Key figure does not exist

Hi APO Gurus ,
After SCM and Liive Cashe migration , when we run transaction /SAPAPO/SDP94 the following error message is appearing :
" Key figure does not exist " .
Does somebody has any Ideas ? any logical flow for resolution ?
Appreciate your help ,
Yoni

Hi Yoni,
Check on the following
1) Check whether the planning area is initialised after migration
2) Look for any pending transports during migration
3) Check any key figures maintained with calculation type N
4) Check sap note 1352371
5) In case if the error still exists, run report
/SAPAPO/PSTRUCONS
Regards
R. Senthil Mareeswaran.

Similar Messages

"The key 'LocalizedPerfCounter' does not exist in the appSettings" when creating Socket

Hi all,
Some time ago, I've installed the nuGet package for self-hosted signalR applications on a project. Today, I went to start a completely unrelated project, one that does not have that package (or any package at all), and has absolutely nothing to do with owin,
asp.net, signalR or anything else related to that package.
Now in this project, when I try to create a Socket, I get an InvalidOperationException: "The key 'LocalizedPerfCounter' does not exist in the appSettings".
The exception seems to be handled and the program proceeds, but it's annoying.
Also, I'm seriously concerned. Here I'm not trying to create some arcane ASP.NET thing that calls down into a dozen layers and six different configuration frameworks before actually getting to the TCP stack. I'm doing a plain straight new Socket(AddressFamily.InterNetwork,
SocketType.Stream, ProtocolType.Tcp).
How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to affect something that resides in the basic System.dll? What business does it have interfering with very low-level network calls?

Hello Zappo,
For this InvalidOperationException, please check this hotfix to see if you are under those scenario:
http://support.microsoft.com/kb/2784156
>> How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to…
For this, since it is related with the NuGet, I suggest that you could post it to the NuGet forum,
https://nuget.codeplex.com/workitem/list/basic
The current forum is specifical for .NET Framework Class Libraries.
Discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection. Discuss and ask questions
about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection.
Thanks&Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

REP-52005: The specified key userlogin does not exist in the key map file.

Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
; OracleAS Reports Services                       ;
; CGICMD.DAT                                      ;
; Example CGICMD.DAT Mapping file                 ;
; Syntax:
;      KEY : VALUE
; Where:
; KEY - the first argument of the rwservlet URL request (case sensitive).
; VALUE - command line parameters and/or special parameters.
; Keys can be referenced in the following ways:
;    1. Parameter on command line to the reports servlet
;          e.g. http://machine/servlet/rwservlet?KEY
;    2. Parameter on command line to a reports jsp
;          e.g. http://machine/mydir/myreport.jsp?KEY
;    3. Within a reports jsp - in the rw:report custom tag
;          e.g. <rw:report parameters="KEY">
; In addition to the Reports Server command line parameters, VALUE can include special parameters
; represented as "%X", where X identifies the parameter. Currently recognized special
; parameters:
; %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
; %* - entire contents (all arguments) of original rwservlet URL request.
; %D - request users to input database userid everytime they run the report.
; %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
;       construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
; CGICMD.DAT Usage Notes
;   1. Multiple keys in this file MUST be separated by an EXTRA empty line.
;   2. Extra spaces are ignored. Multi-line entries allowed.
;   3. Lines starting with ";" character are treated as a comments.
;   4. Comments within a key or key value are NOT allowed.
;   5. NLS language support is provided and can be used (encoding should match the one
;      used in HTML request - no language conversion of any kind is attempted.
;   6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
;      The HTML format in the future may be mapped to the HTMLCSS format.
;;;;;;;;;;;; Example Key Entries
; Example 1: Run a simple breakb report and output to HTML
orqa: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 3: use %D to require user authentication every time
report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
; Example 4: Take all arguments from URL and send it to the reports server
run: %*
; Example 5: Run breakb report with HTML parameter form.
breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
; Example 6: take all URL arguments, and also generate a HTML parameter form
runp: %* %P
; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
;;;;;;;;;;;; Keys for Reports Demos
; Using default/in-process server.
; JSPs
;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
;charthyperlink_ids: userid=scott/tiger@ %*
;barcodeweb:         userid=oe
;parmformjsp:        userid=oe
;tutorial:           userid=oe
; Paper Reports
;xmldata:            userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
;barcodepaper:       userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
;distributionpaper: userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
;pdfenhancements:    userid=oe report=utf8test.rdf destype=cache desformat=pdf
userlogin : userid=SYMFINBTOTEST@fin10r21 %*
As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
Parsed Map File Entries
Return to Top
Key Name
Value
runp
%* %P
breakbparam
report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
report_defaultid
report=breakb.rdf destype=cache desformat=html server=repserver
run
report_secure
report=breakb.rdf destype=cache desformat=html server=repserver %D
express
report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
orqa
report=breakb.rdf destype=cache desformat=html server=repserver
Please help me to to make the key being populated here and being used by the reports server.
Thanks,
Priya

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Getting Process instance with key '0' does not exist.

I am doing a request based provisioning task.When I request for a resource the approvers are able to approve the request but the user is not created.
I am getting the below exception at the backend:-
[XELLERATE.APIS],Class/Method: tcProvisioningOperationsBean/getProcessDetailData encounter some problems: Process instance with key '0' does not exist.
[11/2/12 0:30:13:640 EDT] 00000097 SystemOut O ERROR,02 Nov 2012 00:30:13,639,[XELLERATE.WEBAPP],Class/Method: RequestApprovalDetailAction/requestDetail encounter some problems: Process instance with key '0' does not exist.
Thor.API.Exceptions.tcAPIException: Process instance with key '0' does not exist.
     at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.getProcessDetailData(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.getProcessDetail(Unknown Source)
     at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.getProcessDetail(Unknown Source)
     at com.thortech.xl.ejb.interfaces.EJSRemoteStatelesstcProvisioningOperations_6b2f800a.getProcessDetail(Unknown Source)
     at com.thortech.xl.ejb.interfaces._tcProvisioningOperations_Stub.getProcessDetail(Unknown Source)
     at Thor.API.Operations.tcProvisioningOperationsClient.getProcessDetail(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor309.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:337)
     at com.ibm.websphere.security.auth.WSSubject.doAs(WSSubject.java:118)
     at Thor.API.Security.LoginHandler.websphereLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy6.getProcessDetail(Unknown Source)
     at com.thortech.xl.webclient.actions.RequestApprovalDetailAction.setStandardApprovalDetail(Unknown Source)
     at com.thortech.xl.webclient.actions.RequestApprovalDetailAction.requestDetail(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor665.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
     at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1096)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1037)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
     at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
     at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
     at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
     at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:832)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:679)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:566)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
     at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:748)
     at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1466)
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:119)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
     at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
     at com.ibm.ws.ssl.channel.impl.SSLReadServiceContext$SSLReadCompletedCallback.complete(SSLReadServiceContext.java:1818)
     at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
     at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
     at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
     at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
     at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
     at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)

Process instance with key '0' does not exist
Such issue typically appears when the Provisioning is initiated without "Auto Save" i.e. before ORC_KEY entry goes in the OIU table...
Second possibility can be that the mandatory attributes in the process form are not populated..
Third possibility can be that the Status is Waiting... And Resource is dependent on another Resource...
Are you able to Direct Provision the account? I mean without raising Request Based provisioning?
Please give us following details:
(1) Resource Profile:-status of Auto Save
(2) Approval Process:- status of Auto Save and Auto Pre-Pop
(3) Prov Process:-status of Auto Save and Auto Pre-Pop.
(4) Is the object form properly populated?
(5) Is the Process form properly populated?
(6) Any Exception occurred during Approval process?
(6) In the OIM Database, fire the following query:-
SELECT OIU.ORC_KEY
FROM OIU, USR, OBI
WHERE OIU.USR_KEY=USR.USR_KEY
AND UPPER(USR.USR_LOGIN)=UPPER('ABCDEFGH_USER')
AND OBI.OBI_KEY=OIU.OBI_KEY
AND OBI.OBI_KEY IN (SELECT OBI.OBI_KEY FROM OBI,OBJ WHERE OBI.OBJ_KEY=OBJ.OBJ_KEY AND
UPPER(OBJ.OBJ_NAME)=UPPER('AD USER'))
This will show whether any proper ORC_KEY was generated for this resource instance..

REP-52005: The specified key rep_drill does not exist in the key map file.

Hi
I am using Forms and reports version 11.1.1.4.0
Weblogic 10.3
I wanted to create a drilldown report
I have modified the cgicmd.dat file in the below location
C:\ORACLE\Middleware\user_projects\domains\CL2DOMAIN\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\cgicmd.dat
by adding the below line to the end
rep_drill: userid=JOE/JOE123@JOEDB server=rep_wls_reports_dsv-002_2inst desformat=pdf destype=cache paramform=no %*
restarted the reports server
In CUSTOMERS.RDF I have placed a link on the customer field using the below code
SRW.SET_HYPERLINK_ATTRS('TARGET="_new"');
SRW.SET_HYPERLINK('http://192.168.1.1:9002/reports/rwservlet?rep_drill+report='||'CUSTOMERS.rep+P_CUCODE='||CHR(39)||:CS_CUSTOMER||CHR(39));
There are so many parameters passing to the report JOBS.RDF
When I run the report and click on the link it gives me an error
"REP-52005: The specified key rep_drill does not exist in the key map file."
When I replace the rep_drill in the link with
userid=JOE/JOE123@JOEDB+server=rep_wls_reports_dsv-002_2inst+desformat=pdf+destype=cache+paramform=no
the report work perfect
Can somebody help me please

I said
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=
It looks like you did the following:
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=test.rdf
Try removing the test.rdf.
Anton
p.s. If you want some detailed help with integrating Apex and Reports, you can contact me offline here: http://concept2completion.net/c2/f?p=9876:20

11gR2- REP-52005: The specified key userlogin does not exist in the key map file.

hi,
i am getting this error "REP-52005: The specified key userlogin does not exist in the key map file." when running report using url
http://myserver.com/reports/rwservlet?userlogin&report_server&report=myreport.jsp....
i have added the key mapping entry in cgicmd.dat file with the name userlogin
as
userlogin: userid=scott/tiger@devdb %*
report_server: server=cluster_reports %*
but still this error,

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

REP-52005: The specified key replabel does not exist in the key map file.

Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key replabel does not exist in the key map file.
I updated the user_string in cgicmd.dat file but of no use. Plese kindly help me on the same.

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

CIF Error: Setup group/key 10000427 does not exist

Dear CIF-Specialists,
We observed a problem on the integration between APO and R/3.
If we want to send PPM's from R/3 to APO we have the following error-message: "Setup group/key 10000427 does not exist".
Transaction CFM1 (Create Integration Modell) ==> No problem
Transaction CFM2 (Activate Integration Modell) ==> Error!
We don't use setup groups or keys in our operations but we have created the setup keys in APO and R/3 (Transaction: /SAPAPO/CDPSC6 and OP43).
As we don't have keys in the PPM's it is normal that they don't exists.
Do you have an idea where we have to set theses Setup keys?
Can you give us an indication how we could resolve this problem?
Thank you.
Best regards,
Thomas

Dear Sharath,
Thank you for your reply.
We dont't have setup key or group maintained in this receipt. This is the strange part on this problem.
Why does it search for a setup key if we don't want to transfer it?
I checked also the setup-keys in APO and R/3 and they are the same.
We did a copy of the test-system (where the problem occurs) some days ago. Is there a table in APO where it could have some old entries about this?
Thank you for your help.
Thomas
Edited by: Ricci Olivier on May 12, 2008 11:39 AM

The scheduling margin key 000 does not exist

Hi guys
There is query from my side please do help me out
to get a solution for the following query
i was asked to give schedMarginKey = 000 while creating
a material for MRP(material requirement Planning)
but if i give schedMarginKey = 000 and save this it shows the
following error
The scheduling margin key 000 does not exist for plant JOP1
is ther any transaction code to overcome this?
please do help me out in this!!
Regards
Jino.

Hi
You can miantain the schedule margin key using t.code OMDC.
reward points if useful
Thanks & Regards
Kishore

Rep-52005 specified key PSREP does not exist in key map file

Hi there,
i am trying to reduce the length of my URL when calling a report (9iDS) from a parameter form
in 9i using web.show_document(url,'target'). I have defined a key "psrep" at the end of my cgicmd file at reports\conf . The error i get is
rep-52005 specified key PSREP does not exist in key map file.Stuck here.
Any help gr8ly appreciated.
Regards.

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

Primary key 1700 does not exist...

Hello,
I have a strange behaviour with my Entity bean. I am trying to make an update of an entity bean through a session bean, and it works only for primary keys inferior to a precise number (maybe 1700).
Otherwise the update throws the following error :
javax.ejb.NoSuchEntityException: [EJB:010142]Instance of EJB 'VEtHr' with primary key '1999' does not exist.
Do you have any idea about the problem ?
Thanks... :-)
Do I need to change the <max-beans-in-cache> variable? (I have already tried with a very big number).
Regards,

The problem is strange because before trying the update method of EJB, I am trying to get the full line by the id (getByPrimaryKey). And it works. I get all data for primary key =5002 for example.
But when I try to update it, I get this message :
; nested exception is:
javax.ejb.NoSuchEntityException: [EJB:010142]Instance of EJB 'VEtHr' with primary key '5002' does not exist.
My update method is just like this :
public void updateVEtHr(VEtHrDto vEtHrDto) throws RemoteException {
if (vEtHrDto != null) {
Integer hrId = vEtHrDto.getHrId();
try {
VEtHr vEtHr = vEtHrHome.findByPrimaryKey(hrId);
setVEtHrFromVEtHrDto(vEtHr, vEtHrDto);
catch (FinderException e) {
throw new RemoteException(e.getMessage());
}

Software component with Key ID does not exist

Hi Friends,
           Here I am in need of your help. I got involved in an upgrade from XI 3.0 to PI 7.1. The Basis has imported all the SWC & Business systems from XI 3.0. When I am trying to activate the objects imported from IR of XI3.0 then It is triggering an error as
data retrieving failed from Adapter Metadata | RFC http://sap.com/xi/XI/System. /// ROA_MOA_NOTCOMPLETED.
            Because of this I am unable to activate the imported objects in ID by showing the message as Software component with key ID XXXXXXXXXXXXXXXXXXXXX does not exist.
            when I went there to ESR then under a software component I found a message under underlying components like             " XXXXXXXXXXXXXXXXXXXXX not exist" but I am not aware of the object related to that Key ID.
Please help me out in this . Thanking you in Advance.
Regards,
Sridhar

Hi Neeetesh,
         I got the alternative solution for my problem. All credit goes to you. I recreated the communication channels instead of using the same ones after Upgrad. Any way we need to change the communication channels after importing the channels but the system is giving the above error message as   "Adapter Software component with Key ID XXXXXXXX...... does not exist".
         But its allowing me to create a new channel. Then based on the neetesh suggestion, I went through and create the new comm channels instead of wasting so much time on the same issue.
        Thanks a lot Neetesh.
         I am really sorry for not giving your points. I am assigning points now with great pleasure. Here you go.
Regards,
Dasari.

Floating point key figure does not clear completely with delete function

When executing a planning layout and/or a planning function, a floating
point key figure with a residual amount attempts to be deleted but does
not truly delete. The residual value remains.
We wrote an OSS note and below is the response and this was few months before.
<b>Yes, unfortunately this is the effect of both the system design and the
database aggregation. So one has to live with these effects or you can
use other data types as packed numbers instead (type amount with data
type curr, here addition and deletion is always exact with the technicaltechnical decimals).</b>
Since we have already configured and the data is stored in database, not sure if there is a way to convert to Packed numbers as well.
Did any one experience the same issue and is there a solution ?
Regards,
Kumar

Hi Kumar,
yes, I had the same experience once.
We did not find any better solution than use a "normal" key figure instead of the floating point.
regards
Cornelia

Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Thanks
SAP BW

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Key figure does not exist

Similar Messages

Maybe you are looking for