Key figures with Heirarchy in Bexquery not showing up in Snapshot/ Explorer

Hi,
I am taking a snapshot of a multiprovider in Explorer using T-code RSDDV.
In the related bex query I have a few calculated Key figure which I want to get it into the explorer tab / Key- figures. The idea here is to use these as measures within the Explorer portal.
The problem I am running into is if any of these key figures use Hierarchies I am not able to bring it in but without the hierarchies I have no issue.
Has someone come across this?
If you need more clarification please feel free to ask.
Thanks
bob

You have a beautiful example in the Oracle By Example Series here :
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_admin/biadmin.html#t2s7
If you follow the instruction on the Channels Detail_Key in this example, you will succeed
Success
Nico

Similar Messages

Key Figures With Hide can be shown showing wrong values when displayed in a query

Hi Experts,
I have a qiery with two structures in the column(cell Definition) three key figures are displayed and the rest are all hide can be displayed. However whenever i display one of the hidden key figures along with one displayed key figures it initially shoes incorrect values. Once i add another key figure (which has status always show) the hidden jey figure value gets corrected. Is it a problem with the structure? Kindly assist.For example when i display the actuals(always show) and actuals rate(hide can be shown) the values for actuals rate are wrong , however when i add the plan rate(always ahow) the values for actual rate gets corrected. Screenshots for structures below.

Hi Sayanto,
For this I would recommend you to check the Key figure definition in all 3 situations.
1. original display
2. display of hidden KF
3. Display of existing KF
I suspect that cell references may have some effect on the calculation as you are adding the hidden KF in analyzer directly. You can prove this only by checking Key figure definition.
Please let me know if you are facing any issue in getting the Key figure definition itself.
Also, as Cornelia suggested check if you have any constant selection applied to any of your KFs.
Hope this helps.
-Swati.

Add new key figure with characteristics in report painter

Hi expert,
I am create a new report painter in GRR2 under report group 8A2 (EC-PCA: Standard Reports) and i would like to create a report show on G/L amount with segment.
When i click on first column to assign "key figure with characteristics" i am not able to find characteristics "segment".
Please kindly advice how to create in new characteristics in report painter?
Thanks.
p/s : profit center number is same with segment number
regards,
ng chong chuan

Hi,
"segment" is not a characteristic of classical profit-center accounting (libraries 8A*). Its a New GL characteristic, thus create a report painter report for New GL library.
best regards, Christian

Can not Sorting by Key Figure with Analyzer and Excel 2007

Hello experts,
We have recently changed to Office 2007, and the funcionality of Sorting by a Key Figure with BEx Analyzer is desactivated.
We have applied the patch 10 for BEx BI 7.10.
Has anybody had the same problem?
Thanks in advanced.

Hi Patricia,
Have you got two structures in your query?
Please take a look at the following notes:
1378796 - Disabled Sorting when there is one struct. in the drilldown
1332267 - BExAnalyzer: changes in cell properties dialog / sorting
these should explain why the sort feature is no longer available in certain scenarios.
many thanks
Orla.

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

No values when using key figure with constant selection?

Hi experts,
I have built a Webi on top of a universe that is sitting on top of a Bex query.
In my Bex query I have a bunch of key figures defined that are restricted on time and category.
This Webi works fine.
Then I added an additional key figure that required a constant selection on time and on category.
When I first added this to my Webi report it was fine. But once I refreshed my report showed no values.
The report still seems to know that it is meant to retrieve values because it is bringing back the correct records - just no values. (ie I am showing time in my columns and it's showing the correct periods that are meant to have data)
I refreshed a number of times and sometimes it would bring "#TOREFRESH" in some cells but once I refreshed again the cells are blank. Sometimes it would even show me a value in a couple of cells and others would show the "#TOREFRESH"
I went back to my Bex query and removed the key figure with constant selection and the report is working again?
Has anyone experienced something similar? Is there a way to make this work?
Thank you!
Sabine

#TOREFRESH error message appears for smart measures (measure object with aggregation type Database Delegated) when the context for the measure is changed. Refreshing data will solve the issue. Database delegated measures are used for some non-additive aggregation which webi is not able to handle properly. If you are not using such aggregation, then tou can change the aggregation type to something other than database delegated to avoid #TOREFRESH.

Problems with page not showing up in Internet Explorer

I uploaded my page. All was fine. Looked good in all
browsers.
home.gci.net/~larry-and-jackie/index.htm
Now all of a sudden my index.htm page (also have default.htm
page) shows up as a black screen only no pictures. No words.
All of the sub pages show up fine if you add that to the
address. Just the Index. is not showing up in Internet Explorer.
Looks good in Firefox, Netscape and Safari.
example home.gci.net/~larry-and-jackie/index3.htm
Anybody have any suggestions?
J Whedbee

I'm seeing the entry page at:
http://home.gci.net/~larry-and-jackie/
with no problems.
I'm also seeing
http://home.gci.net/~larry-and-jackie/index.htm
with no
problems... pics, black background.
http://home.gci.net/~larry-and-jackie/default.htm
is just the same as
index.htm
http://home.gci.net/~larry-and-jackie/Index.htm
(note the capital "I" )
can't be seen .... no such file.
Not sure why you would have an index.htm and a default.htm
both really
aren't needed.
Have you tried clearing your browser cache?
Nadia
Adobe® Community Expert : Dreamweaver
Tutorials |SEO |Templates
http://www.DreamweaverResources.com
http://www.perrelink.com.au
CSS Tutorials for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/css.html
"J L Whedbee" <[email protected]> wrote in
message
news:enccnu$n4t$[email protected]..
>I uploaded my page. All was fine. Looked good in all
browsers.
>
> home.gci.net/~larry-and-jackie/index.htm
>
> Now all of a sudden my index.htm page (also have
default.htm page) shows
> up as
> a black screen only no pictures. No words.
>
> All of the sub pages show up fine if you add that to the
address. Just the
> Index. is not showing up in Internet Explorer.
> Looks good in Firefox, Netscape and Safari.
>
> example home.gci.net/~larry-and-jackie/index3.htm
>
> Anybody have any suggestions?
>
> J Whedbee
>
>
>

Search hover panel not showing up in Internet Explorer with custom master page

The hover panel is not showing up in internet explorer. I am using a custom master page and it works no problem in the other browsers. When I fire up the debugger there is an error message when i hover over a search result item:
I tried debugging the JavaScript but i am not sure what is going on with it.
Am I missing reference or something done like that? It has to be something simple because I have been scratching my head for a while on this.
Any ideas?
Brad Wight

Have you tried rendering the site in IE Compatability Mode? Compatability Mode solves a lot of problems in this area because older versions of IE had a unique interpretation of HTML code.
Start here:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-8
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Key figure with pre-calculated aggregation

Hello,
I have to model a key figure with a pre-calculated aggregation, that is, soruce flat files contain explicit values for months, quarters, halfyears and years. The key figure is a percentage (service quality) and the corresponding company department provides me with results for all aggregation levels.
I think that this case can be modeled with one InfoCube for each aggregation level and a Multicube but I have to create a high number of InfoCubes (aprox. 180).
I can get the formula that department uses, but it's possible on BW to change standard aggregation (SUM, MAX, MIN)?
Thanks in advance and regards,
Alberto Garcia.

Hi Alberto,
One of the ways of doing it could be -
add another field (char) to your cube called at "value Type" & assign different values to it depending upon the time value.
say Monthly - value type 1
Querter - value type 2
& so on ...
keep filling the same key figure.
at the time of reporting restrict your key figure accordingly with the value type. ( say need only montly key figure value restrict value type to "1")
hope it helps.
VC

How to make preflight profile witch find out if exist in document spot color with name "CutContour", if not show allert, I try many combinations but nothing works

How to make preflight profile witch find out if exist in document spot color with name "CutContour", if not show allert, I try many combinations but nothing works

Thanks very much for your help, but I'm still overlooking something. I double checked to make sure that I did not have a hidden .txt file extention. I then decided to abandon the lock on preferences idea until I get it working. I converted my mozilla.cfg file back to plain text. I made sure I do not have an extra blank line at the end of each file. The syntax looks good, as far as I can tell. I'll copy and paste what I have so far. Did I have the file locations correct posted above? Also, if you feel i can delete some lines of text in my mozilla.cfg file I'll be happy to do so.
mozilla.cfg
<pre><nowiki>//
pref("privacy.sanitize.sanitizeOnShutdown", true);
pref("privacy.sanitize.promptOnSanitize", false);
pref("browser.rights.override", true);
pref(“app.update.auto”, false);
pref(“extensions.blocklist.enabled”, false);
pref(“extensions.shownselectionUI”, true);
pref(“browser.shell.checkDefaultBrowser”, false);
pref(“toolkit.telemetry.enabled”, false);
pref(“toolkit.telemetry.prompted”, 2);
pref(“toolkit.telemetry.rejected”, true);
pref(“app.update.auto”, false);
pref(“browser.download.useDownloadDir”, true);
pref(“browser.search.update”, false);
pref(“signon.autofillForms”, false);
pref(“signon.rememberSignons”, false);
pref(“browser.download.manager.scanWhenDone”, true);
pref(“browser.formfill.enable”, false);
pref(“xpinstall.enabled”, true);</nowiki></pre>
channel-prefs.js
pref("app.update.channel", "release");
override.ini
[XRE]
EnableProfileMigrator=false
all-lmc.js
pref("general.config.filename", "mozilla.cfg");
defaultPref("browser.startup.homepage", "data:text/plain,browser.startup.homepage=http://bbc.co.uk");
Again, thank you very much for your time. Do I create my own browserconfig.properties, and firefox.js? Also, I forgot to mention I'm running Windows 8.

Gradient filled background is not showing up in Internet Explorer on a PC.

My gradient filled background is not showing up in Internet Explorer on a PC.
I'm working on a MAC, so I don't know of anyway to preview a new MUSE Site in I.E. since it's no longer supported on a Mac.
When the Home Page is viewed, my blue sky gradient background shows up as a white box?? I need a fix for this please.
Here is my url: www.ThanksSanta.org

Hello,
We might have to look into your .muse file to have a better look into the issue.
I tried it on a sample file but it worked fine for me.
Could you please e-mail your .muse file on [email protected] You can use Adobe SendNow service (https://sendnow.acrobat.com/) to send your file in case it is larger than 20MB.
Please do not forget to mention the link to this forum in your e-mail.
Regards,
Sachin

Mapped Drive B:\ to a network share but does not show up in Windows Explorer.

I mapped drive B: to a network share but it does not show up in Windows explorer. I can go to the drive by typing b:\ but is not visible in explorer. But if I login as local admin it shows up in windows explorer. Any suggestions?

Hi Lloyd Reeves,
Based on my research, I would like to suggest the following:
Disconnect the mapped drive and map it again.
Ensure the user is using an administrator account; or change another user account to have a try.
Create a shortcut for a share folder and see if it will disappear.
In addition, it would be helpful for future troubleshooting if you could help to collect the following information:
Which method did you use to map drive?
Was there any error message in the Event log? If so, please provide the detailed information.
For your information, please refer to this similar case:
http://social.technet.microsoft.com/Forums/windows/en-US/6acab187-c46c-4ff9-8604-196c64ea8995/mapped-drives-not-visible-in-explorer-although-shown-in-map-network-drive?forum=w7itpronetworking
Regards,
Lany Zhang

Key figures with currency conversion showing weird values.

Hi Experts,
I have a variable screen,
User can key in Target Currency, and Month.
Say,
(Scenario 1) User keys in Target Currency "MYR", and Month "4"
The report will show
Jan| Feb| March| April| May| June| ...
2| 3| 5| 7| 0| 0| 0 ...
This is correct.
(Scenario 2) User keys in Target Currency "USD", and Month "4"
The report will show
Jan| Feb| March| April| May| June| ...
2| 3| 5| 7| 3| 5| 7 ...
This is wrong, should not show figures for month May and onwards.
(Scenario 3) User keys in Target Currency "SGD", and Month "4"
The report will show
Jan| Feb| March| April| May| June| ...
1| 2| 3| 4| 0| 0| 0 ...
This is correct.
*In the infoprovider, the key figure is tied to currency "MYR".
In developement system, i replicated the exchange rate table, and the problem (Scenario 2) is solved.
In test system, i replicated the exchange rate table, and the problem (Scenario 2) is still there.
I am not sure what is happening here.
Please could you please kindly advise.
Thanks.
Tee

There appear to be two factors happening here.. one is how you have your query restrictions set up, and the other is the currency translation method that you are using. What results a currency translation provides depends on both the translation key definition AND the availability of a valid currency translation for the appropriate period.
First, review transaction RSCUR and see how your currency translation is defined.
Then review transaction oB08 and see if there is a valid currency conversion factor during the affected time.
Once you're certain all that is correct, review your query and how it is functioning. The fact that you wish to display months for which you do not wish to return data seems to indicate your 0CALMONTH2 restriction is not set up properly.

Key figure values in MC$K not updated

Hi
I have a situation where I run transaction MC$K (Material Analysis: On-time delivery: statistics):
At first I had not done any config in transaction MCFC for the deviation of delivery date. So when I ran MC$K, the delivery date variance key figures showed zero (0).
Then I updated the variance intervals in transaction MCFC and reran the report. Still did not show anything for the old purchase orders, but for any new created PO/GR that that I did after my settings in transaction MCFC are taken into account.
But what if I want to see anything that was created before I did my MCFC config? For the old purchase orders that is...is there any update program I need to run for the info structure?
I am a bit new to this so please bare with me...

Hi,
Problem has been resolved by passing the 40 char length material, and location in the char combo table of BAPI.
Ex: CHARACTERISTIC_VALUE = 00000000000000000000000000000000000100600 (Should be 40 char).
CHAR_COMB_ID = 1 -
you can give any number.
Now i am facing another problem with this BAPI.......
In our planning book time periods like first two weeks in day buckets, after thet all in week buckets.
Case1: day buckts - noprob
case2: weekly buckets : suppose a week start from 17/01/2010 end with 23/01/2010. In this case i am not able to create a order on 22/01/2010.
BAPI allowing the time period start date as 17/01/2011 and end date as 23/01/2011 and its creating the oder on 20/01/2010(middle day of the week).
Can anybody suggest on this..
Thanks

Help with Planning Query - 0CALMONTH not showing up

Hi, I have a simple planning query where I am trying to allow users to input or change an Amount by Material/Month. The User inputs a Version and a Date Range to maintain. The selected dates should show up going across the screen even if there is no existing data. These Variables are in the Query Filter along with a few other characteristic Filters. So in my query I have 0MATERIAL in the Rows and I have 0CALMONTH and my Key Figure. Under advanced for the characteristic 0CALMONTH it is set as Master Data.
When I run the query for some reason the 0CALMONTHS do not show up going across. If I run the query and put in one value then the 12 months show up. Seems like a bug. I have another similar query where this works. Can anyone take a look at the screen shots and help me figure this out?
[Query Def Screen 1|http://i35.tinypic.com/1h8con.png]
[Query Def Screen 2|http://i36.tinypic.com/1f781c.png]
[0MATERIAL Def|http://i36.tinypic.com/xefq8i.png]
[0CALMONTH Def|http://i35.tinypic.com/ej8qpv.png]
Thanks!
Edited by: Kenneth Murray on Nov 5, 2009 3:12 PM

Dear Kenneth,
I think its a bug. If we post the value without the drilldown on 0CALMONTh then its open for the input, and after that if we drill down it with 0CALMONTH for same selection, it opens for input. but for new selection of month it not opens.
Have you solved the problem?
Regards,
V B Udani

Key figures with Heirarchy in Bexquery not showing up in Snapshot/ Explorer

Similar Messages

Maybe you are looking for