Key Figure value in Cube showing with extra zeros

Loaded data into the cube. When I display the result
Key figure values are showing with 2 extra zeroes and Quantity value shaowing with 3 extra zeroes.
Original value
Price, Quantity, Sales Rev
2     1     2
3     2     6
When display value from cube
Price, Quantity, Sales Rev
2,00     1,000     2,00
3,00     2,000     6,00
Why zero is showing? How can I display the original value? In PSA, values are showing correctly.
Thanks,

Hi,
These are the zeroes after the decimal places. this is the property of the key figure.
In your report you can change the display value. In the display properties of the Key figure under the number of decimal places make it as 0. This will remove the zeroes.
Hope it helps.
Regards,
Gaurav
Edited by: Gaurav Kothari on Oct 16, 2008 10:35 AM

Similar Messages

  • Key Figure values in the Bex Report are different from the cube

    Hi all,
    When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
    When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
    Could some one help me find a solution to this issue.
    I look forward to hearing from the experts.
    Regards,
    S.P

    Hi Arun and  Zegion,
    Thank you for your responses.
    Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
    the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
    Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
    Regards,
    S.P

  • Why do we see only values of key figures of a cube in SE11?

    Hi all,
    When we view the contents of a cube in SE11 why can’t we view the characteristics also? Why are only the values of key figures visible to us? Is there any way wherein we can also view the whole contents of the cube i.e. both the characteristics and the key figures?
    Please explain.
    Thank you.
    TR.

    SE11 gives you the Table View.
    A Infocube is a complex strructure where data is stored in mutiple Tables...
    KEy Figure Values in Central Fact Table...Characteristic SIDs in the DIM Table and these SIDs linked to the Master data table values.
    So, to be able to read the values , you would need to know how data is organised in an Infocube
    Regards.

  • Need help for report Variable to restrict the key figure value...

    Hai gurus,
    Now i have data in the cube as follows...
    Reuisition     HR INTW date     LM INTW DATE     TEL INTW DATE     HR Count     LM Count     TEL Count
    a1              01.01.2010     02.01.2010             01.04.2010                 1                1                 1
    a2              02.02.2010     03.02.2010             02.02.2010                 1                1               1
    a3              03.03.2010     04.03.2010             03.03.2010                 1                1               1
    when i execute the report it shd ask the prompts with Date interval as in the below...
    HR INTW date
    LM INTW DATE
    TEL INTW DATE
    if i dont give any interval in the variable prompt it should display all the recors as follows
    Reuisition     HR Count     LM Count     TEL Count
    a1               1                  1               1
    a2               1                  1                     1
    a3               1                   1             1
    If i give LM INTW DATE interval as    01.01.2010 to 31.02.2010
    then it should display all the other counts as in the output_1 , but for LM count for a3 it should show 0.
    Reuisition     HR Count     LM Count     TEL Count
    a1               1                  1               1
    a2               1                  1                     1
    a3               1                 0                  1
    that means wherever i restrict the data depending on the variable that only that interval key figure value shd be in the report..
    for this scenario, which variable i need to use... and how i need to restict the KFig value in the report...
    Right now i am getting like this but it is restricting the records,,, where it should not restrict the records...in the report..
    Please guide me for the same...
    If any concerns about the scenario please let me know...
    Regards,
    VJ

    hi chowdary ,
    could you tell me the var. creation in detail and  with which reference object i need to create ...
    whether i need to take LM_DATE / 0DATE while creating variable...
    and i kept this variables it in filter section, based on the LM_DATE Object.
    i have tried both.. y'day when i take 0DATE it giving me some results...
    But at the same time it is restricting the records..
    i think it could be a problem with var.. properties?
    need more inputs pls.
    Regards,
    VJ

  • Error in key figure value at Reporting level

    Hi Experts,
    I had problem of Key figure value which displays wrong data in reporting.
    The Process is :
    I had added the key figure SALK3 to the generic data source (xxx). The Extractor is Table/View, Table is MBEW.I had replicated to BW side.
    In BW, The process is Data Source(Generic) to 0MAT_PLANT(Infoobject (Added SALK3 to the infoobject of Attributes tab) ) loads to Multiprovider.I can see data  in the multi provider for that particular field after loading.
    Now the problem is, In Query designer i had added the key figure in Columns and ran the report.The output of the field is, If the value is 100 it displays 100 ERROR, if it 200 it displays 200 ERROR.Could you please help me on this,where i went wrong.
    Regards,
    Kishan.

    Hello,
    Please check with the follwing screen shots:
    Right click on the key fgure you created----select edit
    Once the screen opens select the NODIM from Data Functions before the key figure (as highlighted).
    Finally click on OK.
    Regards
    NS

  • Key figure value in a level

    Hi is it possible to identify which key figures values has introduce a user ? and which CVC has the user uses for inserting the key figure value?
    REgards.
    PS :We have APO DP 5.0

    Javier,
    It is possible to identify and track the inputs of specific users contribution to that Key figure using the following method, Provided you follow certain prerequisites first.
    Its should be known before the certain people are responsible for certain data selections, like if there is a change in certain Sales org, we should ideally know who is the assinged planner to that Sales Org. or that sales org has been assinged to which Planner
    Next, Develop to Lag reports in BI using the regular snapshots of the the data extracted out of DP before and after the changes have been made for that particular KF.
    Compare the changes using the versions of snapshot before changes and after changes, or perhaps create another calucalted KF showing the different between two versions. The BI team should be able to create reports that enable you to run this report on all levels for that Key figure.
    Hari V

  • To delete and insert a new key figure in the cube

    Hi Experts...
                 How can I delete a key figure and insert a new key figure into a cube with data...? Should I be creating a new cube with the new key figure ?
    Thank you..
                Manohar....

    Hi
    Are you using Bi2004s
    yes you can delete,add,replace a key figure
    have a look at this blog for step by step procedure
    /people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
    hope this helps

  • 250 Key figures in one cube?

    Hello,
    we need to report on 250 key figures at the same time. I now there is a limitation in the cube of 233 KF, any ideas to solve this problem? What about using an ODS for the reporting, are there any performance issues or do you have experiences with this amount of KF in one infoprovider?
    Many thx
    René

    I think you should reaccess your data model and see if the no of key figures can be reduced. 233 is the max allowed by SAP. You can partyly solve this problem by creating 2 cubes with the same characteristics and splitting the key figures. This solution will work only when you have mutually exclusive key figures requirement in the report.
    Also you can use the Restricted key figures and calculated key figures in the reports thereby reducin the actual key figures in the cube to be within the limit.
    Hope this helps.
    Amit

  • Model multiple key figures of BI cube to BPC

    Hi Experts,Probably a good way of having multiple Key figure values from BI to BPC is to convert it into a account based model (create a dimension and have the key figures as dimension members).I have this scenraio where we are using COPA (costing based) for BPC mgmt consol.This costing based COPA cube in BI has around 120 Key figures.Pls advice on the best way to medel this scnerio in BPC where i would probably need most of those Kf's.I am also looking at how i could reduce separate transformation files/mappings from BI to BPC also on the same..
    Many thanks
    savvvy

    Hi ,
    Thank you Pravin and Ajay for your valuable suggestions and time.what i would like to clarify is on the transformations.Let us say i have my BI cube as costing based itself and this i need to map to BPC dimension.
    BI structure- char1 ,char 2,char 3 ,KF1(value field 1),KF2(value field 2),KF3(valuefield3),KF4....
    In BPC ,lets say we have  a separate dimension (i guess this should be of account type or probably user defined one)  which would have dimension members as KF1,KF2,KF3,KF4....
    Now how would i do the mapping/transformations from BI to BPC? would i need to have 4different transformation files (assuming i have 4 KF's in my BI cube) for each KF & char combination and thus to load data also many times.
    How to achieve modelling side of this situation.any suggestions on this would be greatly appreciated.
    many thanks
    savvvy

  • BEx query: count unique key figure values

    Hi
    I need a little help with a query. I need to count the number of unique key figure values. Se example;
    Data:
    Employee1 - 2
    Employee2 - 3
    Employee3 - 2
    Employee4 - 1
    Employee5 - 2
    Employee6 - 1
    Employee7 - 2
    Wanted output:
    1 - 2
    2 - 4
    3 - 1
    What kind of options do I have?
    Thanks
    Mike

    I would create a new characterstic for the same key figure and placed in rows and count in columns.
    and second approach would be , create condition with customer exit and write the logic to count the unique values.
    This is just a direction to move forward with the assumption that you are good in using variables and wirting logic in ABAP.
    Thanks,
    Sukhi

  • Code to sum up multiple record key figure values from one ODS to another OD

    We've got two ODSs: ODS1 and ODS2 and ODS1 feeds data to ODS2 through update rule.  In ODS1, multiple records could contain one same doc records and we would like to sum up a key figure value for these multip records with the same doc number in the update rule and populate a key figure (a sum-up value or total value) in ODS2 for this doc number.  We wonder how the code would look like.
    Welcome the valuable input!
    Thanks

    Hello Kevin,
    In this case there is no need of a code. As in ODS2, contract number is a key and PO is not a part of key, you can have update type for the key figure as "Addition". Value for that particular key figure will be added for all the recordes with same contract number irrespective of PO number.
    Hope it helps.
    Regards,
    Praveen

  • How to create a variable for key figure (value will be entered by the user

    I want to create one query, where the user has to entered a max value when the query is started, so that only the query rows will be listed, where the key figure value (integer) of the row is smaller than the max value given.
    How can i define that variable which has to start at the begin of the query; and also the restricted key figure iin consideration of the KF variable.
    Thanks for helping
    Ar.

    Hi Arnaud,
                Go to Conditions-> Right click -> New Condition -> Edit -> NEw -> Selct the KEy figures from the dropdown( the KFs that are used in the rows/columns) -> Select Less than from the operator drop down (less than is for you case) -> Values, there is an option to create a variable -> Select the variable -> transfer. It will appear on the top.
    Save & Execute, you will find it in your selction criteria.
    Regards
    Sunil

  • Key frame values are not showing

    Does anyone know why my key frame values are not showing? How do I get them back?

    See this about showing and hiding columns:
    After Effects Help | General user interface items

  • Changing key figure values in DSO/Cube

    Experts,
    I have a DSO and a Cube and the data has been already loaded in to a amount Key Figure. By default it is 2 decimal places. I want to change the decimals to 7. I cannot delete data from the cube or the DSO.
    Can you please suggest some ideas to do this.
    I came accross this note 579342 which talks about realigning this but as I have not implemented this before, I wanted to get your thoughts on if this is safe to do.
    Thanks
    Yashu raj

    Hi Yashu,
    I did this with using system message board and I put message on EP tooo.
    So you do a small R&D. Run this report and let me know too if amount data is reflecting in the cube or not.
    Logically it should not but have a try?
    Regards,
    Mahesh

  • Showing U$S / Hora in key figures values

    Hi guys,
    I have a little question: It is possible to show as unit of measure in each value of a a key figure a description?, I mean:
    Generally We use:
    KF
    100 MTS
    100 HS
    100 USD
    What I want:
    KF
    100 U$S / Hora
    100 U$S Movilización
    Thks!
    EV

    Emiliano,
    the UOM details are in table t006 - if required - you can change the descriptions for the same and see if it reflects the same....
    Add the 0unit IOBJ into the report and show the text for the same....
    Arun
    Hope it helps...
    Message was edited by:
            Arun Varadarajan

Maybe you are looking for