Key figure Date in Decimal format

Hi all,
   I have a key figure 0CPR_ACFR_K (Date) which is in Decimal format.
   Data in PSA for the particular field was like this '07102008'
   but after that it is changing to 7327.98 that is in decimal format.
   But i dont want this to happen ie. it should not get converted to Decimal or
   i want to convert the decimal value again to the equivalent date.
   pls help in this.

Hi jean liker,
It will get converted due to its properties. If you want to use this particular object as keyfigure, you can create a variable with processing type replacement path and use. Its better to maintain as char.
[Replacement Path: Replacement with a Characteristic Value|http://help.sap.com/saphelp_nw04/helpdata/en/03/6ba03cc24efd1de10000000a114084/frameset.htm]
Hope it Helps
Srini

Similar Messages

Key figure data in BEx report

Hi,
We are viewing some of the Key figure data of a particular report as ".", "$21.99MIN" etc, where $21.99 is the original value. When we click on the excel sheet cell and view in the formula bar, data is showing $21.99 correctly. But it is appearing as "$21.99MIN". In some places just"." is appearing where data can be seen in the formula bar.
Tried, converting to Formula option, with which we can see the numbers but as usual it is behaving as a normal excel sheet after applying the function.
Please suggest how to view the correct data for the report.
Regards

Hi,
Thanks for the reply.
It is a direct key figure. Two key figures in the query are displayed like this, while other KFs are displating the values as it is. Also i checked the data in Multi provider, BEx definition of the info object etc, there is no problem.
Regards

Copy Key figure data between two planning area with different storage bucket profile

Hi,
I have a DP planning area ' PA1' with monthly storage bucket profile data view 'PA1M' ( monthly TBF) and I want to copy the data to another planning area 'PA2' whose storage bucket is weekly. This would need me to write a custom program which will split monthly to weekly and then populate 'PA2'.
However, In 'PA2', I created two data views 'PA2W' (with weekly time bucket profile) and 'PA2M' (with Monthly Time bucket profile). If I am able to copy the data from PA1 (PA1M) to PA2(PA2M), it will automatically splits monthly to weekly in PA2W.
So my question is if there exists a way I can copy key figure data from PA1M to PA2M? Any BAPI?

Hi Rakesh,
You can use COPY/Version Management Function to do this.
Path: Demand Planning > Environment >Copy/ Version Management
The system takes into account only those periodicities that are common to both planning areas.
For example, if the data is saved in months in the source planning area (PA1) but in months and weeks in the target planning area (PA2)
the system copies to months in the target planning area and then Disaggregates the data to the storage buckets in accordance with the Time-based Disaggregation.
hope this wil help to understand the basic concept.
Kapil

BW Architecture - SURVEY - key figures data model vs account data model

Hi SAP Gurus,
Between the keys figures data model, and the account data model which one do you implement/prefer and for which reason ?
Thanks,
Greg
Edited by: Greg C. on Jun 4, 2009 5:56 PM

I once found the note 407563 on this subject. It gives the advantages and disadvantages from the point of view of data modelling and from the technical point of view.
It's a BPS note, but manly valid in a BW context.
Regards,
Fred

Key figure, number of decimal places are not showing in report output

Dear experts,
At cube level PO qty value is getting 0.010 where as in bex report output of PO qty showing as 0. I have chosen decimal places as 0.000 in key figure additional properties tab. In query designer also I have chosen no of decimal places as 0.000 in display propertiesu2026please help me out. How can I get 0.010 value in report o/p.
Thanks in advance.
Srivalli.

Hi,
Try to run the query in RSRT. CHeck if you are getting the same output. Also make sure that in the reports all the filters are same as you have applied in the info -cube to see the data.
- Jaimin

Key Figure - Data in InfoObject (MasterData) as attribute - how to....

Hello,
I have following scenario: I have a key figure which is filled with priorities (1-5). Now I have as a requirenemt - in order that the user can report on the priority - to fill a new InfoObject with the same content (priority). The new InfoObject is an attribute on an already existing InfoObject.
It should be a one-time action for data for the past.
Any (creative) idea?

You can add a CHAR Infoobject Priority in same Infoprovider and map it to Key figure priority. Then you can use the new Char Priority to report.

How to display Non Cumulative key figure data

Hi,
I want to check if there is any data for a non-cumulative key figure. While i am trying to display the data from cube or Multi provider, it is not showing this field. is there any way to check the data for this field other than using reports.
Regards,
Vishnu

Hi,
Take Eg: Quantity of valuated stock - 0VALSTCKQTY it is combination of
Quantity Received into Valuated Stock- 0RECVALSTCK and
Quantity Issued from Valuated Stock- 0ISSVALSTCK
In report you can see only 0VALSTCKQTY Keyfigure.
And the above Two Keyfigures are filling by Routines using Process Keys.
This is for 0IC_C03 and data you can check in MB5B Tcode in ECC.
Check;
Note 745788 - Non-cumulative mgmnt in BW: Verifying and correcting data
Thanks
Reddy

Key Figure data type/length differs in BI and source system

Hi all.
It is a strange question, but we need an explanation to our "strange" client. Why many fields which are DEC 13 in source system became CURR 09 in BI? DEC->CURR type switch seems reasonable, but not the length. I guess the shorter numeric field is the less precise it can keep...
Does SAP give any explanation for that?

Hi,
     If you are expecting the data to be aggregated in the cube and if the data is loaded by different requests, then in that case the data wouldnot be aggregated.
EX: CHAR1   CHAR2    CHAR3   CHAR4     CHAR5    CHAR6    CHAR7    KF1   KF2   KF3
         A               B              C            D        E              F             G          10     20    30
          A               B              C            D        E              F             G          10     20    30
sUPPOSE IF THE ABOVE 2 ROWS OF DATA ARE GETTING LOADED IN THE SAME REQUEST, then you can expect the data to be aggregated and the o/p of the KFs will be 20, 40 and 60 respectively.
In case the loading is done with separate requests, then your data will not be aggregated.
This is becuse in the cube, Request ID (under the Data Package Dimension)    is one of the dimension and this differs when the requests are different.
Regards
Sunil

Conditions: Variables on date key figures

Dear Sirs,
I am trying to create a condition on a key figure of type date (subtype: dats). I want the user to select a date interval for this condition, using variables.
The problems seems to be that the variable input screen thinks the user should enter an amount and not a date. If I enter a date in the variable then no data is beeing displayed.
So how can I get the variable to understand that the input is a date ?
Has anyone done what I try to do sucessfully.

Hello Rakesh,
thanks for your input. However, I am not able to get it to work.
I create a condition on the key figure "date". I use e.g greater than. Then create a variable with replacement path to 0CALDAY, and transfer the condition.
When I run the report I get the following error.
Termination message sent
ABEND BRAIN (418): Variable VAR_20080128112329 (D2LEOFV2P3JFW0YWPGXBKJ53A) does not exist or is incorrectly used 4 D2LENS95OIB2G5DTW28S323D2
MSGV1: VAR_20080128112329
MSGV2: D2LEOFV2P3JFW0YWPGXBKJ53A
MSGV3: 4
MSGV4: D2LENS95OIB2G5DTW28S323D2
Have you managed to solve the excact same requirement?
regards,
Jørgen

General Key Figure Monitor doesn't display data in the portal

Hi...
I have configured the general key figure monitor in SPRO. I executed the program KFM_VALUE_DET_SCHEDULE. When I execute the portal iview using the context id, the key figure data does't display. The context id is set to the key figure category.
Any ideas?

Hi
Thanks, that was just what I was looking for.
I have verified that it is the right task, but unfortunately I still have an issue.
If I add tasks like uwl.task.webflow.default.TS92000077 or uwl.task.webflow.TS92000077 in a view under Support Itemtypes, then these tasks are still not shown in my list.
If I add another task that exist in the default configuration file (under system registration) then it works fine.
Please look at the two screendumps under item Type. In the screendump that works the complete name is shown under Item Type and in the other case only a prefix call default is displayed.
http://webdata.dk/uwl/works.jpg
http://webdata.dk/uwl/fails.jpg
Am I missing some configuration in the backed or does anyone have any idea where this information is received from?
Thanks in advance
Cheers
John Stubbe

BW3.5 - Query Cache - InfoObject decimal formatting

Hello all,
I built a bw query, which displays key figures. Each key figure uses the decimal place formatting from the key figure infoobject (In Query Designer, the properties for each keyfigure for Decimal places, is set to "[From Key Figure 0.00]").
I decided to change the InfoObject key figure to have 0 decimals places (in BEx formatting tab for the Key Figure). Now, when I open up query designer, and look at the properties for the Key figure, it still is set to "[From Key Figure 0.00]" (it should be "[From Key Figure 0]" to reflect the Key Figure Infoobject change.
I tried to generate the report using RSRT, and deleting the query cache, but it still shows up with two decimal places. Has anyone encountered this problem before? I am trying to avoid removing the Key Figure infoobject from the query and readding it to reflect the change.
Thanks!

Hello Brendon
You have changed the KF infoObject to show only 0 decimal( no decimal)..that is okay but in query KF property you have selected with 2 decimal so data will be displayiing in 2 decimal...the query setting is local and have priority over KF InfoObject settings...
If you notice in KF property in query u will have one option from the field somethjing which means whatever is defined by KF infoObject...just select that now onwards u will get only those many decimal which u have defined in KF InfoObject
Thanks
Tripple k

Compression error due to Key figure values

Hi experts,
When I am compressing the Info cube, the job is getting terminated. I think that the problem comes from a data issue.The field /BIC/ZX_COM_LC (key figure) contains huge values in both F table and E table. For exapmle the entry in F table is 23.592.684.640.809,00 (16 digit) and E table entry is 985.460.854.341.148,62 (17 digit)and while in the process of compressing they should be added and the value becomes 18 digit number which is greater than the capacity of that Key figure(CURR 17 decimal 2). This is why the compression job is terminated.
Please through some light on this issue.
1.If I change the key figure type from DEC to FLTP , what are the consequences?
2.Do we have any oss notes to solve this issue in production?
3.Is there any work around for this?
Please provide your inputs to solve this issue.
Thanks in advance,
Edited by: SiNU reddy on Aug 19, 2010 3:35 PM

Seems like you have too much of data still present in F fact table whcih needs to be compressed.
Is this data is present in one request or with the multiple requests?
If its with the multiple requests then you can do the compression job multiple times by splitting the number of requests in this case so that the data whcih you are trying to compress is limited in this case.
So I propose you to compress few requests at one time and proceed further and check whether you have the same issue comes again or not?
Do get back.. Hope this helps.
Murali

Key Figure can't find mapping in transfer rules

Hi,
I am trying to validate some data for datasource 2LIS_12_VCITM. I went through the transfer structure and it has the mapping of LFIMG Actual quantity delivered (in sales units) to 0DLV_QTY. However, when I tried to validate the key figure data, this field LFIMG supposedly has the quantity value for the key figure InfoObject name other than 0DLV_QTY. Why is this? I can't seem to do a 1-to-1 mapping of the key figures to the fields from the R3 table.
Thanks,
"To succeed in the world it is not enough to be stupid, you must also be well-mannered." ~ Voltaire, French author, humanist, rationalist, & satirist (1694 - 1778)
"Words -- so innocent and powerless as they are, as standing in a dictionary, how potent for good and evil they become in the hands of one who knows how to combine them." ~ Nathaniel Hawthorne (1804 - 1864)
"Vulgarity is, in reality, nothing but a modern, chic, pert descendant of the goddess Dullness." ~ Edith Sitwell (1887 - 1964)

Hi,
Ucan goto Busines content level... . u can install that relevant.. quantity fileds...
in quantity fields.. so many fileds in Business content....
regards,
raj

While transporting Key Figures from Dev to Quality system, error occured.

Hello Experts,
While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
field)".
Here, I have changed the data type of the key figure from Number type to Amount type. Then I activated them, captured in request and when transported I got the error saying "/BIC/AZPA1R_CT40-/BIC/ZPA1RBAL9 (specify reference table AND reference field)"
These Key Figures are used in ODS.
Is there I am missing something, please tell how can I make these transports successfull.
Thanks Ishdeep.

While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
Yes you missed to transport reference object.
Previously key figure data type is number then you have changed to Amount. While changing data type to amount You should maintain reference char like 0currency, Doc_currency......in the Unit/currency tab. ( If you use fixed unit or currency no need to maintain any reference Object).
During transpotation you need to collect this reference char with main key figure and then transport.
With Regards,
Kishore.

Key figure security

I'm trying to secure some key figure data. What field is suppose to be used: 1kyfnm or 0tcakyfnm? The documentation says to use 0tcakyfnm, but neither object is in our system. I have tried to enter the fields directly into the authorization and rsecadmin won't let me. What am I missing?

Alex,
I've tried to make that object auth relevant, but that object is not in our system. When I go to RSD1 and enter it, I get the message 'enter valid characteristic (0tcakyfnm not avilable)'. I did searches for a different name (thinking that the name changed) but could not find an object that had a close name. I looked in OSS to see if there is a different manner to make this object auth relevant, but could not find one. Is there a different transaction or do we need to create the object? Thanks.

Key figure Date in Decimal format

Similar Messages

Maybe you are looking for