Key Figure Planning in Marketing Planner ?????

Hi All,
We have to implement CRM Campaign Management for our Client. We have sligntly modified the standard Planning Profiles and Planning Layout in BW BPS and created a custom z-package. The RFC connection has already been setup with the BW system and is working/tested successfully. On CRM side we have created Planning Profile Group, having the required Planning Profiles which are created in BW BPS.
Now the problem is, we are not able to see the Planning Layouts in CRM Campaign Management Key Figure Planning.
We really dont know what went wrong, or if there is some extra setting we need to do. I searched almost all the SAP HELP, but couldnt find any procedure or doc.
Can you experts out there help me in resolving this issue, if you have already faced similar problem it will be of great help.
Thanks & Regards
Vikas Sharma
[email protected]

hi Vikas,
Run the report ZBPPOBPS, BW-BPS stores application-specific statistic records that you can evaluate in transactions BPS_STAT0 and BPS_STAT1.
This tool collection provides extended functions to monitor and analyze the performance of your planning applications.
Reward with points.
cheers,
Mark

Similar Messages

ERROR: Key Figure Planning

Hi All,
Im very new to SEM-BPS, can someone help me in resolving the following issues.
I want to do Key Figure Planning for Marketing & Campaign Planning in CRM.
     I created few planning areas with all the required elements in BW-SEM-BPS.
     RFC destination from BW to CRM and CRM to BW is defined.
Now Im getting following errors, in SAP CRM {SPRO>CRM >Marketing>Marketing Planning & Budgeting>Key Figure Planning > }
     While defining Planning Profile Group F4 Help is not working for selecting Planning Profile from SEM-BPS.
     While doing Manage Key Figures - Function module UPC_FW_START_RFC not found (Message no. BL001)
While creating Marketing Plan and Key Figure Planning following errors appear.
     Function Module UPC_PROFILE_GET not found (Message no. BL001)
     Function module "API_SEMBPS_PLANSTRUCTURE_GET" not found
Can someone please provide me details how to resolve the above issues.
If anyone can mail a doc. which lists all the steps to be followed while integrating SEM-BPS & CRM and doing Key Figure Planning will be of great help.
Thanks
Vikas Sharma
[email protected]

Please see the following message:
Re: "API_SEMBPS_PLANSTRUCTURE_GET" error while doing Key Figure Planning
Regards
Marc
SAP NetWeaver RIG

SEM "key figure planning" and "planning workbench"

Hi All,
I get error messages when trying to run "key figure planning" and "planning workbench"
I've setup the rfc (Define RFC connections) and the logical systems (Define target systems):
MKTPLBW     MKTPLBWRFC
MKTPLCPRO     MKTPLCPRORFC
MKTPLMB     MKTPLMBRFC
MKTPLR3      MKTPLR3RFC
MKTPLSEM     MKTPLSEMRFC
Errors:
"key figure planning" : Exception condition "CNTL_ERROR" raised.
"planning workbench": Access via "NULL" object reference not possible
Any ideas?

Hi M. Riaz Shaik
did you solve this issue?
How?
Im in the exact same situation.
Regards,
Memo Saenz

Error Message in Market Planner

Hi,
Does anyone know if the following error has any effect on "Warning System CLNT400BW0 cannot be reached" on the Market Planner? What do i have to do to eliminate this message? Call in basis/BW team?

Hi Noobie
this warning comes, because the BW client is not available for you to use and the marketing planner needs it for key figure planning and analysis.
But the marketing plan can work with this warning also but these functionalities will not be available to you
If you want this error not to come, you will have to get the logical system for BW created and connectivity maintained
Hope this helps
Regards
Rekha Dadwal

Read Only Key Figure in APO DP

Dear Friends ,
Need help in the mentioned scenario :
One Planning Book with two data views due to change in portfolio say regional manager and area manager .
Key Figure updation of market intelligence by regional manager in his data view to be shown in the data view of the area manager data view but with no access to write on the key figure - market intelligence by regional manager .
Please support .
Thanks

Hi Gurav,
Answer for your question:
1. If you want to make key figures as read only then you can goto design mode> select key figure> right click and select output only.
2. If you want to make seperate roles for both region manager and area manager you need not create two planning books but when you create roles you can assign data views to respective users. ( authorisation object is C_APO_PB, in that data view is APO_DVIEW)
Hope this helps.
Regards,
Jagadeesh.
Pls reward some points if it helps.

Key figures in BI

I am not able to see the drill down option for the key figures (Plan, Sales Actual etc) in the report. What should be done to have the drill down option.

Hi,
In a report drill down in only possible in a case:
Where you can have B from A.
Then you can have C from B and B from A.
And such kind of situation only arises in the situtation of Char.
And Key figures are Quantity Values or Amount, which all are can be summed up and all.
Hope this helps You.
Regards,
Soumyadeep.

Error message CRM_MKTPL043 in CRM_MKTPL key figures tab

Hi all,
In CRM_MKTPL, we choose the partner, enter the activity type, choose the sales organzation and enter the planning dates in basic data tab. Then we enter the product and then press the key figurs tab. And we take the error CRM_MKTPL043. We can't understand the error and so don't know how to solve..Can you help?

Hi,
We have to implement CRM Campaign Management for our Client. We have sligntly modified the standard Planning Profiles and Planning Layout in BW BPS and created a custom z-package. The RFC connection has already been setup with the BW system and is working/tested successfully. On CRM side we have created Planning Profile Group, having the required Planning Profiles which are created in BW BPS.
Now the problem is, we are not able to see the Planning Layouts in CRM Campaign Management Key Figure Planning.
We really dont know what went wrong, or if there is some extra setting we need to do. I searched almost all the SAP HELP, but couldnt find any procedure or doc.
Can you experts out there help me in resolving this issue, if you have already faced similar problem it will be of great help. Im working on CRM 4.0 (GUI)
Thanks & Regards
Vikas Sharma
[email protected]

Business Process: Final Demand Plan Key Figure in the past for APO DP

Hello APO process experts,
I have a BPX question for APO DP process owners, consultants or gurus:
1.- Have you ever seen in any SAP APO customer, that in their APO DP planning books, they chose or designed to update the Final Demand Plan key Figure in the past closed historical buckets with the Actual Sales?
Meaning that that in the Past closed historical Buckets, Actual Sales and Final Demand Plan, look exactily the same.
Meaning that they create a dynamic Final Demand Plan key figure so to speak, yet they did not choose to create a key figure that also keeps the Final Demand Plan as originally entered.
2.- Would you think that doing the above, without keeping any keyfigure in the planning book that actually shows what the Final Demand Plan was in the Past, is a good practice?
The Demand Planner could still retreive the Final Demand Plan from BI reports, yet, dynamically they could never really see it in the planning book.
3.- Do you think the above dynamic key figure would bias the Demand Planner's behaviour to manipulate the future open Final Demand Plan buckets to enter volumes in order sum to a monthly total, independently of what were the over and underachievements in the past (since they are not really visible to him) ?
I would really like your feedback,
thanks in advance!
JD Loera

Hello Thanks for your feedback.
I agree with your point, and I hope that i still get more feedback from other Business Process Experts.
I am trying to build a case for my client, to challenge the decision of their initial design as this practice is going to hurt the Demand Management process, if what they intend to achieve is a true "unconstrained demand plan"
Much appreciated
JD Loera

Meaning of CONDET key figure in standard 9ASNP94 APO SNP planning book

I am trying to clarify the use and meaning of the CONDET (capacity consumption details) key figure in the SAP standard SNP planning book 9ASNP94.
Any advice appreciated...

Hi Frank,
This indeed is practical requirement wih no simple solution ( at least we did not find).
We created a background job for deletion of the stocks ( which were updated through IDOCs like your situation) at specific periodicity. The jobs were made as per planners with specific variants and when planner would like to delete the stocks, the job will be run.
Another option could to be copy the standard program /SAPAPO/RLCDELETE to a module program and check validation at the input screen, before calling the deletion program.
Regards
Datta

Key Figure Display in Interactive Planning

Hello,
I am unable to display some of the key figures in SNP Interactive Planning. All these Key Figures are present in Planning book and are also included in the data view.
Is there any setting wherein I can control the display of Key figure although that key figure is present in Planning book and data view. For Example I have my "safety stock" key figure in my planning book and data view, but I am unable to see the "safety stock" key figure in SNP interactive planning.
Would really appreciate your help.
Thanks,
Sarath.

Hi Visu,
Your answer is really helpful, thanks for that. But while I am trying to hide some key figures it is not allowing me to do so. It is either hiding all the key figures or unhiding all. Please let me know if why the system is behaving like this.
Thanks

Key figure display in planning book with respect to Time bucket profile

Hi,
I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
How to make the total quantity 85 to show in the current and future weeks only.
thanks and regards
Murugesan

Hi Murugesan,
Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
In this below case, what time characteristic do you have in cube? Is it date, week or month?
If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
If it's months, then you would need to find out how much data would go to the days in the past week of the month.
The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays. The only other exception I can think of is that you have data in teh days mentioned above.
It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
Thanks - Pawan

Key figure flag in the planning layout

Hi,
Can anyone explain the importance of the key figure flag in the planning layout?
Regds
Pavan.

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

Key figure Explaination in SNP planning books 9ASNP94

Dear Experts ,
I am curious to know regarding SNP planning books key figures
when i am exploring sap standard Planning book
9ASNP94
Data view : SNP94(1)
I can able to see many KEY FIGURES Please refer below
I AM NOT SURE how they are used in planning , i mean what is clear definition of those key figures and i see some key figures are grey out and some or open for entry
how to find those detail information
when i go to T code SDP84 - define planning book
i can able to see those descrption and infocubes but not sure how to understand clearly , would be more thankful if some give me a clear explaination of it
Forecast     TXT
Sales Order     TXT
Distribution Demand (Planned)     TXT
Distribution Demand (Confirmed)     TXT
DistrDemand (TLB-Confirmed)     TXT
Dependent Demand     TXT
Total Demand     TXT
Distribution Receipt (Planned)     TXT
Distribution Receipt (Confirmed)     TXT
Distribution Receipt (TLB-Confirmed)     TXT
In Transit     TXT
Production (Planned)     TXT
Production (Confirmed)     TXT
Manufacture of Co-Products     TXT
Total Receipts     TXT
Stock on Hand     TXT
Supply Shortage     TXT
Safety Stock     TXT
Reorder Point     TXT
Target Days´ Supply     D
Target Stock Level     TXT
Days´ Supply     D
ATD Receipts     TXT
ATD Issues     TXT
Many thanks & Regards
Raj

Hi
Please find below the short summary of each key figures.
Forecast TXT :- FCST which has been released from APO DP to APO SNP
Sales Order TXT :- Sales order transferred from ECC to APO via CIF.
Distribution Demand (Planned) TXT :- Dependent demand coming from other location to this location for same product. Network planning
Distribution Demand (Confirmed) TXT :- In case deployment , we confirm the Distribution Demand (Planned) will appear her.
DistrDemand (TLB-Confirmed) TXT :- Mainly used in case of TLB.
Dependent Demand TXT :- Dependent demand coming from parent product in case of BOM
Total Demand TXT :- The sum of all above demands is called as Total Demand.
Distribution Receipt (Planned) TXT :- SNP created Purchase req will appear in this key figure.
Distribution Receipt (Confirmed) TXT :- In case of deployment Distribution Receipt (Planned) will be get confirmed in the Distribution Receipt (Confirmed) key figure.
Distribution Receipt (TLB-Confirmed) TXT :- Mainly used in case of TLB.
In Transit TXT :- In will contain the in transit stock which will transfer for ECC via CIF.
Production (Planned) TXT :- Planned order will get created via SNP in case of domestic mfg.
Production (Confirmed) TXT :- In case of SNP deployment Production (Planned) will be get confirmed in the Production (Confirmed)) key figure.
Total Receipts TXT :- Total of all the receipt elements as been used.
Stock on Hand TXT :- Stock has transferred from ECC or R3 via CIF.
Supply Shortage TXT :- This will be calculated with macro based on total demand and total receipt.
Safety Stock TXT :- Based on SNP master data, safety stock will get calculated during planning run.
Reorder Point TXT :- Based on SNP master data, Reorder Point will get calculated during planning run. . There are different methods of calculating safety stock.
Target Days´ Supply D :- The safety stock defined in number of days appears based on SNP master data in APO.
Target Stock Level TXT :- Get calculated by macro based on Target Days´ Supply D and total demand in future.
ATD Receipts TXT :- Mainly used for Deployment.
ATD Issues TXT :- Mainly used for Deployment
If you require any specific information for any key figure please do let me know.
I hope this will be useful for you.
Thanks
Amol

Planning cube Key figure over flow error

Hi Experts,
I am getting the following Key figure errors in Planning cube while running the Planning sequences.
1.Over flow occurred when calculating KF
KF details : Data type: DEC-Counter or amount filed with comma and sign.
2.ORA-01455: converting column overflows integer data type
Data type : INT4- 4byte integer,Integer number with sign.
The number s are growing in cube and it is giving overflow error .We are compressing the cubes once in a week.we are using these KF's in two cubes.Please help me to resolve the issue.
Regards
Prasad
Edited by: PRASAD on Feb 1, 2009 9:39 AM

Hi Prasad,
Check here.........
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131393536373226
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=460652
Thanks,
Vijay.

How to use a non cumulative key figure in a multi planning area

Hi
I'm new to bps, my problem is
I need to read the last stock quantity and value at plant and material level to do further calculations in a fox formula, so i made a planning area for the cube 0rt_c36 and another for my tc cube where the results should go, then i combine these areas in a multiplanning area.
problems arise when selecting the key figure in the ratios tab of the multi area, the ratios 0CPTOTSTOBU (last stock) and 0CPTOTSTOPV (last stock purchase value) are not available, only the inflow and outflow ratios are 0CPTOTREBU and 0CPTOTREPV.
I know when reporting, the actual value for stock is calculated by bex, namely, there is no data store at database level, so the question is:
How to obtain last stock for using in bps??
thank you for any help
regards
A. Garduñ

Hi Azael,
In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
Hope this helps!
Regards
Sriram

Key Figure Planning in Marketing Planner ?????

Similar Messages

Maybe you are looking for