS (3600) ***
[Thr 2416] *** I listen to internal port 3900 (3900) ***
[Thr 2416] *** HTTP port 8100 state LISTEN ***
[Thr 2416] CUSTOMER KEY: >C1198656006<
[Thr 2416] Sat Aug 11 15:23:51 2007
[Thr 2416] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 2416] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden) -
Server not starting after kernel upgrade
Hi,
I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system
After the kernel upgrade, the SAP is not starting
Pls let me know of what can be teh reason
The following is dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BWS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2204
Mon Jun 16 13:02:04 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2204) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Jun 16 13:02:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWS01_BWS_01 <
DpShMCreate: sizeof(wp_adm) 23680 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size: 6347104)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
DpShMCreate: allocated tm_adm at 000000000EE87E30
DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
DpShMCreate: allocated comm_adm at 000000000F3F39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F47A660
DpShMCreate: allocated gw_adm at 000000000F47A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F47A710
DpShMCreate: allocated wall_adm at 000000000F47A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3496
argv[0] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BWS
argv[7] = -DSAPMYNAME=WDBSSAPBWS01_BWS_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWS01) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >WDBSSAPBWS01_BWS_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Mon Jun 16 13:02:11 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 340
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2447) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3496)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Jun 16 13:02:49 2008
ERROR => DpHdlDeadWp: W0 (pid 3504) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 3380) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4348) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 4528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4360) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 788) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4432) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W8 (pid 3376) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W9 (pid 3632) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W10 (pid 3928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W12 (pid 3316) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4956) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 1136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 4968) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:02:59 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jun 16 17:02:59 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3504 Ended no 1 0 0
1 DIA 3380 Ended no 1 0 0
2 DIA 4348 Ended no 1 0 0
3 DIA 3528 Ended no 1 0 0
4 DIA 4528 Ended no 1 0 0
5 DIA 4360 Ended no 1 0 0
6 DIA 788 Ended no 1 0 0
7 DIA 4432 Ended no 1 0 0
8 UPD 3376 Ended no 1 0 0
9 ENQ 3632 Ended no 1 0 0
10 BTC 3928 Ended no 1 0 0
11 BTC 3304 Ended no 1 0 0
12 BTC 3316 Ended no 1 0 0
13 BTC 4956 Ended no 1 0 0
14 SPO 1136 Ended no 1 0 0
15 UP2 4968 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jun 16 17:02:59 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Mon Jun 16 17:02:59 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jun 16 17:02:59 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:04 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWS01_BWS_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1724) (SOFT_KILL)
Stop icman
killing process (2860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1724 HANDLE:448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1724 HANDLE:448)
wait for end of icman
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2860 HANDLE:456)
[DpProcDied] Process died (PID:3496 HANDLE:432)
DpStartStopMsg: send stop message (myname is >WDBSSAPBWS01_BWS_01 <)
NiIMyHostName: hostname = 'WDBSSAPBWS01'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Jun 16 13:03:17 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 364 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 364 (pos=3)
SiSelNRemove: removed sock 364
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 364
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2204) [dpxxdisp.c 10421]
Good Bye .....Are you sure the Database and the listeners are up and running?
Maybe you are looking for
-
Create GL/AR/AP documents
Hi SAP Experts, I am a technical consultant. I need to test a GST report for that i need some data to create in Development server. Please help me to create GL/AR/AP documents for testing. Regards, kishore
-
Hi , I'm facing a problem in displaying a JSP page . I'm displaying records from the database on the page . I want to display only 20 records at a time . I have given the navigation facility for previous,first ,last ,next etc. I'm getting all the rec
-
How to remove excess whitespace below my footer in muse
If you go to Admiral Computer Systems - IT Services in London And Kent on every page of the website below the footer is a large chunk of excess whitespace that i want to get rid of its there regardless of whether sticky footer is checked or not. the
-
Hi Everyone, I have been reading about adding an onchange event to a field in a form. My dilemma is below; I have a form where there is a date field that shows the end date of something. I want to auto populate another field with that same end date p
-
Adobe Flash - text to speech software
Is there a software out there that can convert Adobe Flash text to speech?