Key figures between Characteristics in Report

Hello All,
I have report like below.
Old Material - New Material - Old Desc - New Desc - Old Qty - New Qty.
ABC - BCD - AABC - BBCD - 10 - 20
But the client require format like below.
Old Material - Old Qty - New Material - New Qty - Old Desc - New Desc
ABC - 10 - BCD - 20 - AABC - BBCD
I am working in BI 7.0 environment.
Have any one faced this type of issue. If so please help to resolve it.
Regards
Sankar P

Hi,
Try to create Formula Variables with Replcament path on Old Material & New Material and then use it in Columns.
For Formula Variables with replacement path see ..
Calculating the Ageing of the Materials
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Thanks
Reddy

Similar Messages

Add new key figure with characteristics in report painter

Hi expert,
I am create a new report painter in GRR2 under report group 8A2 (EC-PCA: Standard Reports) and i would like to create a report show on G/L amount with segment.
When i click on first column to assign "key figure with characteristics" i am not able to find characteristics "segment".
Please kindly advice how to create in new characteristics in report painter?
Thanks.
p/s : profit center number is same with segment number
regards,
ng chong chuan

Hi,
"segment" is not a characteristic of classical profit-center accounting (libraries 8A*). Its a New GL characteristic, thus create a report painter report for New GL library.
best regards, Christian

What is diffrernce between key figures and characteristics?

Hi all,
I am a newbie to SAP BI....i am doing Masters in ERP(SAP)....I have confusion about what is basic difference between key figures and characteristics?
Why do we have to define attributes in characteristics?
If any one can refer me a thread that answers my questions or explain with very lucid example I will highly appreciate it.....please answer this question as I have just spend 4-5 months studying BI and have not really implemented in the Industry but we do have access to SAP BI where we perform tutorials....
Also please let me know the links to materials where basics of BI are explained in a very simple way.....
Thanks,
Regards,
Rahul

KF is anything which can quantitatively measured: Amount, Number, Value, Price... whatever you want to measure is called Key Figure. This key figures are also called KPI (Key Performance Indicator). If you want to know the number of sales orders, the number of deliveries, the amount of deliveries... all are key figures
And to add to that, key figures are also divided into two:
Cumulative KF: Like I said, amount, value, price
Non-cumulative KF, this is different kind of key figures which shouldn't be summed up, for example: Age, Inventory, Number of Employees. When you measure this key figures, you don't add the age of every body, because that doesn't make any sense, but adding the sum of all deliveries, or adding all Sales does make sense, that is the difference between the two key figures.
Characteristics: are anything which couldn't be quantitatively measured: material, customer, plant, employee ID and so on...
Aways, in BI you measure the KF against the Key figures..
thanks.
Wond

Remove scaling factor from key figure - still shows in Report !

Hi all,
A key figure we use somehow had its scaling factor set to 100.
This was accidental, so I have changed the key figure to have no scaling factor and then activated it.
The query that uses this key figure still sees it as having the 100 scaling factor however. While this is the case, I cannot set it to no scaling factor as needed.
I have tried adding this key figure to a new report and it still comes in with the incorrect scaling factor setting.
So far I have tried,
Changed the scaling factor on the key figure to none and activated.
Regenerated the query through rsrt
Removing the key figure from the query and then readding as well as adding the key figure to a entirely new report. Incorrect scaling setting still comes through in both cases.
Checked table RSDIKYFPRO and RSDKYF - both of which have no scaling as their settings for this key figure.
I know that I could created a restricted key figure in the query from the original and set the scaling factor to none to get around the problem, however I would like the query to see the settings in the key figure.
Can anyone suggest how I can resolve this ?
Many thanks,
Blair

Was there ever a solution to this problem? I, too, have noticed the same issue. The key figure properties (in my case, # of decimal places) is not inherited in the query, and the only solution was to change the kf properties directly in the query, which I shouldn't have to do. The selection of decimal places "from key figure (0)" does not work; I have to override this and select "0". Anyone seen any notes or anything to fix this?
Thanks.
Rachel

How to Create a Restricted Key Figure in BO Webi Report

Hi Experts,
Please tell me How to Create a Restricted Key Figure in BO Webi Report.
Thanks in Advance.
Regards,
Rafi

Hi,
1. Define a new measure in the designer.
2. In the select clause give the reference to the key figure on which restriction to be applied.
For example
@Select(Key Figures\Number of Records)
3. In the where clause, give the MDX expression for the filter to be applied.
For example
<FILTER KEY="[0PURCH_ORG].[LEVEL01]">
<CONDITION OPERATORCONDITION="InList">
<CONSTANT CAPTION="HAS"/>
</CONDITION>
</FILTER>
Regards

Copying Key figures between flexible sop info structures

Shall we use mcsz or olix to copy key figures between the infostructures planned with level by level planning. or Defining user methods and copy profile is mandatory??

Hello,
What was the correct transaction?
I am trying to accomplish the same.
I'm not sure to use MCSZ or MC7M to create the copy method.
Thanks,
Heidi
Edited by: Heidi Morosini on Feb 25, 2009 6:32 PM

Mixing Key Figures and Characteristics in 2004s Table Display

In a 3.x query definition using table display, I could put a key figure in the middle of the characteristics. The results would be columns Char1, Char2, KF1, Char3, for example. The same query upgraded to 2004s insists on displaying the key figure at the end of the characteristics, even with the Query Properties / Data Formatting set to Tabular View (in BEx Analyzer).
Any ideas on how to keep the key figure in the middle of the characteristics?
Thanks.

Hi,
New QD wont support table display. You need to use Report designer for this.
Thanks & Best Regards,
Rajani

How achieve "cumulated" key figure in a webi report

Hi all,
In a bex query we can mark "cumulated" in properties of characteristic, then when we run this query our key figures for this characteristic will be cumulated but for rest of characteristics will be non cumulated values. Please how can I get this cumulated valued in a webi report ?? because in spite of mark this flag in our bex query when I run this characteristic in my webi report it doesnt work. Perphaps there is a function in webi or there is a proporty to modify in my universe??
Thanks for your help in advance
Santi

Hi David,
Try using RunningSum(), RunningAverage() etc.. function in Web-I.
Regards,
Rohit

How to use Restricted or Calculated Key figure with Characteristics?

Hi,
Query has characteristics 'Indicator' which has values 'X' and 'Y' depending this value, the Key figure Quantity(which is always +ve) has to be shown on the report either as -ve or +ve.
Do I use Restricted Key figure if so, how? Or can I manage with a Calculated Key figure?
Thanks,
Kamala

Hi Kamala,
You can create 2 RFKs each in which you are restricting the KF with char value X and Y. For the one that needs to be -ve, create a CKF with this RKF and multiply it by -1 in the formula. Then you can create a new CKF that will add this CKF and the other RKF.
Hope this helps...

How to add the required characterists and key figures to drill down report?

hi,
i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?

Hi Inna,
Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
Thanks for your understanding.
Regards,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Key figure data in BEx report

Hi,
We are viewing some of the Key figure data of a particular report as ".", "$21.99MIN" etc, where $21.99 is the original value. When we click on the excel sheet cell and view in the formula bar, data is showing $21.99 correctly. But it is appearing as "$21.99MIN". In some places just"." is appearing where data can be seen in the formula bar.
Tried, converting to Formula option, with which we can see the numbers but as usual it is behaving as a normal excel sheet after applying the function.
Please suggest how to view the correct data for the report.
Regards

Hi,
Thanks for the reply.
It is a direct key figure. Two key figures in the query are displayed like this, while other KFs are displating the values as it is. Also i checked the data in Multi provider, BEx definition of the info object etc, there is no problem.
Regards

Customer-Specific Key Figure and MCI3 analysis report

Hi,
We have created a "Customer-Specific Key Figures" in customizing and mapped the key with value category. But this new defined key figure is not available in the report MCI3.
How to get this figure in the analysis report MCI3 etc , i.e. how to update the information structure S115.
Regards

Hello,
You have to develope the new programme using that info structure and update that new value field in your customising logic programe .
Regards,
Rakesh

Copy Key Figures between Queries

Hi BI Gurus
I have two Queries 'Query-1' and 'Query-2' on the same InfoCube.
I want to make another query 'Query-3' which is the combination of 'Query-1' and 'Query-2'.
I have saved 'Query-1' as 'Query-3'.
Now, I want to add all the Key Figures in 'Query-2' into 'Query-3'.
All the 3 queries are on the same InfoProvider.
Please guide.
Regards

HI Anil
As mentioned by you that all th e thre queries are on same infoprovider hence all the key fig of that infoprovider are available to you in all the quries. If a key fig is created locally then save it in a structure and copy that structure in the new query.
Dinesh Sharma

Report Painter - Characteristic cannot be combined with key figures

Hi,
I have added a new field (ZZABTEI) to the report structure CCSS and using that field as a characteristic in the report. But when I execute the report, it is giving the error "Characteristic ZZABTEI cannot be combined with key figures". Can anyone help me to solve this issue.
Thank you,
Rekha

There no code for this. I had to add the new field to CCSS structure. Then there were some configuration to be done. Then this message is got when the report in the report painter is executed. The details of this error message is as follows :
Characteristic ZZABTEI cannot be combined with key figures
Message no. GR410
Diagnosis
Characteristic ZZABTEI is being used in a report with a key figure that does not match this characteristic.
System Response
The system cancels generation.
Procedure
Check the report definition: the key figures used must be compatible with characteristic ZZABTEI. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.
Technical explanation: The Report Writer table assigned to the report is defined as a view with multiple database tables (somewhat similar to Report Writer table CCSS) and a key figure used in the report refers to a database table which does not contain characteristic ZZABTEI.
Example 1 for table CCSS: If the 'cost' or 'quantity' key figures are used in a report (referring to tables COSP and COSS), you cannot use the 'Statistical key figure' (only occurs in table COSR) characteristic in the rows. On the contrary, using the 'Cost element' (tables COSP and COSS) characteristic is not permitted for the 'Statistical quantity' (table COSR) key figure.
Example 2 for table CCSS: If a report only displays line item data (key figures IE... or PE...), you cannot use the 'PERBL' characteristic, because it is only valid for summary data. You have to use the 'PERIO' characteristic for line item data.
Thank you,
Rekha

Restricted Key Figure in Crystal Reports

Hi Gurus, I have to implement the Restricted Key figure logic in Crystal reports. I am able to filter the data at a report level but I need to filter the key figure with a particular characteristics. We try to implement this logic with subreport but client is forcing us not to use subreports. Please help me.
Thanks
Sasi

Hi,
you should make the restricted keyfigure as part of the BW query and Crystal Reports will leverage it.
Ingo

Key figures between Characteristics in Report

Similar Messages

Maybe you are looking for