Kernel26-ice comments and suggestions

hi.
Please post here comments and suggestions here...
enjoy kernel26-ice
bye

I'm using reiser4... I build kernel myself, so I patched reiser4 for 2.6.28.1 + additional little __grab_cache_page patch which I made myself, like 2-3 days ago or so... Worked like a charm...
Do You have any special complaints about reiser4?
As for the -ice thing, I tried it, I see logs that say pm-utils are replace by tuxonice, but my stupid nvidia doesn't hibernate and hangs up, there was that page allowance thing I think... Is it so that -ice + page allowance needs hibernate script? I would like to use standard gnome power manager, so I can hibernate / suspend easily, is there a workaround for gnome to use hibernate script?
Sorry, but I don't know details or whatever else about hibernate script and integration with gnome, so any suggestion would be beneficial...
Thanx in advance...
Last edited by Kirurgs (2009-01-20 16:36:02)

Similar Messages

Comments and Suggestions Please

Dear Apple List,
We are looking for comments and suggestions on how to improve and enhance our website - both aesthetically and perhaps in terms of function.
We would really appreciate any advice you might have. Thank you
http://www.thebaandekmontessori.org

There is something mysterious in people's behaviour. If they bought something and they never experienced any problem with it, they tend to stay with that brand, but if they encountered difficulties and especially if that happened more than once, they tend to steer away from that brand. If you buy a certain brand of car and it is at the dealer for repairs more often than you like, your next car will probably be another brand.
I have had my share of problems with Seagate disks (7200.11 series that were notoriously bad and had a failure rate of more than 100% after several were replaced under warranty), so my natural tendency was to steer away from Seagate and look for other options. However, when I considered the price of their 7200.14 series, I was tempted again, but at the same time turned off by their meager 1 year warranty and the reviews on for instance NewEgg. Those reviews are generally rather meaningless, because you never know how people have handled and installed their stuff, but nevertheless it was a mark on the wall for me. In my specific case I needed 25 identical disks to start with and based on price, warranty and reputation I selected Seagate Constellation ES (the Enterprise editions) drives, which up to now have performed flawlessly for 6 months. I have to admit I have never used WD drives at all apart from the Velociraptor which is still going strong in my old system, but they seem to have a good reputation, have a nice warranty period and are somewhat reasonable priced.
I have no idea how much space you need, what future plans you have (do you need to get a parity raid in the future) and stuff like that, but WD Caviar Blacks have a solid reputation for single disk use or in striped arrays. OTOH in parity arrays they are lousy, so if you may consider a parity array on a dedicated controller, the Blacks are out.
For setting up your disks, have a look at http://forums.adobe.com/thread/662972

Just Created Website Looking For Comments and Suggestions

Hello all,
Just created a website and was hoping to solicit some comments and suggestions. The site is not complete and is still in its germinal stages, but would appreciate any guidance you all might have.
Thanks

Robert,
Personally, I found the color scheme very drab and depressing. On the Welcome page and the info on Maria Montessori, it's all grey on grey (background and font and pics). Even something as subtle as making the small topic title headings a color will really make the page pop and bring the page to life.
What about adding some pics of the facility? Just a thought.
Hope this helps.
Todd

Need some comments and suggestions

...please try to give some comments and suggestions to my
sites... thanks..
http://bizgraphix.com

Vey good graphic design.
A few suggestions:
1. Either slow down your animations, or make one of them
stop. It makes me a bit dizzy looking at both moving all the time.
2. Get someone to edit your text for you. There is too much
repetition, the lists are too long, and there are many grammatical
errors. If you would like help, email me.
Site looks great!
You have very good design skills.
P

New PC Build Comments and Suggestions please :)

I am going to build a new PC for Video editing etc.
Adobe Premiere, After Effects, the Whole CS6 package amoung others.
I want the best bang for the buck
Currently I have a tower case, and a corsair 650 powersupply.
This is what I was considering to build.
MY Max Budget is 1500, THAT IS MAX I really want around $1000-$1300
I7 3770 or 3770K (3770K is $229, 3770 $260) Not sure which is best is it worth $30
more for 3770 over 3770K
Cooler Master Hyper 212 EVO12 evo $30
Motherboard
Gigabyte GA-Z77X-UP4 TH LGA 1155 $185
http://www.microcenter.com/product/396870/GA-Z77X-UP4_TH_LGA_1155_Intel_Z77_ATX_Intel_Moth erboard
I like this board because it has thunderbolt. I have no use for thunderbolt yet, but may later
RAM 32 GB Hyper X Red 16GB DDR3-1600 $170 for 2 sets
http://www.microcenter.com/product/401554/Hyper_X_Red_16GB_DDR3-1600_%28PC3-
12800%29_CL_10_Desktop_Memory_Kit_%28Two_8GB_Memory_Modules%29
MSI NVIDIA GeForce GTX 660 Twin Frozr III $209 After Rebate
http://www.microcenter.com/product/403002/N660_TF_2GD5-
OC_NVIDIA_GeForce_GTX_660_Twin_Frozr_III_Overclocked_2048MB_GDDR5_PCIe_30_x16_Video_Card
SSD 256 GB Crucial M4 $199
I am debating getting
2 - 2 TB
Seagate Barracuda 2TB 7,200 RPM SATA 6.0Gb/s
Or 2 Western Digital Caviar Black 1 TB
They both cost the same ($90) I get double storage from
Seagate of course
Seems like Western Digital Black may be more reliable
My plan would be to put whichever of these drives I get into
a Raid 0 Array.
Not sure what would be best purpose for the Raid 0 would be I have seen
a few different ideas as to the best use for Raid 0
That can be debated later
Western Digital 750GB 3.5" SATA 7,200RPM $48
Just for storage of Other files etc etc or whatever the best use may be for it.
If it can be used with Adobe apps as well great.
LG 14X Blu Ray Burner $60
perhaps a couple corsair case fans if needed $30 for 2
May not need them. I know my case already has at least one fan.
Total for all of this is about $1310
Comments, Suggestions please???
If I cut the costs some I may put that towards another monitor, or perhaps
An editing keyboard specific to adobe. I also don't want to sacrafice much performance either.

There is something mysterious in people's behaviour. If they bought something and they never experienced any problem with it, they tend to stay with that brand, but if they encountered difficulties and especially if that happened more than once, they tend to steer away from that brand. If you buy a certain brand of car and it is at the dealer for repairs more often than you like, your next car will probably be another brand.
I have had my share of problems with Seagate disks (7200.11 series that were notoriously bad and had a failure rate of more than 100% after several were replaced under warranty), so my natural tendency was to steer away from Seagate and look for other options. However, when I considered the price of their 7200.14 series, I was tempted again, but at the same time turned off by their meager 1 year warranty and the reviews on for instance NewEgg. Those reviews are generally rather meaningless, because you never know how people have handled and installed their stuff, but nevertheless it was a mark on the wall for me. In my specific case I needed 25 identical disks to start with and based on price, warranty and reputation I selected Seagate Constellation ES (the Enterprise editions) drives, which up to now have performed flawlessly for 6 months. I have to admit I have never used WD drives at all apart from the Velociraptor which is still going strong in my old system, but they seem to have a good reputation, have a nice warranty period and are somewhat reasonable priced.
I have no idea how much space you need, what future plans you have (do you need to get a parity raid in the future) and stuff like that, but WD Caviar Blacks have a solid reputation for single disk use or in striped arrays. OTOH in parity arrays they are lousy, so if you may consider a parity array on a dedicated controller, the Blacks are out.
For setting up your disks, have a look at http://forums.adobe.com/thread/662972

Repeated 1212m errors. Comments and suggestions welcome.

Hello, all. Got a problem here I hope you can help me with.
I built my audio/video editing computer in July. It's an Asus P5N-E SLI with an EVGA 7950 graphics card, two gigs of memory, a lot of hard drives, and the E-Mu 1212m, running Windows XP SP2.
Everything worked perfectly until two days ago, when I booted the machine and got that "You don't have sufficient hardware to run PatchMix DSP" error.
I read on these boards and others that there is no fix for this, other than to restore the defaults and hope for the best. That didn't work for me. After hours of adjusting settings, installing and uninstalling the drivers and PatchMix application, it worked again. Then, this morning, it went back to not working at all.
If I play a song, I can see the meters going up and down, but hear no sound anywhere. I now have the 1010 connected to a receiver with an S/PDIF connector and the 0202 connected to a mixer through the two out jacks. I was hoping to get sound out of one of them.
Also, in the PatchMix screen (I tried several different sessions, none of which worked. It's currently on Product Default.), strips two and three--"I/O Card In L" and "I/O Card In R"--are in red with little exclamation points to the lower left of their names. I assume that means "This isn't working!" but I can't do anything to change it.
In the Control Panel, the E-Mu card is listed as working properly. The driver is Creative's version 5.12.4.1104 from 10/22/05.
I tried uninstalling and reinstalling the card there. No change in performance. I've uninstalled and reinstalled the PatchMix application also with no success.
The MIDI ports on the 0202 do work. I can see the activity lights turning on and off in several VSTs
The FireWire port on the 1010 works, too. I plugged in my camcorder and Windows recognized it immediately.
The computer is not hooked up to the internet and I have not installed any new hardware or software since I built it back in July. I can't think of any reason why it would suddenly start giving me these errors.
The last thing to do now is physically remove the card from the computer, uninstall every piece of software related to it, and reinstall the card, probably in a different slot, then reload the software. I'll let you all know how that goes.
Since this glitch seems to have happened to several other people, if anyone has any suggestions or ideas--especially if someone found a proper fix--please post them here. I have a feeling that, since this happened for no apparent reason after four months of usage, it's bound to happen again.
Thanks!

Hello, all. Got a problem here I hope you can help me with.
I built my audio/video editing computer in July. It's an Asus P5N-E SLI with an EVGA 7950 graphics card, two gigs of memory, a lot of hard drives, and the E-Mu 1212m, running Windows XP SP2.
Everything worked perfectly until two days ago, when I booted the machine and got that "You don't have sufficient hardware to run PatchMix DSP" error.
I read on these boards and others that there is no fix for this, other than to restore the defaults and hope for the best. That didn't work for me. After hours of adjusting settings, installing and uninstalling the drivers and PatchMix application, it worked again. Then, this morning, it went back to not working at all.
If I play a song, I can see the meters going up and down, but hear no sound anywhere. I now have the 1010 connected to a receiver with an S/PDIF connector and the 0202 connected to a mixer through the two out jacks. I was hoping to get sound out of one of them.
Also, in the PatchMix screen (I tried several different sessions, none of which worked. It's currently on Product Default.), strips two and three--"I/O Card In L" and "I/O Card In R"--are in red with little exclamation points to the lower left of their names. I assume that means "This isn't working!" but I can't do anything to change it.
In the Control Panel, the E-Mu card is listed as working properly. The driver is Creative's version 5.12.4.1104 from 10/22/05.
I tried uninstalling and reinstalling the card there. No change in performance. I've uninstalled and reinstalled the PatchMix application also with no success.
The MIDI ports on the 0202 do work. I can see the activity lights turning on and off in several VSTs
The FireWire port on the 1010 works, too. I plugged in my camcorder and Windows recognized it immediately.
The computer is not hooked up to the internet and I have not installed any new hardware or software since I built it back in July. I can't think of any reason why it would suddenly start giving me these errors.
The last thing to do now is physically remove the card from the computer, uninstall every piece of software related to it, and reinstall the card, probably in a different slot, then reload the software. I'll let you all know how that goes.
Since this glitch seems to have happened to several other people, if anyone has any suggestions or ideas--especially if someone found a proper fix--please post them here. I have a feeling that, since this happened for no apparent reason after four months of usage, it's bound to happen again.
Thanks!

2009 Survey is open - and a good place to offer comments and suggestions

Hi all:
The 2009 survey is a good place to make your voices heard about SDN, BPX, BusinessObjects communities. It'll take a few minutes and earns you a few points, plus someone will win a free ticket to TechEd '09. Go here please: http://sdnweb.sdn.sap.com/cnsurveys/SDNSurvey2009.htm

You may try iFixit.com and see if they have a battery for your model MBP.
Ciao.

Usage of CRM_ORDER_MAINTAIN SAP Help Link and Suggestions Required

This is regarding CRM_ORDER_MAINTAIN fm
Currently we are using function module crm_order_maintain outside Loop i.e calling once for all the contracts as sap crm performance standard ,
Is there any standard documentation where we can find that states CRM_ORDER_MAINTAIN should be only used outside loop,
As some are telling us to use in Loop Endloop because of timeout error in background job with contract having 180 line items,Which i feel that this create unneccessary load on execution (Not Recommendable)
Please share any comments and suggestion this and also provide me the SAP Help Link on this

Hi,
for example to you, look for FM CRM_LRP_APPOINTMENTS_GET_DIAG which using CRM_ORDER_MAINTAIN and parameter it_appointment.
Hope this helps.
Regards, Kostya Khveshchenik

Kernel26-ice, RT update/option

The below is now outdated, because I've just submitted the kernel26-rt-ice package to the AUR and will be maintaining it. It can be found here. Please use this thread for support request/questions. Of course, AFTER googling/searching the wiki/forums.
Hi all,
Please let me draw your attention to kernel26-ice, maintained by iceman81. Since 14-Apr-09, the RT patch has been tacked on to that kernel, and can be applied simply by changing a single variable in the PKGBUILD.
However, the kernel is first and foremost and ICE kernel, so updates to the RT version will not be reflected by a changed version number. In other words, yaourt will not notify you its been updated, so on and so forth. So, the purpose of this thread is so that you can be informed everytime there is an update to the RT patch, as applied to kernel26-ice. I'm responsible for the thread, and will simply post a message here everytime there is an update, so subscribe here if you like.
Note: Please simply click 'Subscribe to this topic' right at the bottom (its above the Quick post region, on the left) instead of replying to subscribe, so that subscribers do not receive non-related notifications. Thank you all for your cooperation, and iceman81 for your maintainance of the ice, and now the RT, kernels.
Throughout the lifespan of 2.6.30 there was no workable -rt kernel. This will likely recur at 2.6.32. Because of that, I'll be keeping here a record of the last working PKGBUILD I have used from kernel26-ice, with the appropriate modifications for RT. I do not want to maintain a separate PKGBUILD on the AUR, as this is iceman81's project, and I do not have the skills to do more than modify his builds.
# Contributor: Giuseppe Calderaro <[email protected]>
pkgname=kernel26-ice
pkgver=2.6.31
pkgrel=2
pkgdesc="The Linux Kernel and modules with gentoo-sources patchset and tuxonice support"
arch=('i686' 'x86_64')
license=('GPL2')
url="http://www.kernel.org"
backup=('boot/kconfig26-ice' etc/mkinitcpio.d/${pkgname}.preset etc/mkinitcpio.d/${pkgname}-fallback.conf)
depends=('coreutils' 'module-init-tools' 'mkinitcpio>=0.5.15' 'kernel26-firmware')
install=kernel26-ice.install
### User defined variables
bfs_scheduler="0"
enable_fastboot="0"
keep_source_code="0"
menuconfig="0"
realtime_patch="1"
source=(http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.31.tar.bz2
# http://www.kernel.org/pub/linux/kernel/v2.6/patch-2.6.31.1.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.31-rt11.bz2
http://sources.gentoo.org/viewcvs.py/*checkout*/linux-patches/genpatches-2.6/trunk/2.6.31/4100_dm-bbr.patch
http://sources.gentoo.org/viewcvs.py/*checkout*/linux-patches/genpatches-2.6/trunk/2.6.31/4202_fbcondecor-0.9.6.patch
http://sources.gentoo.org/viewcvs.py/*checkout*/linux-patches/genpatches-2.6/trunk/2.6.31/4400_alpha-sysctl-uac.patch
http://www.kernel.org/pub/linux/kernel/people/edward/reiser4/reiser4-for-2.6/reiser4-for-2.6.30.patch.gz
http://www.tuxonice.net/downloads/all/current-tuxonice-for-2.6.31.patch-20090911-v1.bz2
http://ck.kolivas.org/patches/bfs/2.6.31-sched-bfs-232.patch
Auke-Kok-s-patch-to-kernel-2.6.30.patch
config
config.x86_64
$pkgname.preset
mkinitcpio-$pkgname.conf)
md5sums=('84c077a37684e4cbfa67b18154390d8a'
'7be575537db7ff654f8e53d4e17d1954'
'e501d050605a7399e7b12a6b14903631'
'b62bd712dd0d45b32ec73f522018a3a7'
'21562518ab45d8be9c67d316aef9399f'
'ecd82eb87e5da25e38db1ef34fd32b33'
'0683813ac1a521408b4c136d72fbb9d2'
'389ee48a8f4d0612dc32fc3f0ba8123c'
'5bd5c60b7e7664e8794279e99cafd185'
'ff6fce30588368d961c3a61c4a623207'
'575d39660246322e185b07bc3be698be'
'541973d72e24a2def82d33884a781ee1'
'07dc6997d19340b654f92c1d6a120cc0')
build() {
[ "${CARCH}" = "i686" ] && KARCH=x86
[ "${CARCH}" = "x86_64" ] && KARCH=x86
cd $startdir/src/linux-$pkgver
# Applying official patch
# echo "Applying patch-$pkgver.1"
# patch -Np1 -i $startdir/src/patch-$pkgver.6 || return 1
# Applying realtime patch
if [ "$realtime_patch" = "1" ]; then
echo "Applying real time patch"
patch -Np1 -i $startdir/src/patch-2.6.31-rt11 || return 1
fi
# Applying base gentoo patches
for i in $(ls $startdir/src/[1-3][0-9][0-9][0-9]*);do
echo "Applying $i"
patch -Np1 -i $i || return 1
done
if [ "$realtime_patch" = "0" ]; then
# Applying extra gentoo patches
for i in $(ls $startdir/src/[4-9][0-9][0-9][0-9]*); do
echo "Applying $i"
patch -Np1 -i $i || return 1
done
fi
# applying reiserfs4 patch
echo "Applying reiser4-for-2.6.30.patch"
patch -Np1 -i $startdir/src/reiser4-for-2.6.30.patch || return 1
if [ "$realtime_patch" = "0" ]; then
# applying tuxonice patch
echo "Applying current-tuxonice-for-2.6.31.patch-20090911-v1"
patch -Np1 -i $startdir/src/current-tuxonice-for-2.6.31.patch-20090911-v1 || return 1
fi
if [ "$enable_fastboot" = "1" ]; then
# applying fastboot patch
echo "Applying Auke-Kok-s-patch-to-kernel-2.6.30.patch"
patch -Np1 -i $startdir/src/Auke-Kok-s-patch-to-kernel-2.6.30.patch || return 1
fi
if [ "$bfs_scheduler" = "1" ]; then
# applying BFS scheduler patch
echo "Applying BFS scheduler patch"
patch -Np1 -i $startdir/src/2.6.31-sched-bfs-230.patch || return 1
fi
# remove extraversion
sed -i 's|^EXTRAVERSION = .*$|EXTRAVERSION =|g' Makefile
# load configuration for i686 or x86_64
if [ "$CARCH" = "x86_64" ]; then
cat ../config.x86_64 > ./.config
else
cat ../config > ./.config
fi
# get kernel version
make prepare
_kernver="$(make kernelrelease)"
# configure kernel
if [ "$menuconfig" = "1" ]; then
make menuconfig
fi
yes "" | make config
if [ "$keep_source_code" = "1" ]; then
echo -n "Copying source code..."
# Keep the source code
cd $startdir || return 1
mkdir -p $startdir/pkg/usr/src || return 1
cp -a $startdir/src/linux-$pkgver $startdir/pkg/usr/src/linux-$_kernver || return 1
#Add a link from the modules directory
mkdir -p $startdir/pkg/lib/modules/$_kernver || return 1
cd $startdir/pkg/lib/modules/$_kernver || return 1
rm -f source
ln -s ../../../usr/src/linux-$_kernver source || return 1
echo "OK"
fi
cd $startdir/src/linux-$pkgver
# build kernel
make bzImage modules || return 1
mkdir -p $startdir/pkg/{lib/modules,boot}
make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
install -D -m644 System.map $startdir/pkg/boot/System.map26-ice
install -D -m644 arch/$KARCH/boot/bzImage $startdir/pkg/boot/vmlinuz26-ice
install -D -m644 Makefile $startdir/pkg/usr/src/linux-$_kernver/Makefile
install -D -m644 kernel/Makefile $startdir/pkg/usr/src/linux-$_kernver/kernel/Makefile
install -D -m644 .config $startdir/pkg/usr/src/linux-$_kernver/.config
install -D -m644 .config $startdir/pkg/boot/kconfig26-ice
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/include
for i in acpi asm-{generic,$KARCH} config linux math-emu media net pcmcia scsi sound trace video; do
cp -a include/$i $startdir/pkg/usr/src/linux-$_kernver/include/
done
# copy arch includes for external modules
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH
cp -a arch/$KARCH/include ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers $startdir/pkg/usr/src/linux-$_kernver
cp -a scripts $startdir/pkg/usr/src/linux-$_kernver
# fix permissions on scripts dir
chmod og-w -R $startdir/pkg/usr/src/linux-$_kernver/scripts
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/arch/$KARCH/kernel
cp arch/$KARCH/Makefile $startdir/pkg/usr/src/linux-$_kernver/arch/$KARCH/
if [ "${CARCH}" = "i686" ]; then
cp arch/$KARCH/Makefile_32.cpu $startdir/pkg/usr/src/linux-$_kernver/arch/$KARCH/
fi
cp arch/$KARCH/kernel/asm-offsets.s $startdir/pkg/usr/src/linux-$_kernver/arch/$KARCH/kernel/
# add headers for lirc package
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/drivers/media/video
cp drivers/media/video/*.h $startdir/pkg/usr/src/linux-$_kernver/drivers/media/video/
for i in bt8xx cpia2 cx25840 cx88 em28xx et61x251 pwc saa7134 sn9c102 usbvideo zc0301
do
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/drivers/media/video/$i
cp -a drivers/media/video/$i/*.h $startdir/pkg/usr/src/linux-$_kernver/drivers/media/video/$i
done
# add dm headers
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/drivers/md
cp drivers/md/*.h $startdir/pkg/usr/src/linux-$_kernver/drivers/md
# add inotify.h
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/include/linux
cp include/linux/inotify.h $startdir/pkg/usr/src/linux-$_kernver/include/linux/
# add CLUSTERIP file for iptables
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/net/ipv4/netfilter/
cp net/ipv4/netfilter/ipt_CLUSTERIP.c $startdir/pkg/usr/src/linux-$_kernver/net/ipv4/netfilter/
# add wireless headers
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/net/mac80211/
cp net/mac80211/*.h $startdir/pkg/usr/src/linux-$_kernver/net/mac80211/
# add xfs and shmem for aufs building
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/fs/xfs
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/mm
cp fs/xfs/xfs_sb.h $startdir/pkg/usr/src/linux-$_kernver/fs/xfs/xfs_sb.h
cp mm/shmem.c $startdir/pkg/usr/src/linux-$_kernver/mm/shmem.c
# add vmlinux
cp vmlinux $startdir/pkg/usr/src/linux-$_kernver
# copy in Kconfig files
for i in $(find . -name "Kconfig*")
do
mkdir -p $startdir/pkg/usr/src/linux-$_kernver/$(echo $i | sed 's|/Kconfig.*||')
cp $i $startdir/pkg/usr/src/linux-$_kernver/$i
done
cd $startdir/pkg/usr/src/linux-$_kernver/include && ln -s asm-$KARCH asm
chown -R root.root $startdir/pkg/usr/src/linux-$_kernver
find $startdir/pkg/usr/src/linux-$_kernver -type d -exec chmod 755 {} \;
cd $startdir/pkg/lib/modules/$_kernver && (rm -f source build; ln -sf ../../../usr/src/linux-$_kernver build)
# install fallback mkinitcpio.conf file and preset file for kernel
install -m644 -D $startdir/src/$pkgname.preset $startdir/pkg/etc/mkinitcpio.d/$pkgname.preset || return 1
install -m644 -D $startdir/src/mkinitcpio-$pkgname.conf $startdir/pkg/etc/mkinitcpio.d/$pkgname-fallback.conf || return 1
# set correct depmod command for install
sed -i -e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" $startdir/$pkgname.install
echo -e "# DO NOT EDIT THIS FILE\nALL_kver='${_kernver}'" > $startdir/pkg/etc/mkinitcpio.d/$pkgname.kver
if [ "$keep_source_code" = "0" ]; then
# remove unneeded architectures
rm -rf $startdir/pkg/usr/src/linux-$_kernver/arch/{alpha,arm,arm26,avr32,blackfin,cris,frv,h8300,ia64,m32r,m68k,m68knommu,mips,mn10300,parisc,powerpc,ppc,s390,sh,sh64,sparc,sparc64,um,v850,xtensa}
fi
# Delete firmware directory
rm -rf ${pkgdir}/lib/firmware
FOR NVIDIA USERS:- Currently (22-Sep-09) nvidia drivers cannot compile on the above kernel. I have uploaded the following package - nvidia-beta-ice-rt which applies the appropriate patches to the latest nvidia-beta non-free drivers to allow them to compile on this RT kernel. Please post bug-reports here or in the comments.
Last edited by ngoonee (2009-11-10 04:09:53)

We are now at 2.6.31. No working rt patch for 2.6.30 was found, so this is the first new RT patch in kernel26-ice in 3 months. I'm downloading the sources now, if the compile goes fine I'll paste the PKGBUILD in the OP. This is so that, if in future kernel versions when -ice moves ahead -rt is left behind there will be a reference PKGBUILD for those who still want the RT kernel.
I've considered doing an AUR package, but there's already one old one by Fackamoto i believe, so unless that is orphaned this topic will be the 'distribution' channel for RT via kernel26-ice.
EDIT: Does not work, the patch is for rc8 and I believe there have been changes since then. Will continue trying for when new patches are forthcoming.
Last edited by ngoonee (2009-09-14 01:45:50)

My WIFI keeps on disconnecting and even after reporting and suggestion by support the phone hasnt been replaced or repaired under warranty

I think I have had enough. So its been a long time back and forth between me and you. Since I am not getting any solution and same thing you guys are providing me again and again.
I want to take a step back and list down a few things which have happened so far :-
I started chatting with the apple support on this issue starting September - please refer back to your chats on this Serial Number.
I have factory reset my phone like 20 times since then as each time they asked me to follow few steps which made me loose my data as your icloud doesn't work properly as stated by your customer care support people itself that sometimes the back up doesn't happen so please take back up at your laptop too.
Send phone diagnostics by clicking on a link.
reset your WIFI settings
Call apple support after 24 hours of observation.
Next day when same issue occurs then extreme Apology.
Take Back up on computer and Icloud both and contact apple support once its done
Call apple support again.
Factory Reset by erase all contents and setting options. Once one call back again.
wait and analyse for a whole day after setting up apple ID and data.
Wifi Issue stil exists.
Call apple support again
Between all this I had to explain the issue each time to a new representative. This above process I have gone through at least 7-8 times. Please go and refer your call notes.
So finally i got to know after escalating it several times and one of your supervisors told me that the issue is a hardware issue and it can only be replaced as they have tried it all.
Supervisor assured me that he has recommended it to be replaced in notes and asked me to visit a center.
I called in local distributor and set up an appointment, unfortunately couldnt make it. So call them to reschedule as I am working women so i dont have all the time in life to keep interacting with associate after associate so thought of walking in to an apple store near by and lodge a complaint. The supervisor updated me that I have warranty left and it will be replaced without any cost and also if i report and issue in warranty and if apple is not able to resolve it so the warranty stands true until its completely resolved after customer's consent.
I went in to give my phone to the tech support and they kept it for analysis and came back saying the issue doesnt exist. I was getting a disconnection in my WIFI every now and then. My Data plan was always used and i fortunately have a proof of that.
Customer rep told me talk to apple support and if they say we will replace it. One more place added where customer has to go.
Now and back to square one - They say phone is damaged - we cant replace it. First of all the phone is not damaged and you guys are just finding reasons to not replace a faulty phone.
It randomly disconnects and its listed as a known issue on your website too. had this not been listed i would have never thought its the phone. Then I started to observe that its the phone that makes a disconnection and not the WIFI connections as it was everywhere home, office and at friends place.
Best i can do is call you guys when this happens if you guys promise me that the tech employee of apple can come to whatever location i suggest at that point and do not be surprised if the phone behaves normal when the person arrives as its random.
Now you want pictures of my phone and you want to analyse further.

After making an appointment and waiting over a week I was a few minutes late for my appointment I was told by apple I would have to make a new appointment. The shop was Chatswood in Sydney and the manager Mathew was very pathetic. I travelled 1 hour each way and was treated very poorly I must comment and say this was my first Apple devices and I will never understand how come people are buying these devices. The apps seem really good if only the hardware and the support could match. I really wish this manager all his best to Matthew in his next position somewhere else he obviously should not be in the position of managing an Apple store.

BPM 11G comments and file attachments issue on human tasks

Hi all,
We have used JDeveloper 11G and SOA suite 11G + BPM (with PS1,PS2) to create and deploy a simple BPM process. The process consists of two swim-lanes ( Business Analyst and Snr Executive). The BA swim-lane has a human task which which initiates the process and the second swim-lane (SE) has a voting task. Both forms were auto generated.
------ Process steps ----
step 1. The initiator of the process( Business analyst) submits a document and adds comments on the form. (1st swim lane)
step 2. The task is received by the Snr Executive group and they need to accept or reject the document.
step 3. If any of the Snr Execs rejects the document, the process flow goes back to the Business analyst(the requester or initiator) for review.
(the voting group is able to share comments and the file attachments).
step 4. The business analyst receives a task on her list. This task list should have the comments made by the Snr Execs who rejected the document. ---This is where we are having a problem. The business Analyst, receives the task, but the document and comments are not updated. This still shows the original document and comments, she sent when initiating the process.
We have opened a SR with My Oracle support and it was suggested we apply a hot fix 9958661, which was done (see output below). Unfortunately this did not solve the problem.
Questions:
1. Is the default behavior of BPM 11G ?
2. How can we change this behavior to do what we want ?
---------------------------------------opatch update output -----------------------------------------------------------
ApplySession adding interim patch '9958661' to inventory
Verifying the update...
Inventory check OK: Patch ID 9958661 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 9958661 are present in Oracle Home.
The local system has been patched and can be restarted
I any suggestions would be welcome.
Thanks
Mocheche

Ok, this is what i did:
- I have a Process Data Object called CustomComments with just 1 attribute called comments.
- I have added that object to my user screens (adf page)
- Changed its columns att to 65 and rows to 8 (i chose that layout)
- Used a tableLayout to add an icon next to this text area to allow the user to add comments:
<af:commandImageLink shortDesc="addCommentImage" id="addCommentImage" partialSubmit="true" icon="/hw_images/new_ena.png">
     <af:clientListener method="myFunction" type="click"/>
     <af:clientAttribute name="attributeName" value="attributeValue"/>
</af:commandImageLink>
I use that clientAttribute to send the logged user to the javascipt.
- I added this after the af:document on top of the page to make the customComments readonly to the user (you need to do it here because if you set it in the properties the element is not updated later), so the user has to use the button i put to add comments:
<f:facet name="metaContainer">
     <f:facet name="metaContainer">
     <af:resource type="javascript">
          function readOnly(){
               var comms = document.getElementById("it1::content");
               comms.setAttribute("readOnly","true")
     </af:resource>
</f:facet>
<af:clientListener method="readOnly" type="load"/>
- Somewhere i added the javascript the commandLink calls:
<trh:script id="myScripts">
     function addComment(evt){
          var commentArea = document.getElementById("it1::content");
var user = evt.getSource().getProperty("user");
var comm = prompt("Please enter your comment: ","");
          if (comm != null) {
               if (comm != ""){
                    if (commentArea.value !=""){commentArea.value = commentArea.value + "\n"}
                    commentArea.value = commentArea.value + "user.value" + " : " + comm;
</trh:script>
After all this, you have an object that carries the comments from one screen (UI project) to another and is updated each time.
I know it may not be the perfect solution and that it could be improved a lot, but so far it does what i need so i use it.
If there is anything i wasnt clear enough, please let me know. Hope this helps.

Comment and Markup Toolbar

The file I'm proofreading is not allowing me access to the Comments and Markup toolbar. The bar itself is "greyed out" and I can't make any of the editing changes to the pdf as I normally would. The only difference I see with this file is the messages "You are viewing this document in PDF/A mode"-- is this preventing me access the C&M toolbar? Any suggestions as to how I could get this toolbar back?

You can turn off PDF/A mode in perferences: Edit > Preferences > Documents > PDF/A View Mode > Never
Once you're done editing, you shold probably set it back.

Question about kernel26-ice User/Environment defined variables[SOLVED]

Kernel26-ice PKGBUILD has further 'User/Environment defined variables':
bfs_scheduler=${bfs_scheduler:-0}
keep_source_code=${keep_source_code:-0}
menuconfig=${menuconfig:-0}
realtime_patch=${realtime_patch:-0}
use_config_gz=${use_config_gz:-0}
enable_reiser4
Well, I know only reiser4 option. What does it mean each one? And I can use all options together?
Last edited by noMaster (2010-03-09 00:58:50)

The BFS scheduler and real-time patch are kernel patches. An explanation of BFS can be found on Con Kolivas' site, RT is described in the Real-Time Linux Wiki.
'keep_source-code' lets you keep the source code after building the kernel, instead of throwing everything away, 'menuconfig' lets you change kernel settings and included drivers, etc., using an easy-to-use console interface and enabling 'use_config_gz' takes the configuration settings from the currently running kernel.

"Scene", "Description", "Comment", and "Log Note" metadata fields don't appear in Prelude

Can I use the "Scene", "Description", "Comment", and "Log Note" metadata fields in Prelude that are basic parts of Premiere's logging screen? I can't find them in Prelude.
I would like to continue in the Premiere (CS6) workflow I have been using of adding a Scene, Description, Comment, and Log Note. These are front and center in Premiere for logging. Yet, nowhere to be found in Prelude. As far as I can tell, all of the rest of the metadata categories will transfer. It seems that these should be in the "basic" group in Prelude, but don't appear.

I have a similar problem, but it gets weird.
I have been very very happy with the whole 'cloud' computing thing and keeping my stuff at Google. Contacts and Calendar worked flawlessly since I bought the Pre.
However, last week, I had to do a full erase of my Pre (UK-O2) because no apps would install.
I logged into my Palm Profile on the phone; logged into my Google account just after, and checked my Calendar and Contacts.
Calendar - all fine, just a few cosmetic tweaks of the colours. Good.
Contacts - not fine. Only 19 of 58 were imported from Google, and none of them had their photos. So I hit the Sync Now button a few times - with and without WiFi - with and without 3G - but that did not help.
So I waited for it to do it itself. No change.
So I did some searching on the web. I checked that all the contacts were in 'My Contacts' at Google... yes. I removed the Google Contacts account from the Pre. Then added it back again.
Weird bit coming up.... exactly the same 19 contacts were added as before!
I am at a loss really. I have even tried creating a 'googlemail' account because a web page suggested it and logging in with that.
No change. Still 19 contacts not 58.
Also, I cannot add a contact directly in the Pre and have it whizz off to Google HQ like before. This now does not work.
H E L P !
********* I will try the suggestion above and report back soon ******
Paully

Comments and advises needed

Hi
Apreciate if anyone here could help to comments and give suggestions for women's clothing site http://www.unique-women-clothing.com . I am trying to improve my bounce rate and one other annoying problem I have is that some alignment problem when view from IE and Firefox.
Regards
A O
De Fanci
[signature deleted by host]

Hi,
This seems to be fixed, maybe my laptop had a temporary error.
One more thing - you have a slideshow of photos with music on your homepage - I click it every time I visit the site, but it takes me elsewhere, it can cause you to loose many visitors I think.
Martin
Virtual office address

Kernel26-ice comments and suggestions

Similar Messages

Maybe you are looking for