Key figure - master data info object

I have been asked to create a master data info object for the object "users" and this is this how the data looks like in the flat file. The object users is a key figure. Can I create a master data object for key figures. Let me know , if I am missing something.
State----Grade Level----users
AL--0--
53,520
AL--1--
57,423
AL--2--
56,172
AL--3--
57,859
Thanks

Hi Pooja,
You cannot create master data for a key figure. You can include a key figure as an attribute for another characteristic though. If you need to store values that are in the form of numbers, you can create your char of type NUMC.
Please let us know more about your scenario so that a better solution may be proposed.
Hope this helps...

Similar Messages

Master data info object - duplicate records

Hi All,
I have a flat file which has department data that looks like this
0     OTHER
0      00 Other
1      01 Language Arts
2      02 Mathematics
3      03 Reading
4      04 Social Studies
5      05 Science
6      06 Student Success
7     07 Write Traits
1     READING
2     LANGUAGE ARTS
3     MATHEMATICS
4     SCIENCE
5     SOCIAL STUDIES
50     50 Profesional Development
6     BUSINESS EDUCATION
65     65 FRABOOMERANG
7     FOREIGN LANGUAGE
75     75 KA Software Product
8     Legacy = 8: No Description
80     80 CCI
89     89 Money Only EDC Wrkshps
9     GENERIC
99     99 Money Only Miscellaneou
I was asked to create master data info object for this. I created it but when I am loading it , I am getting an error that there are duplicate records.
What should be done? Will such data be still created as master data or an ODS ? Because there are duplicate records.
Thanks

Hi Eugene and Bhanu
I have the same issue. I have this master data flat file, with 2 fields . I am trying to load it . And the data looks like this
0----
1----
001 Work'g Words Spelling
2----
002 Vocab for Achievmt
3----
003 ETS95 Packets Program
4----
004 Every Day Counts
5----
005 Phonics We Use
6----
006 US94 History of US
7----
007 Masterng SAT 1/PSAT
I tried Bhanu's suggestion of ignoring duplicate records . I did not get any error but that I lost some data. So I tried Eugene's suggestion of shifting the fields .. I moved the second field to the frist place and saved and loaded it. I got this error.
"There are duplicates of the data record 2. with the key '3.' for characteristic 1.."
Any suggestions.
Thanks

Creation of master data info object- data coming form a 3rd party system

Hi All
i need to create a master data info - object which connects the customer and the corresponding plant..actually thios data is coming from a third party system and they have maintained 2 tables one for customer and one for the plant details and these 2 tables are connected through some common id which populates unquie id for each customer and is maintained in the plant table with the same id...now both these tables have to be merged together and to be cretaed as a single info object..can any one suggest me as to how to proceed with it.
Regards
Shilpa

Hi,
Create a Z-InfoObject with the same format as is used in your 3rd party system for the commonid.
Add Customer and Plant as navigational Attributes.
Create an infosource with these three fields.
Unload (in a CSV-file) the commonid with customer and plant from your 3rd party system.
Load these data to BI into your newly created Z-commonid InfoObject.
Success,
Udo

No master data info objects' attributes in infoset

Hi All,
I am trying to create an infoset out of two ODSs. When I tried to create a report on this infoset, I cannot see the attributes of the master data info objects. What to do at this point?
Regards,
Mike

Ok now I am confused.
1. Replicate data source: these are all z objects. And it is a flat file extraction . In the Q system , when I go to source system tab and right click on the BW Q System , I can see replicate data source. Is that the point that you are talking about?
2. Should I transport the transfer rules ?
Thanks
Message was edited by: Pooja Mittal
Message was edited by: Pooja Mittal
Message was edited by: Pooja Mittal
Message was edited by: Pooja Mittal

Secure an attribute of a Master Data Info Object

Hello,
We would want to secure one of the attributes of the Master Data InfoObject. For eg. In Material master data info object, we have price as an attribute. We would like to impose a field level security on the price field.
Anyone please let me know how we can do it ...

Steps:
1. Make the info object authorization relevant. RSA 1- info object in change mode and in bex tab therw will be a check box and check that to make it authorization relavant.
2. go to RSSM - create an authorization object.
3. In PFCG, set the values for this object.
4. Whereever this object is sued, the system will check for authorizations.
Ravi Thothadri

Reg: No enries in SID table of attribute of a Master data info object

Hello SAP Gurus!!!
I Hope everyone is doing good.
I found some issues , when i loaded master data into master data info object in sap bi.
I have an object which is holding master data (master data info object)---ZEMPID(employee id)
I have attributes for this object are : Emp name , Emp Phone number
I loaded master data attributes into ZEMPID. I could see some entries in SID table of ZEMPID char info object .
But i am unable to see the entries in SID table of Emp name , which is a attribute of master data info object.
According to my knowledge whenver we load data into sap bi , automatically sid values will get generated for that characterstic info object.
so here in this case Emp name is also a char info object , so whenever we load the data into master data info object , we have to see the entries in SID table of Emp name also .But i am unable to see the entries in the SID table of Emp name. .
So what might be the problem ?
Awaiting for your valuable answers!!!
Cheers!!

Hi Rajavamshi,
You are right whenever we load data in BI, it will create SIDs for info objects.
But it will create SID in 'S Table' not in X/Y - Table.
If master data is enabled for Emp name then it will create SID in X/Y table. I think the master data is not enabled for attribute(Emp Name).
Please check in S Table, the SIDs will be there.
If it is not the case, activate the attributes info objects and EMPID info object and load the master data and run ACR for EMP ID.
If it is not working still, then do master data check in RSRV.
Regards,
Vignesh.B

Duplicate records in master data info object

dear friends,
i got a standard infoobject called 'A' and it has got some attributes B,C,D,E for that one standard datasource with the following fields A,B,C,D,E exists and i loaded data. abapers had created a z table with the following P,Q,R,S,X,Y,Z fields. 'P' holds the same records what the 'A' infoobject holds. my requirement is to create a report on the following fields:
P,Q,R,S,B,C,D,E
WAT I DONE IS I CREATED A GENERIC DATASOURCE FOR THE FOLLOWING FIELDS P,Q,R,S AND I ADDED THE STANDARD INFOOBJECT CALLED 'A' WITH THE FOLLOWING FIELDS: Q,R,S.
AND I CRTEATED AND SHEDULED THE INFOPACKAGE FOR THE STANDARD DATASOURCE(A,B,C,D,E,) TO STANDARD INFOOBJECT(A,B,C,D,E,Q,R,S). NEXT I CREATED THE ANOTHER INFOPACKAGE AND SHEDULED THE INFOPACKAGE AND SHEDULED FROM GENERIC DATASOURCE (P,Q,R,S) TO STANDARD INFOOBJECT(A,B,C,D,E,P,Q,R,S) WITH TRANSFER RULES P->A,Q->Q,R->R,S->S. AFTER LOADING THE DATA I AM GETTING DUPLICATE RECORDS.I WILL GIVE THE TABLE HOW MY MASTER DATA LOOKS LIKE
A B C D E P Q R S
1 2 3 4 5
2 3 4 5 6
3 4 5 6 7
1         6 7 8 9
2         7 8 9 3
3         4 6 2 1
THIS IS HOW MY MASTERDATA LOOKS LIKE BUT I NEED IN THE FOLLLOWING FORMAT:
A B C D E P Q R S
1 2 3 4 5 6 7 8 9
2 3 4 5 6 7 8 9 3
3 4 5 6 7 4 6 2 1
PLEASE LET ME KNOW
THANKS & REGARDS,
HARI

Hari,
   why don't you enhance the Masterdata info object?. You are suppose to see overwritten records. infoobject A is primary key in the table.
try to enhance the masterdata Datasource. you will get required output or create masterdat generic Data source.
All the best.
any questions let us know.
Nagesh.

How to find master data info objects. Partner function and customer class.

hi,
Can you please tell me what are the available extractors for Partner Function (PARVW from VBPA)and Customer Class (KUKLA from KNA1).
I hope these fields are master data. I checked in 0customer. But I didn't find it. There is a info object (Business partner). Is it the same?
pls reply

I will admit that I am not familiar with ECC and there may be different interpretations of what KUKLA means and different means of extracting Customer information to/from ECC.
However, for us, when extracting Customer Attributes using the 0CUSTOMER_ATTR datasource in R/3, we map KUKLA to 0CUST_CLASS. They are both set up as 2 CHAR. That is not to say that you should also. You can map it to a custom infoobject in BW as long as you set it up as an attribute of 0CUSTOMER. KUKLA is available in the standard datasource 0CUSTOMER_ATTR in R/3. When looking at what is available in the infosource for 0CUSTOMER in BW, 0CUST_CLASS is a logical choice to map.
As far as VBPA-PARVW, VBPA is not a source for master data for 0BPARTNER. VBPA contains the business partners associated with Sales documents. So if you are going to create a data provider (cube/ODS) in BW and VBPA-PARVW is part of the transactional datasource in R/3, the you can map it to 0BPARTNER in your cube/ODS.
Hope this helps.

Master Data Info Object is not updating Attribute data

Dear Sdns,
We are loading master data to ZCOMP_GL Info object through flat file extraction... ZOMP_GL have four attributes.. Leaving three of the attributes Only one of the attribute which is CS_ITEM holds the data.
We loaded data ffrom flat-file.. It laoded sucessfully upto the PSA and data is available... And when we runned DTP the load was successfull.. In the manage screen of the Info object it shows the records are added successfully.. But when we see the data in ZOMP_GL. We are not able to see the Data for CS_ITEM which is attribute.... Also we runned Attribute change run..
Kindly Advice me..
Warm Regards,
Aluri

Activate the data in the info object.
Ravi Thothadri

BPS Web New master data (info object value) added to planning area

Dear all,
I am working with BPS in Web.
Here you can add lines.
Request:
The user wants to add a new value of the lead column, ´
which is not yet active in the master data of the info object envolved here.
He simply wants to enter the new value in the opened new line and the
system should store(add) that value to the master table,
so that he could directly plan KF values to that new line.
I know that we can use FM 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
to post directly new values to the bespoken info object.
Where and how could I add this function to the process.
Note:
It seems that the BSP dispatcher doesn't pass that line
because the "invalid" line is rejected in a step before ??
Many thanks for your help in advance !
regards
Paul

Vlad,
Transaction RSD1 gets you into infoobject maintenance and it more or less equivalent to RSA1 and infoobject althought they have some better listing facilities for infobject in infocubes than RSA1.
Paul,
Are you really sure you want to give your users the ability to create new master data without any validation and potentially compromising your data quality and data integrity?
Sometimes in BPS you have to ask whether or not you should even though you could...

Program to activate update rule for master data (info objects)..very urgent

Hi all,
I have an info provider(A0CUSTOMN). For this the update rules are not active.In production system i am not able activate.Please let me know if there is any program to activate the update rule for masterdata(info object).
Thanks=points
Manjula

Hi Manjula,
Leave the id and infocube field blank. Just provide the infosource name.
BTW is this a direct update master data object? In that case all this is not relevant.
Check if it appears as an Infoprovider.
I did not ask enough questions to start with.
BR/
Mathew.

Loading Error for an Master Data Info Object!!

Hi all
I am getting this error for set od records...But actually ...there is no data in that...How it reflects as duplicate records...Pls tell me wht is the solution for this??U can chk the attachment as well as there is no data for the column PE FULL NAME.....   which is the error stack in DTP..
But I can see the data in PSA for the particular data packet & record numbers...
Pls help with regard to the issue.
Error Information:
Diagnosis
There are duplicates of the data record 2 & with the key
    '000000000000000000000000000001E &' for characteristic ZPENAME &.
System Response
Procedure
If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.

<i>1).If source field length is more than target field length..Is it wrong if we do mapping like this?????</i>
Yes it is wrong, its okay the otherwise though.
<i>2)Do u have any idea of long text which exceeds 60???I saw the blog of eugene ,but not sure how far it works..Can u guide me with regard to it as my datasource is created by function module..</i>
I never dealt with it...sry !!

Regarding Master Data info Object

Hi Guru's
I am working on Recruiting module. I need to extract the application activities data to Application info object.
i need to build a report on the Application activities , Application and candidate info objects . so i have build a infoset on the three infoobjects.
In my Application Activity Info object. i have Application Activity , activity Type, Activity start date, due date,application infoobjects as display infoobjects.
so i added zfidate, zsedate,zofdate,zofadate infoobjects to application activity.
i need to write the code in the start routine of transfer rules of application activity infoobject to populate the data for those z objects based on the due date of the activity.
For example :-
Out put of the application activity infoobject before customization.
Applicationactivity    activity type activity des                   duedate        application
Xyz123abc456     9140     First Interview     08/25/07    545356
Xyz123abc567     9145     Second Interview     08/26/07     545356
Xyz123abc678     9500     Offer Made                     08/27/07     545356
Xyz123abc789     9600     Offer Accepted     08/28/07     545356
I want the output of the application activity after customization in to single record based up on the application.
Application activity      Activity type    Application     ZFIDATE     ZSECDATE     ZOFDATE     ZOFADATE
XYZ123ABC456     -
           545356     08/25/07     08/26/07     08/27/07     08/28/07
Can we arrive at this output. if so please let me know the sample code.
Thanks
Roopa

Hello Kedar,
Please open this thread on the SDN Forum "DATA WAREHOUSING".
I already talked with a BW colleague and he suggested to try there, it seems to be their issue.
Thanks and regards,
Michel Bohn
SCM-APO forum moderator.
Edited by: Michel Bohn on Mar 28, 2009 12:29 AM

Master data Info object description does not appear completely in report

We have master data with properties (Short txt ) and we changes to Medium text length . We change in the Query and complete description appears in Bex analyzer but cutting description in the Web template(standard ).
Any help will be appreciated.
Thanks in advance.
SK

Hi,
You have mentioned that the complete description shown in BEx Analyzer,but not in WAD output.
Open that query in QD and then execute the query,check whether it shows the complete description.
Try running in through RSRT Tcode and check for the proper description.
If it doesn't work only in WAD,then you just create a new web template in WAD and assign that query,save and execute the template and check.
Rgds,
Murali

How to find unassigned master data text objects in process chain in bi

Hi
Please let me know how to find the unassigned master data text objects in process chain.

hi,
actually if u want to find that , is ur Unassigned Infoobject in present in process chain or not, , that u can find out just by right
click on your DTP (master data Txt datasource--> Master data text ), if this is present in Process chain, then on ryt click, the process chain option will be active. by clicking over that u can find the name in which this exists.
thanks.

Key figure - master data info object

Similar Messages

Maybe you are looking for