Key DAte

Hi ,
We ahve a Key date option in BEX Query designer i am assigning an Customer Exit variable to that key date which based on calander day. In the same Query iam using another customer exit which should be depend on the above Key figure can anyone will let me know how to do this..
means in CMOD i wrote a program for both the variable key date variable is converting fiscal year to date and month and after that second variable need to be exeucted
Note to both the customer exit iam passing the same variable..
Thanks

Hi Srinivas,
I am creating a reprot which is based on fiscal year period and the customer want to display the data based on periods.
Means if they select the period as 007.2008 then
Column 1 should display the data 001.2008 to 003.2008 and
column2 should display teh data 004.2008 to 006.2008
column3 should disply the data 007.2008
how to go head and their is the column where i ahve to disply current fiscal year data..
Thansk

Similar Messages

  • Currency Translation on Key Date for AR Aging

    Need your valuable advice!
    I have created an AR Aging query including both Open and Cleared Items based on 0FIAR_C03_Q0005 standard query. However the requirement is to do currency translation to Group Currency (USD) on Key Date. This Key date is defaulted to today but the user can change this to go back in time and pull all the ARs as of that back dated key date.
    I was planning to create a currency translation type on M rate based on the Key Date Variable in RSCUR. However I am confused on which variable to base this currency translation. I have several key date variables in my query such as 0P_KEYD2 (based on Posting Date), 0P_KEYDT (based on Net Due Date) and 0P_KEYD3 (based on Clearing Date).
    Which Key Date Variable should I use in 'Time Reference from Variable' field in RSCUR? Would it be one of the 3 mentioned above or something else and why?
    Appreciate your valuable advice.
    Thanks,
    Al

    Hi,
    Yes I do want to use the Key date from the variable screen and I am using the standard 0FIAR_C03_Q005 with slight modification including currency translation.
    As I mentioned in my original post I have several key date variables in this query such as 0P_KEYD2 (based on Posting Date), 0P_KEYDT (based on Net Due Date) and 0P_KEYD3 (based on Clearing Date). My question is which one should I use if I want to base it on the specific key date variable from the variable screen? I need the specific Key Date variable technical name.
    Thanks,
    Al

  • Table for Customer and vendor open balance on a key date

    Dear All,
    Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
    I have checked with the below table :
    Customer-KNC1, KNC3,BSID, BSAD
    Vendor-LFC1, LFC3, BSIK, BSAK.
    But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
    Plesae let me know, how to go for it.
    Please suggest.

    Hi
    Use BSID and BSIK for open items
    And pass company code, year and from date and to date range in Posting date selection option
    Reg
    Vishnu

  • Report Output with Key Date

    Dear All,
    I have the following fields in DSO.
    Key Part: EmployeeID, DateTo, DateFrom.
    Data Part: Designation, AnnualSalary.
    I have data in the DSO as follows:
    EmployeeID DateTo        DateFrom      Designation AnnualSalary
    1                 12.11.2008 01.01.2008    Worker        10000
    1                 31.12.9999 13.11.2008    Officer         20000
    2                 14.11.2008  01.01.2008    Worker        10000
    2                 31.12.9999  15.11.2008    Officer        20000
    Now If I give key date as 13.11.2008.
    The Output of the Report should be like this:
    EmployeeID Designation AnnualSalary
    1                 Officer         20000
    2                 Worker        10000
    How can I achive this ??
    Cheers,
    Neel.

    Hi,
    I think you can achieve this by using a formula with boolean operators "is less than" and "is greather than", and then also use row/columns settings and/or conditions to suppress rows that does not contain the key date.
    BR,
    Niclas

  • Key date in vendor ageing report

    hi,
    As i run the report S_ALR_87012077 which stands for vendor ageing report it shows
    Key date on the top right hand side of the report.
    Can any one tell me what does this Key Date stand for and from where it is getting picked up
    Thanks
    Parin

    S_ALR_87012078 - Due Date Analysis for Open Items
    You run the above report for due date analysis.
    Key date we will give manually for analysis on which date we want to take Open Items.

  • Open orders display in BEX report based on Key date

    Hello All,
    I have a requirement:
    We have an existing report which needs to have input selection as Key Date.
    The report should display the Open orders based on the key date mentioned.
    For Eg: if an item A was Opened on 20th Sept, 2010 and now CLEARED and if I run the ECC report today and mention the key date as 20th Sept, 2010, then the report will show me the item A status as OPEN
    Plz help me with the logic for the same at the earliest
    Tthanks..
    Sneha

    Hi Sneha,
    I assume you have open and crear dates in your query. So put an open date in your query filter and restrict it as less then Key date variable(which is a variable of type user-input on 0calday), then create another variable that feeds from keydate variable (it can be a replacement path or simplest user-exit).
    Note: the another variable is needed because as far as i can remember you cant use the same variable to restrict two different chars in the same query/anyway test if it's not possible - then create another variable as i mentioned.
    Take Cleardate in your query filter and restrict it as more than keydate variable andr # (not assigned). (in case if it hasnt been creared at all yet at the key date time)
    Pls let me know if this was helpfull

  • Is there a list of open items at key date per customer?

    Hello,
    In FBL5N you can get a list of open items for a customer at some specific date.
    I'm looking for a summarized list that would give me a list of sums  of open items for some customer per day, so I would see for example for one month what was the sum of open items for this customer on each day.
    Is there already some similar report in SAP?
    Thanks and best regards,
    David

    Hi,
    I still don't think we understand each other.
    If I run FBL5N I have option to select:
    - Items that are or were open at the key date are displayed on one date
    - All items posted on the posting date specified fromde date1 to date2.
    - Items that were cleared at the clearing date specified
    I would like a list of all items from option 1 (Items that are or were open at the key date are displayed on one date) so items that are or were STILL open and not yet cleared on one date, but not just for one date but for more days.
    If I use your suggestion I get what items opened or cleared on one day not how many items were still open on particular day.
    So a list of how many opened items were there at the day, and notjust items that were opened on that day but also all previous items that were not yet cleared at that day.

  • FBL5N - Invoice History by Open Items at Key Date

    Hi Experts.
    I have a doubt. Is it posible in FBL5N to get the invoice status information by " Open Items: Open at key date" ?
    e.g. if I change the baseline date or House Bank information in 08/25/2010 and I get the report using the date: 08/24/2010, how can I get the information in that date?
    In my case, the system always show the last change, and not the invoice situation in specific date.
    Thanks .

    Yes, The system dislays the data with the current details (After changes).
    For open item key date, it consider the posting date (Which can not be changes, once document is posted).
    Regards,
    Gaurav

  • AP Aging report - key date for user entry

    Hi All,
    We have a requirement to calculate aging buckets like 0-30,31-60,61-90...etc.
    I know the key date for this report is created on net due date in SAP standard report.
    In standard SAP report , key date is always a system date(SY-DATUM).
    What we need for this report is , we need to get all the invoices which are outstanding as of that date(the date which user enters).
    If user enters today's date(08/28/07) , he should get all the invoices outstanding till that date in aging buckets and if user enters some date in the past like 07/26/07, he should get all the invoices outstanding as of that date.
    Can  someone Pls tell me if aging buckets are calculated based on a user entry ?
    Regards,
    Kumar

    Hi Voodi,
    Aging in the standard report is being calculated like below...
    1.For open items
    Posting date<key date
    Item status = O
    2.Posting date < keydate and clearing date > key date and net due date with offsets on keydate ( key date + 1 - keydate+30 --- for 1-30 days) like wise for all aging buckets.
    in this scenarion , key date is always system date ie today's date.
    But user wants to get all the invoices based on his user entry...
    is this possible with the same standard key date variable or do we need implement any other logic???
    Regards,
    Kumar

  • FI-CA Open Items based on key date Business Content

    Hi,
    I am using BI content infocube 0FC_C07 to extract contract account open items data. Our requirement is to do the data load weekly basis based on key date.
    I have enhanced the extractor and i can see data for the enhanced fields in RSA3. But now, i am not sure how to load data into BI.
    At the infopackage level(PSA level)  there are 2 mandatory fields (DateID(LAUFD) and Additional Identification Characteristic(LAUFI)). Do i need to change the date every week manually? I have to create a process chain to automate the dataloads.
    Also, i need to use counters for Each unique Contract Account and Contract Account Document .
    For the contract Account Document number , i am thinking to us this formula(If contaract document item =1 then document counter =1 otherwise 0). But i am not sure how to count each single contract Account?
    Your advise will be appreciated.
    Thanks,
    Priya

    Hi Priya,
    Go to InfoPackage selection tab.
    Now in the Type select 6 which is for ABAP Routine.
    This will open the ABAP Editor.
    Write your code there.
    Sample code.
    data: l_idx like sy-tabix.
    DATA : from_date type sy-datum,
           to_date type sy-datum,
           month(2) type n.
    read table l_t_range with key
         fieldname = 'IDATU'.
    l_idx = sy-tabix.
    *if current date is suppose 14th April 2008, then this routine should
    *pick values from 1st jan 2008 till
    14th April 2008
    clear month.
    month = sy-datum+4(2).
    if month = '01'.
    month = '10'.
    endif.
    if month = '02'.
    month = '11'.
    endif.
    if month = '03'.
    month = '12'.
    endif.
    if month GT '03'.
    month = month - 3.
    endif.
    concatenate sy-datum+0(4) month '01' into to_date.
    l_t_range-low = to_date.
    l_t_range-high = sy-datum.
    l_t_range-sign = 'I'.
    l_t_range-option = 'BT'.
    modify l_t_range index l_idx.
    p_subrc = 0.

  • FBL5N - Open Item at key date

    Hi All
    For transcation FBL5N, for Open Item at key date, field name ALLGSTID which is a structure component, I want to know where actually the field value is stored, in which table.
    Regards
    AJ

    Hi,
    May be you can add the validation on clearing document in your query. e.g. <b>augbl <> SPACE .</b> ..
    And even if you are considering Invoices there are two different tables like
    BSIK or BSID - Open Items
    BSAK or BSAD - Cleared Items
    Hope this will solve your probelm.
    Assign points if it helps.
    -Gaurang

  • G/L account key date

    Hi Experts,
            I need to generte a report for open items in the G/L account , based on the 
    <b>key date field..</b>
    please guide me.. from which table i need to retrieve the data.
    Not based on posting date or document date.. it should be key date
    input parameters are : company code,
                                      house bank,
                                      key date.
    Thanks in Advance,
    Regards,
    Sabari.

    Hi Sabari,
           All the G/L accounts transaction details u can see the tables.
              BKPF : - Accounting Document header table.
              BSEG: - Accounting Document  Item table.
              BSIS - G/L Accounts
    Check the table BSIS.
    Hope its useful for you.
    Thanks and regards
    Nisar.

  • In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

    In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
    Thanks

    Hi,
    I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
    Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
    As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Default key date, Document date and posting date needs to be changed automa

    Hi Experts,
    The user wants to create a variant for Foreign currency valuation, wherein the default key date, Doc date and Posting date needs to be changed every month automatically. Is it possible?
    Please let me know your thoughts.
    Warm regards,
    Murukan Arunachalam

    Hi
    Please follow this process.
    Only specify fields that should be changed
    Select these fields by entering an X in the checkboxes
    Enter a U in the UPDATEFLAG field
    Always specify key fields when changing the data, including in the checkboxes
    The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
    Maintain quantities and dates in the schedule line data.
    1. Minimum entry:
    You must enter the order number in the SALESDOCUMENT structure.
    You must always enter key fields for changes.
    You must always specify the update indicator in the ORDER_HEADER_INX.
    2. Commit control:
    The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.

  • Crystal report -Subreports and BW key date

    Hope your in good spirits,  we had to install the SP 7 on bw for our webi reports to work, i have an issues here with Crystal reports
    I need to develope a crystal report with two BEx Queries as Data Sources, I suggested to use Subreports, where the promts of the reports can be linked, but i have a Keydates in these two Bex Queries which are poping up as two parameters when i run the report is there any way that you can link those to key dates,where the user can enter for one key date Parameter and the value is passed to the Sub report Key date  parameter, please help me

    >
    raj_4234 wrote:
    > Hope your in good spirits,  we had to install the SP 7 on bw for our webi reports to work, i have an issues here with Crystal reports
    >
    > I need to develope a crystal report with two BEx Queries as Data Sources, I suggested to use Subreports, where the promts of the reports can be linked, but i have a Keydates in these two Bex Queries which are poping up as two parameters when i run the report is there any way that you can link those to key dates,where the user can enter for one key date Parameter and the value is passed to the Sub report Key date  parameter, please help me
    did you manage get the solution, i also want to know how to share date parameter from subreport to main report?

Maybe you are looking for