Key date not work in query on infoset

hi experts,
i have a infoset, which includes a time-dependent infoobject eg.0employee and an ods eg. ods1
i set the ods time-dependent by setting from ods1-field1 to ods2-field2, and link the 0employee to ods1.
then i create a query on the infoset and set a key date in the query, eg20061231.
but the query result goes wrong, the key date doesn't work, the result shows below:
employ1 1000.12.31-2008.01.01   $123 (this record is right,because i want the key date to be 20061232)
employ1 2008.01.02-9999.12.31   $123 (but this record should not be displayed)
i haven't set any field in infoset to be key date, just set the "from" and "to".
pls help and thanks a lot!

Hi
Check the link.
http://help.sap.com/saphelp_nw04/Helpdata/EN/11/723c3b35703079e10000000a114084/content.htm
Chandu.

Similar Messages

  • Key Date variable; Interval in query properties for Time Dep. Masterdata

    Hi,
    I've been searching on the forum, and I think I know the answer already, but still I'd like
    to ask you all whether it's possible to create a Key Date Interval variable to be used in the query properties.
    As far as I can see you can only report by a single key date used in the query properties field for time dependant masterdata, but my customer has asked me to investigate the possibility to enter a date range.
    As all masterdata is time dependant I don't see how this would work, but if someone can shine a light on this maybe there is a solution available?
    Thanks for your help.
    M.

    Hi marc
    I understand your problem.
    I had an idea for a workaround.
    If you can create master data compounded with Valid from and Valid to both of these characteristics , how the query is computing
    the keyfigures.
    Every change in valid from or valid to is unique for the system in this case.
    Thanks
    N.Ganesh

  • My laptop keyboard is having problems. I took it if to change my bottom case it worked fine prior and then after just the power key worked. I cleaned everything nothing is bent in the cable. now my power key is not working

    Hi my keyboard is not working I took off the bottom case to change it prior my keyboard was fine and after just the power key worked. I checked everything no portions were bent and it plugged in good. I tried to turn it on this morning and now the power key doors not work??

    Back up all data.
    Triple-click anywhere in the line below to select it:
    pmset -g assertions
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.

  • Some Keys are not working on Lenovo G570

    Hello all
    I am new here, looking for some help regarding my Lenovo G570.
    Yesterday, it was working perfectly, I properly shut is down. I have set a BIOS pasword.
    Today, when I switch it on, I was unable to type the pasword becasu some keys were not working. However, I managed to loged in with the help of On Screen Keyboard. After analysing it, I came to know that some keys on numpad includeing 0,2 and on the 2nd line(vertical numerical keys) 1,2,3,4,7,8,9,0 are not working. I tried to re-install the OS but I set a BIOS paswoed containing one of the missing keys.
    Please let me know whether it is a software problem or should i take my laptop to some repairing shop?
    Thanks  
    Solved!
    Go to Solution.

    Hi Asadkhan92,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing an issue with the keyboard in your Lenovo G570 laptop.
    As you have mentioned that the some keys are not working in your laptop, as you have also mentioned that the onscreen keyboard is working, please connect the external keyboard and check  for the issue, this is to confirm if the issue with the hardware or software.
    If the external keyboard works fine and if the keypad is not working then it’s a issue with the keypad of the laptop.  
    Please visit the nearest service centre for further details.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Hope this helps! 
    Best regards,
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Mbp numerical keys are not working

    my macbook pro was using last one year now the numerical keys are not working find a solution

    It sounds like what I have seen multiple times on a device with moisture damage.
    Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out.
    It really is more common than you think.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    3. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    *Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Warning: untrusted X11 forwarding setup failed: xauth key data not generate

    Upon connecting to a RedHat Enterprise Linux server via ssh -X I get the following:
    Warning: untrusted X11 forwarding setup failed: xauth key data not generated
    Warning: No xauth data; using fake authentication data for X11 forwarding.
    I have previously (as in last week, ending 11/1/2008) been able to use x11 forwarding from the machine I'm trying to connect to. This problem also occurs with other servers, meaning it must be a problem with my local machine. Any suggestions are welcome.

    I get that if I use
    ssh -Y ...
    but NOT with -X.
    Do you have a $HOME/.ssh/config or /etc/ssh_config file that is specifying ForwardX11Trusted?
    Mostly I ignore the message when I get it as, my X11 forwarding works OK, AND I'm in an environment where my fellow employees could do much naster things to me (and get fired for it), than spoofing my X11 sessions.

  • Lumia 720z vol down key izz not working properly

    Frm last few ,my fone vol down key izz not working properly,i tried my best but getting no good result

    Since purchase i have been visiting Nokia Care 3 times for the same Volume key issue.
    No satisfactory solution keeps on occuring now again same issue.Care personel says use it this time n will see got irritate with such replies Nokia Plz respond Act on this issue.
    jimmyireland wrote:
    Have you tried rebooting the device or trying a hard reset?
    The hard reset will wipe all your data.
    To do this-Go to - Settings-About-Reset your phone.
    If this fails return device to point of purchase or a nokia care center.

  • QT Pro WinXP - key is not working

    I just bought an upgrade to QT Pro WinXP but the key is not working. I have search Apple's site and find no way to get help from Apple. Anyone got a clue? (Yes, I have used the right license key, yes I have the right version 7.1)

    I tried that and it did not work.  The paid functions are still grayed out.
    There are three possibilities here:
    1) The QT 7 Pro is not activated. In this case, the registration window will not display the QT logo with the word "Pro" superimposed on it, the phrase "QuickTime 7 Pro" will not be displayed below the "Registration Code:" entry, and the "Buy" button will not disappear. (I.e., I assume your version should look something like this if the code is accepted...)
    2) You don't have a movie clip loaded. Unless you load a movie, most of the QT 7 Pro features will be grayed out since their functions are often contextual and, therefore, dependent on the data loaded. Additionally, the file loaded must be QT compression and/or edit compatible. For instance, if you try to trim an MPEG-1 video, the associated controls/options are grayed out because QT recognizes that this compression format is not editable at the frame level.
    3) Your QT 7 Player application is corrupted/broken for some reason. In this case you would likely have to "extract" a copy of the player and replace the app in your Applications folder. However, this is a very rare chance of happening.
    So, at this point you must determine which specific problem you have.

  • The A key is not working and I can't lock my phone,

    The A key is not working  all other keys are working.  Updated software but still have the same problem.  This code also came up at around the same time ! uncaught exception: index 3 >=3.  Can anyone help.

    Hey Lizziebear,
    Welcome to the BlackBerry Support Community Forums.
    The uncaught exception error you're receiving can be resolved by performing a clean reload of the BlackBerry Device software.
    Follow all the steps in this KB article:  www.blackberry.com/btsc/KB11320
    Note:  Make sure you create a backup first as this will erase all your data.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • CURVE 8520 - KEYS ARE NOT WORKING

    Need assistance to guide as the qwerty pad, navigation and other keys are not working. when conncting the phone to laptop, the alarm confirmation appears and cannot cancel or open other file.
    already restart the phone and removed the memory card but still problem occurs.
    Solved!
    Go to Solution.

    Perfom a back up from your device information , the make an update if your device dont have any update make a force detection or just a reset of factory settings if the error continues you need a warranty replacement.
    Back up steps:
    For a backup of the data on a BlackBerry smartphone, complete the following steps:  
        Click on Device from the upper left-hand corner of the BlackBerry Desktop Software and select Back up from the drop-down list, or simply click Back Up Now from the main screen of the BlackBerry Desktop Software.
        Mark the appropriate customization level ( Full, Quick, Custom).
        If your smartphone includes built-in media storage and you want to back up data that is stored there, select the  Files saved on my built-in media storage check box.
        Input a file name if desired, or leave the default text.
        Leave the  Encrypt backup file unchecked.
        Select Back up.
    Update steps:
        Connect the smartphone to the computer.
        On the home screen of the BlackBerry Desktop Software, click Update.
            To download an update, click Get update.
            To view other available versions of the BlackBerry Device Software, click View other versions. If applicable, click another version. Click Install.
        Do any of the following:
            To keep a backup file of your smartphone data and settings, select the Back up your device data checkbox. This backup file is restored to the smartphone after the update is complete. If the data is not backed up, the smartphone data, settings, and email messages are deleted from the smartphone after the update is installed.
            To encrypt the backup data, click Encrypt backup file.
            Select the Keep me subscribed to email notifications checkbox to receive email updates when new versions of the BlackBerry Device Software become available.
        Click Install update.
    When the confirmation message that the update is complete is displayed, the BlackBerry smartphone may be disconnected.
    Force Detection :
    Remove the battery from the back of the BlackBerry smartphone.
    Connect the BlackBerry smartphone to the computer using a USB cable.
    Once prompted to Retry, Update or Cancel, click Update. If available updates are found Desktop Manager will prompt you to Get Update, Update Later or View other versions
    Click Get Update to install the recommended software version or View other Versions to manually select the version you wish to install and click Install.
    In the Update Options screen there is the option to enter the email address to be notified in future when there may be new software versions available.
        fill in the checkbox and enter the email address in the text field to receive email notifications
        uncheck the checkbox and leave the text field blank to not receive updates.
    Reinsert the Battery which was removed in step 1
    Click Install Update
    Reset Factory Settings steps:
        In the top right corner of the BlackBerry Desktop Software, click on the ? in the top right hand corner of the BlackBerry Desktop Software.
        Click Support Resources
        Then Support Tools
        Click the Reset button under the heading Reset to Factory Settings.
    Any question let me know.!

  • E72 Hanged and keys r not working

    Hi,
    My NOKIA E72 is hanged and keys r not working.... I m using latest fram ware.....
    when I switch on the phone it ask me for password (phone lock) but when I tried to enter the password the keys r not responding except 2,5,8, sys keys.... I hv tried again n again and also tried the removing battery... removing sim card.. alos by removing memor card... but the prblm is still der...
    I hv many important data in phone memory... plz help me for that...
    Thankx...
    Moderator's Note:
    Personal details removed by a moderator. We kindly ask you not to share your personal details such aws your fullname and location publicly on this forum. This is for your personal safety and privacy. Thank you for your understanding.

    @mumarfarooq
    Welcome to the forum!
    Presumably you have not previously backed up device with OVI Suite on PC or is device recognised by Bluetooth or USB?
    Happy to have helped forum with a Support Ratio = 42.5

  • My key does not work/Invalid Registration

    I have been trying for days to unlock Quick Time(QT) Pro, but my registration key does not work!!! I've done all possible requirements, I have copied and pasted my user name and the key code (so those are correct), I do the correct qualifications to run the software, I am using the QT control settings, and yes I do have QT 7.0.3. All my criterias meet to unlock QT Pro but I keep getting the message saying Invalid Registration. I've done all possible trouble shooting techniques given by Apple's tech support but I've simply have had no luck. To my understanding the key code has to be 5 sets of 4 numerical characters (20 characters long) but the one that I got from Apple is only 7 characters long. I've clicked on the link that retrieves a lost key but I get the same number. I try calling customer service but have had no luck in reaching a live operator. What do I do?

    Yea you are right, I am inputting the part number. However, I keep looking for the 20 character long key but there is nothing there in either the confirmation email or the invoice email that they sent me. I check the "Download History" on the Apple Store website but it only gives me the name QT Pro, the part number and the date that I purchased it. There is no 20 character long key given. Could they have not given me the key by accident? Like I said, event when I go to the link to retrieve my lost key, it gives me the same part number! Please help, its been more than a week and I am getting frustrated!!!

  • Convenience Keys and mute/play keys are not working on my curve 9300

    Convenience Keys and mute/play keys are not working on my curve 9300, can any one help to resove this issue? 

    Hey amghouri,
    Welcome to the BlackBerry® Support Community Forums.
    I would suggest backing up and doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test the keys before restoring any data to the device.
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Envy 14t 3000 (Product A1V79AV) running Windows 7. Beats button and Fn + b key do not work

    on Envy 14t 3000 (Product A1V79AV) running Windows 7 Professional. , Beats button and Fn+b keys do not work
    This question was solved.
    View Solution.

    Hi Ken,
    Try resetting the bios defaults as follows.
    Shut down the notebook.  Tap away at f10 as soon as you start the notebook to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Another option worth trying if the above doesn't help is a 'Forced Reset' ( this doesn't affect you data or operating system in any way ) - the method for your particular Model can be found on the following document.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03062890
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • F4 help key does not work in ESS on ITS in Portal

    Hello All,
    F4 help key is not working in all iviews in ESS in Portal.When i try to press it nothing happens and no pop up appears,kindly please suggest wt might be the cause of this error? Iam tired struggling with this issue and not able to trace out reason for the same.My Email Id is [email protected] .Plz revert at earliest.
    regards,
    Saumya

    Hi,
      This kind of problem is known when webgui is being started from an IAC, e.g. HRWPC_FC_EXEC
    You have to set parameter ~webgui_popups 1 in the service file of this IAC.
    BR,
    Disha.
    Pls reward points for helpful answers.

Maybe you are looking for