Key Flexfields - to change the max size of an existing segment

Refer to the Oracle Applications Flexfields Guide ( Chapter 4), it was advised not to amend the maximum size of any existing value set especially if they are right-justify and zero-fill.
In our case, we must change one of the segment from existing 5 chars to 6 chars and this is an accounting Flexfield ( all segments are right justified zero fill.
What is the solution how to tackle this ?
Any suggestions or experience on similar requirements ?

Hi George,
dbxml_dump seems to work fine, but ends with this message:
DATA=END
dbxml_dump: Non-replication DB_ENV handle attempting to modify a replicated environment
dbxml_dump: dump <container name>.dbxml: Error: Unexpected error opening Configuration DB
dbxml_load more or less has the same error...
I am currently writing a little Java program that simply dumps all XML documents of all containers in a directory structure...
That would work as long as the file system can handle it...
I suppose dbxml_dump/load could be made to work quite easily by just copying their sources and specifiying the replication settings...
All utilities that cause log activity, that currently do not support replicated environments, should support replicated environments that simply use the default replication transport mechanism. With some additional command line options like --sites it would work...
Regards,
Jacobus

Similar Messages

How do I change the paper size in an existing Pages document?

How do I change the paper size on an existing Pages document?

So are your text box set to floating? You can tell that by looking in the Inspector>Wrap Tab when you select the text box.
If I had to guess I would say that the text boxes are floating and when you change the size of paper the text that you have in the main body area is shrinking so that it does require as many pages and you are losing the text boxes at the end. Is that correct? If so, they are still there, you just have to add page breaks to get to the pages that you lost and you should see them again.

How can I change the page size in an existing layout?

I have an 8.5x11 layout that I need to change to 8x10 without starting over again… Help?

If you just need to change the size of the page, go to File > Document Setup
Check out the Layout Adjustment feature as well -- it will make things
that are close to margins cling to the margins if the doc is resized.
But if you want to simply scale the entire document and everything
that's in it to the new size, check out:
http://www.id-extras.com/products/quickresize

How to change the page size of a replicated container?

Hi, I would like to change the page size of dbxml 2.3.10.10 containers in a replicated environment.
This is what I tried so far:
1) dbxml_dump/dbxml_load (bot utils not usable in a replicated environment)
2) db_dump/db_load. db_dump works fine. db_load seems to work fine, since it succesfully creates a database/container from a dump file. But it does not correctly initialise the internal dbxml structures since the database/container can not be opened, although getContainers works...
Besides writing my own dump/load clients, is there any other option to change the page size of an existing container?
Regards,
Jacobus Geluk

Hi George,
dbxml_dump seems to work fine, but ends with this message:
DATA=END
dbxml_dump: Non-replication DB_ENV handle attempting to modify a replicated environment
dbxml_dump: dump <container name>.dbxml: Error: Unexpected error opening Configuration DB
dbxml_load more or less has the same error...
I am currently writing a little Java program that simply dumps all XML documents of all containers in a directory structure...
That would work as long as the file system can handle it...
I suppose dbxml_dump/load could be made to work quite easily by just copying their sources and specifiying the replication settings...
All utilities that cause log activity, that currently do not support replicated environments, should support replicated environments that simply use the default replication transport mechanism. With some additional command line options like --sites it would work...
Regards,
Jacobus

All of my tools in PS 6 have a "cross" icon and I can't use them, like the clone tool. I have reset all tools to no avail. The bracket keys do not change the size. Any help?

All of my tools in PS 6 have a "cross" icon and I can't use them, like the clone tool. I have reset all tools to no avail. The bracket keys do not change the size. Any help?

Yep, I discovered that. Thank you very much for the prompt and accurate reply.

How do you change the default size of the print batch size for mail merge in Publisher 2010?

I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

How to change the maximum frame rate of the camera by changing the image size?

I have two acA2040-180km cameras which are connected to 2 NI PCIe-1433 framegrabbers, I am monitoring my cameras by LabView, maximum allowable frame rate is about 187 for full resolution images, but I just need a small fraction of the images, I know if I make the images smaller, FPS will get higher, but it isn't possible by changing the image size in NI MAX, I've also tried to change the size by defining the region of interest in the grab setup.vi, but it would be after going to camera so it isn't the case as well, so I need a VI to go to the camera before starting to take photo and define the region of interest which is going to be captured, would you please help me to find it?
Please help me, this problem get me stuck!!!

Have you tried changing the image size using property nodes as Bruce suggested? Do remember with Basler cameras, reducing the width only will not affect the transfer speed but the reducing the height will. Have a look at the frame calculator to understand what you frame rates you can acheive with certain settings:
Basler Frame Rate Calculator
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

How do you change the max data when creating a DVD?

I recently filmed a show and am making DVD copies. The show runs 1hour 45mins and is about 79gb in HD. I'm using compressor 4.1 to create the DVDs so it fits on one disc. I've made a few test copies but so far every DVD freezes at around 43 mins when I play it in another computer or dvd player. I heard in a blog that reducing the max data should solve the problem. This is my first time using compressor and I wanted to know where do you go to change the max data and how will that affect the video quality? Also, what is the suggested range of data limits for a project of this size?
Thanks

Duplicate the Create DVD preset from the Settings pane and name it.
Select the MPEG setting in the batch window.
Open the Inspector and click the Video tab.
Choose your "Encoding Mode" (CBR, etc.).
Uncheck Automatically Select Bit Rate.
You can then move the slider: somewhere around 4 Mb per second should be about right.
Just to add that you might also have a problem with the physical media. Try another brand to see whether that makes a difference.
Russ

Why does the mouse change the font size on my lap top?

When browsing on my lap top, I mistakenly change the font size with the integrated mouse on the computer. This is not a problem when using the external mouse. I notice that expolorer typically has the screen size displayed in the lower right hand corner. I need to know how to avoid this problem. Thanks!

If you press the Ctrl key while using the mouse wheel then you change the page zoom.
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Export/Import-SPSIte :- What is the max size limit that can be moved using this command??

Export/Import-SPSIte :- What is the max size that can be moved using this command??

I assume you ment Export-SPWeb not Export-SPSite command.
There is no known limitations in file size, except the compression file size that is set to 24MB by default. If you exceed 24MB, the cmp file will be splitted into several files. You can change the default 24MB value up to 1024MB, using the -compressionsize
parameter.

AD CS Web Enrollment Error - "public key does not meet the minimum size required"

I've installed a standalone root CA and a enterprise subordinate CA in our environment - both are Windows 2008 R2. Everything is working except for Web Enrollment using a custom User template. I duplicated the default User template and choose
2003 Compatible for the new one. I changed the minimum key length to 2048 and set the validity period to 2 years.
We'd like to avoid using the Advanced Certificate Request page, so I modified certrqtp.inc to point to the new template:
Else
' Request types for enterprise
rgAvailReqTypes(0,FIELD_TEMPLATE)="User-custom"
rgAvailReqTypes(0,FIELD_FRIENDLYNAME)=L_UserTemplateCert_Text
rgAvailReqTypes(0,FIELD_CSPLIST)="Microsoft Enhanced Cryptographic Provider v1.0?Microsoft Base Cryptographic Provider v1.0"
rgAvailReqTypes(0,FIELD_CSPLIST2)="Microsoft Base Cryptographic Provider v1.0?Microsoft Enhanced Cryptographic Provider v1.0"
rgAvailReqTypes(0,FIELD_EXPORTABLE)="True"
nAvailReqTypes=1
End If
I also ran into this issue where Web Enrollment jumps straight to the Advanced page if the original User template isn't present on the CA:
http://social.technet.microsoft.com/Forums/en/winserversecurity/thread/9ab514bc-1f9f-424e-b70d-705874d9c623
So I have both User templates loaded on the CA, and I get this error back when attempting a certificate request using IE 8 or 9:
Your certificate request was denied.
Your Request Id is 25. The disposition message is "Denied by Policy Module".
Contact your administrator for further information.
Looking at the CA's Failed Requests section, I see this error:
The public key does not meet the minimum size required by the specified certificate template. 0x80094811 (-2146875375)
I double-checked our custom template and it does specify 2048 as the minimum key size.
Also, when trying with Chrome 11.0, I get an extra option during enrollment asking for a key size (1024 or 2048). When I choose 2048, the certificate request succeeds. I don't get the key size option when using IE, though.
We'd like to get this working with IE if possible. Any ideas?

We had the same error message. The problem turned out to be on the requesting computer, not the server. When we went to renew a cert in IIS on a server it was generating a 1028-bit key request. Since the minimum on the server was set to 2048-bit
the request failed. So, there's two ways to handle this. You can change the certificate template on the server to have a minimum set to 1024-bit or you can have IIS submit a new request for a certificate and choose 2048-bit as the size of the key during the
wizard. We opted to have IIS request a 2048-bit key. The same would apply for whatever computer, device, or software you are using to form the certificate request.
Your message is pretty old, but I am running on the same problem right now. I've added a custom template to select (with 2048) minimum length, but the webpage from the IIS by default provides just 1024-bit. Where can i optimize the IIS to use a 2048-bit
key when requesting the certificate?
When I open the same site with Firefox for example, i got a listed option (Medium / High Strength) to choose for the encryption. It seems that the high strength is >= 2048-bit.

How can you change the display size on the task bar

how do you change the display size on the task bar

If, however, you want to change the size of the display of the menubar, meaning make the icons and text larger, there is no way to do that directly other than to change the resolution of the screen.
You can change the as-viewed size of that temporarily by using either -
• Mouse zoom - if you have a Magic Mouse (Apple wireless mouse), hold down the Control key and use the scroll up and scroll down finger gestures on the mouse.
• Zoom - go to System Preferences > Universal Access > Seeing and turn on Zoom. You can also use the noted keyboard shortcut to enable/disable this Zoom feature.

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

How do you can change the page size of a pdf in MAC? I have multiple pdf documents of different sizes that I want to combine.

Help. How do I change the page size of a pdf in MAC? I have multiple pdf documents in varying sizes I would like to combine and print.

There's no real need to do that. A PDF can have pages of different sizes.
On Fri, Jun 6, 2014 at 4:11 AM, christine rambo <[email protected]>

How to change the logo size on all the pages?

I have some 125 pages and i need to change the logo size of every page .Is there any method to change with one click that reflects on all the other pages ? Rather than i do it manually open every page and change the logo size? The logo is in the div. I want to use it as html rather than using as css div background image. Any help will be highly appreciated am using DWCS6 on win xp pro.

If the code is the same on every page, you could use the Find & Replace function within DW...
1. Make a backup of your site files, just in case
2. Make the necessary changes to one page to get what you want (make sure you know what the original code for it was/is)
3. Hit Ctrl + F to open the Find/Replace Dialogue
4. For "Find In" choose Entire Current Local Site
5. In "Search" choose Source Code
6. For "Find" put the line(s) of code that contain your background image on all pages (the original code mentioned in #2 above)
7. For "Replace" put in the newly changed line(s) of code from step 2.
8. Hit Replace All
DW will go through all of the pages, replacing whatever code you put in Find with whatever code you put in Replace.

Key Flexfields - to change the max size of an existing segment

Similar Messages

Maybe you are looking for