Key Figure Attribute not displaying in Query Designer

Hello Experts,
I have an InfoObject which has Key Figures as attributes. When creating a query I <b>once</b> was able to see these Key Figure attributes in the Query Designer. Howerver, recently I am not able to see them anymore in our DEV environment.
In our QA and PROD environment I am to see these Key Figures attribues in Query Designer. Is there a setting that I am overlooking? We are currently on BW 3.5 with SP 19.
Please help!
Thanks in advance,
BQ

Hi Jaya,
Thanks for the quick response. But how to I check the authorization for 1KYFNM and what am I looking for?
Thanks,
BQ

Similar Messages

Key figure attribute not displaying in query

Hello experts.
I have a key figure attribute called Credit Limit. It is an attribute of Customer. The key figure is type CURR with 2 decimal places.
When I maintain master data for Customer, I can see the value fine e.g. 2,000.00
When I run a BEx Query the very same value displays as 0,00.
Does anyone have any idea why this could be?
For info we run BW 3.5.
Thank you.

Hi,
1.please ensure that your master data is activated (right click the IObj, Activate Master Data)
2. how do you display this attribute? as attribute of the customer? as Nav? as a formula variable ?
let us know
Olivier.

Infoobject in infoset but not displaying in query designer

Hi,
I have created a query on infoset(ods1 & ods2).
a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
pls give your inputs,for why this infoobject is not available in query designer.
Thanks
Radika

Hi Radika,
I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
Do this and see if it helps.
Thanks & regards,
Nikhil

Key figure Attributes not working

Hi ALL,
We have an isuue with one of our Planning book. Key figures which are supposed to be open for editing are showing as output only and key figures which are for output only are showing as open for editing.
I went to design mode to tried to change in manually , if I chane one row attribute all rows are getting changed.
I found a macro which assigns Key figure attributes which I tried to activate but still not working. We are using SAP SCM 4.1 Version.
Can any advice on this?
Sivarama

Thanks Problem is now solved. Looks like some has made changes in the design and there are macros which are working and as you said they might be conflicting. I changed the design which was working weired yesterday when I tried to cande one row attribute and all rows are getting applied, this worked fine today. And I deactivated the macro which is working on some row attributes and activated again.
I am not very clear what went right but working.
Sivarama

Why key figures are not displaying

Dear Experts,
I am faced with a problem not encountered before. My report has multiple key figures all of which are not displayed when I run the query. However if I change the view to Tabular format (from query properties) the key figures become visible.
Request your help in resolving the issue.

Hi,
are you hidden the some key figures? please check.
select the KF -> go to properties -> check the display tab - hide/show/hide can be shown.
if not close and open one more time in query designer.
Thanks,
Phani.

Characteristic with a key figure attribute is displaying the currency

In our report, we have a characteristic, Grant, with an attribute of Total Grant Amount which is a defined as a key figure. We recently went to SPU16 and since then the currency is displaying along with the dollar amount. It looks like this:
<Heading>Total Grant Amount
<Row>      USD 20,000.00
<Row>      USD 120,000.00
<Row>      USD 209,680.00
Is there any way to remove USD from the report? I can't make Total Grant Amount navigational and then filter out the currency. It's not an option for Grant. There's no edit capability for Grant to allow it to be navigational.
Thanks!
Debby

You have two choices - new CKF with a nodim function around the key figure
Or in query properties - display scaling factors - then the USD will go to the top of the column heading
edit - sorry I just realised this is an attribute key figure not a normal key figure

Attribute not visible in Query Designer

hi BI Gurus,
I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the cube in which the main char is used looks fine.
I have checked all the options in RSECADMIN, everything looks good.
pls help me in finding the solution..
thanks
Cnu..

check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
check out with the infocube whether u r checked the check boxes in navigational attribute tab.
regards
harikrishna.N

Key figure is not displayed in info area

Hi experts,
I have a customer created key figure. I see it in RSD1 but it is not displayed at any info area. Normally when we create any info object and don't assign any info area, it must be displayed at " Unassigned Nodes ". But it is not displayed. When i search it in info objects, i can't find. But i can see it in RSD1. Anyone knows its solution? Thanks in advance
FIRAT KAYIRAN
MM&BW Consultant
Istanbul, Turkey

Hi All,
Firstly thanks for your reply.
1- In key figures i know it can not be marked as infoprovider. But also i searched in modeling-infoprovider section. But i can not find it.
2- My key figure is active. But again i can not see it.
3- I've searched all nodes(assigned key figures and non-assigned key figures)
Waiting for your reply.
FIRAT KAYIRAN
MM&BW Consultant
Istanbul, Turkey

Navigational Attributes Not Available in Query Designer

I don't see navigational attributes under Dimensions/DimensionA in Query Designer. Is there a switch to enable/disable nav attr. in BW?

Hi,
Yes you need to switch on Navigational charateristics at DSO/CUBE and then add them to MultiProvider Dimension and assign then assign the fields.
Thanks,
Nagarjuna

Key figure is not displaying correct data format

Hi SAP Guru,
I am facing this issue while checking query output.
Please find the below example:
Actual Value in Infocube :
506,934,567,522,159,433,380.99
Bex Report Output:
506,934,567,522,159,000,000.00
Please provide your suggestion what can we do to correct the data output in reporting layer.
Thanks
Priyanka

Setting is similar like this only .... Actually Data after decimal is not an issue the main problem is that before decimal data is coming in Zero form eg.
Actual Value in Infocube :
506,934,567,522,159,433,380.99
Bex Report Output:
506,934,567,522,159,000,000.00
Before decimal last 6 digits

Virtual Key Figures its not populated when execute query

Hi All
I did a BADI for populate a Virtual Key Figure, I follow the instructions of link
Link:[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c?quicklink=index&overridelayout=true]
In addition I add the code section of data declarated on example of: CL_EXM_IM_RSR_OLAP_BADI section define: IF_EX_RSR_OLAP_BADI~DEFINE, only information that said:
DATA: l_s_chanm   TYPE rrke_s_chanm,
        l_kyfnm     TYPE rsd_kyfnm.
FIELD-SYMBOLS:
        <l_s_chanm> TYPE rrke_s_chanm.
I test the query on RSRT and the virtual Key Figure is "0.00" this look like if the virtual key figure is not populated.
I did other things like:
Set a Break Point on COMPUTE section of my BADI, I saw that the value is assigned, but I don't know how I can continue reviewing the pass of this value to result of query.
I generate again the query on RSRT.
My code is:
IF_EX_RSR_OLAP_BADI~DEFINE
method IF_EX_RSR_OLAP_BADI~DEFINE.
data: L_S_CHANM   type RRKE_S_CHANM,
        L_KYFNM     type RSD_KYFNM.
field-symbols:
        <L_S_CHANM> type RRKE_S_CHANM.
case I_S_RKB1D-INFOCUBE.
    when 'ZGTO_OB2'.
      append 'ZVIRTKF' to C_T_KYFNM.
endcase.
endmethod.
IF_EX_RSR_OLAP_BADI~COMPUTE
method IF_EX_RSR_OLAP_BADI~COMPUTE.
field-symbols <FS_ZVIRTKF> type any.
P_KYF_ZVIRTKF = 16.
assign component P_KYF_ZVIRTKF of structure C_S_DATA
to <FS_ZVIRTKF>.
<FS_ZVIRTKF> = 10 .
endmethod.
I will appreciate your recommendations, Thanks in advanced.
Al

Thank you very much Sanganya
I saw this:
I put a break point on P_KYF_ZVIRTKF = 16., then I saw that P_KYF_ZVIRTKF obtain value 16.
Then on sentence: assign component P_KYF_ZVIRTKF of structure C_S_DATA
to <FS_ZVIRTKF> , when the system pass this line, I review the sy-subrc and is equal 4, as I understood the ASSIGN sentence did not be complete, the value shoul be 0.
Then when the system try to run the sentence: <FS_ZVIRTKF> = 10 the system send an Execution error that say: GETWA_NOT_ASSIGNED...
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32780).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Exactly the line selected with error is:
>>>>    <fs_zvirtkf> = '10.0'.
I will appreciate your help
Thank you
Al

Using Key figure attribute of a characteristic in a query

Hi All,
I have the following scenario. I have defined a key figure attribute for a characteristic Infoobject. I have included this characteristic infoobject in an Infocube. I now want to use the key figure attribute as a regular key figure when I create a report based on the Infocube. Is it possible and if so how is it possible?
Thanks
Sundar

Hi Saundar,
   There's another way.Set the characteristic with key figure attributes as a data target under your info area. Create a MultiProvider and include your Cube and this characteristic. Here you can set the key figure as your MultiProvider key figure.
   Don't forget to take care of the identification of MultiProvider.
   Hope this helps.
Regards,
Aaron

Key Figure in a Input Ready Query

I have 9 key figures in my input ready query. 5 of them are not input ready and being loaded through a job and 4 are input ready. There is a problem with one key figure, I am able to see data for the key figure when i have START QUERY IN THE CHANGE MODE turned off. But once I turn it on it is not showing any data for the key figure. This is happening only wiht that key figure, all the other key figures are working fine. Could someone help fixing this
Thanks
Rashmi.

Hi,
I do face this type problem during my BI IP implemenation project. Pls chk thoroughly the following points.
1.The planning mode of your real-time infocube should be on always on( you need change from load to planning mode, while inputting data).
2.The START QUERY IN THE CHANGE MODE , should be on.
3.In the planning tab of key figures, ensure you enable the button : Data can be changed using planning functions.
4.In the advanced tab of key figures, pls make sure to enable the right button( Master data).
5.Pls make sure , the real time infocube, aggregation levels, filters etc, should be refreshed & active,if make any changes in planning model in between, in Aggregation levels,filters etc.
6. Pls chk the locks( SM12) always, and delete all of them, if any.
7. Log-off the Server (BEX/DWWB) and restart the BEX ,then open your Input query, it should work .
Regards
CSM Reddy

Populate key figure attributes values for material & location in inventory

Hi all,
We have a Inventory Infocube. the dimensions of the inventory infocube contains material, location and material-location and also the time dimension with calday, week and month. The different key figures in the infocube are Unrestricted Stock Balances, Unrestricted Stock Receipts, Unrestricted Stock Issues, QI Stock Balances, QI Stock Issues, QI Stock Reciepts, Blocked Stock Balances, Blocked Stock Receipts, Blocked Stock Issues. The following is the definition for master data objects
Material Master - ATTRIBUTES :- Business Unit, Manufacturing Plant, Base to Case Conversion Factor(key figure attribute)
Location Master - ATTRIBUTES:- City, State, Country, Location Type
Material Location master - ATTRIBUTES:- Material, Location, MRP Controller, Source Location, Standard Cost(key figure attribute)
We have a report with material, location, calender day and with all the stock balances keyfigures. also in the report we have the key figure attributes of material master and material location (like standard cost and base to case conversion). We have defined a formula variable on these attribute key figures with replacement path.
The problem is none of the records are getting populated with the standard cost and base to case conversion.
We are NOT doing any conversion at the report level.
Any help is greatly appreciated.
Regards
Vijay

There could be few possibility:
1. The variable you are inputting for standard cost and base to case conversion may not have any values in the master data.
2. See the master data table for Material and location. Note down those materails and location for which there are values for standard cost and base to case conversion. Now, run the reports for these materials
and location.
Btw, have made standard cost and base to case conversion as nav attributes. Plz make them nav attributes and see.
Thanks...
Shambhu

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Key Figure Attribute not displaying in Query Designer

Similar Messages

Maybe you are looking for