Key figure description for key figure YKFRFCFGD does not exist in liveCache

Dear SAP Gurus,
We have upgraded our APO 3.10 to SCM 5.1,
Sopport Pack details:
SAP_BASIS 700 16
SAP_ABA 700 16
ST-PI 2005_1_700 6
PI_BASIS2006_1_700 6
SAP_BW 700 18
SAP_AP 700 13
LCAPPS 2006_700 4
EA-IPPE 400 13
SCEMSRV 510 7
SCM 510 6
SCMBPLUS 510 6
SCMEWM 510 6
SCMSNC 510 6
SCM_BASIS 510 9
BI_CONT 703 10
QIE 200 5
ST-A/PI 01K_SCM500 0
and Live cache 7.4.02.29 from to 7.7.03.23
We facing following issue during APO operation in live cache.
Error details:
"Characteristic combinations with liveCache anchor but without time series"
"Key figure description for key figure YKFRFCFGD does not exist in liveCache"
"There is an inconsisteny between the key figure descriptions in liveCache and in the database. The key figure description of key figure YKFRFCFGD exists in the database but not in liveCache."
Kindly help me out on this.

Please execute Live cache consistecny check:
for Planning area , check all the option.
/SAPAPO/TS_LCM_CONS_CHECK
MPOS:
/SAPAPO/TS_PSTRU_CONS_CHECK            
Manish

Similar Messages

  • The 'c' XUSER key for the DBM user does not exist or could not be identified

    Hello members,
    I am getting this message  'The 'c' XUSER key for the DBM user does not exist or could not be identified' in SUM preparation phase while upgrading SOLMAN from 7.01 to 7.1
    Does anyone has any idea on this. What steps need to be followed for this.
    My DB is MaxDB.
    Thanks,
    Srikanth

    Hello,
    Figured out the problem. Actually SAP System was moved from actual server to Virtual machine on the server. In this process some of the DB configuration got corrupted. And this activity was done by one of our previous employee.
    Since this was a standalone system, I took backup of all current configuration and uninstalled SAP and installed new Solman 7.1 SPS12. Issue is resolved now.
    Best Regards,
    Srikanth
    Solman Upgrade from 7.01 to 7.1 stuck in Extraction-PREP_EXTRACT/BEGIN_PRE phase 

  • FP08M error: Key for G/L accounting does not exist

    Hi,
    I am receiving this error message 'Key for G/L accounting does not exist' when trying to reverse document using t-code FP08M. If you could help me understand the error message, and maybe a way of getting the document reversed I would really appreciate it.
    Thank you!

    Hi,
    Such GL issues arise due to incomplete entries in TFK033D table.

  • Text ID  for text object MATERIAL does not exist - MM01

    Hi All,
    I am getting below error message when trying to save Material Master in MM01.
    Text ID  for text object MATERIAL does not exist
    Message no. TD603
    Diagnosis
    You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
    Procedure
    You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
    The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
    I have searched the forums but couldn't get relevant message.
    Please assist.
    Thanks,
    Raj

    Hi Jurgen,
    This is the complete message i am getting.
    Text ID for text object MATERIAL does not exist
    Message no. TD603
    Diagnosis
    You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
    Procedure
    You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
    The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
    If I enter MM02 and without changing anything if i save still i get this error message.
    Thanks & Regards,
    Raj

  • Text ID for text object BUT000 does not exist

    Hi Experts.
    I am doing data migration using LSMW with IDoc. I have this error message "Text ID for text object BUT000 does not exist" when processing the IDoc.
    Can anyone tell me what is this error about and how could i fix it. A step by step guide would be nice. Really need advice urgently.
    I'll definitely rewards points.
    Regards,
    Julianna

    for this u need to maintain the text object and its related text id using the TC: SM31 in rel. view of  ur tcode( like MM01, Va01 etc).
    first get the view names(1 for text object and 2 for text id) from fun. people.
    then go to sm31 with 1 view, create BUT000 .
    then go to sm31 with 2 view, maintain text id for the text object:BUT000.

  • Category for service category S046 does not exist

    Dear Experts,
    This is regarding the Bdoc error "Category for service category S046 does not exist". ECC service materials are trying to replicate from ECC to CRM. In our scenario we doesn't required ECC service material in CRM. I have not downloaded service materials relevant data. Still i am facing the above error.
    Please help to fix the above error.
    Regards
    Ashwini

    Hi,
    Thanks for your reply. I have maintained the filter on service_master  object is not working.
    I have not downloaded the service material from ECC to CRM.Then what could be the reason for the above bdoc error.
    Please help me.
    Regards
    Ashwini

  • System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

    System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally  gets through.

    Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
    Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
    802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
    You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
    Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

  • Category for material type MAT_KMAT does not exist for configurable product

    Hi,
    Trying to download Confihurable product from ECC to CRM,for this I am getting the below error.
    "Category for material type MAT_KMAT does not exist"
    For this , i have successfully downloaded the object DNL_CUST_PROD1, but still the  material type MAT_KMAT does not exist under R3PRODSTYP in COMM_Hierarchy transaction.
    kindly let me know how to get the material type MAT_KMAT  under R3PRODSTYP .
    Regards,
    PV

    Hi
    Please go through the below pdf document. This will be useful.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9076a9a4-923c-2c10-7483-d997a9eae976?quicklink=index&overridelayout=true
    Regards

  • I have an ExportPDF subscription under an old account for which the email does not exist anymore and I have forgotten the password.  Therefore I cannot reset the password.  I hav created a new Adobe account so how do I get the subscription for ExportPDF m

    I have an ExportPDF subscription under an old account for which the email does not exist anymore and I have forgotten the password.  Therefore I cannot reset the password.  I have created a new Adobe account so how do I get the subscription for ExportPDF moved to the new account?

    Hi lgmmo,
    I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
    A quick Chat session should get you fixed up.
    Please let us know if you have additional questions.
    Best,
    Sara

  • Getting status row for item '' activity id '' does not exist

    Hi,
    Need your help.
    Create a custom workflow SAMPRREQ. Its having following processes.
    1. Start Process
    2. Respond Notification.
    3. Function to update Table with the responded value.
    4. End process.
    After lauching the workflow, Notification send to the performer. Open the notification. When approver click the any of the result value (approve, reject, onhold) system giving followign message.
    3101: Status row for item 'SAMPRREQ/20130206161924', activity ID '242956' does not exist.
    I have seen some threads in the forums and bounce the database , purge the item type completly. But, still getting the error.
    Regards/Prasanth

    Sosa,
    When i run the wfstat nothing wrong in the info. unable to find the issue.
    But, i have narrow down the issue. In the function process in my workfow i am calling a custom function called update_approval_status_new.
    In this the value of the respond notification to be updated to a header table of this workflow and insert into events tables.
    When i comment these two dml ( update to header status & insert into events ) there is no error.
    Can any one tells me can i update and insert custom tables in workflow or not. If I want to do this, what is procedure.
    Regards/Prasanth

  • Substitute nulls for blank when row does not exist??

    I am trying to put a query together to build a fixed width file. I am using rpad and using NVL to substitute for nulls. That seems to work fine until I have to do a multi table select. I run into a problem when the the id field in the customer table does not exist in the customer_addr table. The NVL works if the id exists and it does insert the blank for the null, but if the id is not there, then I get the null instead. How can I force the blank for the case where the row is not even in the second table without changing the data in the table?
    select
    rpad('MYDATABASE',20),
    rpad(id,20),
    to_char(updt_dttm,'yyyymmddHHMMSS'),
    rpad(fname,40),
    rpad(mname,35),
    rpad(lname,40),
    (select rpadNVL(a.addr1,' '),10) from customer_addr a where a.id = customer.id and a.addr_type = 100)
    from customer
    Thanks!

    Hi,
    Welcome to the forum!
    user1189388 wrote:
    I am trying to put a query together to build a fixed width file. I am using rpad and using NVL to substitute for nulls. That seems to work fine until I have to do a multi table select. I run into a problem when the the id field in the customer table does not exist in the customer_addr table. The NVL works if the id exists and it does insert the blank for the null, but if the id is not there, then I get the null instead. How can I force the blank for the case where the row is not even in the second table without changing the data in the table?
    select
    rpad('MYDATABASE',20),
    rpad(id,20),
    to_char(updt_dttm,'yyyymmddHHMMSS'),
    rpad(fname,40),
    rpad(mname,35),
    rpad(lname,40),
    (select rpadNVL(a.addr1,' '),10) from customer_addr a where a.id = customer.id and a.addr_type = 100)
    from customer
    Thanks!Sorry, I'm not sure I understand the problem.
    Is the problem with the last column in your SELECT clause?
    (select rpadNVL(a.addr1,' '),10) from customer_addr a where a.id = customer.id and a.addr_type = 100)It looks like you're missing a left-parentheses between RPAD and NVL. If you're getting anything other than an error message, this is probably not what you're running.
    At any rate, the scalar sub-query (the entire expression I quoted above) will be NULL if it doesn';t find any row. You need to apply RPAD and NVL to the results of the scalar sub-query, like this:
    RPAD ( NVL ( (      SELECT  a.addr1
              FROM     customer_addr     a
              WHERE     a.id          = customer_id
              AND     a.addr_type     = 100
         , 10
         )     I hope that answers your question.
    If not, please explain more clearly, and be specific about where the problem is.
    When you post output (or any formatted text) on this site, type these 6 characters:
    (all small letters, inside curly brackets) before and after each section of formatted test.  That's what I did above.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Adobe form for Billing document - FM does not exist error

    Hi,
    I have to display the document title as Invoice/Credit Memo based on the billing type in the adobe form. I tried to include a text field in the adobe form to display the title which I pass from my print program based on the billing type (instead of hard coding it).
    I get the name of the function module generated through debugging and try to use in tthe program to call the form. But I get the error message that the Function Module does not exist.
    I have included the title field in my interface, context, form and have activated them.
    Is my approach incorrect or am I missing something?
    Regards
    K

    Hi Jon,
    I tried doing it again today morning and it worked!!! Thanks for your help...

  • HT5312 how do i delete WRONG cloud ID from my ipod touch?  it was typed WRONG and I cannot delete it because it does NOT exist and I don't know password for email accoutn that does not exist

    how do i delete WRONG cloud ID from my ipod touch?  it was typed WRONG and I cannot delete it because it does NOT exist and I don't know password for email accoutn that does not exist

    someone please help, I can't even delete content because it prompts me for a password for an account that I mistyped - wth?????

  • Searching for a server that does not exist on boot up

    Hi all,
    I keep getting the following box pop up on start up, every time, I was wondering how I could stop the MacBook from looking for 192.168.0.8. I does not need to connect to this address anymore - it is currently my PC though this changes depending on the order things have been switched on or off.
    http://img.photobucket.com/albums/v240/tom1502/ScreenShot2014-03-27at153523_zpsc 810bdd2.png

    Hello Tom,
    Thank you for the details of the issue you are experiencing with your MacBook Pro trying to automatically connect with the server.  Have you checked to see if this server is listed in your Login Items in System Preferences? 
    I recommend removing this item if you see it listed in Login Items using these steps:
    Add or remove automatic items
    Choose Apple menu > System Preferences, then click Users & Groups.
    Select your user account, then click Login Items.
    Select the name of the item you want to prevent from opening automatically, then click Delete "-" below the list on the right.
    Find the article here:
    OS X Mavericks: Open items automatically when you log in
    http://support.apple.com/kb/PH14173
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • PLSQL - Creating a cursor for a table that does not exist

    I am writing my first PLSQL program, and I have run into a problem creating a cursor.
    I have a cursor that accesses a table on another database via a database link. The database link does not yet exist, so the first thing that my PLSQL does is create the database link. The problem is that I have to define my cursor before I have executed the code for the database link, and the compiler gives me an error for referring to a table that does not yet exist. How can I get around this?
    Here is the basic structure of my program
    DECLARE
    --cursor defined here
    BEGIN
    --code creates database link if it does not yet exist
    --code executes cursor
    END

    I'm still not sure I understand why the database link can't be created in advance... Once you run your code once, the database link is going to exist permanently. Why not just create it at compile time like every other object in your application?
    It's sort of like trying to create a table at runtime-- if you do that, you can't refer to that table in static SQL later on. You can do everything with dynamic SQL, but that's going to substantially increase the complexity of your code.
    Additionally, you have to have the CREATE DATABASE LINK privilege granted directly to the user running your code, not through a role, which seems like a huge security hole.
    Justin

Maybe you are looking for