Key Board Mapping for the Shift Key

I hope this is the correct place to post.
I just tried to use Ukelele to change my ` key into a 'shift' key but could not do it. Please note that I was not trying to change the 'shift' key itself, but was trying to turn the ` key into an extra 'shift'.
The reason I want to do this is because on this european macbook they make room for the ` key by robbing you of half of the standard shift key you get on a US keyboard.
Stretching out with my little finger across this useless key has given me repetitive strain and I am one hurting unit at the moment.
I would be eternally grateful for any advice.

Sorry, I did not Express correctly my requirements.
I did not Ask For the Key Board Equvalent.
In Forms 9i pressing F9 did not bring the attached LOV, i have to select the same from Menu. In order to avert the user to select From Menu. I want to Define F9 Funtion Globally to relfect in all forms through Key Borad Mapping.
Is it Possible?

Similar Messages

Executed as user: ADMIN\abc-SQLServer. Linked servers cannot be used under impersonation without a mapping for the impersonated login. [SQLSTATE 42000] (Error 7437). The step failed.

Hi All,
We have verified permissions on both sides,current server and linked server, the user has sysadmin.
Another key piece of information is that this is happening when executing a SQL Job.
Thanks.

Related:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/328616e9-42cb-40d7-a4b1-671d6a492d8f/linked-servers-cannot-be-used-under-impersonation-without-a-mapping-for-the-impersonated-login?forum=sqldatabaseengine
https://support.microsoft.com/kb/2492477?wa=wsignin1.0
http://sshakespeareblog.co.uk/2013/07/31/sql-linked-server-and-sql-server-agent/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Connecting to EMS fails with No mapping for the Unicode character exists in the target multi-byte code page

I am getting the following error when trying to connect to both my exchange servers.
New-PSSession : [ex2013-002.nafa.ca] Connecting to remote server ex2013-002.nafa.ca failed with the following error
message : No mapping for the Unicode character exists in the target multi-byte code page. For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:12
+ $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri ht ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : 1113,PSSessionOpenFailed
EMS used to connect ok. I am not sure if there is any connection but Outlook was installed recently on the exchange server to enable mailbox level backups.
Any help would be appreciated.
Steve Hurst

Hello Steve,
Firstly, you cannot install Outlook with Exchange because they share certain dll files.
About the EMS question, I suggest we try rebuilding the powershell virtual directory. If it still does not work, check the application log for more referernce.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

No mapping for the Unicode character exists in the target multi-byte code page

hi,
i have an issue with sharepoint 2013 and IE 10.
im using the sharepoint rest web service and make an ajax data call to retrive data from sharepoint lists, the call fail and return a server error: "No mapping for the Unicode character exists in the target multi-byte code page".
i have to say that everything works fine with chrome and firefox.
what can i do for fixing it?
Thanks a lot
alon

Hi,
From your description, I know you get an issue with IE 10 in SharePoint 2013 when you use SharePoint REST API to retrieve data from SharePoint list.
I am not quite sure what cause your issue. Could you provide your code, so I could test it in my environment and troubleshoot for you.
In addition, you could test your issue in another computer or another version of IE.
Best Regards
Vincent Han
TechNet Community Support

How to do Mapping for the following Scenario

Hi All,
I am doing File 2 File Multimapping Scenario with out using BPM Concept but, My result was Struck at Message Mapping.
Source                          Target
Message                       Message1     Details                                Details
         Name                            Name
         ID                                  ID
Message2
                                                Details
                                                    Name
                                                    ID
I am getting Runtime Exception at Message Transfermation error if i do the one 2 one direct mapping....
so, How to do the Mapping for thei Scenario?
WIth Regards,
Mahesh

Hi Farooq,
I am using Split and Merge.
Source XML
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/SplitAndMerge" targetNamespace="http://sap.com/xi/XI/SplitAndMerge">
<xsd:import namespace="http://tcs.com/Demo" />
<xsd:element xmlns:p0="http://tcs.com/Demo" name="Messages">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Message1" form="qualified">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="p0:BPM_In_MT" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Target XML
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/SplitAndMerge" targetNamespace="http://sap.com/xi/XI/SplitAndMerge">
<xsd:import namespace="http://tcs.com/Demo" />
<xsd:element xmlns:p0="http://tcs.com/Demo" name="Messages">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Message1" form="qualified">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="p0:BPM_Out_MT" minOccurs="0" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Message2" form="qualified">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="p0:BPM_Out1_MT" minOccurs="0" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Thanks
Mahesh

MAP for the material in material master

Hi All
I have problem in moving average price of a model in material master
Example.
Material - ABC in material master
Moving average price - $10
total stock- 5 Toatl Value--$50
now i have sub con Po for material ABC(header) 10 Qty and item material DEF 10 Qty
Net price for header is Zero here. but item material price will be $10
after making the Gr for the sub con Po is the moving price of material ABC need to change as shown below or remains same.
Moving average price - $10
total stock- 510 Toatl Value--$50100
Thanks
Regards
Manju

hi,
u have done subc po for which material , its raw mat or semifin or finished
if u have created s po for semi material then, when u made gr then the material price will change as map is maintained in the material master.
but if it is finished product then the price of the material is same, bcs, standard price should be maintain in material master.
hope, this will clarify ur question,
regards,
susanta

Mapping for the interfaces

Hi all !
I am new to interfaces and as a functional cosultant I have to do couple of functional specs for the interfaces and also the mapping ...what should be my approach
1, let's say I have to do the mappin for the Lcokbox interface( EDI 823) .....what should I have to exactly do in here?
2. another example would be I need to grab required data from a third party tool into the credit master data on the cutomer ... how can I do this ...
Please some one explain me in detail the above two cases , so I can get a clear understanding and start from there.....
hoping couple of answers....thanks a lot in advance for anykind of help

Hello
In simple words, an interface is a 3rd party software. SAP and this software exchange data in 2 way channel.In layman's words, we need a program which can download data and process and record in SAP.
Also, we need a program to send data to the external interface.
First draw the process flow / how and what data is involved. Make a visio diagram.
Let the technical guys have a look at it and decide on what business partners like XI need to be used.
Let them decide on the channels by which data can flow.
Now look at the available data in the 3rd party, study their fields and check relevance in SAP. The out come of this excercise is mapping data for smooth flow and compatability.
Now let the ABAPers sit and prepare download / upload program and and link both the systems.
The data is in the form of files, which are either manually uploaded or triggered by scheduled jobs. The interface program should facilitate both features.
Reg
assign points if useful

When i get boarding passes for the airline a second pop up page opens up but there is no print option

when i make a reservation on an airline website a separate page opens up for the boarding passes. there is no options at the top of the page for anything and there is no print option anywhere including on the page itself

yes but how do i set up mozilla so that any pages that open have the toolbars on top. also if you know, once you decline the option of a password on a site if you change your mind how do you save a password since the option don't come up again

Is there a trick when you configure MAPI for the mail system in Central Pro?

Hi,
I'm using Central Pro 5.6 on Windows 2003 and It is working fine, but I need to change the configuration for the email system. I'm using SMTP, but I need to use MAPI.
In the documentation says that I only need the user=profile name and that's it. But this doesn't work. I have this error:
2011/03/31 17:13:38 C:\Program Files\Adobe\Central\Bin\jfemsend: Logon failed...
Do I need to do something else??
Thank you.

Hi,
I'm using Central Pro 5.6 on Windows 2003 and It is working fine, but I need to change the configuration for the email system. I'm using SMTP, but I need to use MAPI.
In the documentation says that I only need the user=profile name and that's it. But this doesn't work. I have this error:
2011/03/31 17:13:38 C:\Program Files\Adobe\Central\Bin\jfemsend: Logon failed...
Do I need to do something else??
Thank you.

Will there be a new LGA 2011 board(s) for the release of IB-E?

As the topic suggests.
I'm planning a new build and would like to know.
Cheers :D

Don't get your hopes up. Initially, DDR4 will be too expensive and too slow to justify the jump over DDR3. It'll be the next high end platform (the X99 successor) that will be considerably faster compared to DDR3 platforms. It's like the DDR to DDR2 and DDR2 to DDR3 switches. Major performance increases happened a couple of years after the new interface surfaced.
X99 will use many SATA 6Gbps ports but until then there will be cheaper SATA 12Gbps expansion cards on the market. Not to mention that using more than 2 of them is very unlikely. HDDs are hardly reaching 1.5Gbps and you won't need more than 2 SSDs on a typical system. If the system is not typical then it will either use 12Gbps SATA or PCIe SSDs, so again the 6Gbps ports will not be needed.
The PCIe 3 fiasco is NVIDIA's mess and has nothing to do with limitations of X79 and SB-E processors.
Essentially, the only reason to get X99 will be the support for 8 to 12 core Haswell-E desktop processors. But those will most likely be overpriced (1000$+).
Unfortunately Ivy Bridge-E desktop processors (out around this November) won't likely come in more than 6 cores. Unlike the server parts that will have up to 12 cores.
Haswell-E and X99 are expected to come out near November 2014. That's about one year and half from now. So waiting until then is not advised.
All in all, X79 and Sandy Bridge-E lasted way more than I thought. They'll stay 2 full years since their release at the top of desktop platforms until IB-E comes out and steals the first place in performance. Then after 1 year Haswell-E will ditch it to 3rd place, maybe 4th counting the Haswell refresh for LGA1150.
LGA2011 seems to be on par with LGA1366 in regards to longevity.
LGA1366 processors offered a greater performance boost over similar core 2 processors. The problem was that the major boost the 970 gave over quad core processors came at a very high price and came two years after the platform was released, and when the 980 came out SB-E was just around the corner.
Still, even 5 years later, a quad core 920 is fast enough to run every software currently out at reasonably high settings.
LGA2011 processors offer a less significant performance boost over similar LGA1366 processors, but the cost is far lower for the hexa-core released together with X79, while the LGA1366 equivalents were either too expensive or came out near the end of the platform's life. You also have more PCIe lanes with double the speed per lane. The greater over-clocking potential of SB-E is also a plus.
Judging from the current trends, it seems that early LGA1366 processors like the 920 will be enough for everything until around 2014-2015, and late hexa-core ones until around 2017-2018. That's like freaking 10 years since the platform came out!
LGA2011 processors will last about 5 years longer due to typical performance increases on new processors, and due to the inclusion of AVX instructions on them leaving major overhead for application performance optimizations (it's as important as SSE was for Pentium 3). That's also like 10 years until LGA2011 came out, maybe 12-15 if octa-core (or faster) IB-E desktop processors come out.
Technological advancements happen at a lower pace these years. Long gone are the days where every next year processor performance was doubled. Back then you needed a new PC every 2 years. I guess that I prefer the current situation. :p
Anyway, this post went a little overboard. To answer the poster's question... I'd say that MSI will get new X79 boards out in order to have "out of the box" Ivy Bridge-E capable boards out on the market. No current boards will support IB-E until their BIOS is updated, which is quite pointless if you need to buy an old processor in order to make the new one you bought compatible.
If you have a way to update the board BIOS to get the board ready for IB-E then by all means, get one of the MSI boards already out. The 8 DIMM versions of the X79A GD45 and GD65 boards from MSI are amongst the most reliable boards out there, even compared to the boards of other platforms (LGA 1155, 1150, AM3, etc).
Now, I don't say that there can't be defective boards, just that the chances of getting a defective board are far lower compared to the rest. The reliability of those boards when they are stressed is also better than on the rest.
Cheers! :D

User mapping for the B2B Internet Sales on the Portal environment

Dear All,
We implement a B2B Internet Sales scenario and we use a SAP CRM 4 system as also a SAP Enterprise Portal 6. The problem we have is the following.
On the portal environment we maintain the SAP CRM as system and we have maintained the user mapping between the portal and the CRM users. The portal users have access on standard SAP transaction like for example the BP, etc. We try to give also access using the SSO functionality on the B2B Internet Sales and the problem on this case is that the Portal user have no the same mapping because on the B2B web site the system uses different user ids. For example I logon on the SAP CRM system with user iq000001 but on the B2B Internet Sales I logon with the user-id 45311.
Does anyone an idea how I can solve this problem ?
Thanks in advance

Dear Tiest,
Thanks for your reply. So, your answer is correct because when I maintain an internet user for example I use the BP transaction (Business Partner Management) and when I choose the Internet User role then I maintain all the relevant data (user name, alias, etc). The system as you know, automatically creates also an SAP user.
About your alternative way to create the users using the XCM user administration tool, I have no idea how I will manage the process. Do you have any documentation about that ?
Thanks in advance

When can we buy european maps for the 6110 navigat...

Hi there,
Does any people knows when we can buy maps for europe for the 6110 navigator?
And where from?
Thanks!

Hi there.
Thanks for your reply.
I can't do that with my phone - that option doesn't work.
I've got an early version of the phone operating system software and it won't let me.
Do you mean www.66.com ? That won't let me either.
The weird thing is, when I go to www.66.com using the Nokia Map Manager, it allows me to download the maps I want, but won't let me pay for them or unlock them....and I've looked.
Hmm.

Domain mapping for the portal URL | URGENT

Hi ,
The project is expected to go live in 10 days .The user would be accessing the portal with the URL http://domain.company.com and <b>NOT</b> by http://domain:50000/irj/portal . I need to figure out how can we do that .
We have a WAN network and a public ip has been assigned to the portal production server .We have a company domain reserved to be used for portal server .
What will be required to be done on the portal side or anywhere else for the URL http://domain.company.com to translate to http://domain:50000/irj/portal
Regards
Deepak Singh

Hi Deepak,
You can achieve this by setting up Reverse Proxy in your DMZ such that all internet request hit the reverse proxy server and that re-routes request to your Portal server.
If you want to avoid all these, you can use Html Redirection or Java Script redirection features.
a. Point your request https://abc.comp.com to this html file which would inturn redirect to abc.comp.com:50001/irj/portal.
Also refer my links in this thread
Opening EP6.0 access from the Internet
Hope this helps
Regards,
venkat.
[Pls reward points if useful]

Key board viewer for the font tamil 99 is not the same for iPad and macbook pro, why?

I have ipad 2 and macbook pro purchased in the year 2014. The character viewer for both iPad and mac book is different causing difficulties while typing. Is this issue can be resolved?

If you created your book with iBooks Author, such books can only be read on an iPad or on a Mac running Mavericks or later.
If you want your book to be available on the iPhone, you have to create it in .epub format. The Apple app for that is Pages.

Are the key board docks for the Helix......

Available for purchase separately? It seems like a common problem, that I personally am getting tired of. Today is only the second time I've had to reset my keyboard docking for my helix, but that's enough for me. I've downloaded and updated the software as well, and I'm still having problems with it.
Does anyone know if I can simply buy a new keyboard dock? If so, please advise. THANKS!

Hi Gabriel,
Acrobat 11 currently supports PKCS # 12 i.e certificates with extensions .p12 or .pfx
.p7b is a PKCS # 7 standard file.
Regards,
Rave

Key Board Mapping for the Shift Key

Similar Messages

Maybe you are looking for