Kernel version for SAP ERP 6 Ehp4

Hi all,
We have installed ERP 6 Ehp 4 with SAP kernel 7.01. Is it possible to upgrade kernel to version 7.20 without upgrading other components (basis) to Ehp 5?
Thank you for your answers
Andrej

Hi, this is so called Rolling Kernel switch.
you can replace to the release 720 without much problems. I have done this in release 710.
However, could exist some situations that you have to update the support package like in my case that I had the short dump DDIC_TYPELENG_INCONSISTENT after the kernel update. You can check further details in note  1636252.
this is the main note about the project: 1616491
Cheers,
Clébio

Similar Messages

  • What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

    What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

    Hi,
    Login to  http://service.sap.com/swdc using your S user-id
    Serach for kernel
    Check for your relevent kernel patch (unicode/non-unicode , NW release etc.)
    Regards,
    Rajneesh

  • Component Version "SAP ERP 6.0" instead of "EHP 4 for SAP ERP 6.0 /7.0"

    Hi All,
    We went to ERP Enhancement Package 4 in ours SAP Systems.
    We performed the upgrade (with the SAPehpi tool) in DEV and TEST, the weird part is that in DEV the System Data - Component Version shows "SAP ECC 6.0" and in TEST shows "EHP 4 for SAP ERP 6.0 /7.0".
    The 2 systems have the same SP level.
    Any idea ?
    Thanks,
    Juan.

    Hi,
    After EHP4 upgrade it should show ECC 6.0 only.
    check below thread:
    /thread/1432042 [original link is broken]
    Thanks
    Sunny

  • Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01.

    Dear Experts,
    We have solution manger 7.0 ehp1 ,
    ERP 6. 0 EHP4 Development server(seperate server) this is upgraded from erp 6.0 to erp 6.0 ehp4
    I configured the maintenece optimzer also. and created the RFC destinations also it is working fine. For downloading the support packages  In Miantenance optimizer I am getting the error.
    Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01
    I deleted the systems in SMSY and and recreated using the SLD refresh. Agin also I am getting the sama error for downloading the support packages. I chagned the systems details in the Service.sap.com also. in the logs it is showing the below error also
    No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)
    thanks

    Hello,
    we have the same error in our environment.
    Product version is EHP4 for ERP6.0 and we have both product version (EHP4 and ERP 6.0) active in the SMSY as described in SAP note 1464712 and nethertheless we get this error message.
    " No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)"
    Anyone with a solution here?
    Greets
    Jens

  • EHP4 FOR SAP ERP 6.0 / NW7.01

    I am new to SAP and have successfully Installed SAP ERP 6.0/NW 7.01 on Windows Server 2008 R2 with Oracle 10g. We would like to go ahead and apply the enhancements Package 4 to ERP 6.0 (SAP Enh. Package 4 for SAP ERP 6.0 1). I have no knowledge on how to install Enhancement packages.
    Can someone please guide me on what is needed. What program or utility I can use to apply the EHP4. Any tips or direction would be would be nice.

    Hi Amirsd,
    You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
    Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
    After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
    It would run in 7 phases including downtime phase.
    Let me know if you have any queries. !!!!
    Regards,
    Shobhit Garg

  • CRM 5.0 Compatibility with backend upgraded to EHP4 FOR SAP ERP 6.0 / NW7.0

    Hello,
    What are the  compatibility issues for EHP4 FOR SAP ERP 6.0  Upgrade with CRM 5.0 ? Are there any OSS notes to address upgrade specific issues?
    Following are the System Details:
    Upgraded EHP4 FOR SAP ERP 6.0 / NW7.01
    Component: SAP_APPL 
    Release:      604
    Support Pack: SAPKH60402
    Level:  0002
    Existing CRM 5.0
    Component:     BBPCRM
    Release: 500
    Support Pack: SAPKU50006
    Level: 0006
    Thanks,
    AG
    Edited by: Arijeet Ganguly on Sep 15, 2009 11:49 PM

    Hi Amirsd,
    You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
    Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
    After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
    It would run in 7 phases including downtime phase.
    Let me know if you have any queries. !!!!
    Regards,
    Shobhit Garg

  • EHP4 for SAP ERP 6.0

    Hello,
    I am installing Enhancement Package 4 for SAP ERP 6.0 (Windows Server 2003 x64/Oracle) using EHPinstaller tool.
    SAP ERP 6.0 is an existing system. When I started the EHPi tool, I got to know that there are 8 stages in the installation roadmap.
    If anyone has done this before, could you please let me know how much time (days/hrs) does this entire process take (all the 8 stages) as I am stuck in the EXTRACTION stage (2nd stage) for more than 24 hrs now. The EHPi is running as I can see in the task manager (1 to 4% CPU Utilization with no users on the SAP system), but its taking lots of time.
    I havent even entered the 'resource utilization strategy' yet, which is taken as a parameter in the 3rd stage of CONFIGURATION.
    I have already done the PREPARATION steps in installation guide, but am unable to find the reason behind such a long running stage.
    Also, on checking EHPi logs, no error is logged as yet.
    Please let me know the how long should I wait before stopping/terminating the installation?
    Regards,
    Saurabh.

    > If anyone has done this before, could you please let me know how much time (days/hrs) does this entire process take (all the 8 stages) as I am stuck in the EXTRACTION stage (2nd stage) for more than 24 hrs now. The EHPi is running as I can see in the task manager (1 to 4% CPU Utilization with no users on the SAP system), but its taking lots of time.
    This depends HEAVILY on your system speed. I have made EHP4 installations taking 2 days to 7 days.
    24h for the extraction is very much, there seems to be a problem. I'd check the latest logs in EHPI\abap\log for possible issues. The extraction usually does nothing more than extracting all the SAR files to the correct places. This shouldn't take 24 h.
    BTW: there's a special forum for EHP installations: /community [original link is broken]
    Markus

  • Cannot download SPS15 for SAP ERP 6.0 from MOPZ

    Hello gurus,
    I need your help. I am planning to upgrade my ECC 6.0 system to EhP4 SPS3, but for this I need to update my system first from its current level of SPS09 to SPS15 (SP Level equivalent of EhP4 SPS03), so for this I want to download SPS15 from maintenance optimizer for my system EC2 which is an ERP 6.0.
    There are two update options, right: Maintenance and Enhancement Package Installation. I chose maintenance, and then clicked next. But all i see is the following:
    TArget Enhancement Package Version: SAP ERP EhP4 / NW7.01
    Target enhancement package stack: SAP ERP EhP4 on NW7.01 - SP Stack (02-09)
    But all i want to download is SPS15. How can I proceed?
    Please advise.
    thanks a lot in advance!
    Cha Cha

    Hello,
    You can download SP stacks for ERP 6 from https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/swdc/sps/index.do?pvnr=01200615320900001296&u=&session_id=saI04682020110726143831SID%3aANON%3apwdf4962_OW1_01%3aV1BCP1X74ObZRnSxXvbbcuh1vWLml2Fhd4HPbVs2-ATT
    if the solution of your support message takes long. You can always request the approval of the download basket with a message under component SV-SMG-MAI-APR.
    Best regards,
    Miguel Ariñ

  • E-commerce 5.0 for SAP ERP 6.0 ehp3: detailed description of product

    Hello community,
    I have installed and customized B2C shop (version 5.0) for SAP ERP 6.0 (NO TREX, NO IPC).
    At first i maintained my shop with english language and after i checked out that all work properly i decided to localize it for russian language.
    I created new shop for russian language and faced the following problem: list of products in my shop displays correctly but when i want to check detailed description of product (click on product in list) i see something like this &#1053 &#1086 &#1091 &#1090 &#1073 &#1091 &#1082  instead of description on russian.
    Can somebody help me to sort out this issue?
    Thanks in advance.
    BR,
    Dzmitry

    HI,
    I  can obtain detailed description of product on russian after i installed SAP E-commerce for SAP ERP version 7.0 instead of version 5.0.
    Br,
    Dzmitry

  • Wrong Component Version for sap system

    Hi All,
    I upgraded CRM 7.01 to EHP3 / NW 7.40.
    But in System -> Status Component version is SAP System Component version is EHP7 for SAP ERP 6.0 and not SAP CRM ABAP 7.01 EHP3.
    The upgrade was successfull and APPL component is at 7.40 04.
    I need to correct SAP System Component version. This made some  confusion for my college.
    Is any body has the same problem.
    Thanks for any help.

    Hello Reagan,
    Here is result and explanation .

  • Recommended Oracle version for SAP 4.7 and for BW 3.5

    Hi,
    where I can find the SAP's recommended version of Oracle for SAP ERP 4.7 and BW 3.5?
    Thanks
    Message was edited by:
            giovanni maria maccioni

    Hi,
    Recommended would be 10.2.0.2
    Oracle has ended the customer care support for 9.2 in July 2007:
    Note 925871 - Discontinuation of 'Customer Care Support' for Oracle 9.2
    At the same time, SAP customers have a "free" year of  Extended Support for Version 9.2.
    9.2.0.8 is the latest patch set provided for 9.2. (see note 1021844)
    I think that, if you are planning to perform a new installation, it would be better to do it in 10.2

  • What is the latest kernel version for OL6

    Hi,
    After a yum update, this is what I got:
    2.6.32-300.39.1.el6uek.x86_64
    I am using a SSD and it seems (based on en.wikipedia.org/wiki/TRIM) that
    support for ATA TRIM was added in 2.6.33.
    My question is what is the latest kernel version for OL6?
    Thanks,
    Zhe

    alwu wrote:
    My question is what is the latest kernel version for OL6?2.6.39-300.17.2 (which is actually 3.0.17 under the hood) is available in the ol6_x86_64_UEK_latest channel. You will need to modify your ULN channel subscription or which channels are enabled from public-yum.oracle.com to install this kernel.
    Edited by: Avi Miller on Dec 6, 2012 10:41 AM

  • Enhancement Package 5 for SAP ERP 6.0 - Webinar Series - Oct-Nov 2011

    Webinar Series: Enhancement Packages for SAP ERP
    Innovation Made easy!
    SAP enhancement packages (EHPs) are optional add-on packages that enable you to selectively install and use new functions without a major release upgrade. Since May 2011 enhancement package 5 for SAP ERP 6.0 is general available. With this latest enhancement package more than 500 business functions are delivered in order to improve or enhance the various SAP ERP application areas, industry solutions and usability.
    Customers running SAP ERP 6.0 can benefit by installing SAP enhancement package 5 and switch on any of the new business functions.
    Get insights and an overview of whatu2019s new with SAP enhancement packages and how innovation is made easy. Join the upcoming webinar session series covering what you need to know about EHPs and activating new functions and the major improvements in SAP ERP Financials, SAP ERP HCM, SAP ERP Operations and the areas of usability and user interfaces.
    In one-hour sessions SAP Experts will introduce the new functions; provide a u201Cliveu201D experience on selected topics and will be available to answer your questions.
    Target group: These webinars are pointed to IT-managers, business managers, business analysts and business process experts.
    Cost: Joining these webinar series is free of charge.
    Language: English
    Dates: Oct 13 to Nov 29, 2011
    Region: Americas
    Topics included
         Enhancement Packages for SAP ERP: Innovation Made Easy - Learn how to do it
         Enhancement Packages for SAP ERP: What is new in SAP ERP Operations?
         Enhancement Packages for SAP ERP: What is new in SAP ERP HCM?
         Enhancement Packages for SAP ERP: What is new in SAP ERP Financials?
         Enhancement Packages for SAP ERP: What is new for User Interface and Usability?
    To register please visit http://www.sap.com/mk/get/ehp

    Hi Partson,
    It is needed to connect this system with solution manager and create stack.xml using
    maintanance optimizer. The main aim of this is to let you know what usage types/ functionalities are to be
    selected from stack.xml.
    It is also needed to download all the required support packs/ addons using maintanance optimizer.
    If you have DVDs containing the same product that matches with stack.xml, you can provide them.
    But the safest way is is to give all the tasks to solution manager , It will create , and download neccesary sps, addons to your
    download basket.
    Thanks and Regards
    Purna

  • Linux version for SAP ECC 6.0

    Dear all,
    Please help me in finding the suitable Linux version for SAP ECC 6.0 version.
    Thanks & Regards
    Tavargeri Ganesh

    SAP on Linux
    --> Supported platforms
    Markus

  • Check Connection of Communication Arrangement for SAP ERP Financials Using IDoc Failed

    Dear experts,
    We are checking outbound connection from C4TE to ERP in Communication Arrangement for SAP ERP Financials Using IDoc Failed.
    We get the attached error message:
    Checking connection failed
    Error accessing service; Service Ping ERROR: Forbidden (403)
    What could be the reasons, in ERP side, through Tcode SMICM, we didn't see any log from C4TE side, and we cannot ping the ERP side successfully.
    One more thing, in C4TE, we tried to set the connection to an SAP internal ERP system, and the connection was successful. But when relinked to the customer ERP system, connection failed.
    Could it be firewalls reason?
    Thanks!
    Best regards,
    Wendy

    Hi Wendy,
    Yes the assumption could be one reason as well for the error (403 forbidden), but there could be several other aspects also to get the 403 error, for better understanding the reason for the error,  may I request you to create an incident send it to us.
    Also please try once running the scenario in C4T and check if the relevant documents are being sent through Outbound Service or not.
    Thanks & Regards,
    Bharath

Maybe you are looking for

  • TLS support in C API's, follow-up

    Hello, In September 2013 I started a thread "SSL/TLS version in pre-built C api's" asking about the TLS support. I just want to share the info as a follow-up. The first approach was to change the current code for the Novell libraries but since the op

  • The most awful pvr box I have ever had the misfort...

    I got BT Vision a few months ago and have, right from the start, been frustrated by the terrible box. I've been using pvrs for many years, my favourite manufacture is Humax, fwiw. BT box good points: The padding where it will pad programmes that star

  • SIN number is not displayed in IT0002

    Experts, I have set up the hiring action for UK. Made all Infogroups and made it dependent on MoL and UGR. But when I hire a UK employee  theSIN field is not displayed in IT0002. Its working fine for all the countries like US and NL etc. Any pointers

  • Mac Pro 1,1 disassembly for CPU upgrade in pictures

    A while back I upgraded my 2006 Mac Pro dual 2.66 Xeons to dual 3.0 Xeons just to see if I can do it. Kind of a practice run before I pay tons of money for 8-core 3.0 Xeons. In case anyone is wondering how it's taken apart for CPU upgrade, here's som

  • HT2731 How to update payment account

    HOw do I update a new payment method with a new bank account