Key Document Structure (KDS)
Dear Experts ,
I searched in many forums & threads but I could not get answer.
Please anybody throw a light on what is KDS in general in SAP & in particular in SAP PM
Regards
Keerthan Kumar
HI Keerthan,
I am sure whether this is what you are looking for, else some one else will provide you detailed information
KDS is Key Data Structure
This document is used to have detailed information about SAP PM configuration
Functional Location Category / Technical Objects / User status / Equipment Category / Catalog / etc. It will have all the relevant details you have configured for PM
Regards
Terence
Similar Messages
-
How to find the Internal Document Structure Number STLNR from the DIR Key
Hello:
Our requirement: When a user moves the Header DIR of a Document BOM to Released Status, we need to check if all the BOM Items in this Document BOM have also been released (in Status Released). If not, we need to give the user an error message informing them which component DIRs need to be released before the system will allow them to release the Header DIR. We can do this by entering the DIR Key of the Header DIR and find out the Internal Document Structure Number (Document BOM Number = STLNR for BOM Category Document Structure STLTY = D) from the available input of the DIR Key DOKARDOKNRDOKTL+DOKVR. Then we need to use the value of STLNR in Table STPO to find the Document BOM Items and check the status of each BOM Item DIR.
If Table STKO had DIR Key as an input we would have our solution, but alas it does not. Can anyone point us in the right direction by suggesting how to get to STLNR from the DIR Key? Your help would be much appreciated!
Niraj PantHi Niraj,
the STLNR should be contained in structure rc29k. You can also use the DMS BAPI DOCUMENT_GETDETAIL2 with parameter GetStructure or DOCUMENT_GETSTRUCTURE. With these BAPIs you should be able to determine the document structure to an existing document info record. For further information on the mentioned BAPIs please see SAP note <a href="https://service.sap.com/sap/support/notes/766277">766277</a> which contains a complete documentation on all existing DMS BAPIs.
Best regards,
Christoph
P.S.: Please reward points if this information was usefull. -
How to create a crosstab based on BW Query which has key figure structure
Hi,
We are on CR 2008 SP1.
We have an existing BW query with custom Characteristics structure in the "Columns" section and a custom Key Fugure structure in the "Rows" section in the BW query designer.
Cell editor has been used to define formulas of the cells.
We wish to build a crystal report on top of the query.
On the crystal report on top of the query we get the characteristics structure and individual key figure elements. As already discussed in multiple fourm posts, this is the expected behaviour.
We are using a cross tab and in the column section, I have put the "Characteristic" structure in the "columns" section in the crosstab using the crosstab expert. This leads to horizonatal column headings as per expectation.
Within the characteristics structure we have multiple fields which description "%" with diffeent formula's defined on the BW query designer. On the Cyrtsl Report, when we get the columns in the crosstab, we get only a single "%" field. All other "%" fields are not visible.
A. Is there a way to get all fields in in case of same description?
I tried putting in the Key Figure elements in the "Rows" section, but was not able to get desired output.
Experts: Can you advice how this report can be built?
Any help will be appretiated.
RgdsI am interested... How did you solve it?
-
Fiscal year in the columns outside the key figure structure
Dear Experts
I have a report requirement to show the keyfigures in the columns from year 1 to year 10 and in each year there are 4 keyfigures each restricted to 1 quarter for 4 quarters.
So, there are too many keyfigures to create.
I am using fiscal year in the columns outside the Key figure structure containing the keyfigures restricted at each of 4 quarters.
So, when the report displays, all the 10 years will automatically be displayed.
The problem is one of the 4 quarter level keyfigures needs to be restricted by calendar year.
How can I read what is the fiscal year for each column at runtime so that I can reference this value to determine the calendar year ?
As you know, each FY spans 2 Calendar Years. So, i need to restrict this on the 4th keyfigure by calendar year but while having the FY outside the keyfigure structure i can get all the FY, I am not sure how to access this value at runtime so that eg.
if FY for column 1 is 2010, i can set calendar year to be 2010 to 2011.
Hope you can give me some clues.
Thanks you Gurus!
Best regards
JohnDear Sunnybt
Copy Riyes, I find your response interesting. Please could you elaborate your idea of using condition in more detail.
Sorry for my late response.
Allow me to clarify my statement, which you are right, is unclear.
By :
"if the current QuarterFY is less than the current QuarterFY"
I mean :
eg. user enters FY range : 2009 to 20NN (eg. 2017)
KF_column1_FY2009_Q1______KF_column2_FY2009_Q2____KF_column3_FY2009_Q3______KF_column_FY2009_Q4______KF_column_FY2010_Q1______KF_column2_FY2010_Q2____KF_column3_FY2010_Q3______KF_column_FY2010_Q4_____KF_column_FY_NNNN_Q1
For each column, where the FY can be any year range entered by user,
the Text Description of the Column should show either 'Actual' or 'Plan' based on what is the current FY Quarter at runtime.
If the FY Quarter (eg. 1st column is 200101) is before current FY Quarter (i.e 201103), then the Description of this column should be "Actual" , else "Plan".
In my current design, I am unable to use customer exit text variable to meet this requirement.
So, I like to check with you for fresher ideas.
If not , I would use a workbook, which I am avoiding as the user needs to drilldown and I believe drilldown is not possible in workbooks where report layout needs to be rigid or cell positions fixed. Of course, unless there is a way out of this which I do not know.
Best regards
Bass -
Hi Friends,
We are implementing DMS in our organization. Our file storing system is explained below.
1st level - Vendor name (like Nyro / Hydraulics / techno )
2nd level - Project name (like A1 / A2/ A3)
3rd level - Dept. (like Civil / electric/ admin)
4th level - Type (like Drawings / docs / memos)
Can we do thru Document structure or by classification (by creating characteristics / class and attaching to doc. type)
Which one is better way ? If we use document structure can we authorization for each level objects like in 2nd level one person is authorized for A1 another for A2 like way other levels also.
Regards,
Sai KrishnaHi Sai,
mainly you can work with both ways. The creation of a class which enables your users to classify each document info record and then control the permissions with the suitable authorization objects or by a BADI implementation will work.
Another solution would be to create a document BOM structure in CV11 or with the help of the new browser function in ECC 600 release. For further information on the browser function please see also the following link http://wiki.sdn.sap.com/wiki/display/PLM/NewFunctionalitiesinERP2005.
Additionally I think that EasyDMS could also be a solution to setup this scenario for your user. In the above SDN WIKI area for DMS you will also find a special content part for EasyDMS too.
In the release ECC 600 with EA-PLM extenstion you can use the ACL authorization concept to add individual authorizations for
users to single document info records. This could be useful to allow one user to enter folder A and another to enter only folder B.
I hope that this information could be useful for you.
Best regards,
Christoph -
I have Dreamweaver CS5.5 and all of a sudden I can't open it says XML parsing fatel error. Invalid Document Structure What do I do? Thanks
You need to rename the Configuration folder to Configuration_BU.
The folder can be found by following this http://www.dmxzone.com/go/16740/clearing-dreamweaver-s-cache/ -
Document structure, Document Hierarchy, Document line Item Bom
hi, All
I m confustion in the following,
1.Document structure,
2.Document Hierarchy,
3.In Material bom- DOCUMENT [CS01/2]
We can enter so many document in the above activities.
I m confusion with Document structure and Document in material Bom [CS01/2].
I linked documents in CS02 but Those will shows in DMS but Can't opens. I don't know what is the use creating link in CS02, even though this document not triggers Production order.
[For document structure needs Change number that i know.]
But actual use or application i dont know. Could Explain with Exmple.
Rgds
Benhi,
niranjan,
I created a object link for Bom Item [STPO_DOC] and Bom header [STKO_DOC] using T-code CS01. This BOM item, BOM Header triggered in DMS. From DMS I am trying to display cs03, But system wonu2019t allow to display.
And secondly I am trying to link document from DMS to sap object- Material Bom [STOP]
But system wonu2019t allow.
How i can establish link materail bom and dms.
Rgds
Ben -
Looking for function module to clear document structure
Hello,
we want to use Easy DMS for quick check-in of documents. Therefore we need a folder (document structure) to move all new documents in this fixed defined folder. Now we want to clear every night this folder. Does anybody know, which function module could I use?
Thanks a lot for any support.
Best regards.
MarkusHello Iring,
thanks a lot for your answer. BAPI_DOCUMENT_CHANGE2 is a solution, but in this case I have to read everytime all documents. In my case I know already the folder number (document structure) and therefore I'm looking for a function module to give just the folder number to clear, which would be the best way from performance side.
Anyway thanks a lot for your answer.
Regards.
Markus -
XML document structures must start and end within the same entity
Hi there,
I'm working with a client/server application and using SaxParser for reading in xml. I get the SaxParserException: XML document structures must start and end within the same entity. I understand what that means, but it isn't applicable! The xml data being used is well-formed. I checked the well-formedness with Stylus Studio to make sure. Here's the data:
<?xml version='1.0' encoding='UTF-8'?>
<vcmessage>
<vcsource>3</vcsource>
<processevent>16</processevent>
<shape>
<llindex>0</llindex>
<shapetype>9</shapetype>
<shapeproperties>
<shapelocation>
<xcoord>54</xcoord>
<ycoord>184</ycoord>
</shapelocation>
<bounds>
<width>24</width>
<height>24</height>
</bounds>
<fgcolor>
<fgred>0</fgred>
<fggreen>0</fggreen>
<fgblue>0</fgblue>
</fgcolor>
<bgcolor>
<bgred>255</bgred>
<bggreen>255</bggreen>
<bgblue>255</bgblue>
</bgcolor>
<thickness>1</thickness>
<isfilled>false</isfilled>
</shapeproperties>
</shape>
</vcmessage>The parser generally stops around the </bgcolor> tag.
I'm using Eclypse as my IDE. I'm wondering if there's something wrong with it? Or maybe there's something wrong with the class I'm using for reading in the XML? Followng is the class.
Please advise,
Alan
package vcclient;
import java.io.*;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
import javax.xml.parsers.*;
public class XMLDocumentReader extends DefaultHandler
private VCClient client = null;
private Writer out;
private String lineEnd = System.getProperty("line.separator");
private boolean haveSourceType = false;
private boolean haveUserName = false;
private boolean haveMessage = false;
private boolean haveProcessEvent = false;
private boolean haveLinkedListIndex = false;
private boolean haveOpeningShapePropertiesTag = false;
private boolean haveShapeType = false;
private boolean haveOpeningShapeLocationTag = false;
private boolean haveShapeLocation = false;
private boolean haveOpeningXCoordTag = false;
private boolean haveOpeningYCoordTag = false;
private boolean haveOpeningBoundsTag = false;
private boolean haveBoundsWidth = false;
private boolean haveBoundsHeight = false;
private boolean haveOpeningFGColorTag = false;
private boolean haveOpeningBGColorTag = false;
private boolean haveOpeningThicknessTag = false;
private boolean haveOpeningIsFilledTag = false;
private boolean haveOpeningImageDataTag = false;
private boolean haveOpeningTextDataTag = false;
private boolean haveFGRed = false;
private boolean haveFGGreen = false;
private boolean haveFGBlue = false;
private boolean haveBGRed = false;
private boolean haveBGGreen = false;
private boolean haveBGBlue = false;
private boolean haveThickness = false;
private boolean haveIsFilled = false;
private boolean haveImageData = false;
private boolean haveTextData = false;
private VCMessage vcmessage = null;
public XMLDocumentReader(VCClient value)
client = value;
vcmessage = new VCMessage();
public VCMessage getVCMessage()
return vcmessage;
public boolean haveSourceType()
return haveSourceType;
public boolean ParseXML(InputStream stream)
boolean success = false;
// Use the default (non-validating) parser
SAXParserFactory factory = SAXParserFactory.newInstance();
try
// Set up output stream
out = new OutputStreamWriter(System.out, "UTF-8");
// Parse the input
SAXParser saxParser = factory.newSAXParser();
saxParser.parse( stream, this );
success = true;
catch (SAXParseException spe)
// Error generated by the parser
System.out.println("\n** Parsing error"
+ ", line " + spe.getLineNumber()
+ ", uri " + spe.getSystemId());
System.out.println(" " + spe.getMessage() );
// Unpack the delivered exception to get the exception it contains
Exception x = spe;
if (spe.getException() != null)
x = spe.getException();
x.printStackTrace();
return success;
catch (SAXException sxe)
// Error generated by this application
// (or a parser-initialization error)
Exception x = sxe;
if (sxe.getException() != null)
x = sxe.getException();
x.printStackTrace();
return success;
catch (ParserConfigurationException pce)
// Parser with specified options can't be built
pce.printStackTrace();
return success;
catch (Throwable t)
t.printStackTrace();
return success;
return success;
public void startDocument()throws SAXException
emit("<?xml version='1.0' encoding='UTF-8'?>");
nl();
public void endDocument()throws SAXException
try {
nl();
out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI,
String lName, // local name
String qName, // qualified name
Attributes attrs)throws SAXException
String eName = lName; // element name
if (eName.equals(""))
eName = qName; // namespaceAware = false
emit("<"+eName);
if (attrs != null) {
for (int i = 0; i < attrs.getLength(); i++) {
String aName = attrs.getLocalName(i); // Attr name
if (aName.equals("")) aName = attrs.getQName(i);
emit(" ");
emit(aName + "=\"" + attrs.getValue(i) + "\"");
emit(">");
if(makeStartTag(eName).equals(Constants.OPENING_SHAPEPROPERTIES))
haveOpeningShapePropertiesTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_SHAPELOCATION))
haveOpeningShapeLocationTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_BOUNDS))
haveOpeningBoundsTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_FGCOLOR))
haveOpeningFGColorTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_BGCOLOR))
haveOpeningBGColorTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_BGGREEN))
System.out.println("See BGGreen");
else if(makeStartTag(eName).equals(Constants.OPENING_BGBLUE))
System.out.println("See BGBlue");
else if(makeStartTag(eName).equals(Constants.OPENING_THICKNESS))
haveOpeningThicknessTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_ISFILLED))
haveOpeningIsFilledTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_IMAGEDATA))
haveOpeningImageDataTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_TEXTDATA))
haveOpeningTextDataTag = true;
public void endElement(String namespaceURI,
String sName, // simple name
String qName // qualified name
)throws SAXException
if(sName.equals("") && !qName.equals(""))
sName = qName;
emit("</"+sName+">");
else
emit("</"+sName+">");
if(makeEndTag(sName).equals(Constants.CLOSING_SOURCE_TYPE))
haveSourceType = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_USER))
haveUserName = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_MESSAGE))
haveMessage = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_PROCESSEVENT))
haveProcessEvent = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_LINKEDLISTINDEX))
haveLinkedListIndex = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_SHAPETYPE))
haveShapeType = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_SHAPELOCATION))
haveOpeningShapeLocationTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_WIDTH))
haveBoundsWidth = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_HEIGHT))
haveBoundsHeight = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BOUNDS))
haveOpeningBoundsTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGRED))
haveFGRed = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGGREEN))
haveFGGreen = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGBLUE))
haveFGBlue = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGCOLOR))
haveOpeningFGColorTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGRED))
haveBGRed = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGGREEN))
haveBGGreen = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGBLUE))
System.out.println("See closing BGBlue");
haveBGBlue = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGCOLOR))
haveOpeningBGColorTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_THICKNESS))
System.out.println("XMLDocumentReader: Step2");
haveOpeningThicknessTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_ISFILLED))
haveOpeningIsFilledTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_IMAGEDATA))
haveOpeningImageDataTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_TEXTDATA))
haveOpeningTextDataTag = false;
private String makeStartTag(String tag_name)
String start = "<";
String end = ">";
return start.concat(tag_name).concat(end);
private String makeEndTag(String tag_name)
String start = "</";
String end = ">";
return start.concat(tag_name).concat(end);
public void characters(char buf[], int offset, int len)throws SAXException
String s = new String(buf, offset, len);
if(haveSourceType == false)
if(vcmessage.getSourceType() == null)
try
if(s.equals(""))return;
int sourcetype = Integer.parseInt(s);
vcmessage.setSourceType(sourcetype);
catch(NumberFormatException nfe){}
else if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE)
if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE && haveUserName == false)
vcmessage.setUserName(s);
else if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE && haveMessage == false)
//When the parser encounters interpreted characters like: & or <,
//then this method gets invoked more than once for the whole message.
//Therefore, we need to concatonate each portion of the message. The
//following method call automatically concatonates.
vcmessage.concatMessage(s);
else if(vcmessage.getSourceType() == SourceType.WHITEBOARD_SOURCE)
if(haveProcessEvent == false)
try
vcmessage.setProcessEvent(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveLinkedListIndex == false)
try
vcmessage.setLinkedListIndex(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveShapeType == false)
try
vcmessage.setShapeType(Integer.parseInt(s));
catch(NumberFormatException nfe){}
if(haveOpeningShapePropertiesTag)
if(haveOpeningShapeLocationTag)
if(haveOpeningXCoordTag)
try
vcmessage.setXCoordinate(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveOpeningYCoordTag)
try
vcmessage.setYCoordinate(Integer.parseInt(s));
//reset all flags for ShapeLocation, X and Y coordinates
haveOpeningXCoordTag = false;
haveOpeningYCoordTag = false;
//haveOpeningShapeLocationTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningBoundsTag)
if(haveBoundsWidth == false)
try
vcmessage.setBoundsWidth(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveBoundsHeight == false)
try
vcmessage.setBoundsHeight(Integer.parseInt(s));
//reset flag
//haveOpeningBoundsTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningFGColorTag)
if(haveFGRed == false)
try
vcmessage.setFGRed(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveFGGreen == false)
try
vcmessage.setFGGreen(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveFGBlue == false)
try
vcmessage.setFGBlue(Integer.parseInt(s));
//reset flag
//haveOpeningFGColorTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningBGColorTag)
if(haveBGRed == false)
try
vcmessage.setBGRed(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveBGGreen == false)
try
vcmessage.setBGGreen(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveBGBlue == false)
{ System.out.println("getting BGBlue data");
try
vcmessage.setBGBlue(Integer.parseInt(s));
//reset flag
//haveOpeningBGColorTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningThicknessTag)
try
vcmessage.setThickness(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveOpeningIsFilledTag)
vcmessage.setIsFilled(s);
else if(haveOpeningImageDataTag && vcmessage.getProcessEvent() == org.jcanvas.comm.ProcessEvent.MODIFY)
vcmessage.setBase64ImageData(s);
else if(haveOpeningTextDataTag && vcmessage.getProcessEvent() == org.jcanvas.comm.ProcessEvent.MODIFY)
vcmessage.setTextData(s);
//reset
haveOpeningShapePropertiesTag = false;
emit(s);
//===========================================================
// Utility Methods ...
//===========================================================
// Wrap I/O exceptions in SAX exceptions, to
// suit handler signature requirements
private void emit(String s)throws SAXException
try {
out.write(s);
out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
// Start a new line
private void nl()throws SAXException
try {
out.write(lineEnd);
} catch (IOException e) {
throw new SAXException("I/O error", e);
//treat validation errors as fatal
public void error(SAXParseException e)
throws SAXParseException
throw e;
// dump warnings too
public void warning(SAXParseException err)
throws SAXParseException
System.out.println("** Warning"
+ ", line " + err.getLineNumber()
+ ", uri " + err.getSystemId());
System.out.println(" " + err.getMessage());
}Just out of curiosity what happens if you append a space to the end of the XML document?
-
Dear Experts,
Scenario:
Create document in DMS with status IE In preparation.
Change the document with status Release
Before release of the document we validate that the respective documents are stored in respetive folders.
Documents are stored manually by using CV12.
Some times user stores the document with status IE in the folder which we want to validate as
Only documents with released status should get stored in respective folders?
I could not find any BADI / USER EXIT for this functionality?
Can any body help on this ..
Thanks and Regards
RaneDear Kristoffer
Thanks for the reply
Document_storage01 is used for storing Originals.
What I am doing is DIR is being stored in Document structure say XYZ.
So I need to validate at the time of transaction CV12 and not while check in process.
Thanks and regards,
Rane -
DOCUMENT STRUCTURE INCONSISTENT ERROR
Hi all,
We are on SRM 5.0 ECS
When w etry to create a PO and click on the CHECK button,we get the foll error:
DOCUMENT STRUCTURE INCONSISTENTYour description is too generic - try to create yourself an example and hold it - no save. Then debug the transfer BBPPROCDOCTRANSFER. You should figure out more than this very general error description.
Richard -
Document structure & Document Hierarchy
Hi,
Can any one reply me the difference between Document structure & Document Hierarchy with suitable example for more clarification? Write me in your own words dont give me the link from sap help, I know that.
Waiting for your valuable response.
Regards,
Seema PilankarHi,
from my point of view I would recommend you to use the functionality of document structure.
The main difference is that for document structure you can create a header in transaction CV11 and then link as many document info records to it. Further transactions are CV12 (edit) and CV13 (display). So the document structure is easier to handle. Due to the position interval it should be possible to add up to 999 documents here.
The document hierachy is nearly the same but you have to go the transaction CV02N and enter the superior document info record for each sub-document and this needs a lot more time than in CV12 for example. For the document hierarchy there is no limit on the number documents which are linked to a superior document info record.
For more information please see the SAP Online documentation (http://help.sap.com) under:
SAP R/3 Enterprise Application Components
- Cross-Application Components
- Document Management
- Document Structures
I hope this inrformation could be useful for you.
Best regards,
Christoph
P.S.: Please don't forget to reward points for good information. -
Hi all
I'm reading about Document Structure and I have a question.
I wanna create a Structure (1) for user and they only base on this structure to create new Document Structure themself
I mean Structure (1) is something like the process and user just base on this...
Can I create this ? And where can I create this in DMS.
For example:
I have a Structure (1) [not Document Structure]
A (1)
|
|____|B (2)
|____|C (2)
|____|_________D (3)
A,B,C,D are Document type
And when user create Document DIR they have to base on this Structure (1)
I try to make my problem clearly with everyone... But so hard to get it. If you don't understand me you can ask for more information.
Regard
An NLP
Edited by: An NLP on Mar 18, 2010 3:16 AM
Edited by: An NLP on Mar 18, 2010 3:17 AM
Edited by: An NLP on Mar 18, 2010 3:18 AMHi Amaresh Makal
Thanks for your caring my problem. I use another example and hope you can understand what I want.
A,B,C,D are Document Types.
And have a rule: A must have B,C,D
I mean
When users create a document in Document Type A, they have to create the documents in other Document Types: B,C,D.
And document in A is only released when the documents in B,C,D are released.
I want a structure (like Document Structure) for Document Type and it is used for all of documents in that Document Type.You should notice that I'm talking about Document Type not Document
Maybe, It's impossible to do because I can't find out anything to link the Document Types in DMS.
Finally, If it cannot be done and do you think SAP DMS need a system like that ?
Regards
An NLP -
Is posssible to create Document structure in KM ?
Hi All,
Similar to DMS, Is it possible to Create a Document Structure in KM?. or Is it possible to link various documents ?
Thanks
BadriHi Jenn,
As such Km doesn't allow document structure. The only possibilities is to have an iview of DMS or use the DMS connector ( This is based on the Variants in the search of documents). Both were not much of help.
- As of records management we were able to get the repositories into the KM. We couldn't use KM for records management because of the regulations as well as KM is meant for sharing the information where as records management has very specific conditions to satisfy.
How ever we are thinking of using the Public sector Records management and intergrate within KM.
Hope this helps
Cheers
Badri -
How to get the document structure with the document number"?"
Hello experts,
I have now a big trouble. There is a document with the number '?' in our syste. And for this document a document structure was builded. Now I can't acess the document structure, because the system doesn't accept '?' as a document number...
Can you help me?
Thanks a lot!
best regards,
YingHi Sarita,
thank you very much! My problem is now solved, and the documents in the structure are free again _
best regards,
Ying
Maybe you are looking for
-
Mac Mini G4 with Panasonic 42" Plasma TV
I hooked up the TV using DVI-HDMI cable. Things worked fine for about 30 minutes. Now just a blank screen. Any ideas? Thanks
-
My CFQUERY is working fine, and has for years. I am ordering my lastname. Just recently a client joined the list with a last name that starts with a lower case letter. As many of you know, lowercase appears at the end in a database sort. This really
-
Mobile Infrastructure 7.0 JSP on Windows Mobile installation..?
Hi guys, I have an urgent need for installation (.cab/.exe) for a MI 7.0 JSP SP11(or the latest SP12) for Windows Mobile 5.0 based device.. Do you have any notion from where I can get the installation? A look through SAP Notes did not get me to any m
-
How to create sharepoint Group with read only permissions using powershell for entire site ?
How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)
-
Problem with updating bios toshiba satellite l655-s5144
Hello first of all having a good day, four months ago a problem with my laptop toshiba satellite l655-5144 I have something crazy ,happens that when starting Windows 7/8 freezes there and I can not access windows, I thought it was an error of hdd, bu