Key Figures With Hide can be shown showing wrong values when displayed in a query

Hi Experts,
I have a qiery with two structures in the column(cell Definition) three key figures are displayed and the rest are all hide can be displayed. However whenever i display one of the hidden key figures along with one displayed key figures it initially shoes incorrect values. Once i add another key figure (which has status always show) the hidden jey figure value gets corrected. Is it a problem with the structure? Kindly assist.For example  when i display the actuals(always show) and actuals rate(hide can be shown) the values for actuals rate are wrong , however when i add the plan rate(always ahow) the values for actual rate gets corrected. Screenshots for structures below.

Hi Sayanto,
For this I would recommend you to check the Key figure definition in all 3 situations.
1. original display
2. display of hidden KF
3. Display of existing KF
I suspect that cell references may have some effect on the calculation as you are adding the hidden KF in analyzer directly. You can prove this only by checking  Key figure definition.
Please let me know if you are facing any issue in getting the Key figure definition itself.
Also, as Cornelia suggested check if you have any constant selection applied to any of your KFs.
Hope this helps.
-Swati.

Similar Messages

  • Key figures with Heirarchy in Bexquery not showing up in Snapshot/ Explorer

    Hi,
    I am taking a snapshot of a multiprovider in Explorer using T-code RSDDV.
    In the related bex query I have a few calculated Key figure which I want to get it into the explorer tab / Key- figures. The idea here is to use these as measures within the Explorer portal.
    The problem I am running into is if any of these key figures use Hierarchies I am not able to bring it in but without the hierarchies I have no issue.
    Has someone come across this?
    If you need more clarification please feel free to ask.
    Thanks
    bob

    You have a beautiful example in the Oracle By Example Series here :
    http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_admin/biadmin.html#t2s7
    If you follow the instruction on the Channels Detail_Key in this example, you will succeed
    Success
    Nico

  • Facing problem in display of  measure with property "hide can be shown"

    Hi Experts,
    Am facing a strange problem in BEx Analyzer. I have used a global structure with formulaes & Selections. For few formules i have used Display option as "hide can be shown".
    when i open the report in Analyzer and perform drilldown on line items "with hide can be shown" say line items X.
    i cannot see this X line items in result set area.
    I tried checking all properties, but could not find the root cause.
    Can anyone please help me in this problem.
    regards
    Jasmine

    Hi,
    I order the display the missing key figures - you need to e.g. right click on Key Figures in the Filter section and press Select filter values. Here you should be able to add you missing key figures to the selection. You can also just right click Key figures in the filter section and click Remove filter.
    Best regards,
    Jacob

  • Query variable shows up even when "Hide (Can Be Shown)" is checked

    BW gurus,
    When we run a BEX report, a variable needs to be input with value, but when we check the variable property in the BEX design, find under Hide list, there are three list values:
    1. Always show
    2. Hide (Can Be Shown)
    3. Always hide
    The 2nd one "Hide (Can Be Shown)" is selected for this variable display feature.  It seems that this variable should be hidden for option 2, but why this variable shows up when running the query. When we edit this variable, find the "Ready for input" is checked, that's the reason for it?
    Thanks

    Hi Kevin,
    When we edit this variable, find the "Ready for input" is checked, that's the reason for it?
    Yes, that's why it is showing, but I also do not understand what you are trying to do.
    kr,
    Tom

  • Can not Sorting by Key Figure with Analyzer and Excel 2007

    Hello experts,
    We have recently changed to Office 2007, and the funcionality of Sorting by a Key Figure with BEx Analyzer is desactivated.
    We have applied the patch 10 for BEx  BI 7.10.
    Has anybody had the same problem?
    Thanks in advanced.

    Hi Patricia,
    Have you got two structures in your query?
    Please take a look at the following notes:
    1378796 - Disabled Sorting when there is one struct. in the drilldown
    1332267 - BExAnalyzer: changes in cell properties dialog / sorting
    these should explain why the sort feature is no longer available in certain scenarios.
    many thanks
    Orla.

  • No values when using key figure with constant selection?

    Hi experts,
    I have built a Webi on top of a universe that is sitting on top of a Bex query.
    In my Bex query I have a bunch of key figures defined that are restricted on time and category.
    This Webi works fine.
    Then I added an additional key figure that required a constant selection on time and on category.
    When I first added this to my Webi report it was fine. But once I refreshed my report showed no values.
    The report still seems to know that it is meant to retrieve values because it is bringing back the correct records - just no values. (ie I am showing time in my columns and it's showing the correct periods that are meant to have data)
    I refreshed a number of times and sometimes it would bring "#TOREFRESH" in some cells but once I refreshed again the cells are blank. Sometimes it would even show me a value in a couple of cells and others would show the "#TOREFRESH"
    I went back to my Bex query and removed the key figure with constant selection and the report is working again?
    Has anyone experienced something similar? Is there a way to make this work?
    Thank you!
    Sabine

    #TOREFRESH error message appears for smart measures (measure object with aggregation type Database Delegated) when the context for the measure is changed. Refreshing data will solve the issue. Database delegated measures are used for some non-additive aggregation which webi is not able to handle properly. If you are not using such aggregation, then tou can change the aggregation type to something other than database delegated to avoid #TOREFRESH.

  • Combine two reports in query designer using key figure with sap exit

    Hi experts,
    i want to combine two reports in query designer using key figure with sap exit
    in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
    to calculate due and not due in two columns
    in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
    to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
    now i have requirement like this
    not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
    or
    not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
    thank you

    Hi Dirk,
    you perhaps know my requirement,
    for the management to make used in one report,
    we have in reporting finacials Ehp3.
    Vendor Due Date Analysis - which show due, not due
    Vendor Overdue Analysis - show only due and analysis in time grid frame
    i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
    krish...

  • Add new key figure with characteristics in report painter

    Hi expert,
    I am create a new report painter in GRR2 under report group 8A2 (EC-PCA: Standard Reports) and i would like to create a report show on G/L amount with segment.
    When i click on first column to assign "key figure with characteristics" i am not able to find characteristics "segment".
    Please kindly advice how to create in new characteristics in report painter?
    Thanks.
    p/s : profit center number is same with segment number
    regards,
    ng chong chuan

    Hi,
    "segment" is not a characteristic of classical profit-center accounting (libraries 8A*). Its a New GL characteristic, thus create a report painter report for New GL library.
    best regards, Christian

  • Key figure with pre-calculated aggregation

    Hello,
    I have to model a key figure with a pre-calculated aggregation, that is, soruce flat files contain explicit values for months, quarters, halfyears and years. The key figure is a percentage (service quality) and the corresponding company department provides me with results for all aggregation levels.
    I think that this case can be modeled with one InfoCube for each aggregation level and a Multicube but I have to create a high number of InfoCubes (aprox. 180).
    I can get the formula that department uses, but it's possible on BW to change standard aggregation (SUM, MAX, MIN)?
    Thanks in advance and regards,
    Alberto Garcia.

    Hi Alberto,
    One of the ways of doing it could be -
    add another field (char) to your cube called at "value Type" & assign different values to it depending upon the time value.
    say Monthly  - value type 1
        Querter  - value type 2
    & so on ...
    keep filling the same key figure.
    at the time of reporting restrict your key figure accordingly with the value type. ( say need only montly key figure value restrict value type to "1")
    hope it helps.
    VC

  • Impact of Hide (Can be Shown) in Query

    Hi Friends,
    Whats the Impact of  Hide (Can be shown) function which is available for the Keyfigure Properties in the Query Designer?
    Thanks in Advance
    Chandu

    Hi Chandu,
    This means that this KF is not shown when the query is executed, but if the user want to see this, then they can go to the local change mode, or click on Filter for the KF structure and bring this 'hidden' KF into the query. Just something like the free chars in your report, not present in the results, but available.
    Hope this helps...

  • IPad- on Yahoo pages the mail icon with the red number indication shows email.  When I tap, it asks me to sign in again. I do. It takes me to yahoo mail but there is nothing.  All the folders are emptied. All mail is either read, trash, or deleted.

    iPad- on all Yahoo pages the mail icon with the red number indication shows email.  When I tap, it asks me to sign in again. I do. It takes me to yahoo mail but there is nothing.  All the folders are emptied. All my mail is either read, trash, or deleted. Also, when I tap on the mail app on iPad home page, gmail is no problem but for yahoo I get error: no password for yahoo. Go to Mail Account Settings and enter password.  I'm stuck. Suggestions?  Thank you.

    Ask and you shell receive.....lol
    Go to your Gmail account in the browser.
    Hit the folder icon that brings up the folder selection.
    Scroll down to the bottom and select desktop version.
    The broswer will refresh and bring up your gmail account as though you were looking on it on the computer.
    The go to the upper right corner and select settings.
    Then go to forwarding and pop/imap
    Go look at pop download
    There you'll find 3 numbered lines
    Go to 1. Status
    And select enable pop for all mail
    Then save the settings
    Once you have done that you can go back to BlackBerry device settings and sync your mail or wait for it to sync it's self.
    Let me know how it works out.
    I just did it and it sync within minutes.

  • Updated CODE1 is showing wrong values in 2LIS_05_QE1

    Hi all,
    I'm using 2LIS_05_QE1 extractor to report over qualitative data in BW. When the code of the characteristics is updated, the extractor takes 2 records, before and after images. The extractor is gathering wrong values for the CODE1 field  in the before image.
    REQUEST     DATAPAKID     RECORD     ROCANCEL     PPLNKN     MERKNR     CODE1     GRUPPE1     ZHLNSTAT
    REQU_4KVR0APSV0RSZ7N70IOR0F95L     1     5120          5     40     0     CIBAU038     1
    REQU_4KPIA4UG5G1IKN6DE3XFWKIS9             3     4045     X     5     40     0     CIBAU038     -1
    REQU_4KPIA4UG5G1IKN6DE3XFWKIS9             3     4046          5     40     75     CIBAU038     1
    REQU_4KYF8YNIEMXNZI7P2Y5BM21W9     3     4045     X     5     40     0     CIBAU038     -1
    REQU_4KYF8YNIEMXNZI7P2Y5BM21W9     3     4046          5     40     75     CIBAU038     1
    We have changed the characteristic two times, now we can see two of the before images with the ROCANCEL field marked with = 'X'. The problem appears in the second before image which is not taking the actual value of the CODE1 field (75), instead is showing the value in zero. Then, when I report over the key figure in the table above ZHLNSTAT (quantity of values) the results are showing 2 values for CODE1=75 and -1 values for CODE1=0.
    Any ideas?

    I have checked Datasource and CODE1 is not a hidden field...apart from this field there are other fields too which I can see in Datasource in R/3 about dont see them in BW ....
    Please let me know what could be wrong.
    Thanks,
    Murtuza.
    Edited by: Murtuza Morwala on Jun 27, 2009 7:36 AM

  • Standard program showing wrong values in ALV report

    Hi All,
    Standard Report 'RFBILA00' (Balance sheet P+L Statement) ,when i excute for classical list the output showing correct.
    But with the same test data when i run for ALV Grid control showing wrong valuse like.
    with same company code comparision year,comparision period ,comp periods...when i run classical list:
    PROFIT/LOSS BEFORE TAXATION                                 5,194,871.12-
    RETAINED PROFIT/LOSS FOR THE PERIOD                    5,194,871.12-
    NET PROFIT/(LOSS)                                                        5,194,871.12.
    when i run in ALV for same above data, the result is:
    PROFIT/LOSS BEFORE TAXATION                           9,307,137.09
    RETAINED PROFIT/LOSS FOR THE PERIOD              5,194,871.12-
    NET PROFIT/(LOSS)                                                 22,076,715.82.
    Please help on this....and this is standard report.. y its showing different for same data.
    Thank you
    Anu.

    Hi ,
    Same program  excuted once by selecting classical list is showing correct. And with same data excuted with ALV grid list showing wrong valuse.
    when selected with Classical list: for company code:8000,Reporting periods: 1-9,Reporting year:2009,Comparison periods:1-8
    Comparison year-2009.
    PROFIT/LOSS BEFORE TAXATION 5,194,871.12-
    RETAINED PROFIT/LOSS FOR THE PERIOD 5,194,871.12-
    NET PROFIT/(LOSS) 5,194,871.12.
    when i run in ALV for same above data, the result is: for company code:8000,Reporting periods: 1-9,Reporting year:2009,Comparison periods:1-8 Comparison year-2009.
    PROFIT/LOSS BEFORE TAXATION 9,307,137.09
    RETAINED PROFIT/LOSS FOR THE PERIOD 5,194,871.12-
    NET PROFIT/(LOSS) 22,076,715.82.
    Thank You,
    Anu.

  • Issue: - FBL1N - is showing wrong values

    Issue: - FBL1N - is showing wrong values    
    Hi SAP experts,
    We are executing T Code FBL1N and selecting all open enteries, and select all items like special normal items, G/L Transaction, noted items, parked items and customer items, we found that the balance is showing wrong for intercompany vendors.
    For Ex, if vendor is not created in company Code A and customer items are available in Company Code A then that items are coming for some line items and for some line items it is not?
    I have attached one example for the same. for all vendors data is coming properly but for indivisual vendor is it not.
    Please suggest why?
    Regards,
    Vijay

    Example :
    Vendor number 99 ans for the same  customer nO is C12 is created in company code ABC but vendor is not created and customer C12 is in PQR, now i am executing fbl1n for Company Code PQR for open item selecting all options like normal items, special G/L transaction, customer items  noted items and parked items, the line items related to Vendor number 99 for company Code PQR should not display, as vendor is not created but customer items are there, please let me know for some cases it is showing result and in same cases it is not why?
    Regards,
    Vijay

  • Key figures with currency conversion showing weird values.

    Hi Experts,
    I have a variable screen,
    User can key in Target Currency, and Month.
    Say,
    (Scenario 1) User keys in Target Currency "MYR", and Month "4"
    The report will show
    Jan| Feb| March| April| May| June| ...
    2| 3| 5| 7| 0| 0| 0 ...
    This is correct.
    (Scenario 2) User keys in Target Currency "USD", and Month "4"
    The report will show
    Jan| Feb| March| April| May| June| ...
    2| 3| 5| 7| 3| 5| 7 ...
    This is wrong, should not show figures for month May and onwards.
    (Scenario 3) User keys in Target Currency "SGD", and Month "4"
    The report will show
    Jan| Feb| March| April| May| June| ...
    1| 2| 3| 4| 0| 0| 0 ...
    This is correct.
    *In the infoprovider, the key figure is tied to currency "MYR".
    In developement system, i replicated the exchange rate table, and the problem (Scenario 2) is solved.
    In test system, i replicated the exchange rate table, and the problem (Scenario 2) is still there.
    I am not sure what is happening here.
    Please could you please kindly advise.
    Thanks.
    Tee

    There appear to be two factors happening here.. one is how you have your query restrictions set up, and the other is the currency translation method that you are using. What results a currency translation provides depends on both the translation key definition AND the availability of a valid currency translation for the appropriate period.
    First, review transaction RSCUR and see how your currency translation is defined.
    Then review transaction oB08 and see if there is a valid currency conversion factor during the affected time.
    Once you're certain all that is correct, review your query and how it is functioning. The fact that you wish to display months for which you do not wish to return data seems to indicate your 0CALMONTH2 restriction is not set up properly.

Maybe you are looking for