Key Figures in the middle of the report

Hi
  We have a req where we have 20 chars and 3 KFs ...We need to put this KFs in the middle of some chars...
eg:
char1, char2....Char10,KF1,KF2,KF3,Char11,Char12....Char20
Presently we are using a macro to satisfy this requriment. But changing the macro each time when we need updations is very complex and time consuming.
Can any one know how to put the KFs in the middle of Rows using Bex ?
Regards

Hello,
  Create 2 queries as follows:
1)
  Char1
  char2
  KF1
  KF2
2)
  Char3
  char4
  KF1
  KF2
Create WORKBOOK include query 2 in sheet2
Refer those Cell into sheet1 after the KF1 KF2
I guess it helps
Thanks,
KC.

Similar Messages

  • Added new key figure in the report

    Experts,
    I have added new key figure in the report .If i display this key figure value in the report it is populating correct value with ERROR(example 22.5 ERROR).The report is on the multiprovider .i have check the value for this in multiprovider it is populating correctly .There is no calculation in the report for this .While extracting in to report i am getting this. Help me to resolve this issue.
    Thanks
    Murali

    Hi,
    I have already created a formula like NODIM(Key field).that only i am using .
    and mapping I did in this way. I went to multiprovider and I have selected this key figure and right click and select (assign) then I have click on create proposal for all infoobjects option.
    Please suggest any thing need to do.
    I am sorry .I did not understand the lonterm solution suggested by you .what is UOM .Please tell me how to map.can you pls tell me clearly please
    Thanks
    Murali

  • How can i display all the Coloumns (Key Figures) in the Report's same page

    Hi All,
    I am currently working on the BI 7.0 reporting. In the BEx Query Designer report, I am having 13 coloumns (7 Key figures and 6 Formulas) in the report. It is now displaying 10 coloumns in the First page of report. The other 3 coloumns can be seen by clicking on the next page. But the requirement is to see coloumns in the SAME PAGE.
    Are there any settings OR any other thing in the Query Designer, which can enable me to see all the coloumns on SAME page. The users are not interested in scrolling next page for 3 coloumns.
    Appreciates the Quick help/Response, please.
    Regards
    Ramana

    In Web Application Designer, for the properties of your analysis webitem under the Paging category, change parameter 'Number of Data Columns Displayed at Once' (BLOCK_COLUMNS_SIZE) to 0.  This will make all columns show instead of paginating as it is doing now.

  • Conditions on key figures in the report

    Hi All,
    I have a report requirement where I have to display the orders which have the Net Value = 0 and the Cost > 0. Can I do something like this using formulas in BEx? If so, can someone please give me the process to do it?
    Thanks,
    RPK.

    Hi RPK,
    Create one formula figure (lets named it as 'F1' ( Calculated key figure ) which should look like
    (IF  NET VALUE == 0 and if COST > 0 )
    Create conditions on the query and in the condition specify F1 > 0 .
    And result will be as per expectation
    Hope that helps.
    Regards
    Mr Kapadia

  • Business Process: Final Demand Plan Key Figure in the past for APO DP

    Hello APO process experts,
    I have a BPX question for APO DP process owners, consultants or gurus:
    1.- Have you ever seen in any SAP APO customer, that in their APO DP planning books, they chose or designed to update the Final Demand Plan key Figure in the past closed historical buckets with the Actual Sales?
    Meaning that that in the Past closed historical Buckets, Actual Sales and Final Demand Plan, look exactily the same.
    Meaning that they create a dynamic Final Demand Plan key figure so to speak, yet they did not choose to create a key figure that also keeps the Final Demand Plan as originally entered.
    2.- Would you think that doing the above, without keeping any keyfigure in the planning book that actually shows what the Final Demand Plan was in the Past, is a good practice?
         The Demand Planner could still retreive the Final Demand Plan from BI reports, yet, dynamically they could never really see it in the planning book.
    3.- Do you think the above dynamic key figure would bias the Demand Planner's behaviour to manipulate the future open Final Demand Plan buckets to enter volumes in order sum to a monthly total, independently of what were the over and underachievements in the past (since they are not really visible to him) ?
    I would really like your feedback,
    thanks in advance!
    JD Loera

    Hello Thanks for your feedback.
    I agree with your point, and I hope that i still get more feedback from other Business Process Experts.
    I am trying to build a case for my client, to challenge the decision of their initial design as this practice is going to hurt the Demand Management process, if what they intend to achieve is a true "unconstrained demand plan"
    Much appreciated
    JD Loera

  • Display key in the selection screen and Key & Text in the report

    Hi,
    For the infoobject in the query,
    In the variable selection screen When i want to select any value it should display only key, and in the report i want to display key and text of that infoobject.
    Is it possible?
    Thanks
    Rani

    Hi
    Display As
    Here you determine whether and in what format the individual characteristic values of the characteristic are presented:
    ·        (Standard): The standard display type for characteristic values corresponds to the setting in InfoObject maintenance under Tab Page: Business Explorer.
    ·        No Display: The characteristic display is hidden. This function is useful, for example, with the currency/unit characteristic as the currencies are also shown in the key figures.
    ·        Key and Text: The characteristic values are displayed by their technical key and text.
    ·        Text: The characteristic values are displayed by their text.
    ·        Key: The characteristic values are displayed by their technical key.
    ·        Text and Key: The characteristic values are displayed by their text and technical key.
    In the dropdown box below, you can select the type of text you want to use if you set a display type that contains text. The following options are available:
    ·        Standard: The shortest available text for the characteristic values is used as the text.
    ·        Short text: The short text for the characteristic values is used as the text.
    ·        Long text: The long text for the characteristic values is used as the text.
    ·        Medium text: The medium text for the characteristic values is used as the text.

  • New Formula as a Key Figure in the New Selection

    Hi,
    In the Cell Editor, is it possible to include the New Formula as the Key Figure in the New Selection?
    Please find below the Cell Editor. I have just given the sample of my requirement.
    Column A                                         Column B
    A1) Net Sales ( Cell Reference)             B1)
    A2)                                             B2) Inventories ( Cell Reference)
    A3)                                             B3) Inventory Days ( New Formula)
    A4)                                             B4)
    My Requirement is in the Cell B4 I want to create a New Selection in which the Key Figure should be the Inventory Days ie the cell B3.
    Is it possible to include and if so how.
    Thanks,
    Rajesh Janardanan

    Hi,
    Yes you can change this display by following path in tcode :spro
    Goto >SPRO>SAP Reference IMG>SAP Netweaver>Business Intelligence>Settings for reporting and analysis>General settings for reporting and analysis--> Set alternative currency display(table RSRCURRDISP).
    Flag = A     After value
    Flag = B     Before value
    hope it helps..
    regards,
    Raju

  • Query Designer - Key Figures on the Rows

    Hi experts,
    I inserted in a query the key figures into the rows.
    I would like to see on the report the "KEY" of these key figures and not the "TEXT", but I can't find a way to do that.
    Can anyone help me?
    TIA
    c.

    Hi,
    I developed the couple of reports but iam able to see the text in char and can u tell me where is  the option to see key and text for keyfigure.if not is not theere explanin little bit and busines requirement
    would like to see on the report the "KEY" of these key figures and not the "TEXT", but I can't find a way to do that.

  • Poplulate key figure thru the start routine

    Hi Experts,
    I have update rules for my cube. In the start routine there, if i wrote abap code would it automatically fill the value of key figures in the cube. Can we do that with the ABAP code ?
    Or do i have to go to each key figure's routine and then refer to the internal table data in the update rules etc.
    If someone has done this before, would you pls walk me thru it.
    Thank you,
    T

    Hi Tia Ismail,
    I hope it is wrong to update the cube fields directly in the start routine.
    i,e
    <i>add DATA_PACKAGE-/bic/zslsgm to /bic/ft_mismets-/bic/Zslsgm.
    add DATA_PACKAGE-/bic/zsalesamt to /bic/ft_mismets-/bic/Zsalesamt.
    add DATA_PACKAGE-/bic/zinvlines to /bic/ft_mismets-/bic/zinvlines.</i>
    The above statements are wrong.
    Then start routing you will update the values (from blank to some value) for these fields. And also make 1 to 1 mapping Between these KF of info cube to Fields of Communication structure. i,e
    Zslsgm(Info cube KF) <---> Zslsgm(Communication structure field)
    Zsalesamt(Info cube KF) <---> Zsalesamt(Communication structure field)
    zinvlines (Info cube KF) <---> zinvlines(Communication
    structure field)
    The code you have to use in Start routine is :
    tables: /bic/pzproduct,
    /bic/ft_mismets.
    DATA ITAB like /bic/pZproduct occurs 0 with header line.
    select * from /bic/pzproduct into table itab where /bic/zproductlike 'misc%' and /bic/t_miscper is not null.
    Loop at DATA_PACKAGE.
    Loop at itab where
    /bic/zproduct <> DATA_PACKAGE-/bic/zproduct.
    DATA_PACKAGE-/bic/zslsgm = 0.
    DATA_PACKAGE--/bic/zinvlines = 0.
    DATA_PACKAGE-/bic/zsalesamt  = 0.
    Modify DATA_PACKAGE.
    endloop.
    ENDLOOP.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by: Anil Kumar Sharma

  • How to identify which key figure will the numeric pointer for deltas?

    Hi All,
    I have created a numeric pointer for generic extraction ? but how to identify which key figure will the numeric pointer will use for deltas ?
    how to identify the key figures which is suitable for numeric pointer. And the generic extraction is based upon the copa table?
    Can anyone suggest me how the numeric pointer works and how to identify deltas are carried out at numeric pointer?
    Thanks
    Pooja

    Pooja,
    If you are using a generic extractor which is based on COPA table, then numeric pointer may not be the suggested delta extraction mechanism. 
    A time stamp would be the better one to use.  In a time stamp, you can give a lower limit value of 300 seconds.. so that it will try to fetch the missed records.
    Moreover, a delta would be based on a character, preferably a time char.
    In your requirement, try to figure out the character on whichdeltas will be based.
    Sasi

  • Problems in using a calculated key figure in the Clustering Model

    We have a problem in using a calculated key figure in the clustering model. With the limitation of the standard, in the Field tab, each calculated key figure cannot be selected from the selection screen directly. According to the SAP help, we have to use a dummy infoobject for a calculated key figure.
    Are there any other ways to use a calculated key figure without using a dummy infoojbect?

    Hi,
    Make use of aggragation property of the keyfigure, for summing the values of that KF.
    Regards,
    Rajkandula

  • Subject: Displaying key figures without currency unit in BEX reports

    Hello,
    Is it possible to display key figures without currency unit in BEx reports? For example; Material Costs 1000 EUR
    should be shown as 1000. Currency unit EUR and also scaling factor (*1000 EUR) does not interest us.
    When we use display options in query properties, we just see an option of displaying key figures with/without scaling factors, which does not solve our problem.
    Thanks for your reply.
    Regards,
    Nuran Adal

    Hi Eugene,
    thank you very much for your quick reply. We have very detailed reports with min. 10 columns, I should have defined 10 more formula columns to realize this (NODIM), but anyway there is no other way to do this, am I right?
    Best Regards,
    Nuran

  • Populating the key figure in the Cube

    hi frineds,
         I need to populated the custom key fiugre added by me in the cube using the update rule. But if i see the tables of the cube it is seperate for every dimension and key figure. how can i select the particular record from the key figure table with out the reference of the dimensions table.
    Thanks
    Prem

    so you want to
    1. read particular record from cube
    2. populate the amount there.
    but populating the amount directly to infocube is not advisable and not feasible as well.
    my suggestion will be virtual infoprov based on transformation
    you will have to write your logic there and you can populate the amount based on billing number (you said you have amount against billing number).
    at query runtime based on transformation/logic your amount will be populated.
    only drawback reduced query performance

  • How to influence the text display of key figures in the interarctive DP

    Hello all,
    Does anyone know if there is a possibility (BADI, etc.) to change the text display of key figures (not characteristics!) in a planning book/data view?
    I know that you can define a free text in the data view but still, this is only one fixed text and it cannot be changed.
    Reason for the request: We would like to use the same key figure (and hence, indicate 2 different texts) for two different purposes (in different selections) without having to create a new data view.
    Kind regards,
    Klemens

    if you dont want a new data view and might even go to the extent of creating a user exit for this ... here is an idea
    - just create auxillary KF ( or use spare Temp KF depending on what you want to do with the data in the view) for each of these KF with the text
    lets say you have KF1 and KF2 - create KF1A and KF2A
    Make sure KF1A = KF1 and KF2a = KF2
    Now depending on user you can display KF 1 and KF2 or KF1a and KF2a depending on the user by using macros USER() and ROW_VISIBLE(0)

  • To delete and insert a new key figure in the cube

    Hi Experts...
                 How can I delete a key figure and insert a new key figure into a cube with data...? Should I be creating a new cube with the new key figure ?
    Thank you..
                Manohar....

    Hi
    Are you using Bi2004s
    yes you can delete,add,replace a key figure
    have a look at this blog for step by step procedure
    /people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
    hope this helps

  • Can we suppress the key figure from the filter values?

    Hi,
    I have one restricted key figure.
    1) Is it possible to hide the key figure for calender year 2009 and display it for year 2010. I mean can we hide the column dynamically?
    2) Can we grey out the key figure from filter criteia so that it cannot be checked for specific calender year?
    eg if i have 3 key figures as One , Two , Three.
    In filter , it will show One , two ,  three  and the checkbox . Is it possible to grey out the checkbox so that user will not be able to check it or tick it?
    Regards!

    Hi,
    1) I don't think we can hide it dynamically.
    2) I dont think we can give such a option in the query designer.can you explain what is ur exact requirement.
    Regards,
    Ravi

Maybe you are looking for