Key lock problem!!!

I accidently pressed the key lock button and now my ipod is locked. I have NOOOO idea what my pass was and now I can't open my ipod. Please HELP!!

Restore it in iTunes and it will clear the lock. Then Resync.

Similar Messages

N97 mini key lock problem

Hi there NSeries experts!
I couldn´t find a topic related to my question,
so here´s my post:
I´ve got a little problem with my N97 mini
(type "RM-555" software-version: "11.0.102"):
The key lock button at the side of the phone
does not work properly in my eyes.
Sometimes - yes, it does not show up every
time you use it, only in about 50 % of usage -
when you use the button it works "back and
forth". That means, if you wanna lock the phone
it gets locked and then directly unlocked again,
although the button has only been used once.
Same thing sometimes the other way round:
The phone is locked, the button is used, the
phone unlocks and directely locks itself again.
It is not the worst bug I can imagine but after
a while it is quite annoying.
Does anyone have an idea what this is all
about? Do you think it is more likely some
hardware defect or rather more a software
bug?
Thanks for any help!
If you need further Info about the phone,
software etc. just tell me...
Tom.

Then if you want to try everthing before going to nokia, first try reset *#7370# , backup your data first. Still no success? Reflash with same firmware version via NSU. (back up your data in both cases)
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Nokia 5310 - key lock problem

I really like this phone but the only problem Im having is when Ive locked the keys (Menu + * key) Im sometimes finding it very slow to unlock as the screen seems to freeze. I have to repeatedly press the central menu key hard until the screen sparks back to life, then i can unlock the keypad again. Im sure this cant be right. Anyone else noticed this?
My firmware is 5.82

I am having the same problem. I want to eliminate the my 5310 Nokia from automatically locking the keys every 45 seconds, it really sucks having to press the unlock. I can't find the solution in the owners manual, so I am trying to
find the answer to remove the key lock. I cannot use a phone if all it does is puts on a keylock automatically.
Can you help me if you find the answer to remove the automatic keylock? I want to eliminte this.
Let me know, thanks
Scott

N70 Auto key-lock problem

I have got an auto key-lock on my phone, however I stupidly changed it and now I cant remember it. I can still receive in coming calls but cant get to any of my phone's main features. I hope you can help. Kind Regards, Gemma.

There was a post made yesterday about this exact problem, but it seems to have been removed...
Anyway, I'd recommend you take it to your nearest Nokia Service Centre
Take some proof of purchase if you can.
There seems to be something wrong with the links... Click the Contact Us link up near the top of the page and follow the instructions to the Service Centres.Message Edited by richcowell on 25-Jul-2006
12:29 PM
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Nokia E65 auto key lock problems

I fell down my handy.If i reopened i get the message for auto key lock? i did'nt put any code there and if i try with original code 12345 it did'nt work? What can i do?

I just took a look at the manual and it it absolutely pathetic. Never in a month of Sundays did I think that such an obvious function would not be mentioned. My apologies if I came across as condescending.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Auto key lock problem

Dear Sir / Madam
i Have purchase ASHA 308 Dual Simm mobile before 2 month ,
that are having or any setting is changed automatically key pad lock when every phon will be dialed at very quickend and not possible to open mike , loud speeker , conference, serching the any numbers
immediately goes to lock the keypad , We know the side unlock key , imediately that will goes to lock
and the message will tells "press the key unlock your phone "
pl any give any replysolution messge as soon as possible My Mobile *********
Moderator's note: We removed the phone number mentioned in the message. Posting of personal information in a public forum is not recommended.

kumar007in, you have to push that button for a second (rather long) while your are within a call, not before the call. Did that help?

5800 key lock problem during phone calls - firmwar...

See previous post that is marked as solved, but is not solved in my case.
I am using Mail for Exchange, my company forces the phone to lock after 10 minutes of idle time.
When I get a phonecall when the phone is locked, there is no way that you can have access tto normal phonecall functions as <Mute> and <Speaker> during a phonecall. And you can not unlock without breaking the call..
Yes when you receive a call ther is a green <answer> and a blue <unlock> slider. Howvever when swipng the <unlock> you can only choose between <answer> and <reject> and there is [Option] that gives you access to <answer> or <reject> aswell.
In other words no access to phone functions, No way you can activate the speaker on the phone when you were called while the phone was locked. This is quite useless and in my opinion a design flaw.
NOKIA HELP ---- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----
.NOKIA HELP ----

whats stupid that your company has locked the phone in some way?
back up your data and reformatt the phone if you wish this should remove the lock (where ever they got it from we would like to know)
this will take your phone back to out of box condition
try these code below
. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for all operations listed here is 12345
2. *#7370# - Reformat your phone
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

KEY LOCKING problem after updating to belle in e6

after updating to belle, it is difficult to unlock/lock using the trigger... Suppose if the phone is locked, when the trigger i locking pulled, it unlocks for a second and gets locked again.

Reinstall the Firmware and check. I am not ssure about the compatibility, but if you re-install using the NSU may give better results.
Pl. post the results after you do this..

MacBook Pro (Retina, Mid 2012) - Boot Camp/Win 7 - Num Lock Problem

Hey,
I have a client who has a MacBook Pro (Retina, Mid 2012) who is experiencing a problem when booted into Windows 7 via Boot Camp in that he cannot type certain character like # (hash character by keystroke alt + 3) without Windows 7 error bleeping at him. He needs the # character as part of his password for logging into webmail.
The Boot Camp setup has the latest Boot Camp drivers installed (this was a fresh Boot Camp setup/install today) and every other part of the hardware works I suspect that this problem is not a key mapping problem but more something to do with Windows registering Num Lock as being active.
If the problem is that Num Lock is enabled then what is the keystroke to disable Num Lock? I thought it was fn + 6 but did this change since the Unibody MacBooks?
I understand that there are ways of resurrecting number pad fuctionality as decribed in the MacWorld article (see link below) but this is a Mac OS X System Preference and as such would not operate when booted into Windows via Boot Camp.
http://www.macworld.com/article/1142609/ressurect_numberpad.html
Any advice will be greatly appreciated.

You have Graphics card problem.
Take it in Hardware problem:
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do
see if this applies http://appleinsider.com/articles/12/11/13/some-15-retina-macbook-pro-users-compl ain-of-graphics-issues-after-efi-update

Hp dv6700 keyboard some keys locked,

hp dv6700 keyboard some keys locked, like up and down aero, Enter button, some numric buttons, some alfabate keys, remember these also not working in bios setup,plz tell me the trick how can i solve this problem?

Hello Momma4952
Welcome to the HP Forums!
I understand that some keys on your computer keyboard have stopped working. I will do my best to help you out! First, please provide the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Have you installed any new hardware on this computer, before the issue appeared?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
I would also like you to attempt the following test: Connect an external keyboard to the computer and see if the keys on that keyboard work. If the keys do not work, then we are absolutely certain there is a software/driver conflict. Otherwise, there is the potential of a hardware failure.
Thanks for posting on the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Whats wrong with auto lock and key lock sound?

I don't know why my iphone 4s become cant auto lock after i update to ios 6. This is so ****** me off. And other one is i dont know why my key lock sound is so loud suddenly (after updated to ios 6) . Even i set my ringer as the lowest one but it still the same. Hope Apple can fix it real soon. I've annoyed by them quite a long time. Thanks!

YES! I'm having the same problem as is my husband. It's making us NUTS! Has anyone heard why? We're also noticing that sometimes the keypad doesn't even show up when you open a text message window. And also, sometimes we can't answer calls..it won't let us slide the bar. Soooo irritating..

Control key locks

i have an hp g-71167dx notebook. my control key show as being locked and i have to turn off my computer to clear it. pc is only 6 months old. are there any solutions ?

Hey edlibra and da9132,
There could be a couple of different causes/solutions for this issue. Here are some suggestions.
First try pressing both the Left and Right Ctrl keys down at the same time. See if that resolves the issue.
By default in Windows Ease of Access Center (Start > Type "ease" > Click Ease of Access Center > Click Make the keyboard easier to use > Click Set up Sticky Keys), Lock modifier keys when pressed twice in a row, is checked. Just uncheck that box and hopefully you won't run into that problem anymore. Modifier keys include Ctrl, Shift, and Alt.
You could also see if there is a BIOS update for your particular notebooks. I'll need both of your product numbers and whether you're using Windows 7 or Windows 8. Here are the steps to find your product number. Once I have your product number and version of Windows, I can provide you both with direct links to your latest BIOS driver.
To find the current BIOS version, follow the steps below (taken from here):
Windows 8 : From the Start screen, type msinfo32 . Click msinfo32 from the list of results.
Windows 7 and Vista : Click Start , enter msinfo32 in the search field, and then select msinfo32.exe from the list of results.
Windows XP : Click Start , select Run , enter msinfo32.exe in the Open field, and then click OK .
In the System Information window under the System Summary category, look for the BIOS Version/Date entry. This is your current BIOS version.
Figure 1: BIOS Version/Date
Write down the BIOS version and post it in your reply.
Please let me know if you have any questions or if these suggestions helped (this could help other users having the same issue). I'll keep an eye out for your reply.

Disable / re-assign key lock button on top of device

Hi,
I'd appreciate your help please. How can I disable or re-assign the key lock button on the top of my 9320?
Thanks
Andy
Solved!
Go to Solution.

Hi Welcome to the Forums!
You can't disable or re-assign the key lock button on your 9320, But you can on the "Convenience keys", the buttons on the left and right side of your device. Here's how: Assign an application to a convenience key.
Cheers!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Key Lock

Hello!
Since I upgraded my 9700, I have a problem with the key lock. I've already read, that a lot others have issues with it as well, but my problem is not, that I don't find the icon anymore. I use Blackberries because of the security options and need the keylock with a password. It used to be very convenient to just press the lockbutton on top. When I do so now, it just locks the keypad without password...
Is there any possibility to change that without downgrading the OS?

Yep, set the password and it will enable the lock ICON on the screen of the device. Then click that icon to lock. Move and set it on your top row of icons so it is readily available.
I don't know, but maybe you can set a Side convenience key too? Options > Screen/Keyboard.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Locking problem in BPS solution not getting solved using RSPLSE. SEM_BPS_S

Can anyone tell me exactly what "rsplse" offers to solve locking in BPS?
We have made correct selection of characteristics (in our case "costcentre" infoobject) in tab "Lock characteristics" , but still when two people are trying to access (write) data in the same transactional cube against the different cost centres, the system is throwing an error message Cube zIC_ccp is locked by username. (Or if a single person is using the two packages simultaneously using two web sessions , he is getting the same error. )
Our assessment is that he should not be facing this locking problem because cost centres here are acting as a key to different selection as configured in rsplse.
Can anyone tell me how to use parameter SEM_BPS_SAVE_UNLOCK. I want to know t. code and other t . code and other details to execute SEM_BPS_SAVE_UNLOCK.

Hi,
Please check the OSS note 635244.
From the OSS note :
 Notes on SET/GET parameters SEM_BPS_NO_LOCK, SEM_BPS_SAVE_UNLOCK :
These two parameters have nothing to do with the problem described above. They are only designed to facilitate the Customizing process, if users carry out Customizing in t ransaction BPS0 within a project.
SEM_BPS_NO_LOCK: This parameter has the effect that transaction data is not locked at all. Never use this parameter in a production system. As of Support Package 14 for Release 3.1B, parameter SEM_BPS_NO_LOCK is released by an additional switch in table upc_dark2: For this purpose you have to maintain a record with param = ENABLE_NO_LOCK and value = X in table upc_dark2. Only then the system includes parameter SEM_BPS_NO_LOCK. The parameter can then be useful if you want to test functions or the manual planning with 'test data' in Customizing.
SEM_BPS_SAVE_UNLOCK: This parameter only works in transaction BPS0; it has the effect that the system unlocks data (if possible) after it has been saved. Therefore, the system only simulates an exit and reentry in transaction BPS0 with the last active detail application. Therefore, the above parameter can be helpful if many people work on Customizing in transaction BPS0, because objects can be unlocked earlier.
Regards,
Siva.

Key lock problem!!!

Similar Messages

Maybe you are looking for