Key figure is not displayed in info area

Hi experts,
I have a customer created key figure. I see it in RSD1 but it is not displayed at any info area. Normally when we create any info object and don't assign any info area, it must be displayed at " Unassigned Nodes ". But it is not displayed. When i search it in info objects, i can't find. But i can see it in RSD1. Anyone knows its solution? Thanks in advance
FIRAT KAYIRAN
MM&BW Consultant
Istanbul, Turkey

Hi All,
Firstly thanks for your reply.
1- In key figures i know it can not be marked as infoprovider. But also i searched in modeling-infoprovider section. But i can not find it.
2- My key figure is active. But again i can not see it.
3- I've searched all nodes(assigned key figures and non-assigned key figures)
Waiting for your reply.
FIRAT KAYIRAN
MM&BW Consultant
Istanbul, Turkey

Similar Messages

Key Figure Attribute not displaying in Query Designer

Hello Experts,
I have an InfoObject which has Key Figures as attributes. When creating a query I <b>once</b> was able to see these Key Figure attributes in the Query Designer. Howerver, recently I am not able to see them anymore in our DEV environment.
In our QA and PROD environment I am to see these Key Figures attribues in Query Designer. Is there a setting that I am overlooking? We are currently on BW 3.5 with SP 19.
Please help!
Thanks in advance,
BQ

Hi Jaya,
Thanks for the quick response. But how to I check the authorization for 1KYFNM and what am I looking for?
Thanks,
BQ

Key figure attribute not displaying in query

Hello experts.
I have a key figure attribute called Credit Limit. It is an attribute of Customer. The key figure is type CURR with 2 decimal places.
When I maintain master data for Customer, I can see the value fine e.g. 2,000.00
When I run a BEx Query the very same value displays as 0,00.
Does anyone have any idea why this could be?
For info we run BW 3.5.
Thank you.

Hi,
1.please ensure that your master data is activated (right click the IObj, Activate Master Data)
2. how do you display this attribute? as attribute of the customer? as Nav? as a formula variable ?
let us know
Olivier.

Key figure is not displaying correct data format

Hi SAP Guru,
I am facing this issue while checking query output.
Please find the below example:
Actual Value in Infocube :
506,934,567,522,159,433,380.99
Bex Report Output:
506,934,567,522,159,000,000.00
Please provide your suggestion what can we do to correct the data output in reporting layer.
Thanks
Priyanka

Setting is similar like this only .... Actually Data after decimal is not an issue the main problem is that before decimal data is coming in Zero form eg.
Actual Value in Infocube :
506,934,567,522,159,433,380.99
Bex Report Output:
506,934,567,522,159,000,000.00
Before decimal last 6 digits

Total is not displayed in Result area

Hello Experts
I have an issue related to the result area display in a bex Query. in the query, one of the Formula Figure does not display the Total or Sum in the result area where as i have selected its propertyof summation in Calculate Result as.
The Formula figure contains the Formula variable in it & the formula variable is based on replacement path of an info object's key value.
kindly suggest the solution to get the Total value in result area.
I have also check the related issue in SDN but they are not helpful.
Thanks in advance
Neha

My ques is :
I have two key fig
                                         A1                         A2
MatA                                 1                             3
MatB                                  2.2                        4.2
MatC                                  1.6                       2
Total                                 4.8
Now properties for both key fig are same that is Cal result as is fixed with "Summation / Total/SUM" , but still in key fig A2 the total value is not displaying.
Please advice

Appended Key figure is not working in Delta reverse record

Dear All,
I have enhanced 2LIS_11_VASCL datasource, to pull value from condition record, called Surchage.
I have set reversal indicator for this field in my datasource. I have written code in CMOD to get this value from KONV table of that sales order.
Now when value is changed, delta record for this, automatically creates reversal record, but it shows new value of surcharge as negative, because that code is pulling value which currently exists in table.
For example for order 350089 , if surchage is $ 100 . User changes it to $200
Then I get following record.
Reversal Record - $200 (This should be instead -$100 , i.e. previous value)
New Record - $100.
Because of this my new value is not getting updated in table.
I can't use overwrite mode in ODS because some other technical reason.
How can I solve this problem?
appended Key figure is not working in Delta reverse record

LIS have before-after delta. So ODS should be in Overwrite mode. If that is not possible.. try sorting the records in Start Routine such way that the - 100 $ is above the - 200 $ records in Data Package.
but this is risky as it will affect other key figures for which things maybe fine. I guess you need take Data Package records in an internal table. And then sort this internal table. then you can read the internal table in update routine of this key figure.
OR (If you are on BI 7.0) you introduce an InfoSource in between DS and DSO with Overwrite mode for this Key Figure.

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Key figure does not exist

Hi APO Gurus ,
After SCM and Liive Cashe migration , when we run transaction /SAPAPO/SDP94 the following error message is appearing :
" Key figure does not exist " .
Does somebody has any Ideas ? any logical flow for resolution ?
Appreciate your help ,
Yoni

Hi Yoni,
Check on the following
1) Check whether the planning area is initialised after migration
2) Look for any pending transports during migration
3) Check any key figures maintained with calculation type N
4) Check sap note 1352371
5) In case if the error still exists, run report
/SAPAPO/PSTRUCONS
Regards
R. Senthil Mareeswaran.

How to create a non-cumulative key figure & How to make a info cube as so

Hi Experts,
How to create a non-cumulative key figure & How to make an info cube as non-cumulative cube?
Can any one kindly provide me the steps we need to performe?
Thanks in Advance,
Raj

Hi Azael,
In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
Hope this helps!
Regards
Sriram

Virtual Key Figures its not populated when execute query

Hi All
I did a BADI for populate a Virtual Key Figure, I follow the instructions of link
Link:[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c?quicklink=index&overridelayout=true]
In addition I add the code section of data declarated on example of: CL_EXM_IM_RSR_OLAP_BADI section define: IF_EX_RSR_OLAP_BADI~DEFINE, only information that said:
DATA: l_s_chanm   TYPE rrke_s_chanm,
        l_kyfnm     TYPE rsd_kyfnm.
FIELD-SYMBOLS:
        <l_s_chanm> TYPE rrke_s_chanm.
I test the query on RSRT and the virtual Key Figure is "0.00" this look like if the virtual key figure is not populated.
I did other things like:
Set a Break Point on COMPUTE section of my BADI, I saw that the value is assigned, but I don't know how I can continue reviewing the pass of this value to result of query.
I generate again the query on RSRT.
My code is:
IF_EX_RSR_OLAP_BADI~DEFINE
method IF_EX_RSR_OLAP_BADI~DEFINE.
data: L_S_CHANM   type RRKE_S_CHANM,
        L_KYFNM     type RSD_KYFNM.
field-symbols:
        <L_S_CHANM> type RRKE_S_CHANM.
case I_S_RKB1D-INFOCUBE.
    when 'ZGTO_OB2'.
      append 'ZVIRTKF' to C_T_KYFNM.
endcase.
endmethod.
IF_EX_RSR_OLAP_BADI~COMPUTE
method IF_EX_RSR_OLAP_BADI~COMPUTE.
field-symbols <FS_ZVIRTKF> type any.
P_KYF_ZVIRTKF = 16.
assign component P_KYF_ZVIRTKF of structure C_S_DATA
to <FS_ZVIRTKF>.
<FS_ZVIRTKF> = 10 .
endmethod.
I will appreciate your recommendations, Thanks in advanced.
Al

Thank you very much Sanganya
I saw this:
I put a break point on P_KYF_ZVIRTKF = 16., then I saw that P_KYF_ZVIRTKF obtain value 16.
Then on sentence: assign component P_KYF_ZVIRTKF of structure C_S_DATA
to <FS_ZVIRTKF> , when the system pass this line, I review the sy-subrc and is equal 4, as I understood the ASSIGN sentence did not be complete, the value shoul be 0.
Then when the system try to run the sentence: <FS_ZVIRTKF> = 10 the system send an Execution error that say: GETWA_NOT_ASSIGNED...
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32780).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Exactly the line selected with error is:
>>>>    <fs_zvirtkf> = '10.0'.
I will appreciate your help
Thank you
Al

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hello:
I am not being critical, but you seem to want Safari to behave exactly like Chrome. Every software developer has a plan. Sometimes features in one product parallel other products - sometime not. There might be some things available that would help you. Do not hold your breath, however, for suggestions from people who use these forums. Most of us use (and like) Apple products. If you wish to make suggestions for future improvements, there is a feedback area on this web site that Apple employees read/review.
Candidly, your approach would be akin to suggesting that Apple emulate the "features" in Windows (heaven forbid).
I use Safari (and have for years). I use Firefox (not a bad product) as my alternate browser.
Sorry for what appears to be a pedantic lecture. However, I think most of us adapt to different products if we really want to use them.
Barry
Message was edited by: Barry Hemphill

Error in DTP load from PSA to IC - Error - Key figure 0 not allowed for

HI ALL,
ERROR - Key figure <> 0 not allowed for unit ' '; see long text
Diagnosis
    The unit/currency ' Source unit MEIN ' with the value 'space' is
    assigned to the key figure ' Source Key Fig. DIFF ' with the value '
    4240.000- '.
System Response
    A key figure that is not equal to 0 and for which no unit/currency is
    set has an inconsistent data state. The data record is not processed.
Procedure
    Correct the source data.
Procedure for System Administration
Please guide
BR
Prasad

Hi ,
First af all identify all such records by creating an error DTP so that the same can be collected in Error stack .
1. Go to the Update tab of the normal DTP and there you can find the create Error DTP option .Click on that .
2. This will take you to the Error DTP screen .Use the option 'Valid record updated reporting possible (request green).You can increase the number of errorneous records to be avoided there only .
3. Please make sure you have activated the option of ' Valid records update reporting possible request green ' both in the Normal and Error DTP .Also the number of errorneous records to be avoided to be mentioned in both the DTP's.
4. Activate the DTP's (Both Normal and Error) .
After this can you please run the Normal DTP again .You can check the Error stack to see the errorneous records .When you double click on any record in the error stack it will thrown an error message from where you can find the exact error with those records .You can rectify these records in the errror stack and then run the error DTP to update the same to the data target.
Ideally these records should be rectified in the Source system .
Thanks
Kamal

Negative values of key figures to be displayed seperately

Hi,
I have a requirement where , the postive sales figures are to be displayed in one column and Negative sales figures are to be displayed in another column ina BEX report.... There is only one key figure ( sales )
how to get this please ?
PVC

Hi Pravendar ,
Thanks for your reply..
The key figure infoobject is only one called Sales..
If the value is negative , then it should display in seperate column in teh report..
I could not understand (KF < 0) * KF -
If the slaes figure is -1233 does this mean i should created a CalKeyfig
with (Sales < 0) * Sales ??
Can you please elaborate ?
PVC

Change order of key figure is not working in Web report output (using WAD)

Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

Key Figure values in the Bex Report are different from the cube

Hi all,
When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
Could some one help me find a solution to this issue.
I look forward to hearing from the experts.
Regards,
S.P

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

Key figure is not displayed in info area

Similar Messages

Maybe you are looking for