Key figure notes in the PB

Hi,
My user has maintained a notes in the Data view and he is not able to see it in the data view but the notes he has maintained is clearly seen in /SAPAPO/SDP_NOTES. Kindly suggest...if it has something to do with authorization or data maintenance or any other reason
Thanks,
SS

SS
Check SU53 to see if its an authorization issue. Also verify if the user is at the same planning level (drill-down) in the planning book compared to /SAPAPO/SDP_NOTES.
Rishi Menon

Similar Messages

How to filter Key Figures - not using the GUIDs

An example How to filter Key Figures may look like this:
http://XXX.com:8000/sap/bw/BEx?sap-language=DE&bsplanguage=DE&CMD=LDOC&TEMPLATE_ID=XXX&FILTER_IOBJNM=41F68RV4ZB5VYSARODYU70CAQ&FILTER_VALUE=41F68SAI18DB01DO023IR49QA
The GUIDs consume the space in the URl. Is there a way to work with an alias.
To use the technical name of a Key Figure defined in the Query does not work.

Hi Cherie,
This is exactly the type of problem that I'm currently trying to figure out. I'm trying to following your solution but I'm not clear on how you actually achieved this in you last note. I want to dynamically select actuals/budget column fields based on what period I enter. I thought about creating 12 separate RKF fields for actuals and 12 separate RKF fields for the budget reforecast and outputting these all and then doing some VBA to hide the fields not required based on which period was selected... how is your variable ZFYAPER7 defined and calculated?
Cheers

Key figure flag in the planning layout

Hi,
Can anyone explain the importance of the key figure flag in the planning layout?
Regds
Pavan.

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

How to find key figures not created in a Structure.

After using Where Used on a selection variable Z_FISCPER3_M_SV a list of Key Figures appear. I wish to amended these Key Figures as the selection variable used is incorrect. However, I cannot find these Key Figures in the Structure? Does anyone know how to find Key Figures not created in a Structure.

Thanks for such a quick response.
I am assuming the following about the table :
-     Column u201CCALDAYu201D contains a date value for each day the Index is active.
-     Column u201CBIA_USEDu201D contains a value that is iterated for the given day each time the Index is used.
-     Column u201CBIA_NOTPOSSIBLEu201D contains a value representing how many times a query could not access this Index.
-     Column u201CNO_BIAu201D tells if a BWA Index exists at all on any of my BWA Blades
-     Column u201CBIA_TECHINAu201D ????????
-     Column u201CBIA_INAu201D ???????
-     Column u201CDB_FALLBACKu201D ???????
I am not sure if my understanding of the column is correct. Can you tell me they are? The columns with u201C???????u201D mean I have no solid understanding of how to use these columns at all.
Thanks

Unable to find key figure attribute in the cube

Hi all of you,
I am struggling while working on this "Display Attribute". Please read this and help me out.
I want to create attributes and then load data into a cube.
I had created an InfoArea IA_ATTRIBUTES.
Under this IA_ATTRIBUTES I created an InfoObject Catalog IOC_DISPATTR.
Under IOC_DISPATTR I created an InfoObject ZCUSTNUMB which is my primary key.
After defining the ZCUSTNUMB I clicked on the Attributes tab and entered the other attributes like ZCUSTNAME, ZCUSTADDR, ZCUSTREGI, ZCUSTLOCA, and ZPRICE. All of these attributes except ZPRICE are characteristics WHILE ZPRICE is a keyfigure.
I've also made sure that the Attributes only check box is not checked for all the characteristics.
I then activated the InfoObject ZCUSTNUMB and came back.
Now I created a cube DISP_ATTR. I clicked on the InfoObject Catalog button and selected the above mentioned catalog IOC_DISPATTR and transferred the IOs from the template into the structure.
Now when I transfer IOs in this way all the IOs both characteristics and key figures should come into the structure of the cube isnt't. But only characteristics have come and the keyfigure ZPRICE hasn't come.
Moreover when I hit on the key figures tab and hit on the find button and find ZPRICE I am getting a message saying "No (further) object found". So when I hit on the create button and create a key figure ZPRICE I am getting a message saying "InfoObject ZPRICE already exists as Key Figure (please rename)".
However when I double click on ZCUSTNUMB which is the primary key, the screen "Display characteristic ZCUSTNUMB: Detail" opens. In this screen I find all the attributes in the attributes tab that I had defined while defining attributes including ZPRICE.
So what I don't understand is when all the characteristics IOs are visible under the characteristics tab then why am I unable to find the key figure ZPRICE under Key figures tab when I created it while defining attributes. Can anyone please explain me this situation and tell me how should I find the key figure ZPRICE so that I can go ahead and create the cube.
Lastly I want to know what are the differences between InfoObjects and Attributes. Is an attribute also an IO?
Please explain.
I would appropriately rewards your answers.
Thank you.
TR.

Hi Oscar Romero,
Thanks a lot for your reply. As per your suggestion I created another IOC FOR key figures called IOC_ATTR_KF. In this IOC I had included the key figure ZPRICE and activated the IOC.
Now I have created a cube again ATTR_DISP. On the right corner where we find 5 buttons I clicked on the InfoObject Catalog button. The screen "Select InfoObject Catalog" opened displaying the IOC_ATTR_KF that I had created earlier. When I double clicked on the IOC_ATTR_KF I got the msg asking "Do you want to transfer the IOs from the template into the structure?" I clicked on Yes. But I don't find any key figures either in the Structure pane or in the Template pane. Both the panes are empty.
I also clicked on the All InfoObjects button and searched for ZPRICE but again I am getting the message "No "further) object found". However when I try to create ZPRICE I am getting the message ZPRICE already exists.
Please explain me why this is happening like this?

My F11 and F12 keys do not affect the sound,

My F11 and F12 keys do not affect the sound, The only way I can change the volume is through system preferences. How can i fix this?

1. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own"
2.Reset PRAM. http://support.apple.com/kb/PH4405
Best.

AD CS Web Enrollment Error - "public key does not meet the minimum size required"

I've installed a standalone root CA and a enterprise subordinate CA in our environment - both are Windows 2008 R2. Everything is working except for Web Enrollment using a custom User template. I duplicated the default User template and choose
2003 Compatible for the new one. I changed the minimum key length to 2048 and set the validity period to 2 years.
We'd like to avoid using the Advanced Certificate Request page, so I modified certrqtp.inc to point to the new template:
Else
' Request types for enterprise
rgAvailReqTypes(0,FIELD_TEMPLATE)="User-custom"
rgAvailReqTypes(0,FIELD_FRIENDLYNAME)=L_UserTemplateCert_Text
rgAvailReqTypes(0,FIELD_CSPLIST)="Microsoft Enhanced Cryptographic Provider v1.0?Microsoft Base Cryptographic Provider v1.0"
rgAvailReqTypes(0,FIELD_CSPLIST2)="Microsoft Base Cryptographic Provider v1.0?Microsoft Enhanced Cryptographic Provider v1.0"
rgAvailReqTypes(0,FIELD_EXPORTABLE)="True"
nAvailReqTypes=1
End If
I also ran into this issue where Web Enrollment jumps straight to the Advanced page if the original User template isn't present on the CA:
http://social.technet.microsoft.com/Forums/en/winserversecurity/thread/9ab514bc-1f9f-424e-b70d-705874d9c623
So I have both User templates loaded on the CA, and I get this error back when attempting a certificate request using IE 8 or 9:
Your certificate request was denied.
Your Request Id is 25. The disposition message is "Denied by Policy Module".
Contact your administrator for further information.
Looking at the CA's Failed Requests section, I see this error:
The public key does not meet the minimum size required by the specified certificate template. 0x80094811 (-2146875375)
I double-checked our custom template and it does specify 2048 as the minimum key size.
Also, when trying with Chrome 11.0, I get an extra option during enrollment asking for a key size (1024 or 2048). When I choose 2048, the certificate request succeeds. I don't get the key size option when using IE, though.
We'd like to get this working with IE if possible. Any ideas?

We had the same error message. The problem turned out to be on the requesting computer, not the server. When we went to renew a cert in IIS on a server it was generating a 1028-bit key request. Since the minimum on the server was set to 2048-bit
the request failed. So, there's two ways to handle this. You can change the certificate template on the server to have a minimum set to 1024-bit or you can have IIS submit a new request for a certificate and choose 2048-bit as the size of the key during the
wizard. We opted to have IIS request a 2048-bit key. The same would apply for whatever computer, device, or software you are using to form the certificate request.
Your message is pretty old, but I am running on the same problem right now. I've added a custom template to select (with 2048) minimum length, but the webpage from the IIS by default provides just 1024-bit. Where can i optimize the IIS to use a 2048-bit
key when requesting the certificate?
When I open the same site with Firefox for example, i got a listed option (Medium / High Strength) to choose for the encryption. It seems that the high strength is >= 2048-bit.

All of my tools in PS 6 have a "cross" icon and I can't use them, like the clone tool. I have reset all tools to no avail. The bracket keys do not change the size. Any help?

All of my tools in PS 6 have a "cross" icon and I can't use them, like the clone tool. I have reset all tools to no avail. The bracket keys do not change the size. Any help?

Yep, I discovered that. Thank you very much for the prompt and accurate reply.

Key Figures not showing up in the Query disigner

I added a key figure to a characteristic as an
attribute, but it is not showing up in the Query designer
any idea why
Raj

Hi RajShekhar,
This KF that you have added as an attribute to a char will not be available in the Key Figure section. Open the dimensions and find the char for which you created this attribute. Open up the attributes under it and you should find the KF. If you need to use this KF value in a calculation, then you will need to create a formula variable to pull in its value.
Hope this helps...

Key Figure values in the Bex Report are different from the cube

Hi all,
When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
Could some one help me find a solution to this issue.
I look forward to hearing from the experts.
Regards,
S.P

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

Key figure display in the query

Hi experts,
In a query in the columns we have 3 key figures. I dragged a characteristic into the columns and
executed. Now for each value in the char it is showing all the 3 key figures.
My requirement is, for only one keyfigure value the characteristic should show the value. For the
remaining 2 key figures it should not show.
The remaining key figures to be displayed as normal.
How to get this ?
Regards,
Nishuv.

Hi Rao,
Thanks for the reply...
My requirement is :
We have netvalue and cutomer outstanding key figure in the columns.
I want to drag terms of paymnet characteristic into the columns.
By doing this the query output will be as follows:
Terms of payment
Net value|Customer outstanding
But my requirement is Terms of payment should be only for Customer outstanding i.e
Terms of payment
Customer Outstanding
It should not take the Netvalue under terms of payment.
Netvalue should be displayed outside.
How to do this ?
Regards,
Nishuv.

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Disaggregation of Key figure not in proportion at monthly bucket

Dear Expert,
Please find the below case.
Here Key figure 2 is disaggregated based on Key figure 1 (Calculation Type P) also we maintained Time based disaggregation K.
The issue is - if you check total, it is 13 for both key figures as shown in below screen shot.
But region wise (Detail level) if you checked, it is not in 1:1 proportion and it is causing problem for us.
For example Region 2 having value in KF1 as 2 for Week 11.2015 but after disaggregation it got nothing on KF2.
(The reason is Key figure 2 is having value in week 12 and week 13 and nothing in Week 11)
We tried 2 different approach to get 1:1 proportion in Monthly bucket, but it could solve our problem.
Approach 1-After Key figure2 calculated in Weekly bucket, Reset Key figure 2 at total level in Monthly data View and enter the Total of Key figure 2 at Total level in Monthly bucket.Check the result at detailed level.
But in this case it is calculated for week 10, 11, 12 and 13 as 0, 9, 3, 1. (We want Key figure2 as per original calculation i.e it should be 12 and 1 in week 12 and 13 respectively)
Approach2 -
Approach 2 - Add another New Key figure as Key figure 1 Total- which sum the Key figure1 at detailed unit at Month level and then disaggregation of Key figure2 based on this new KF.
Its working for this scenario but different scenario is not working.
For example- here region 3 and 4 affected.
If disaggregation at Month level is corrected, our issue will be resolve.
Waiting for your feed back.
Thank you
Sachin

Hi,
In Planning Area u2013 Key Figure settings, did you try to use u2018N - No disaggregation in timeu2019 for KF2 key figure ?
This will mean that copying will occur in technical periods of the storage bucket profile and not the way it happens now.
Other option:
Now, you storage bucket profile and also the planning bucket proifile are in Days/Weeks/ .Months
Is it necessary for your user to view data in daily buckets ? Can the user view the data in weekly buckets only (and not in daily buckets) ?
Your planning bucket profile can be in Weeks/..Months .
This way your displayed data will be in weekly buckets.
Regards
Datta

Retractor for Statistical Key Figures Not Sending Values

I have configured the standard retractor for primary costs and stat key figures based on all the documentation. Primary costs retract perfectly. Stat Key Figures do not send over the values.
I have configured UPBR_RETRACT with UPB_RET_STKEYFIG. In the update rules the only thing I have changed is assigned ZRATENU to 0BPS_PRICE and 0QUANTITY to 0BPS_QUANTITY. I copied the delivered planning level 4EXP0004 to a Z level assigned to my custom cube. In UPBR_STRUCT I assigned to the correct structures /1SEM/_YS_CHAS_210ZEXP0004 and /1SEM/_YS_KYFS_210ZEXP0004.
From BPS, when I run the retractor I get the message that "Retraction: Update completed without errors. Number of records:   56". All of this tells me things are running fine. My parameter group is setup as follows:
Retr. R/3 Comp.          6
Retractor Control          3
Delta Update          0
Destination          DE1CLNT209
Test mode Is Active          0
I go over to ECC and look at KP46. The stat key figures by cost center have been transferred but the planned values all show 0. When I go to table COSR, I see 0 in the planned fields.
Has anyone had this issue and do they know how to solve it?
Thanks,
Cherie

Dear Chrie,
Can u explain, what are the keyfigures that are not getting retracted to R/3?
If quantities and Unit of measure is not getting retracted, you will have to apply the note 889634. Check once.
If you are using the function modules UPR_COST_PLAN_INIT and UPR_COST_PLAN_EXECUTE, then make sure that you pass only Object Currency (0AMOCCC) values to it, as it supports only those.
Regards,
Srinivas Kamireddy.

Key figure not displaying in SNC Web View

Hi All,
I have added a Key figure in Data Matrix View and its not displaying in SNC Web view- SMI Monitor.
Is there any activation settings after adding key figure in Data Matrix View, please help.
Regards,
Vikram

Hi,
You can try following steps,
1) Clear the Cache & Re-login.
2) Ensure in Setting the Key figure " Invisible" check box is not selected.( SNC 7.0 v)
3) Check the related Product is applicable for the new Key fig added, like if its a SMI Product & you are expecting to see for a PO key figure...
Regards,
Vasu

Key figure notes in the PB

Similar Messages

Maybe you are looking for