Key help trigger not displaying help file

We're using designer 2.0.24.2.0 with headstart 5.0.2, I've created a number of help files for different modules, when you run one of the forms and press the help key, the help file is displayed. If you do it a second time, the help file is not displayed, if you use the ? off the toolbar the help file is displayed.
I've had a quick look at the core library and there is a package body QMS$HELP which was modified on, with the comments :-
05-10-1998 S. Davelaar chk_help_mode, invoke_context_help,
context_help_invoked
Added boolean to keep track of context help invocation. This to prevent, online
help is invoked three times in a row: by item-level, block-level and form-level
trigger (trigger execution style is BEFORE!!).
I've checked the key-help triggers at Item, Block and Form level, they are all set execution style before and these triggers are firing each time the help key is pressed.
Is this a known bug which has been fixed in a later release? Or does anyone know of a quick fix?

This was identified as bug #850317 and was resolved in Headstart 5.0.3.2.

Similar Messages

ITunes No Longer Runs--iTunes Helper Resources Not a Valid File Name

I made a dumb mistake (I think) and tried to install iTunes onto an SD card. At first, my computer would only let me open iTunes if the SD card was installed. I tried to reinstall to the C drive, but keep getting the "I Tunes Helper Resources not a Valid File Name" message. At this point I want to uninstall everything and start over, but I'm afraid I'll lose my music. I still have all the files but, of course, none will open since I don't have a properly installed iTunes anymore. Would appreciate any assistance in uninstalling, reinstalling and saving my current music files.

Here's what I decided to do. Fortunately, all the files were still available, so I simply backed them up from my iTunes Music Library onto a 32 GB flash drive then transferred the new stuff onto an older computer in my office with an older version of iTunes. I had to do this in several shifts since I have more than 32GB of music. Everything that transferred plays well. Next I'll try to wipe iTunes completely off the new computer, reinstall an older version of iTunes and then reload all the files onto the new computer. What a PITA!

F1 help is not displaying documentation

Hi ,
Can anybody help me why the F1 help is not displaying any documentation window.
Regards,
amar

Hi,
In SAP Easy Access screen OR in any SAP screen,
Click on following Menu;
Help > Settings > Under F1 Help Tab > Select Radio button in modal dialog box (R/3) and click on "Enter" button just after selecting it w/o clicking anywhere else.
And then try.

Ship to party search help address not display

Hi,
Using 'Edit internal address' We added one plant address, and the address no also generated. plant having several address.
But when we creating shopping cart, trying to select the ship to address from the search help, address not displaying in the list.
even we tried adding this address in the attributes as delivary address also .but the address not displaying in ship to party search help.
If any one faced this problem let us know how to proceed.
Thanks in advance,
prasad.s

it is strange .
whatever you have defaulted ship to adress has to come.
did you maintain at position level and make ensure that you have really inherited.
FM bbp_read_attributes
for your user execute and make ensure that you have inheited ship to address
when you create ship to address . did you check this box Ship-to Address in Use Address as:
muthu

Bridge CS4 Search Not Displaying NEF Files + Keyword Problems

Hello, I am hoping someone can be of service to peculiar problem that apparently nobody else has had.
I am running Adobe Bridge CS4 (came bundled with Photoshop Elements 8) on a 2009 24 inch iMac with 4GB RAM and a 2.6mHz processor running Snow Leopard v10.6.2.
I use Adobe Bridge CS4 to add Keywords to all my photos and edit 14 bit Nikon NEF RAW files. I write the keywords to an .XMP sidecar
file.
Two days I ago I changed something in Preferences->Metadata and the next time I started Bridge CS4 and used the loupe tool on a NEF
file, it took longer than usual for the preview to come up and when it did, it was at 200% magnification instead of 100%. Once the loupe preview showed up, the NEF file had some sort of processing applied to it (it became more contrasted.) This was all within Bridge ant NOT Adobe Camera Raw. I quit the program and the next time I started Bridge, it crashed upon using the loupe tool. I looked up help on Adobe's website and it appeared I had corrupted preferences. Per Adobe's instructions I option clicked at Bridge startup to delete the preferences and purge the cache.
Everything appeared to be normal until today when I searched for a keyword and got 36 random results when I know I have hundreds of
photos tagged with that particular keyword. I started typing in other keywords and getting the same sort of results- very limited numbers of photos I have hundreds of. I always include all subfolders in all searches and used every search method available through Bridge to no avail. The searches always came up with a fraction of the photos I actually have tagged.
I then verified and repaired all disk permissions from the operating system installation CD and Bridge started returning results as
usual. However, when I clicked on an individual file in the Content pane, some of my Keywords started to appear in italics below the rest of my Keyword tree. There doesn't appear to be any rhyme or reason as to why some images will return the Keywords normally and others in italics. Also, sometime the italicized keyword tree will include keywords I edited due to typos and thus no longer existing my normal Keyword tree. I gave the "Make Persistent" command a try. It converts the italics to regular case, but it also doubles the tag so I now have two of that tag (one in the normal keyword tree, and the now converted italics keyword tree.)
Now I'm noticing that all my search results are not including NEF files; just JPEG and the occasional DNG file that I made through Adobe Camera RAW. I'm not sure if this has been the case throughout my problem or if I just noticed it late.
Regarding not displaying NEF files in searches, it appears that it will default to displaying JPEG if it has the option because as of lately I have only been shooting RAW and some of those files are showing up in the still-wonky searches (still displaying random or no photos of keywords.) However, if I manually navigate to a file, I can open and edit NEF files with no problem, they just don't display in any search modes.
Here's two short videos of what happens when I navigate a folder with NEF files by manually searching:
http://www.youtube.com/watch?v=WDjUDZzULKQ
http://www.youtube.com/watch?v=-Y9HkDK7DCs
When I click on a NEF file, the one ahead of it in Content view processes into a more contrasty image and the loupe tool previews jump between 100% and 400% and then change to 100% when dragged or they just process themselves right then and there.

I am running Adobe Bridge CS4 (came bundled with Photoshop Elements 8) on a 2009 24 inch iMac with 4GB RAM and a 2.6mHz processor running Snow Leopard v10.6.2.
Snow Leopard and Bridge CS4 do have some issues. Some have no problems and others have much problems I'm afraid.
I use Adobe Bridge CS4 to add Keywords to all my photos and edit 14 bit Nikon NEF RAW files. I write the keywords to an .XMP sidecar file.
To my knowledge the keywords are written into the XMP Metadata that is saved in the IPTC section of file itself, the XMP data in the sidecar file contain the changes you made in ACR. In other words, the keywords you have added should still be there.
Also see this Knowledge Base article about Keywords:
http://kb2.adobe.com/cps/402/kb402660.html
Two days I ago I changed something in Preferences->Metadata and the next time I started Bridge CS4 and used the loupe tool on a NEF file, it took longer than usual for the preview to come up and when it did, it was at 200% magnification instead of 100%.
Changes metadata in prefs only affects the visability of the fields in the metadata panel. put or deselect a checkmark in front of an option will let you see or not see the field in this panel, the actual data and fields ar still in the file.
it was at 200% magnification instead of 100%. Once the loupe preview showed up, the NEF file had some sort of processing applied to it (it became more contrasted.) This was all within Bridge ant NOT Adobe Camera Raw.
You can change the magnification for the loupe to 100 / 200 / 400 and 800 % using the scrollwheel or with loupe active the + and - keys. Bridge shows the settings that you made in ACR. If you have changed the default Camera Raw setting it will also change the thumbs for this file. A thumbs needs some time to be cached. First it shows with a black border around, when first cached it shows the embedded preview and in the second round it renders the ACR settings and High Quality preview (if you have not disabled this setting). Caching needs some time.
Everything appeared to be normal until today when I searched for a keyword and got 36 random results when I know I have hundreds of photos tagged with that particular keyword. I started typing in other keywords and getting the same sort of results- very limited numbers of photos I have hundreds of. I always include all subfolders in all searches and used every search method available through Bridge to no avail. The searches always came up with a fraction of the photos I actually have tagged.
Maybe you need to let the indexing in find do its work again but it might also be a snow leopard issue. Try an other app (Digital Asset Management like Expresion Media or Portfolio) to check about the keywording and find. You can use a trial version for several days. You have several options to use find keywords. In the panel itself, in the filterpanel uner the keyword tab, when clicking on a visible keyword it only shows the files with that keyword or in the menu Edit / find (shortcut cmd + F) explore the options in this menu and also choose include non indexed and let Bridge start to index your files again.
However, when I clicked on an individual file in the Content pane, some of my Keywords started to appear in italics below the rest of my Keyword tree. There doesn't appear to be any rhyme or reason as to why some images will return the Keywords normally and others in italics. Also, sometime the italicized keyword tree will include keywords I edited due to typos and thus no longer existing my normal Keyword tree. I gave the "Make Persistent" command a try. It converts the italics to regular case, but it also doubles the tag so I now have two of that tag (one in the normal keyword tree, and the now converted italics keyword tree.)
Don't know about that.
Here's two short videos of what happens when I navigate a folder with NEF files by manually searching:
http://www.youtube.com/watch?v=WDjUDZzULKQ
http://www.youtube.com/watch?v=-Y9HkDK7DCs
When I click on a NEF file, the one ahead of it in Content view processes into a more contrasty image and the loupe tool previews jump between 100% and 400% and then change to 100% when dragged or they just process themselves right then and there.
As you can see the black border around some file that disappear after a while or when you select them they have not been cached. You used purge cache so most of your earlier cached results are gone and need to rebuild.

Finder not displaying all files in remote directory

Sorry, this is a repost as I have gotten no response from my original request here: Finder not displaying all files in remote directory
I've exported pictures from iPhoto on my iMac to a shared directory on my mac mini. When I access that directory from my iMac, I can see some but not all of the pictures. I know the pictures exported properly because I can see them all from the mac mini. I can open up a terminal window on my iMac and see all of the files; I can also open those files from the terminal.
I'm running OSX 10.9.4 on both computers, with the mac mini also running OSX Server. I've placed a screen grab below from my iMac of what Finder sees vs what I can see from the terminal.
Why isn't Finder displaying all of my files?

thanks for responding
Adding a new file to the shared folder results in me being able to see the new file from my clients regardless of where it was added from, however the "hidden" files do not suddenly pop up.
I tried a few more experiments that had interesting results, but still didn't lead me to an answer.
First I tried copying the files from the remote directory to a local directory; I did this in 2 different ways and had different results. Method A) I copied files from the mounted share to a local dir: "cp /Volumes/MyShare/dir/*.JPG .". Method B) I copied the files using secure copy: "scp user@server:/path/to/dir/*.JPG .".
Method A resulted in Finder not being able to see the files in the local directory, while Method B did. This was interesting and lead me to suspect an issue with the way I am sharing the directory on the server. From Server settings I have both afp and smb checked. I tried enabling only one or the other and reconnecting; but this did not fix the problem.
Next I tried exporting the photos from iPhoto again. Exporting them locally results in files that Finder can see. Exporting them to my server results the same bad behavior
Getting desperate, I also tried renaming all of the files from "*.JPG" to "*.jpg" but this didn't help.
One last experiment, I see the same behavior from both another Mac and a PC on my local network... FTP works fine.
Any more ideas?

Safari will not display pdf files since installing OS 10.8.2

Safari will not display pdf files uner Lion 10.8.2

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Safari does not display PDF files?

My Safari browser does not display pdf files. Whenever a site I'm reading links to a pdf file, a new page open in black but without content.

Try this ...
Open a Finder window then from the menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go.
If you see the: AdobePDFViewer plugin in the Internet Plug-Ins folder, move it to the trash.
Restart your Mac and try opening a PDF file.

Bridge CC not displaying video files

Bridge CC not displaying video files - I just installed the new Bridge CC and I am unable to view and play my video files. The files are Quicktime files. The title of the file is displayed with a QT logo, yet no video is registered. Has any one else has had this issue or has any advice?

This is still not working for me as I've opened another question regarding this here: .mov thumbnails not showing up for Bridge CC on Mac OS X 10.10.2?
I can view my Quicktime .mov thumbnails in Bridge CS6 but not CC. I have all the latest Adobe CC and Mac OS X 10.10.2 and QT 10.4 updates. I've removed the media cache folder and purged my cache - every possible fix I've seen on the internets and still, no thumbnails for .mov files in Bridge CC. I've toggled the "Generate Monitor-Size Previews" and "Keep 100% Previews" to no avail. I'm working on an important video project for a client and this is the first video assignment I've worked on with CC and so far, it's not working out well.

Why does Safari 5.1.7 not display pdf files anymore?

Why does Safari 5.1.7 not display pdf files anymore? Please fix!

I have this problem too except I see the pdf but it does not print.

JFileChooser does not display Korean files

I have an application that uses JFileChooser to select some files. The application is bundled with English version of JRE 1.6.0_06. On Korean Windows 2003 the application displays files with filenames in Korean and allows them to be chosen. However on Korean Solaris 10, it does not even display the files? Anyone have an idea on why there is this discrepancy?
I assume that the file with the Korean filename created on Korean Windows 2003 got created with the MS949 encoding for the filename. Similarly I assumed that the file with the Korean filename created on Korean Solaris 10 got created with UTF-8 encoding because that's the encoding set on Korean Solaris when I log in (its not set to EUC-KR). So how do I get the files to display and allow to be chosen on Korean Solaris?
Thanks,
Kartik
P. S. I have the same problem with filenames in Japanese - on a Japanese Windows 2003 server the JFileChooser displays the files while on a Japanese Solaris 10 box, the JFileChooser does not display the files.

Hi,
I am trying to pick up data from an excel sheet and insert them into a database. However, once updated, they end up with '?' values.
I have tried to make font.properties.ja as the default font.properties file, which failed to display Japanese characters.
Any suggestions?
This is a part of my code:
String sJIS = "";
sJIS = new String(cell1.getStringCellValue().getBytes("8859_1"), "JISAutoDetect");
String sUTF = "";
sUTF = new String(cell1.getStringCellValue().getBytes(), "UTF-16");
System.out.println("sUTF" + sUTF + " " + "sJIS" + sJIS);
Thanks,

Design View not displaying external files...HELP!

This is my second attempt asking for anybody's help. I'm using Dreamweaver 8.0.2 (OS X 10.4.11) and when I open "any" of my local files In "Design View" NO external files loads. Here's what I've done so far to no avail:
Delete "site cache"
Delete all pref files
Made sure "Display External Files" is check
Made sure "Style Rendering --> Display Files" is check (using screen media type)
Check that my firewall is disabled
Renamed local root DIR of site file
Searched the web, forums, etc...none of the answers worked
Reinstalled DW 8.....TWICE!
2 weeks ago I did updates to my website and everything was just fine. And now, nothing is working. All I can see is text and all of DIV blocks...but all external CSS and INC files fails to load. Been trying to fix this for 2 days now. Can anyone "please" give me some ideas to fix this problem.

Hi - without seeing the actual page code, I'll take a stab that possibly you've lost the link to your stylesheets...?
If you view the code, somewhere inside the "head" tags (generally right under the "Title", you should have a reference to any of your external stylesheets/images, etc.) Something like this:
<link href="name_of_stylesheet.css" rel="stylesheet" type="text/css" />
If no images are showing up as well, my guess is that you've moved the page (or the images and stylesheet) into a different folder/or subfolder without updating the links. Any time you move a file, it should be done within dreamweaver (and it will always ask if you want to update links). If you move a file without using DW, it will definitely break all links, and no amount of re-installing, re-caching, etc. will fix it (sorry)...
If this is the case, the best way to rectify would be to move the file back to where you had it... if this isn't the reason for the broken links, you'll need to manually re-update all of the links because something else has broken the linkage... (sorry again...)
Hope that helps,
Jesse

F1 Help Topic Not Displaying

We provide F1 help for almost every field in our application.
I converted our Winhelp project into .CHM file and used the .hh
file provided by the developer. The .chm file compiles just fine.
But the developer states that the F1 help does not show up for
certain fields.
Here is an example situation:
The .hh file contains:
IDH_BYR1NAM1
IDH_BYR1NAM2
The content for both help topics is identical, therefore
instead of creating 2 help topics, the .ali file contains the
following;
IDH_BYR1NAM1=html\IDH_BYR1NAM1.htm
IDH_BYR1NAM2=html\IDH_BYR1NAM1.htm
When we press F1 in the BYR1NAM2 field, the help topic for
BYR1NAM1 should show up but it doesn't. No help topic displays.
In the Map Id report I generated, the following was noted:
DH_BYR1NAM1
Map #: #80
Map file: C:\ENTERPRISE\HELP FIXES\PROFORM F1
HELP\HTMLHelp\pfsymtab.hh
Topic: html\IDH_BYR1NAM1.htm
(Map ID)
IDH_BYR1NAM2
Map #: #81
Map file: C:\ENTERPRISE\HELP FIXES\PROFORM F1
HELP\HTMLHelp\pfsymtab.hh
Topic: html\IDH_BYR1NAM1.htm
(Map ID)
I would greatly appreciate if someone can provide clues as to
why this is happening. Thanks in advance for your help!

in the report text, is this just a cut and paste error, or an
actual typo?
DH_BYR1NAM1 - should it be IDH_BYR1NAM1?
also - is ENTERPRISE a (gulp) NETWORK drive or your local
hard drive?

Help:Can not find the file in jar!

Hello everyone:
I build a project using Netbeans 5.0 and make a jar file with it...
The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
String dataFilePath = getClass().getResource(dataFile).getPath();
//System.out.println("filepath:"+dataFilePath);
InputStream input = new FileInputStream(dataFilePath);
when I run the project with the main() function as an entry it works perfectly and output:
filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
But when I compressed the project with jar and run it , it will show:
filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
there is a (!) between search.jar and /com/cn/wxjt...
I dont know why I generate a ! symbol in the file path... Is it cause the exception->
java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
If you have any idea, plz tell me.
Thank you and best wishes to you !
:)

If the file you want to read is in your jar file, use
getClass ().getResourceAsStream
(relative_path_file_name)Hope that help,
Jackhey jack i want to open the file as new File
i m using this.getClass().getResource("resource/backend.xml");
the resource is the directory inside the jar file.
when i prints the url it shows:
the jar file is in the WORK directory
URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
now when i creates new File using the url.getFile() method the file does not exist.
although the same programs runs well when i uses the InputStream
so plz tell me cant I create a new File from the above method????
thanks in advance
with regards
neeraj

Vendor Help is not Displaying in the Front end Screen

Hi,
Iam Working in SRM 5.0, Extended Classic Scenario.
I have Replicated all the Vendors & Materials from ECC to SRM. While Iam trying to create SC, if i select the Preferred Vendor Search Help iam getting the vendor Pop Up Screen in that i have all the vendors which got replicated from the ECC to SRM. If i select a vendor which is related to the same Purchasing Org. its not coming into my Input box, but an error msg is displaying saying that.. "No vendor assigned" & "No vendors/contracts/info records exist". Can any one help me in this, its very urgent.
Points will be Rewarded.
Iam giving my personal E-mail id, u can send some of the docs which is related to this Issue.
[email protected]
Thanks
Girish.

Hi Girish,
Apply this note and it should fix your problem:
<b>Note 845883 - Preferred vendor search help does not retrieve values</b>
Pls assign points for usefull answers !
Sundeep

Key help trigger not displaying help file

Similar Messages

Maybe you are looking for