Key figure, number of decimal places are not showing in report output

Dear experts,
At cube level PO qty value is getting 0.010 where as in bex report output of PO qty showing as 0. I have chosen decimal places as 0.000 in key figure additional properties tab. In query designer also I have chosen no of decimal places as 0.000 in display propertiesu2026please help me out. How can I get 0.010 value in report o/p.
Thanks in advance.
Srivalli.

Hi,
Try to run the query in RSRT. CHeck if you are getting the same output. Also make sure that in the reports all the filters are same as you have applied in the info -cube to see the data.
- Jaimin

Similar Messages

  • Decimal places are not permitted for asset useful life

    Dear SAP experts,
    I need to post a new net book value on a new depreciation area 50 for fixed assets. The new deprecation for depreciation area 50 will start in July 2011 on all existing (also fully depreciated or to be disposed) assets with a different useful life unlike the book deprecation for depreciation area 01. The depreciation method for depreciation area 50 is straight line.
    I have a requirement to assign the new useful life for the depreciation area 50 which may contain decimals, for example 5.5 years. Basically, I need to depreciate the asset for the remaining 6 months of 2011 and the entire 2012 to 2016.
    SAP does not allow decimals on asset useful life (Decimal places are not permitted, Message no. 00011).
    Have you come accross a similar situation? How can that be managed via depreciation methods and keys?
    Please advise.
    Thank you in advance,
    Inna

    Hi Inna,
    You can define your useful life of 5.5 years for the depreciation area 50 as follows:
    Useful life : 5
    period : 6
    here, useful life(5) represents 5 years and period(6) as 6 months which gives you 5.5 years starting depreciation from Depreciation calculation start date.
    Kind Regards,
    Mehul

  • Decimal Places are not Permitted for Chile Country

    Hi All,
    In OVA8 settings for Chile country at the field max.doc value, i am not able to use the decimals. getting error message as Decimlas are not permitted (Message no - 00011). checked OY04 - there is no decimals for Chile currency. checked - OY01 Dec.Pt. format as 1.234.567,89
    For Argentina, Peru and Uruguay same settings has been done and i am able to save the decimal points in OVA8 at the field max.doc value.
    Please let me know if there is any specifis settings for Chile or SAP NOTE
    Thanks,
    Mahesh

    HI,
    just looking at a brand-new ECC60 / EhP4 system where nobody changed OY04 settings.
    I can find CLP (Chilean Peso) in the list with ' ' decimal places, so thats why there are no decimal places allowed.
    Check again OY04, if you find an entry for CLP and NOTHING is maintained it means that ZERO dec. places are allowed.
    If you find an entry in OY04 with a number of decimal places >0 than this decimal places are allowed.
    If there is NO entry for a given currency then its used with 2 decimal places (SAP standard).
    So OY04 is only for the currencies that should be treated different as SAP standard.
    Best regards, Christian
    Edited by: Christian Ortner on Feb 3, 2011 5:09 PM

  • Decimal places are not displayed in smartforms

    Hi,
      Iam having a quantity field which has length 13 and decimals 3. While debugging it has the value has decimal places but while displaying it does not have the decimal places. Only the whole number is displayed. Can anyone help how to rectify this one.Thanks...
    Thanks,
    Rose.

    Hi,
    The format of a quatity field will be based on the associated unit of measure.  Each unit of measure will have a number of decimal places (as defined in table T006 field DECAN) defined to match how the quantity is typically recorded (e.g. ST or 'each' has no decimal places as you could never have half and each).
    Regards,
    Nick

  • Description of GL are not showing in Report Painter

    Hello,
      Friends I've made the trail balance in report painter but my problem is the GLs description under lead column are not showing. I checked the lead column and kept the radio button on key and description under report layout but sill its not working. Please suggest...
    Quick reply will be more appreciated.

    Hello sayujya Patil,
    Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
    Please reply...
    Thank You.

  • Decimal Places are not permitted

    Hello,
            The Vendor Invoice amount in Rs 25920.72 and the currency is INR, When i am entering in T.code FB60 i am getting an error "Decimal Places not permiited". i made changes in T.code SU01 (Maintained User) and T.code OY01 (Defining Countries in SAP Systems) respectively but still getting the same error as "Decimal Places not permitted". After that i checked in T.code OY04 (Set Decimal Places for Currencies) and there Currency INR is reflected and "no decimal places"  field is assigned to it. What should be done. Please Help!
    Regards
    Ashwin

    Yes. you are right, once done the transaction for INR
    Your are not suppose the change decimal settings.
    So it will effect old transaction.
    Please check the note mentioned. below. Hope it helps.
    Note 172410 - Percentages of completion with decimal places
    regards
    vamsi

  • Decimal Places is not showing in Qty field in COPA report

    Hi,
    I have made a COPA report using one form that I have made it through TC:KE34.
    I have used ABSMG for Sales qty in my report.
    What I am observing in report, the qty is  not showing the decimal places for exmaple 6.032 MT but it gets round over to 6 MT.
    I want the system should show the 3 decimal places for the Sales Qty.
    How to do resolve this.
    Regards
    Kami

    Hi Ajay,
    No this is somthing new you mentioned. I havent tried to change the number format after executing the report.
    Please let me know how to do that. I am using Object ALV to display the report and I am not getting any option in the menus to change the number format.
    Also I noticed one thing, In other output format like drill down report its coming correctly , only in Object ALV output format its showing the rounded values.
    Please let me know the path.
    Regards
    Kami

  • Values are not showing in report

    Hi,
    I have created a report with EVDRE containing several columns. When I use MemberSet: "SELF" for all columns, it shows me the data I have uploaded correctly.
    However, if I choose "MEMBERS" for any of the columns, the value field is empty. This is totally incorrect as I get several rows with the "MEMBERS" option, and one of the rows contains exactly the same filtering as when I use "SELF" for all columns. So that row should show a value, but it is empty.
    If I choose SUPRESS:Y, it returns 0 rows.
    Example ("SELF" chosen):
    NAMEID, ADDRESS, TIME, SALARY
    A, X1, 2009, 10000
    Example ("MEMBERS" chosen for NAMEID):
    NAMEID, ADDRESS, TIME, SALARY
    A, X1, 2009, (blank)
    B, X2, 2009, (blank)
    C, X3, 2009, (blank)
    Has anyone encountered this before?
    Thanks,
    Sam

    Hey Sam,
    I have some additional questions to help me understand what is going on.
    What other dimensions exist in the application this report is running in, besides NAMEID, ADDRESS, TIME, SALARY?
    What dimensions are in the COLKEYRANGE, besides SALARY?
    What are your expansions set as (SELF, MEMBERS, etc) for the other row/column key dimensions?
    Are you sure that all the other dimensions are not changing when you go from SELF to MEMBERS?  I know this is probably not the case but I thought I would ask anyways.

  • DESCRIPTIONS ARE NOT SHOWED IN REPORT PAINTER

    Hi, I have a problem with the report painter, because i am run the report but i realize that  if the master data(Commitment item ) is not created for the next year  example 2008 and  I am running the report for the year 2007, when the report is generated the report does not show the description of the commitment item ...
    Anyboy has a suggest
    THANKS A LOT!!!
    Pat

    Hello sayujya Patil,
    Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
    Please reply...
    Thank You.

  • Master data(0vtype) values are not showing in reports.

    Hi Gurus,
                 I have an info object '0VALTYPE' with 'TEXT'. I already loaded the data in
    for this object. but in reporting level i am getting the values # and 20(actual)
    even though it has so many vales(ex: 10(plan)etc). but all the values are not populating in the query.how to get all the values in reporting level.
    Thanks in advance.
    Thanks
    Raju.k

    Hi Raju,
    You have already confirmed, but still please go to infoobject 0VTYPE again and check the master data to see all values exits there.
    If yes and still in reporting you can not see those, try doing the following:
    1) Right click on 0VTYPE and click on "Activate Master Data", and/or
    2) Go to Menu --> select Attribute change run --> select 0VTYE and execute the changes.
    Regards
    Pankaj

  • Critical Actions are not showed in Reports

    I'm having a problem in displaying user analysis report in management view.
    I have uploaded SAP default rulesets and it does contain some defined critical actions. I can also display critical actions by user in risk analysis reports.
    But the problem is in "User analysis Report", the number of critical action&role is always 0. 
    Does anybody know the reason?
    Is there anything that I'm missing?
    Thank you&Regards
    Stellare

    Hi,
    if you are using CC 5.2: have you checked the field Critical Action and role/profile analysis in Configuration->Background job->Schedule Analysis ?
    I suppose you are talking about that there is no critical violation in Informer.
    Hope this help you
    Emilio

  • My internal speakers are not showing up in output preferences

    Head phones work fine. As soon as I unplug the head phones the sound icon goes from black to greyed out. The port works fine because if it was stuck it would not go from black to greyed out every time I plug and unplug the headphones. So the sensor is working and letting me know when the head phones are plugged in so please don't suggest a jammed port as an option. If it was stuck the icon would stay on constantly. When I look under system preferences>sound>output I only have headphones and Apple TV as an option. The internal speakers have disappeared from the list. When I reboot the macbook I get the familiar sound of the start up so I know the speakers work. I believe the problem started when we got Apple TV AirPlay but it could be a coincidence. Also I have been looking through the forums dating back to 2006 and have not found any thing that works.  Thanks for any new information.

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM

  • Can not change the number of decimal places in the normalization of result

    dear all
        i want to see the proportion of some data, for example, the income of May is 300, and the total income is 1000, i need to display it like 33.33% . so i set the
    Calculate single values as normalization of result, and then it display 33.333%, i like to display only two number of decimal places, so i set the number of decimal places as 0.00, but i doesn't work, it still display three decimal numbers.
        maybe you say i can use the percentage function like %CT %GT %RT, but i need to allow external access to my query, so the i can not use those functions.
        can somebody helps me ? your advice is appreciated.

    hi,thanks for your advice, but that doesn't suit for my problem.
    before i set the normalization of result, i can change the decimal values. After that i cann't.
    In your thread, someone proposes use the T-code OY04. but this wouldn't help. As i change to other key figure, such as user quantity, when i set normalization of result, it still display 3 decimal values.
    i think the point maybe lie in the normalization of result. please advise... thanks...

  • BEx Analyzer displays wrong number of decimal places after implementing BW patch

    Hey folks,
    we patched our BW 7.31 from PL10 to PL15 last weekend and now we got some issue with the number of decimal places shown in BEx Analyzer 7.x.
    One example for KF X
    Settings Info Object X
    Decimal Places:                         Not defined
    RSRT - Display X
    Shows 3 decimal places
    Query Designer Settings using KF X
    Number of Descimal Places:     0  [Use Default Settings: NO]
    BEx Analyzer Properties for KF X
    Decimal Places:                         0
    Resulting in BEx Analyzer workbook shows 3 decimal places instead of 0!
    Anyone with an good idea about that?
    Thanks,
    Andreas

    Hi Andreas,
    Have you used the list calulation like "Calculate Result As Average" or "Calculate Single Values as normalization of result" in the relevant key figures?
    For "Calculate Single Values as normalization of result",iIt is the known design that it is always displayed with three decimal places for normalized values, and the setting in Query Designer for
    decimal place doesn't take effect.
    For "Calculate Result As Average", the following note maybe relevant.
    2096911 - Decimal places in query result is wrong, if average is used and display precision is set to less than 3, it will always show 3 decimal places.
    Another clue is to check if the key figure is a Quantity type with unit, and what's defined in table
    T006 field ANDEC for this unit.
    Hope this helpful.
    Regards,
    Ceciclia

  • Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

    Hi,
    I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
    Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
    Thanks.
    Regards
    Mansi

    Hi Mansi,
    Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to  alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
    Regards,
    R.Brahmankar

Maybe you are looking for