Key figure hierarchy is higher than the characteristics
Hello,
i have a problem about the hierarchy.
i have a info structure s902 with key figures Purchase order and Po-items but SAP see every PO-item as a PO.
So i have the same amount for Purchase order and PO-items. It should be for example 2 PO and 20 PO-items.
Purchase order :
event MA
Event MA
Update type C
Unit 50
Source unit 50 Numerator
Table for date MCEKKO
Date field BEDAT
Hierarchy A
in my characteristics i have also items from MCEKKO and MCECPO like item catagory and material.
Do i have to change the hierarchy level or make a furmula?
Hi,
There could be some other data already avilable in the Infocube. Pls take the Request ID or Number from the last run of the Infopackage you used and check the records only for that Request ID in Infocube.
You can check the data in the LISTCUBE Transaction.
Please let me know of you need additional information.
Thanks,
Jeysraj
Similar Messages
-
Info cube key figure quantity is more than the data source
Hi,
I am loading data from a custom table data source into an info cube. The data records and key figure quantity of the info cube is more than the data source custom table.
I checked the extraction in RSA3. The number of records records and key figure quantity are exactly extracted from the data source in RSA3 transaction.
But after loading using the info package, the number of records and the key figure quantity of the info cube is more than the actual records available in the data source. The update rule is simple 1 to 1 mapping.
Kindly help to troubleshoot this issue.
thanks and regards
MurugesanHi,
There could be some other data already avilable in the Infocube. Pls take the Request ID or Number from the last run of the Infopackage you used and check the records only for that Request ID in Infocube.
You can check the data in the LISTCUBE Transaction.
Please let me know of you need additional information.
Thanks,
Jeysraj -
Currency Translation for Key Figures with Value More Than One Currency
Hi...
I have query which display key figure GL Account Balance. The currency that used for this key figure is USD and IDR. How we want display value based on selection screen? So if we input currency USD, all value that use currency IDR translated to USD and all value that use currency USD not changed. Otherwise if we input IDR, all value that use currency USD translated to IDR and all value that use currency IDR not changed.
How we do this in query designer? Thank you.
I have use currency translation :
1. (Right Click Key Figures >> Properties >> Currency Conversion Key)
2. Target Currency Using Variables Entry
but seems the result is not correct. Can anyone help me ?
Regards,
SatriaHi all,
Thanks for your help, but still I have problem. I have create one currency conversion type, ZXXX. This currency conversion type is using exchange rate type = "M",source curr from Data Rec, sel of targ currency with translation,
and fixed time ref = "Current Date".
Problem:
1. With this setting, i create currency translation in BEx, but the result is not same, it's like the exchange rate not using the same setting with data in ECC (I compare data with transaction fs10N). Is my setting for exchange rate not correct?
2. When I try to display GL Account Balance --> Calculated Key Figure (Total Debet - Total Credit) for period 0, the translation not working. Example if the value is IDR 1234 then the value in USD still USD 1234. Why this happen?
Thank you
Regards,
Satria -
How can i make the end of a text higher than the rest in 3D?
I'm designing a 3D text for the outlet store of www.badkamermarkt.nl/ and would like to know how I can make the end of the text higher than the rest in 3D.
Hi,
Can you attach a comp of what you're trying to accomplish, instead of a live link to a commercial home page?
Are you wanting to make the country code of the url bigger like this?
regards,
steve -
HT1386 The version of my itunes is higher than the one u said i cant even find summary!
The version of my itunes is higher than the one u said i cant even find summary!
Check the appropriate link for assistance:
Mac > http://support.apple.com/kb/TS1591
PC > http://support.apple.com/kb/TS1538 -
Localization in OBIEE 10g(Error "start row is set higher than the row count
Hi All,
I m Working on Localization.
I have used exteranize string and saved excel file and added language column and inserted data en and fr and loaded the file into the database.
then i have created 2 variables
one is for weblanguage SELECT 'VALUEOF(NQ_SESSION.WEBLANGUAGE)' FROM DUAL
second is SELECT SESSION_VARIABLE, TRANSLATION FROM TAB_EXTERNAL WHERE LANGUAGE = 'VALUEOF(NQ_SESSION.LOCALE)' when i click on Test for the second variable it showing error
"start row is set higher than the row count"
i have seleted start row =10 and show some 10.then also it is showing same error.
Please send me the solution ASAP.
Thanks and Regards
Kiran KumarHi Kiran,
I am working in OBIEE localization. I created two variables and when press test i am getting vaules successfully. But in OBIEE application i am getting columns in english only. It seems there is some problem with values in DUAL table. It contains only 1 column called 'DUMMY' and value as 'X'.
Please give me complete configuration steps to setup localization OBIEE 10g. Please drop me a mail to [email protected] if u have steps. I will call u if u provide contact number. -
If I buy an iPhone from the Apple website, and then go to Verizon to activate it, will it reset my 2 year contract? Also, will Verizon charge extra for activating since the price on Verizon is higher than the Apple website's priceIt'
It's all very confusing to me, I need some answers from experienced customers.I already checked. I purchased my iPhone 3G on the launch date back in July '08. I've paid the bill the day my bill was issued, days ahead of its due date, and for some reason, even through it's magic 8-ball wisdom, said I was not eligible for and upgrade. Not till Dec. of this year at least.
So even though my phone is now technically 'mine' and off their contract, they still won't unlock it for me? How come? -
I am looking at the TB dashboard having just opened TB. On the left I see folders. The "sent" folder, lets say, is higher than the "outbox" folder. I want to put the "outbox" folder above the "sent" folder. How so I make that happen?
I know the addon will allow you to reorder the accounts, so you could put 'Local Folders' above another mail account.
It will also allow you to resort the folders within an account.
So if you have a Pop mail account that uses the 'Global Inbox' setup, then it should allow you to move the Outbox position within that special account.
But as the 'Outbox' is a 'Local Folder' folder, I'm not certain that you can move it out of 'Local Folders' and reposition into another account.
The method of moving folders is done via the Menu Bar.
'Tools' > 'Manually Sort Folders'
Select the folder and use the 'Move up' or 'Move down' buttons.
Then click on the 'Refresh folderpane' button to display the new sort order. -
Key Figure getting summed up in the report
Hello BW Gurus,
Please help me out on this as soon as possible as I need to resolve this issue by the end of today.
I have a Custom Key Figure 'X' in one of my ODS and I am hardcoding it with a constant value, say 1000. When I load the data and check the ODS table, the Key Figure value is seen as 1000. But when I run a query on a multiprovider that contains this ODS and 2 other cubes ( these cubes don't have the Key Figure X), the value of the Key Figure in the output of the query is getting added up. I need to see exactly 1000 for the Custom Key Figure in the query output. Please tell me how to do this?
Your help will be greatly appreciated and equally reqarded with points.
Thank you in advance.
Best Regards,
Deepthi.Hi Deepthi,
By default, when you run a query, if the KF you are displaying is not displayed with all the characteristics it is compounded, you'll get the KF added.
an example
the ods has:
char 1 char 2 KF
1 1 1000
1 2 1000
if in the query you only include char 1, you'll get a result as follows:
char 1 KF
1 2000
Hope this helps.
Regards,
Diego -
Key figure values vary each time the report is run by different users
Hi All,
We are facing a unique problem, here it goes :
Different users are getting different values for the same key figure, when executing the same query on the same selection conditions.Each time, user executes the report, he is getting varying values for the same key figure.Any idea's how to resolve this issue??
Thanks in Advance
BinduHi Bindu,
One reason might be due to authorizations as discussed earlier.
check how frequently is the cube getting refreshed.
This might also happen that if users are running the data at different times and there is a cube load in between.
check for this.
Cheers,
Srinath. -
Key Figures not showing up in the Query disigner
I added a key figure to a characteristic as an
attribute, but it is not showing up in the Query designer
any idea why
RajHi RajShekhar,
This KF that you have added as an attribute to a char will not be available in the Key Figure section. Open the dimensions and find the char for which you created this attribute. Open up the attributes under it and you should find the KF. If you need to use this KF value in a calculation, then you will need to create a formula variable to pull in its value.
Hope this helps... -
Key figures are not appearing in the reports ?
Hi Guys,
After integration process BW with Crystal 2008. I have tried to build a report on Bex query on top the Infocube. I could not fine key figures. Can you guys help me out ?Hi,
can you run the BEx query in transaction RSRT without any issues and keyfigures are shown ?
Ingo -
"B" key on x230 is lower than the rest.
I noticed that the "B" key is about a third lower than the rest of my keys. Is this normal and if it isn't, how can I fix it?
B key is also lower on my X220 keyboard as well but not that much. It is related to the trackpoint.
-
My brush tool is drawing higher than the cursor.
I am using it on a Mac and I tried changing brushes and shutting and reopen info the picture and using different pictures. The brush keeps drawing 1-2 brush spaces higher than where my cursor is.
Are you sampling all layers in a document in which you have an adjustment layer active?
-Noel -
Recently, my friend bought me a 16G black Iphone 5s at America airport and it costed $850.
But I really hope to know why it cost $201 more than the ones that sold on apple online store, since the consumption tax can't be that much.
Really hope to get some help.Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.
Maybe you are looking for
-
So sick of having Java problems on my Macbook Pro
I have problems with Java with every single browser on my mac. I have tried 6 different browsers and I cannot run any Java applications on any of the browsers. Every single time I open RuneScape or Minecraft, there is just a black screen. I can't eve
-
Is there a way to find the email address of the user's from SCCM database.
Hi All, I am using SCCM 2012 R2 and trying to find a query/report that can help in finding the email address of the user the machine is assigned to (Primary device). And if that is a machine which is being shared between different user, I need to gat
-
On the iMac, how do I change my password?
Sorry it sounds like a stupi question but I desperately need to know how! PLEASE HELP GUYS
-
HI friends, while upgrading we testing one report IN HR module im getting below error and schema is Z schema. An error has occurred during schema generation! Call the schema editor to analyze errors* Check the
-
Can I use both a credit card and gift card for the same purchase?
I want to buy a movie, (14.99) but I only have 14.98 in my account. Can I pay the 14.98 with my account balance and then charge the .01 to a credit card?