Key figures in cost element based report

Dear All,
  I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
  The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
  Thanks in advance !
Regards,
Mahendra Dighe

Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
Employee has three records in the time range.
Salary infoprovider has only one.
Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

Similar Messages

  • Key figures in Cost elemnt based report

    Dear All,
    I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
    The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
    Thanks in advance !
    Regards,
    Mahendra Dighe

    Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
    Employee has three records in the time range.
    Salary infoprovider has only one.
    Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
    Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

  • Maintenance Cost Key Figures in MCI3 and MCI8 Reports

    we are using ECC6 EHP4 version. Maintenance Cost Key Figures in MCI3 and MCI8 Reports are not reflected the cost as given in different value categories in work orders. I have configrured the PMIS "Assign Value Categories to Maintenance Cost Key Figures" and Valuation Cateogies are also rightly configured. is it some bug or am I missing some thing. Please help

    Thanks for your help.
    I checked transaction code OMOS. all infor structure are on monthly update which is fair. however, I rebuilt the info structure through folllowing navigation path and it worked.
    believe ur info structure S070-MCI7 is not getting update correctly , suggest u to run a statistical update via
    Logistics - General + Logistics Information System (LIS) + Logistics Data Warehouse + Data Basis + Tools + Setup of Statistical Data + Application-specific Setup of Statistical Data + Perform Setup - Plant Maintenance ..

  • Cost element wise report

    Hai,
    How to develope cost element wise report, i mean what are the tables and fields to be used for this.

    Hi,
    Field - KOSTL - Cost Center
              KSTAR - Cost element
    Tables : CSSK
                 CSKS
                 CSKB
                 CSKT
                 CKIS
                 CKHS
                 BSEG
                 BSIS
                 BSAD
                 EKKN
    Thanks,
    Senthil

  • How to find if one key figure is used in any report

    Dear Experts ,
    I have one key figure info object .I wanted to know how to find this key figure is used in which report .
    As I know "where used list " but this will not help me .
    Any suggestions please share .
    Puru

    Hi Puru,
    Try following approach,
    goto RSZELTTXT table and put your key figure name in the long text and click on execute. Get the list of all the ETULID's and go to table RSZCOMPDIR from this table for all the ETLUID's get all the list of COMPUID's and from COMPUID's you will be able to find all the reports from RSRREPDIR in which that key figure is getting used.
    Regards,
    Durgesh.

  • Restriction to only cost element based  planning against WBS

    HI Expert,
    here we need a scenario, like...user can only do cost element based planning against WBS.
    He should not be allowed to enter any manula cost directly against WBS.
    How to address  this issue.
    thanx in adv.
    regards
    Ashis

    Hi,
      Go to CJR2 t-code select the layout 1-702 and enter the wbs, cost element, periods, year and version and execute the transaction. Then enter the values and save.
    Remove the autorization for CJ40.
    Rgds
    Sudhir Reddy

  • Difference in key figures while creating queries based on infosets and MP?

    Hi all,
    I have created a multi provider using 4 ods. and my keyfigures looks like
    Material    cost        tax amount
    mdb1001  14.58     219.18
    and i have created an infoset using the same 4 ods and my keyfigures looks different like
    Material      cost      tax amount
    mdb1001  21,698       1,433.42
    And i have created the query with the same options. But the key figure values are different why is that so ?
    Can anyone help me on this!!!
    thanxs
    haritha

    hi,
    check your created infoset on the same ods used in multiprovider for reporting.
    are you doing any delta loading to the ods check that also.
    hope this help you
    regards
    harikrishna N

  • Cost center/Cost element summarize report

    Hi,
    I would like to know if there is any report to display cost center data summarize by cost element, displaying in one column cost center, in another one cost element and in another one the amount.
    I have done it in KSB5 but I have to display all the information and the summarize and it takes a lot of time, is there any other option to obtain this information?
    Thank you very much!

    Hi,
    What about this one? S_ALR_87013611 - Cost Centers: Actual/Plan/Variance
    If you don't want cost centre to appear in the tree, but just next to cost element, you can create your own report based on this one, putting cost centre field in the main layout (GRR1).
    Regards,
    Eli

  • Dynamically select Key Figures before executing web-based query

    Hi,
    I want to select(through checkbox) the Key Figures to be presented in a query before executing the query. The query is web-based.
    Has anybody an idea how to achieve this?
    Kind regards,
    Ton van Velzen

    You will need 2 templates.
    First one use the Checkbox item to list all the keyfigure structure elements, read the user selections using JavaScript, form the URL with the Filters for the key Figures and call the second template which will display the data.
    See the attached for passing filter values to BW Web templates.
    http://help.sap.com/saphelp_nw04/helpdata/en/59/edfe395dd76846e10000000a114084/content.htm

  • Web templete showing "EA" in the Key figure but not in Bex Report

    Hi,
    When I exucute my query in BEx , the report works fine , but while exucuting in Web , "EA" is getting added after every Key figure Value..
    Can you pls help us with any input ?

    Ajay,
    I think you did't understood the problem correctly .
    My Bex report don't have any Quantity Key figure So in bex report no Unit( If I think EA is Unit )  is coming . Same should come while executing in Web . But the Problem is in Web some EA symbol is coming .
    N.B : Our system just undergone SP upgrade .

  • COST Element Based Planning

    Hello All,
    We are trying to plan cost of WBS Element based on cost elements.
    what we are trying to do -
    > CJ40, we want to plan on cost element level so on clicking the button "primary costs" (or via the menu: "Extras -> detailed planning -> Primary costs") we end up in an error message saying -
    Group INT-2 does not contain any entries
    Message no. K8004
    Diagnosis
    Group INT-2 does not contain any single values. You cannot use it in planning.
    System Response
    The SAP System rejects the planning layout and your entry.
    Procedure
    Use either a different group or enter values for group INT-2.
    CONFIGURATION for Planning Profile (T Code - OPSB) for the planning profile used in WBS Element Primary cost element group assigned is INT-2.
    Question2
    - Does cost element planning influenced by the cost element group assigned in the planning profile.
    - How to solve this error.
    Points assured.
    Warm Regards,
    Jatinder Bansal

    this is because in planning profile (Txn OPSB) you have INT-2 as cost element group and there are no cost elements assigned as pointed out by Venkat
    use transaction CJR2 instead of CJ40 and then plan for any cost element group or cost element that you already have

  • Expand clustered Key Figures in filter panel (based on BW queries)

    Dear colleagues,
    in my BW query, I have created several key figures and have clustered them below Error Categorization 1 and 2.
    In my Design Studio application I use a filter panel to select the key figures. The goal is to show the first level (error cateogization 1 and 2) at a first view with the option to expand these so that the detailed categories can be shown and selected.
    Currently only the subcategories are shown in the filter panel in Design Studio.
    Could you help here?
    Thanks,
    Katharina

    Go to transaction RSRT, select your query, click on the properties tab and tick the selection box "Use Selection of Structure Elements". This is recommended practice where there are lots of key figures.

  • Calculate key figures are not important to reports

    Hello Experts,
    How can I delete a calculated key figure from the query when the change of report query is not accessible from the analyzer?
    Thank you

    If you can create a new workbook you can. Simpy right-click on "Key figures" in the BEx Analyzer, remove the specific C-KF from the displayed list of keyfigures and the save the Workbook. You should check if you have the authorization rights to save this new Workbook into existing roles, or just your Favourites.
    Altering the Query is a bit more work though.

  • Key Figure values in the Bex Report are different from the cube

    Hi all,
    When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
    When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
    Could some one help me find a solution to this issue.
    I look forward to hearing from the experts.
    Regards,
    S.P

    Hi Arun and  Zegion,
    Thank you for your responses.
    Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
    the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
    Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
    Regards,
    S.P

  • Key figure schema in CO-PA reporting

    Hallo SAP Gurus,
    Is there any method to copy the key figure schema created in one operating concern to other operating concern in the same client?
    In our company, we have 18 operating concerns for 18 company codes.
    I have created one key figure schema for one of the operating concern ( Since as per my knowledge, key figure schema can be created only at the operating concern level. )
    Now, since the schema is common to all the operating concerns, I want to copy the same to the other 17 operating concerns.
    Expecting your help since creating key figure schema 18 times and updating any changes is very much time consuming.
    regards,
    Viswanathan T R

    Hi Vishwanathan,
    I have a same requirement, I want to do KECP because this is asking us to give the transport request and I know when we create key figure scheme we save it under a transport request.
    Did KECP help you in doing that? If not, please let me know how did you copy key figure scheme from one operating concern to other.
    Thanks
    Srinath

Maybe you are looking for

  • Start routine error - infosource 2LIS_13_VDITM

    Hello, During the activation of the standard InfoCube 0SD_C03 (Sales: Overview), I have encountered a problem in a transformation between the infosource 2LIS_13_VDITM and the afrementioned Cube (this transformation has been transferred during the act

  • Reports 6i to 10g

    After migrating from Forms6i/Reports6i, the reports are not running. The migration process added rp2rro library and changed the run product to rp2rro.rp2rro_run_product. I compiled rp2rro.pll and attached it. But still report is not running. here is

  • How do I lower the brightnes of my desktop environment?

    I know there is asked before about setting the brightness but I didn't find a nice answer. Maibe there is none. But if there is I'd like to know in simple steps what I'm supposed to do... I can hardly look at my screen so bright... hurts my eyes... I

  • Adobe Acrobat 6.0 Professional Problem

    The subject software freezes upon opening and will not get beyond the initial start-up screen. Eventually after 10 minutes a syntax error will be displayed. I have attempted to repair the program many times and have also remove the program 3 times an

  • How to get my printer to be compatible with AirPrint

    How to print using Canon MX860 printer.