Key figures in Cost elemnt based report

Dear All,
I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
Thanks in advance !
Regards,
Mahendra Dighe

Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
Employee has three records in the time range.
Salary infoprovider has only one.
Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

Similar Messages

  • Key figures in cost element based report

    Dear All,
      I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
      The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
      Thanks in advance !
    Regards,
    Mahendra Dighe

    Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
    Employee has three records in the time range.
    Salary infoprovider has only one.
    Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
    Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

  • Maintenance Cost Key Figures in MCI3 and MCI8 Reports

    we are using ECC6 EHP4 version. Maintenance Cost Key Figures in MCI3 and MCI8 Reports are not reflected the cost as given in different value categories in work orders. I have configrured the PMIS "Assign Value Categories to Maintenance Cost Key Figures" and Valuation Cateogies are also rightly configured. is it some bug or am I missing some thing. Please help

    Thanks for your help.
    I checked transaction code OMOS. all infor structure are on monthly update which is fair. however, I rebuilt the info structure through folllowing navigation path and it worked.
    believe ur info structure S070-MCI7 is not getting update correctly , suggest u to run a statistical update via
    Logistics - General + Logistics Information System (LIS) + Logistics Data Warehouse + Data Basis + Tools + Setup of Statistical Data + Application-specific Setup of Statistical Data + Perform Setup - Plant Maintenance ..

  • How to find if one key figure is used in any report

    Dear Experts ,
    I have one key figure info object .I wanted to know how to find this key figure is used in which report .
    As I know "where used list " but this will not help me .
    Any suggestions please share .
    Puru

    Hi Puru,
    Try following approach,
    goto RSZELTTXT table and put your key figure name in the long text and click on execute. Get the list of all the ETULID's and go to table RSZCOMPDIR from this table for all the ETLUID's get all the list of COMPUID's and from COMPUID's you will be able to find all the reports from RSRREPDIR in which that key figure is getting used.
    Regards,
    Durgesh.

  • Difference in key figures while creating queries based on infosets and MP?

    Hi all,
    I have created a multi provider using 4 ods. and my keyfigures looks like
    Material    cost        tax amount
    mdb1001  14.58     219.18
    and i have created an infoset using the same 4 ods and my keyfigures looks different like
    Material      cost      tax amount
    mdb1001  21,698       1,433.42
    And i have created the query with the same options. But the key figure values are different why is that so ?
    Can anyone help me on this!!!
    thanxs
    haritha

    hi,
    check your created infoset on the same ods used in multiprovider for reporting.
    are you doing any delta loading to the ods check that also.
    hope this help you
    regards
    harikrishna N

  • Web templete showing "EA" in the Key figure but not in Bex Report

    Hi,
    When I exucute my query in BEx , the report works fine , but while exucuting in Web , "EA" is getting added after every Key figure Value..
    Can you pls help us with any input ?

    Ajay,
    I think you did't understood the problem correctly .
    My Bex report don't have any Quantity Key figure So in bex report no Unit( If I think EA is Unit )  is coming . Same should come while executing in Web . But the Problem is in Web some EA symbol is coming .
    N.B : Our system just undergone SP upgrade .

  • Dynamically select Key Figures before executing web-based query

    Hi,
    I want to select(through checkbox) the Key Figures to be presented in a query before executing the query. The query is web-based.
    Has anybody an idea how to achieve this?
    Kind regards,
    Ton van Velzen

    You will need 2 templates.
    First one use the Checkbox item to list all the keyfigure structure elements, read the user selections using JavaScript, form the URL with the Filters for the key Figures and call the second template which will display the data.
    See the attached for passing filter values to BW Web templates.
    http://help.sap.com/saphelp_nw04/helpdata/en/59/edfe395dd76846e10000000a114084/content.htm

  • Calculate key figures are not important to reports

    Hello Experts,
    How can I delete a calculated key figure from the query when the change of report query is not accessible from the analyzer?
    Thank you

    If you can create a new workbook you can. Simpy right-click on "Key figures" in the BEx Analyzer, remove the specific C-KF from the displayed list of keyfigures and the save the Workbook. You should check if you have the authorization rights to save this new Workbook into existing roles, or just your Favourites.
    Altering the Query is a bit more work though.

  • Key Figure values in the Bex Report are different from the cube

    Hi all,
    When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
    When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
    Could some one help me find a solution to this issue.
    I look forward to hearing from the experts.
    Regards,
    S.P

    Hi Arun and  Zegion,
    Thank you for your responses.
    Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
    the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
    Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
    Regards,
    S.P

  • Key figure schema in CO-PA reporting

    Hallo SAP Gurus,
    Is there any method to copy the key figure schema created in one operating concern to other operating concern in the same client?
    In our company, we have 18 operating concerns for 18 company codes.
    I have created one key figure schema for one of the operating concern ( Since as per my knowledge, key figure schema can be created only at the operating concern level. )
    Now, since the schema is common to all the operating concerns, I want to copy the same to the other 17 operating concerns.
    Expecting your help since creating key figure schema 18 times and updating any changes is very much time consuming.
    regards,
    Viswanathan T R

    Hi Vishwanathan,
    I have a same requirement, I want to do KECP because this is asking us to give the transport request and I know when we create key figure scheme we save it under a transport request.
    Did KECP help you in doing that? If not, please let me know how did you copy key figure scheme from one operating concern to other.
    Thanks
    Srinath

  • Expand clustered Key Figures in filter panel (based on BW queries)

    Dear colleagues,
    in my BW query, I have created several key figures and have clustered them below Error Categorization 1 and 2.
    In my Design Studio application I use a filter panel to select the key figures. The goal is to show the first level (error cateogization 1 and 2) at a first view with the option to expand these so that the detailed categories can be shown and selected.
    Currently only the subcategories are shown in the filter panel in Design Studio.
    Could you help here?
    Thanks,
    Katharina

    Go to transaction RSRT, select your query, click on the properties tab and tick the selection box "Use Selection of Structure Elements". This is recommended practice where there are lots of key figures.

  • Change comma and period in key figure presentation in BEx WAD reports

    Hi gurus
    We run our BEx WAD reports in the SAP portal. By default the thousands separator is period and the decimal separator is comma. How can I change this so the period becomes the decimal separator and the comma becomes the thousands separator?
    Kind regards
    Erik

    Hi Erik,
    you can change this by setting at user parameters.
    At system, at any screen (RSA1) -> menu SYSTEM- > USER PROFILE -> OWN DATA ->  Defaults Tab, here you can change.
    and Save.
    these will reflect in WAD report output.
    Best Regards.

  • Calculations for Key Figure at CUBE Level or REPORTING Level

    Hi Folks,
    What are the conditions to decide whether we need to go for keyfigure calculations at infocube level or at reporting level.
    How to achieve them if done at cube level.
    Could anyone provide some KT with examples?
    Regards
    Kittu

    Hi,
    I got your point.
    Could you tell me how to use below mentioned formula at transformation time?
    In brief the formula calculates the number of policies using field  " s endorsement type".
    Formula is as below:
    SUM(CASE WHEN S Endorsementtype IN ('004','015') THEN -1 WHEN S Endorsementtype IS NULL  AND S Gross IS NOT NULL  THEN 1 ELSE 0 END)
    No of policies is a calculated keyfigure.I dont have this field in my datasource.
    could you tell me the steps ?
    Regards
    kittu

  • Cost key figure report

    Hi
    all
    cam some one told me the trs for cost key figure report
    i assign the value categories in pm to sap standard cost key figures
    how to get the report on the basis of this

    hi,
    all
    i want to settle maintenance order
    i know the maint activity type flows to maintenance equipment cost centre the work center work hours
    i don't understand the cost flow of material from sprees account to the equipment cost centre account
    when i settle the order.
    if itick the by cost element and receiver category cost centre
    how the assignments mentioned in allocation structure links with the spares material cost element
    can some body explain me

  • Report Painter - Characteristic cannot be combined with key figures

    Hi,
    I have added a new field (ZZABTEI) to the report structure CCSS and using that field as a characteristic in the report. But when I execute the report, it is giving the error "Characteristic ZZABTEI cannot be combined with key figures". Can anyone help me to solve this issue.
    Thank you,
    Rekha

    There no code for this. I had to add the new field to CCSS structure. Then there were some configuration to be done. Then this message is got when the report in the report painter is executed. The details of this error message is as follows :
    Characteristic ZZABTEI cannot be combined with key figures
    Message no. GR410
    Diagnosis
    Characteristic ZZABTEI is being used in a report with a key figure that does not match this characteristic.
    System Response
    The system cancels generation.
    Procedure
    Check the report definition: the key figures used must be compatible with characteristic ZZABTEI. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.
    Technical explanation: The Report Writer table assigned to the report is defined as a view with multiple database tables (somewhat similar to Report Writer table CCSS) and a key figure used in the report refers to a database table which does not contain characteristic ZZABTEI.
    Example 1 for table CCSS: If the 'cost' or 'quantity' key figures are used in a report (referring to tables COSP and COSS), you cannot use the 'Statistical key figure' (only occurs in table COSR) characteristic in the rows. On the contrary, using the 'Cost element' (tables COSP and COSS) characteristic is not permitted for the 'Statistical quantity' (table COSR) key figure.
    Example 2 for table CCSS: If a report only displays line item data (key figures IE... or PE...), you cannot use the 'PERBL' characteristic, because it is only valid for summary data. You have to use the 'PERIO' characteristic for line item data.
    Thank you,
    Rekha

Maybe you are looking for

  • Updates to the 10.7.1 software update cannot be used!

    Updates to the 10.7.1 software update cannot be used! Why? I have nothing to delete! Software update cannot check for updates, because of network problems. My network is no problem, I can open a webpage!

  • TomCat Server 5.0

    dear friends, i am very new to java technology. now i downloaded j2ee in windows but it is not working. some people told me to install tomcat server as webserver. so plz tell me how can i download tomcat server. plz tell me in deatail the process. be

  • Syncing photos to iPod makes my iTunes crash

    I just bought my 4G Nano(Third-Generation) a week ago. It works fine at music. But everytime i try to sync my photos to iPod my iTunes crash. I put all my photos into one directory (5MB, 110pics, all low res picture), then start sync them in iTunes.

  • Learning order

    I gotta start learning the foll. servlets,EJB,JDBC (am familiar with other basic java concepts) which order is the best ? pls can someone suggest as am unsure abt how they are inter-related thanx in advance :)

  • Why JobCreatedEvent and JobExecutionEvent were not raised

    I am playing with OC4J 10.1.3 Job Scheduler. I don't understand why the event listener doesn't work as expected. The following is my code: package demo; import java.util.Date; import oracle.ias.scheduler.*; import oracle.ias.scheduler.event.*; public