Key figures are not available when i performing LBWE action

Hi gurus,
  I am trying to load 2lis_02_hdr, 2lis_02_itm and 2lis_02_scl to infocube 0pur_c04.
But whatever the key figures available in the cube its not appear in the R/3 side data Source.. but those keyfigures are available in LIS structure.. for that how can i bring those key figures to dataSource for using LO Cockpit..
I heard we need to perform some prerequistes in SBIW.. let me know in breif with step by step..
Full points will assign to all those reply my query early..
Please let me know if not understand my query..
Thanks in Advance

Hello Sudheer
2LIS_02_HDR, ITM and SCL do not take data from S011 but directly from transactionnal tables like EBEP, EBKO, EBPO (names quoted from memory).
So you have to look for the key figures from those tables and not the one in S011.
Historically, the three datasource were built to replace 2LIS_02_S011 but the calculations to rebuild the keyfigures were delivered in BW in an old BCT that made the conversions. The logic and modeling have changed completely.
If you really need to transfer S011 to BW without remodelling the data, you may want to use a generic extractor based on S011 (provided you have a delta key available).
Otherwise, in SBIW, Options for datasource specific to the application, Logistics, purchasing, you have two customizing transactions. you have to define branch and process key to load data into BW. But that will not have any effect to LBWE.
Hope this helps.
Regards
Fabrice

Similar Messages

  • Some key figure are not update for movement type 101

    Dear All,
    I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
    I have loaded the data according to stranded procedure in "How to Load...."
    I have checked the values of material in R3 and it is there.
    Example of the record::
    Material    Plant Movement type  Calender Day    quanity Base Unit
    10101      01       350                     01.02.2006     20             KG
    10101        01       101                     05.07.2006                      KG
    10101         01      101                      10.07.2006                      KG
    The Quantity is not appearing in second and third record.

    Hi,
    Please check whether you have set  ''Rule groups''  at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
    Please check whether you have set this option at transfermation level.
    For example, may be in your case materials from different plants are updating to different key figure.
    Thanks,
    Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

  • Some key figures are not being correctly reversed in the Change Log

    Hi Experts,
    I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
    Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
    First time the record comes - Change log content:
    Material   Valid Dt   Cost Value      Quantity Rec. Mode      Req. ID
    1234     May/01   $  100.00       10          'N'     1
    Second time when the record changes the Date:
    Material     Date      Cost Value      Quantity Rec. Mode      Req. 1234     May/29   $  100.00       10          '  '     2
    1234     May/01   $  -100.00       10          'X'     2
    Then the final result in the cube, after it is compressed, is:
    Material     Date      Cost Value      Quantity
    1234     May/29   $  100.00       20      
    Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
    Can anybody help me to figure this out, please?
    Thanks in advance.

    Hi Rajkumar,
    Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
    The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
    Any other ideas?
    Thanks.

  • Why key figures are not displaying

    Dear Experts,
    I am faced with a problem not encountered before. My report has multiple key figures all of which are not displayed when I run the query. However if I change the view to Tabular format (from query properties) the key figures become visible.
    Request your help in resolving the issue.

    Hi,
    are you hidden the some key figures? please check.
    select the KF -> go to properties -> check the display tab - hide/show/hide can be shown.
    if not close and open one more time in query designer.
    Thanks,
    Phani.

  • In Query key figure are not populated

    Hi Gurus,
    i am using a RSCRMBAPI to get the out put of my query into a Ztable but when i run my program the Ztable is getting data but no key figures are getting populated.
    plz help
    thanks
    neelu

    Hi gurus,
    i just have 1.6lac records with six keyfigures so i think its not the problem of limitation...
    then can somebody help me how to get rid of this, no key figure values are getting populated
    thanks and regards
    Neel

  • Virtual Key Figures its not populated when execute query

    Hi All
    I did a BADI for populate a Virtual Key Figure, I follow the instructions of link
    Link:[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c?quicklink=index&overridelayout=true]
    In addition I add the code section of data declarated on example of: CL_EXM_IM_RSR_OLAP_BADI section define: IF_EX_RSR_OLAP_BADI~DEFINE, only information that said:
      DATA: l_s_chanm   TYPE rrke_s_chanm,
            l_kyfnm     TYPE rsd_kyfnm.
      FIELD-SYMBOLS:
            <l_s_chanm> TYPE rrke_s_chanm.
    I test the query on RSRT and the virtual Key Figure is "0.00" this look like if the virtual key figure is not populated.
    I did other things like:
    Set a Break Point on COMPUTE section of my BADI, I saw that the value is assigned, but I don't know how I can continue reviewing the pass of this value to result of query.
    I generate again the query on RSRT.
    My code is:
    IF_EX_RSR_OLAP_BADI~DEFINE
    method IF_EX_RSR_OLAP_BADI~DEFINE.
      data: L_S_CHANM   type RRKE_S_CHANM,
            L_KYFNM     type RSD_KYFNM.
      field-symbols:
            <L_S_CHANM> type RRKE_S_CHANM.
      case I_S_RKB1D-INFOCUBE.
        when 'ZGTO_OB2'.
          append 'ZVIRTKF' to C_T_KYFNM.
      endcase.
    endmethod. 
    IF_EX_RSR_OLAP_BADI~COMPUTE
    method IF_EX_RSR_OLAP_BADI~COMPUTE.
      field-symbols <FS_ZVIRTKF> type any.
      P_KYF_ZVIRTKF = 16.
      assign component P_KYF_ZVIRTKF of structure C_S_DATA
      to <FS_ZVIRTKF>.
      <FS_ZVIRTKF> = 10 .
    endmethod.
    I will appreciate your recommendations, Thanks in advanced.
    Al

    Thank you very much Sanganya
    I saw this:
    I put a break point on P_KYF_ZVIRTKF = 16., then I saw that P_KYF_ZVIRTKF obtain value 16.
    Then on sentence: assign component P_KYF_ZVIRTKF of structure C_S_DATA
    to <FS_ZVIRTKF> , when the system pass this line, I review the sy-subrc and is equal 4, as I understood the ASSIGN sentence did not be complete, the value shoul be 0.
    Then when the system try to run the sentence: <FS_ZVIRTKF> = 10  the system send an Execution error that say:  GETWA_NOT_ASSIGNED...
      Error analysis
        You attempted to access an unassigned field symbol
        (data segment 32780).
        This error may occur if
        - You address a typed field symbol before it has been set with
          ASSIGN
        - You address a field symbol that pointed to the line of an
          internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    Exactly the line selected with error is:
    >>>>    <fs_zvirtkf> = '10.0'.
    I will appreciate your help
    Thank you
    Al

  • Calculate key figures are not important to reports

    Hello Experts,
    How can I delete a calculated key figure from the query when the change of report query is not accessible from the analyzer?
    Thank you

    If you can create a new workbook you can. Simpy right-click on "Key figures" in the BEx Analyzer, remove the specific C-KF from the displayed list of keyfigures and the save the Workbook. You should check if you have the authorization rights to save this new Workbook into existing roles, or just your Favourites.
    Altering the Query is a bit more work though.

  • Virtual Key Figures-  RSRT says Key Figures are not valid

    Hi,
    Getting the following mssg when I try to generate a query in RSRT for the first time after I have coded Virtual Key Figures.
    For the characteristic that I am pulling the user entered data from:
    /BIC/ZNEWEST is not a valid characteristic for InfoProvider 0QM_C08
    Message no. BRAIN122
    Diagnosis
    "Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZNEWEST as the characteristic to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08.
    System response
    /BIC/ZNEWEST is ignored.
    Procedure
    Check the exit."
    From the key figure I am using this info to populate value:
    "/BIC/ZKF3 is not a valid key figures for InfoProvider 0QM_C08
    Message no. BRAIN121
    Diagnosis
    Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZKF3 as the key figure to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08 or /BIC/ZKF3 references the key figure . In this case, the basic key figure l  is enough to calculate in the exit.
    System response
    /BIC/ZKF3 is ignored.
    Procedure
    Check the exit."
    Any help would be appreciated.
    This is my first time using Virtual KF's.
    Thanks,
    Brandon

    Hi Ajay,
    Here is my code:
          FORM user_0QM_C08                                            *
    -->  L_S_RKB1D                                                      *
    -->  C_S_DATA                                                       *
    FORM user_0QM_C08 USING l_s_rkb1d   TYPE rsr_s_rkb1d
                         CHANGING c_s_data TYPE any.
    *-- Local data
      DATA: l_n TYPE n,
            FIN1 like /bic/azqm_O5000-/BIC/ZPFINNT,
           FIN2 like /bic/azqm_O5000-/BIC/ZPFINNT,
           STAR1 like /bic/azqm_O5000-/BIC/ZPFINNT,
            STAR2 like /bic/azqm_O5000-/BIC/ZPFINNT,
            TASK type STRING.
    *-- Field Symbols
      FIELD-SYMBOLS <ZNEWEST>.
      FIELD-SYMBOLS <ZOLDEST>.
      FIELD-SYMBOLS <ZPSTARNT>.
      FIELD-SYMBOLS <ZPFINNT>.
      FIELD-SYMBOLS <ZKF3>.
      FIELD-SYMBOLS <ZKF4>.
      FIELD-SYMBOLS <0NOTIFICATN>.
    *->>> Initial checks
      SELECT SINGLE * FROM  zvir_reports
             WHERE  infocube  = l_s_rkb1d-infocube
             AND    compid    = l_s_rkb1d-compid.
      CHECK sy-subrc IS INITIAL.
    *->>> Prepare the structure
      ASSIGN COMPONENT g_pos_0QM_C08_ZNEWEST
        OF STRUCTURE c_s_data TO <ZNEWEST>.
      ASSIGN COMPONENT g_pos_0QM_C08_ZOLDEST
        OF STRUCTURE c_s_data TO <ZOLDEST>.
      ASSIGN COMPONENT g_pos_0QM_C08_ZPSTARNT
        OF STRUCTURE c_s_data TO <ZPSTARNT>.
      ASSIGN COMPONENT g_pos_0QM_C08_ZPFINNT
        OF STRUCTURE c_s_data TO <ZPFINNT>.
      ASSIGN COMPONENT g_pos_0QM_C08_0NOTIFICATN
        OF STRUCTURE c_s_data TO <0NOTIFICATN>.
    *~~~>Changeable
      ASSIGN COMPONENT g_pos_0QM_C08_zKF3
        OF STRUCTURE c_s_data TO <ZKF3>.
      ASSIGN COMPONENT g_pos_0QM_C08_zKF4
        OF STRUCTURE c_s_data TO <ZKF4>.
    *do not go thru code if user fields are blank.
      IF <znewest> IS INITIAL OR <zoldest> IS INITIAL.
      Exit.
      Endif.
    *-->>> Read general data
      CLEAR: /BIC/AZQM_O5000, FIN1, FIN2, STAR1, STAR2, TASK.
      TASK = 'SCM'.
    get Start1 time
      SELECT /BIC/ZPSTARNT   FROM  /bic/azqm_O5000 INTO STAR1
             WHERE  notificatn        EQ <0NOTIFICATN>
             AND    /bic/ZNEWEST      EQ <ZNEWEST>.
      ENDSELECT.
    Get Finish1 time
      SELECT /BIC/ZPFINNT   FROM  /bic/azqm_O5000 INTO FIN1
             WHERE  notificatn        EQ <0NOTIFICATN>
             AND    /bic/ZNEWEST      EQ TASK.
      ENDSELECT.
    Get Finish2 time & Start2 time
      SELECT /BIC/ZPFINNT /BIC/ZPSTARNT FROM  /bic/azqm_O5000 INTO (FIN2 ,
    STAR2)
             WHERE  notificatn        EQ <0NOTIFICATN>
             AND    /bic/ZOLDEST      EQ <ZOLDEST>.
      ENDSELECT.
    *- Update key figures
      <zKF3>  = abs( FIN1 - STAR2 ).
      <zKF4>  = abs( STAR1 - FIN2 ).
    ENDFORM.                    "user_0QM_C08
    Thx

  • Why am I told that fonts are not available when the file was originally created in Fireworks?

    I get the "Fonts not available" message when I open up a document, i.e. open up a png document in the program/computer/etc. where the program was created in the first place.
    I don't get this. How can the fonts not be available when I'm using the same program that used these fonts originally? Having said that, the appearance doesn't seem to change.

    Are the fonts in question installed on your computer?
    Fonts are not part of a program, fonts are installed on a system. Once installed, a font is available to any program that uses fonts. If you're opening a document that was made in the same program, but on a different system, using fonts you do not have installed, then you will get that message.
    So... Are you opening a document that you created? Are you opening the document on the same system on which the document was created? Have you made any changes to the installed fonts (installed or uninstalled any fonts)?
    What version of Fireworks are you using and what OS are you running it on?

  • Hidden Key figures are not being displayed after unhiding

    We've applied SP 14 - SP 22 in our 3.1C BW system. Prior to the patches going in, users were able to unhide hidden key figures through the Change Query local view and view them in the report once the query was executed. After the patches were applied, even though the key figures
    were unhiden through the change query local view, they are not returned in the report after executing the
    query.
    As anyone run across this after appling this patch level ?

    Hi Rajkumar,
    Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
    The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
    Any other ideas?
    Thanks.

  • Key figures are not appearing in the reports ?

    Hi Guys,
    After integration process BW with Crystal 2008. I have tried to build a report on Bex query on top the Infocube. I could not fine key figures. Can you guys help me out ?

    Hi,
    can you run the BEx query in transaction RSRT without any issues and keyfigures are shown ?
    Ingo

  • BI COntent:     Key figure ***  is not available in version D

    Hello,
    I  am trying to activate 0PUR_C02 in BI content by Before and After Installation ,i got errors-infoobject is not available in Version 'D' 'or Version 'A', I checked  in RSD1 InfoObject is in Active version , and i unistalled by selecting "Do Not Install any Below"  still am facing same error...
    wat is the sol for it....

    Hi Vinay,
       The BI content objects are delivered in version D. They have to installed(Activated) before they can be used.
        In your case the BI content object "0ADDATEFROM" seems not be in inactive state. So search for this BI content object and then activate(install) it. Later you can use it in 0BP_ID .
    Reward points if you find it helpful.
    Regards,
    Harold.

  • Themes are not available when emailing

    Themes do not appear when I try to email a message

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance.

  • Loading new class files when they are not available when the JVM starts

    Simple Question
    Is it possible to load class if it was not compiled when the original JVM was launched?
    More Detailed Question
    Our build system is getting a slight tweak with a new test runner. After our build system compiles the file, I would like to be able to load the files that have just been compiled.
    Our build system runs inside its own JVM and calls ant scripts to run the different processes(Separate JVM). The new test runner will also be called from the build system(Same JVM) but not as an ant target. Is it possible to call the newly compiled files from inside the build system JVM if they had not been created on the start of that JVM using reflection?
    Thanks in Advanced!

    public class t
        public static void main(String args[])
         throws Exception
         Writer out = new FileWriter("Foo.java");
         out.write("public class Foo implements Runnable {\n");
         out.write("    public void run() {\n");
         out.write("        System.out.println(\"run like the wind\");\n");
         out.write("    }\n");
         out.write("}\n");
         out.close();
         Runtime.getRuntime().exec("javac Foo.java").waitFor();
         ((Runnable) Class.forName("Foo").newInstance()).run();
    }

  • Contacts are not available when sharing a photo stream

    I've updated my iPhone to iOS 6 and have noticed when I'm trying to share a photo stream, the bulk of my contacts are greyed out and not selectable. More notably, a lot of my contacts that have iOS 6 are greyed out. What's the criteria for it being eligible to share a photo stream?

    No.  I just tried and was able to address to non-iCloud users.  Not sure why yours is grayed out.  Try addressing it by just typing in the email address rather than tapping the plus sign to go into contacts.

Maybe you are looking for