Key Figure values in the Bex Report are different from the cube

Hi all,
When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
Could some one help me find a solution to this issue.
I look forward to hearing from the experts.
Regards,
S.P

Hi Arun and  Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

Similar Messages

  • PS CS4 64-bit (in Web Premium CS4) on Win 7 PC.  I did a duplicate file check on my hdd and deleted dup files. Now I get "Some of the application components are missing from the Application directory, Please reinstall.."

    PS CS4 64-bit (in Web Premium CS4) on Win 7 PC.  I did a duplicate file check on my hdd and deleted dup files. Now when I try to run PS 64-bit I get "Some of the application components are missing from the Application directory, Please reinstall the application." When I do this, it seems to install correctly until the very end, then it says "Installation Complete With Errors", and when I try to run I get the same 'component missing message'. What can I do? PS 32 bit runs fine. Some of the other applications ib Web Premium say the shortcut has been changed or removed. I appreciate your help...Thank you

    Best advice I can think of is to uninstall and run the Clean Script from here.
    Adobe - Adobe CS4 Clean Script

  • How to download the custom Reports to xls from the system?

    Hi
    How to download the custom Reports to xls from the system?
    I know the t code SE38 for reports.
    Vijay

    Hi
    Here the programa name is nothing but a report name???
    Vijay

  • 'Some of the application components are missing from the Application directory. Please reinstall the application.'

    I tried opening PS and this message popped up 'Some of the application components are missing from the Application directory. Please reinstall the application.' I cannot find the Reinstall button?

    I followed these instructions but cannot find how to reinstall PS. When I click on the membership link the page displays as NOT BEING FOUND.
    Quit all applications. 
    In the Finder, navigate to the Photoshop application folder. 
    Do one of the following: 
    If the Locales folder is not listed within the application folder, then skip to Step 5.
    If the Locales folder is listed within the application folder, then drag the Locales folder to the Trash.
    Choose Finder > Empty Trash. 
    Start the installer for Photoshop or your edition of the Adobe Creative Suite. 
    If you purchased boxed software, then insert the installation DVD-ROM into your computer's DVD drive.
    If you purchased downloadable software from the Adobe Online Store, then double-click the disk image (.dmg) file or files that you downloaded. (If you no longer have the downloaded disk image file or files, then log in to your account at www.adobe.com/membership to download the installer.)

  • Some of the application components are missing from the Application directory, Please reinstall the

    Some of the application components are missing from the Application directory, Please reinstall the application. This is what i am getting tying to open Photoshop Cs6???

    Renée in the future when removing Photoshop CC please utilize the uninstaller located in the Applications/Utilities/Adobe Installers folder.  Please run the uninstaller and then reinstall.  If you continue to face difficulty reinstalling Photoshop CC then please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

  • Just updated my iMac to OS X Yosemite and my Photoshop will no longer open. Pop up message informing Some of the application components are missing from the Application directory. Please reinstall the application. I have the pay monthly package and don't

    Just updated my iMac to OS X Yosemite and my Photoshop will no longer open. Pop up message informing, Some of the application components are missing from the Application directory, Please reinstall the application. I have the pay monthly package and don't know where to start.

    Do as it says: Reinstall the program. Run the cleaner tool and let CC app do the magic.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • CS5 Photoshop I get the message: Some of the application components are missing from the Application directory, Please reinstall the application.

    When trying to open Photoshop CS5 I get the following Message: Some of the application components are missing from the Application directory, Please reinstall the application.
    Can I get these components downloaded as my optical drive is broken.

    Download CS5 products

  • Error "Some of the application components are missing from the Application directory, Please reinsta

    I downloaded Photoshop Extended about a week ago... the second time I opened it, an error message came up saying "Some of the application components are missing from the Application directory, Please reinstall the application."  So I uninstalled it, then re-intalled it.  I was able to open it successfully after that - and I used it once.  I have just gone to open it again and it is reading the same error.  This is very frustrating - why is it doing this?  I don't want to have to unintall and reinstall everytime I want to use it.  Please help

    I want to bump this topic, again. So far the clues I've found are that there may be problems when the program was installed in one user account, and used in a different one. Perhaps there is a language setting, too. Can anyone give tips on this error for Mac, specifically Lion OS?

  • Error message, "Some of the application components are missing from the Application directory."

    I received the following error message: "Some of the application components are missing from the Application directory. Please reinstall the application. So, I uninstalled (Photoshop CS5), reinstalled and got the message again! Please help! I have no idea what I'm doing wrong.

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • I had photoshop installed fine.  We had to replace our hard drive, but had a full backup and everything else is working except for elements.  This is the message I get -Some of the application components are missing from the Application directory, Please

    I had photoshop installed fine.  We had to replace our hard drive, but had a full backup and everything else is working except for elements.  This is the message I get -Some of the application components are missing from the Application directory, Please reinstall the application.  I have reinstalled, but am getting the same message.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can also try to repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • While executing the query the output is completey different from the query

    Dear friends,
    We built a query and loaded the data for that infoprovider.
    While executing the query the output is completey different from the query what we have built.
    Output has no relevance to the query.
    Kindly help the same.
    Regards,
    Sathya

    HI Satya,
    In my opinion the issue is with your front end.
    Results should be identical in RSRT, BEx Analyzer (Workbooks) and the ABAP-Web since all three frontend tools use the "ABAP Runtime layer".
    It may differ In the Portal where the new "Java Runtime layer". (Java-Web.) is used.
    This is given in OSS Note 1296576 - Different Query Behaviour: ABAP - Java.
    So i think the problem lies in your analyser. If you are using Analyzer: BI Add on 7.X (Based on 7.10) try and get support package 8.
    Hope this helps.
    Thanks,
    Rahul

  • In the info bar at the bottom of the iphoto window, why is the number of items different from the total

    In the info bar at the bottom of the iphoto screen, why is the number of items different from the total?

    What version of iPhoto and system are you running? What mode are you in, i.e. Events, Photos?
    If it's the Photos mode the number at the bottom will represent the number of photos displayed in that mode or the number of photos selected in that mode. The number will match the number next to the photos mode only when there are no photos in that mode that are selected. 
    If you click on the Events icon and then back on the photos icon the numbers should match.
    OT

  • Web templete showing "EA" in the Key figure but not in Bex Report

    Hi,
    When I exucute my query in BEx , the report works fine , but while exucuting in Web , "EA" is getting added after every Key figure Value..
    Can you pls help us with any input ?

    Ajay,
    I think you did't understood the problem correctly .
    My Bex report don't have any Quantity Key figure So in bex report no Unit( If I think EA is Unit )  is coming . Same should come while executing in Web . But the Problem is in Web some EA symbol is coming .
    N.B : Our system just undergone SP upgrade .

  • Result shown in Bex Report is different from Infocube

    In BI, Flat file loading, I got data correctly into the cube. But when I tried to generate the report its showing all the key figure values divided by 10. Keyfigures are of type Amount. And when I checked for scaling factors, its showing nothing 1 only (ie nothing).
    I am working in BI 7.0 and the reporting tool Business explorer is 3.x version. is this can be a problem?
    Can some one help me to solve out this problem?

    As my currency is OMR, I required three decimal points. So in SPRO it should be maintained as 3.
    I checked the scaling factor. Nothing is maintained.
    Eventhough I mentioned while creating key figures that decimal places 3, in the infocube its coming only two decimal points.
    So if the value is 335.824, I am getting 335.82 in the InfoCube and 33.58 in the report.
    I created the keyfigure with fixed currency OMR. But in the flat file the currency filed is not there. So while writing the transformation I gave the currency as NO Conversion.
    Where I went wrong, please advise me?

  • AUSST setup. How can I easily verify that the computers (macs) are updating from the AUSST server?

    I have set up everything according the recipe. Watched Karl Gibson video about this probably five times.
    Server is working
    Users have AdobeUpdate.Overwrites file in place
    Everyone is getting updates (could not do that before by themselves).
    How can I easily see that updates are downloaded from the AUSST server instead of directly from Adobe online?

    I found this out on my own.
    The answer is found (on a mac) in the /Applications/Utilities/Console
    Look in the sidebar for Adobe Download
    DML.log
    Hope this helps someone.
    06/22/14 21:32:13:409 | [INFO] |  |  |  |  |  |  | 2867720 | The file to be downloaded is http://<Your UpdateServer>.local:80/Adobe/updates/oobe/aam20/mac/AdobeExtensionManagerCC-7.0/7.2/setup .dmg

Maybe you are looking for

  • Send as email doen't work in my Acrobat 9 Pro

    I use the desktop version of Windows Live Mail but my Acrobat 9 Pro is not able to connect with it to be able to send as email an open pdf. Can anyone help? Many thanks in advanced. Francisco De La Chesnaye [email protected]

  • Double Speed (2X) on Nano 6G Slow

    I have noticed that the double speed mode for podcast playback is only about 10% faster than normal speed. My iphone plays back podcasts at much faster rate. Something is wrong with the Nano's double speed mode. I've read other's complain about this

  • Add few lines in jserv.properties file automatically

    Hi All, Generally we will be doing 11.5.10.2 "refresh" automatically..... How can i automate the script to add this 3 lines in jserv,properties? Basically add the following lines to the jserv.properties before any other classpath entry wrapper.classp

  • Hang at boot with rEFInd

    After last kernel update (using all testing repos) I rebooted my notebook and -> CRACK... rEFInd let me choose between windows 8 and Arch as usual but if I choose Arch it will display only kernel boot line and then it hangs... why that happens? my co

  • Parsing a string in java

    In my program, I have to read in a string, and parse it into different words. For example, if I read in the line, "this is a sentence", I need to be able to split this string into "this" "is" "a" "senence" (four new strings). How can I do this?