Key icon in Application collection (Nokia C3-00)

Some apps are marked with a key icon in the Collections list. What does it mean?
Nokia Lumia 520 3046.0000.1329.2001 RM-914
Nokia Asha 302 V15.09 22-05-13 RM-813

Thanks so much . Ok so this is what i did:
I have one signed app:
1. I first Downloaded through OTA (from the internet): result: I see the key icon on it
2. I then deleted the installaiton and installed the same app through the cable: Result: This time there is no key icon!!!?
So whats the deal with the phone? Does it selectively add the key icon as it wishes

Similar Messages

5800: apps missing / won't run / "key icon" overla...

A few apps went missing on my 5800, also under Application manager. They're on the SD, and I think all Java. Some apps also started showing a small key icon overlayed at the corner of each app's icon. These apps can't be run.
A restart didn't help, nor a restart without the card and a live reinsertion. After another restart the key icon overlays disappeared but these apps still won't run. They could only be reinstalled after an uninstall, but those that disappeared are stuck in limbo.
Besides the above, one app that was preloaded on the card now has an empty icon, and after two restarts its name shows as a 9 digit number (see below). It can't be run.
All of this on firmware v31. As far as I can tell I didn't do anything to trigger it.
Are there any non-destructive ways to fix it?
Is there a way to use Symbian without all these strange problems popping up all the time (with the usual solution seemingly being total reset/format)?

ur symptoms lead to a diagnosis of corrupt memory card.. Have u installed any of those java programs from free game sites tht, while installin, says ur phone could be harmed? Coz those java games r a bit unstable on nokia5800.. I knw it shouldn't be.. But... It is.. Sometimes there's a read/write error and then they show key icons..
Whatever to solve this, do this..
Connect with computer
When asked choose mass storage mode
Open my computer
U'l find ur memory card listed
Right click, goto properties
There's an option for check disc for errors
Select tht and let it scan and fix errors
After u r done, see if u can uninstall those in limbo.
If not connect again in mass storage mode
Go to ur computer settings and as to show hidden files, and also show important windows files
Open ur memory card
U'l find a FOUND.000 folder.. Delete it
It's unusable by symbian os and it takes on space
Restore ur hidden file settings to normal.
Hope this helps..
Regards,
Dr. Shoubhik

Make applications for Nokia 5310!

Hi!
I would like to know how to program an application for Nokia 5310. Get me right, you are not here to teach me syntax I just want to know what kind of application, for my computer, I need (to make functional jars) and where I can download this stuff.
Yours sincerly,
Josef.

I have no idea what you are saying, I can get apps on my L800 without any problem and new apps become available almost daily.
Also currently available apps get updated frequently for me so it is unclear to me what it is you are trying to say.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Hi, I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, t

Hi,
I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, the only thing I can do is the force quit keyboard shortcut but there is nothing to quit, I have tried to start up in safe mode but again there is no icons in the desktop,
I have my disks that came with my laptop I have went into disk utility to repair disk and I still seem to have the same problem .. No icons or apps or anything lol just the cursor I can only shut down the laptop via power but and the press shut down.
Please help I am going out my mind with this thing :(
Thanks x jade

This can be used to boot the machine and delelte enough files to get it to boot normally.
.Create a data recovery/undelete external boot drive
Read about storage drive so you can store your extra stuff.
Most commonly used backup methods
Also here to see how a full boot drive slows the machine down
Why is my computer slow?

RA-20102: Application collection PLSQL_OBJECT_SOURCE does not exist

Hi,
I have written a trigger and it was working fine before in APEX. I have amended update statement inside the trigger and trying to compile. It was throwing me error as below and not being to save the trigger. Also i have taken out the update satement, it is not being compile. I have done many excercise that drop the trigger and re-create the trigger with new name, and same name. It gives me the same error.
RA-20102: Application collection PLSQL_OBJECT_SOURCE does not exist
I have no idea to move further. I have already search similar thread in this forum and tried their suggest. I have no luck to get compile.
Please help me.
Thank you,
- Thilip

Hi Scott,
Thanks for your help.
Currently am using APEX 3.1 and XE 10.2..0.1.0 DB.
Please find below is my actual trigger. This trigger is working fine without any issue
create or replace trigger "OPNS_STOCK_INBOUND_TRN_TRG"
BEFORE
insert on "OPNS_STOCK_INBOUND_TRN"
for each row
declare
l_open_stock number(13,3);
l_close_stock number(13,3);
l_trn_id number ;
l_max_id number ;
l_max_id1 number ;
begin
if inserting then
if :NEW.OUTBOUND_TRN_GAGES <> 0 then
-- Get the last record of ID in opns_stock_inbound_trn table
select nvl(max(trn_id),-1) into l_max_id from opns_mixing_inbound_trn;
select nvl(max(trn_id),-1) into l_max_id1 from opns_stock_inbound_trn;
-- There is no record, get -1 then Openning stock always zero
if l_max_id < 0 then
l_open_stock := 0;
else
-- Get the openning stock as previous record's closing stock
select nvl(close_stock,0) into l_open_stock from opns_mixing_inbound_trn where trn_id = l_max_id;
end if ;
-- There is no record, get -1 then Openning stock always zero
if l_max_id1 < 0 then
:NEW.open_stock := 0;
else
-- Get the openning stock as previous record's closing stock
select nvl(close_stock,0) into :NEW.open_stock from opns_stock_inbound_trn where trn_id = l_max_id1;
end if ;
-- calculate inbound gages for stock
l_close_stock := l_open_stock + :NEW.outbound_trn_gages ;
-- Deducting outgoing gages in open stock and update as close stock
:NEW.close_stock := :NEW.open_stock - :NEW.outbound_trn_gages ;
-- Get the trn_id from table to update the opns_mixing_inbound table
select max(trn_id) into l_trn_id from opns_mixing_inbound_trn;
:NEW.OUT_MIX_TRN_ID := l_trn_id ;
-- trn_id=1 for Inbound in overall
update opns_overall_trn set trn_date=:NEW.trn_date, open_stock=:NEW.open_stock,
close_stock=:NEW.close_stock, remarks='OPNS_STOCK_INBOUND_TRN_TRG', update_date=sysdate
where trn_id=1;
end if ;
end if;
end;
I am trying to add below insert statement to the above trigger.
-- inserting a entry in transaction table for mixing
insert into opns_mixing_inbound_trn (trn_id, trn_date, open_stock, inbound_trn_gages, outbound_trn_gages, close_stock)
values (opns_mixing_inbound_trn_seq.nextval, trn_date, l_open_stock, 0, :NEW.outbound_trn_gages, l_close_stock);
I am firing this trigger when i insert a record in OPNS_STOCK_INBOUND_TRN table, the trigger should update OPNS_OVERALL_TRN table and insert another record to OPNS_MIXING_INBOUND_TRN table.
Please update me the right solution.
Thank you,
Regards
- Thilip

Trying to update to 4.0 on my Mac. When trying to drag new icon to applications folder, it says 4.o already in place (it isn't), nad do I want to relace with older version. I do this and then it says change can't be done because Firefox is in use. ??

trying to update to 4.0 on my Mac. When trying to drag new icon to applications folder, it says 4.o already in place (it isn't), and do I want to replace with older version. I do this and then it says change can't be done because Firefox is in use. ??

That version cannot be upgraded further if it's a 2G model. The 3G model can be upgraded to iOS 5.x.x. You can't have a 2G model because the maximum iOS version is 4.2.1.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Trying 2 download new version of Firefox and after being prompted 2 drag Firefox icon into Applications folder, get message that task can't b completed bc Firefox is in use, but only use am making of Firefox is 2 have it open 2 download new version

Trying 2 download new version of Firefox and after being prompted 2 drag Firefox icon into Applications folder, get message that task can't b completed bc Firefox is in use, but only use am making of Firefox is 2 have it open 2 download new version

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Custom icon in application builder

I am trying to create an executable with custom icon using Application Builder in LabVIEW.
I converted a .png image to .ico for the icon, but when I select that .ico file as a custom icon, I get the following message:
"The selected file doesn't contain all of the needed icons. Without them, your application will show an incorrect icon in some views.
Missing icons:
32X32, 16 color
16X16, 16 color."
Any comments\suggestions on how to get custom icon would be appreciated.
Thanks.

It's possible that you don't have both 16x16 and 32x32 icons in 16 bit color. When you convert the .png to an .ico, see if there is an option to convert into necessary ico images that you need.
As a way to double check this without using application builder, load the VI : <vi.lib>\Platform\icon.llb\Read Icons for Application.vi
It will show you the different icons that are read from the .ico file.

Custom button icons in application header

Hi All,
I have a requirement, where I want to provide ability to end user to supply custom icons in application header.
For this I have created a class and extended from sap.m.Button.
and override setIcon method in my child class?
but could not get this to work? can someone help me out?
regards

Any pointers please help.
I am now able to display the icons.But how do I prevent expand/collapse on icon click?

While attempting to upgrade to Firefox 4, when prompted to drag icon to Applications, the Firefox icon has a white circle with a line through it, why?

I'm trying to load updated Firefox 4, when the blue drop down menu with the firefox icon and Applications folder icon (prompt to drag firefox icon to apps folder) the firefox icon has a white circle with a line through (like a "do not enter" symbol)

Hello puma1552,
Are you referring to the *Do Not Disconnect* screen display while your iPod is plugged into and syncing with iTunes? Check out this Apple support document for its meaning and why you are receiving this icon. This icon always appears when you are syncing your iPod with iTunes. It's basically a warning message telling you that the iPod is currently in use and should not be removed.
http://support.apple.com/kb/HT1378
B-rock

Mac attempting to open folders with the Icon Composer application

When opening a folder from anything other than a finder window(like the "Open In Finder" button in a stack or by clicking the preview icon in the Get Info box) my Mac attempts to open the folder with the Icon Composer application. Of corse this produces an error saying the Icon Composer cannot open files of this type. It is like the "Open With" setting got messed up somehow though there is no "open with" option for a folder that I can find. It does not matter whether the Icon Composer is running or not though this issue did not start until after I ran the application for the first time.
I have tried renaming the finder's .plist file and the finder's settings seem reset but the problem persists. If it were a problem with the Dock it would not persist within other apps(including the Get Info window right?
Any advice?

never see this one. try resetting launch services. delete the file /users/username/library/preferences/com.apple.launchservices.plist and try this again.

No icon or application in Application folder

I downloaded QT 7.4.5 for my G4 and copied the dmg to an external HD and connected the HD to my G4. I copied the dmg disk to my G4 desktop and installed QT 7.4.5 to my G4. The installation was successful and I restarted. No icon or application is in my Macintosh HD application folder. I searched with the finder under applications and QT is not there. Plus, I tried to load an earlier verson 7.4.1 and the installer said I can't load it because a newer version is already installed. Anyone have a clue where it might be?

Click on the external drive and choose Get Info from the File menu. If the format contains Mac OS Extended with or without anything after it, drag the iPhoto Library of the Pictures item in the Finder's sidebar to it. If not, open the Disk Utility in the /Applications/Utilities/ folder and depending on your needs, erase the drive, create a new partition in that format on it, or create a disk image on it(must be smaller than 4GB if drive is in the MS-DOS format.)
(52122)

How to install J2ME application on Nokia 6600

Can you help me in How to install J2ME application on Nokia 6600.Is it enough to build the application using J2ME wireless toolkit or we need any other Nokia SDK for it.

hi, it is not very difficult. I have done it this way :
1) i have set the following mime type in my web server (JRun 4):
text/vnd.sun.j2me.app-descriptor for the jad extension
application/java-archive for the jar extension
(in Jrun 4 i added them in the mime.types file in the lib directory)
2) i have published a wml page like this :
<?xml version="1.0"?>
<!DOCTYPE wml PUBLIC "-//PHONE.COM//DTD WML 1.3//EN" "http://www.phone.com/dtd/wml13.dtd">

<wml>
<card id="main" title="App Title">



<a title="Download App" href="http://xxx.xxx.xxx.xxx/App.jad "> Download </a>

</card>
</wml>
to download the jad file
3) then my AMS has started and i could download the application, which runs successfully.
Anyhow I had to configure 1 wap profile and 1 java profile in my M50 according to my provider configuration, and I bet you had to do so if you have not yet done it. I have successfully used a gprs configuration.
I am in Italy an so I have the italian provider's configurations. If this may be usefull to you i may send it.
Feel free to ask.
Hope this helps.

Re: install Firefox on Mac; after dragging FF icon to Applications window I can't eject Firefox from menu - is this OK?

After installing FireFox on Mac by dragging FireFox icon to Applications window you are supposed to hit the control button, click on FireFox within the window and hit eject. I don't have eject as a choice. Is this bad? If so, what do I do?

See also:
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
*http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

ORA-20102: Application collection does not exist

we have just started receiving this error though we have not changed any of our logic for creating collections.
ORA-20102: Application collection C_PORTS_FAV does not exist
the logic for all processes creating collections always starts with the following:
apex_collection.create_or_truncate_collection
(p_collection_name => 'C_PORTS_FAV');
my understanding is that if the collection does not exist, it will be created...and if it does exist, it will be truncated....so why the error?
any ideas appreciated. thanks
Karen

Karen:
Check the database alert log first. To locate this file do the following
Connect to the database using sqlplus
at the command prompt enter
show parameter background_dump
The alert log will be in the directory displayed upon entering the above command. The file will have a name like alert_<db_name>.log
varad
Edited by: varad acharya on Oct 20, 2009 3:07 PM

Key icon in Application collection (Nokia C3-00)

Similar Messages

Maybe you are looking for