Key Mapping for iTunes use

I just got my keyboard replaced for the third time, all not my fault so covered under my warranty. The keyboard I had before this one was the newest version with the play/pause, forward, and backward keys on the f7, f8, and f9. My latest keyboard is the old version without those keys, but I used those keys often. Is there some way I can program or map those keys to be the same as the newest version keyboard.
Thank you! Meghan

Technically "AirPort Ready" indicates that your Mac has an internal slot for the proper Apple wireless card.
A Power Mac G4 800 MHz has an internal slot for the original AirPort card. It is not compatible with the AirPort Extreme card
AirPort Extreme is Apple's name for 802.11g. The original AirPort card is 802.11b.
802.11g is backward compatible with 802.11b. In other words, 802.11b devices can connect to a 802.11g device as long as the 802.11g device is configured in an 802.11b compatible mode.
AirTunes is only available on the AirPort Express.

Similar Messages

Question about key mapping for bank data in SP3 standard Vendor Repository

Hello Colleagues:
The situation is the following:
1) MDM Standard vendor repository does not use Key Mapping for the qualified table data "Bank Details". This makes sense because normally you would pay a vendor in the same account and bank regardless of the company or R/3 system you are paying him from.
2) However, here in my project customer don't have the same bank data for all of the 3 R/3 Systems. Furthermore, they would like to pay a vendor in a diferent bank and account number; depending on where the payment is generated (Company or R/3 system).
Because of this, I though about creating a lookup table for the banks which would use key mapping. I did this and I had no trouble importing bank data in to it.
Now I have this tables:
1) Banks: Lookup Flat:
Country and Bank Key as display fields.
2) Bank Details: Qualified Flat:
2.a) Field "Bank" as a non-qualifier display lookup field which points to a record on "Banks" table (Described in number 1).
2.b) The rest of the fields (Account number, Account holder, Reference, etc.) as qualifier non-display fields.
This aproach works well in data manager.
However, when I try to import vendors from R/3, I'm not being able to map the bank details, not even with "compound field" functionality, because I cannot map the display fields in the "Banks" lookup table (Described in number 1); in the "Map Fields/Values" tab in the Destination fields pane, it won't show any fields from this table.
Also, I'm not very sure if I will be able to syndicate this data back to the R/3 systems correctly, this is; replicate only the banks which exist on each R/3 client system.
Any ideas on how to solve this problem? Please help.
Best Regards,
Jorge.

... Where
did Terminal's default keystrokes (e.g., Esc,[5C for
ctrl-right-arrow) come from? They just produce
annoying beeps in bash. Are they standard sequences
for some shell that I don't know about? I
Somewhere deep in the bowels of computer history....for example
http://vt100.net/docs/vt100-ug/table3-6.html
http://www.termsys.demon.co.uk/vtansi.htm#cursor
that is to say, these codes date back to early hardware terminals such as the VT100. I believe. And that is why Terminal is a member of a class of software called "terminal emulators".

Key mapping for forms on web

Presently we are using forms 4.5. We have got costomise key
mapping for operating through forms. Now we want to start forms
on web (Intranet). Earlier we use to change key mapping through
oracle*terminal. I require help in knowing how to customise key
mapping in forms 6i / oracle 8.1.7.

Hi,
Boy, I have some good news to you: Oracle*Terminal is no longer
needed.
WordPad (or your favorite text editor) is your tool from now on.
Keyboard files are located in $ORACLE_HOME\FORMS60.
Simply ignore the binary file fmrusw.res when you run Forms on
the Web. FMRWEB.RES is the one that is used, and it's pure ASCII.
There are some comments in the file itself.
The keys are the same as the Motif version of Forms.
If you prefer the Windows keys, simply use FMRPCWEB.RES instead.
How? Check under $ORACLE_HOME\FORMS60\SERVER for your
formsweb.cfg, go to User Parameters and replace the
otherparams=
line with
otherparams=term=%forms60%\fmrpcweb.res
Now, anyone can define the Function-0 till Function-9 key
combinations, in order to use KEY-F0 till KEY-F9 triggers.
Hope this helps,
Pedro das Neves
[email protected]

Change Key Mapping for RWMS handheld application

Dear Experts,
When we login to handheld in rwms
http://hostname:9001/forms/frmservlet?config=rwms1324inst_hh
we are login with USERID: PAR3214
PASSWD:PAR3214
FACILITY ID : PR
Now, if we press CTRL+F4, it is login
My requirment is to change the login option. Instead of CTRL+F4, it should be mapped to something else like "SHIFT+F4" particularly for RWMS hand held applications.
Regards,
Ratnesh

Hi Ratnesh
RWMS 14.1 Install Guide ( http://docs.oracle.com/cd/E12456_01/rwms/pdf/141/rwms-141-ig-05.pdf ) has good details on this:
Update fmrweb.res for Keymapping
The fmrweb.res file is used to specify key-mapping for the radio frequency devices that are set up in the formsweb.cfg file.
1. Depending upon device this file may need to be updated.
2. The installer places a copy in the directory specified in the formsweb.cfg file for each radio frequency URL that is created
3. The fmrweb.res file comes with key-mapping of CTRL+<number> to work for function keys by default.
This fmrweb.res is passed as a parameter in formsweb.cfg as otherparams variable.
Thanks
Amod

I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that account. How do I change the email address to a new one that I can access?

I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that same account. Now I can't seem to login to that account and I can't choose the option for forgot password because it will send email to the old workplace. How do I change the email address to a new one that I can access?

If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you!

Key Mapping for Flat lookup tables

Hi,
How do we decide if we need to make Key Mapping "Yes" for flat look-up tables?
Can anyone plz explain with an eg on where to make key mapping yes or no for Flat Tables.
Thanks,
Ketan

Hi,
Can anyone plz explain with an eg on where to make key mapping yes or no for Flat Tables.
1. A remote systems objects are mapped to master data objects within MDM using key mapping. A key mapping maintains the relationship between the remote systems identifier (or key) for an object and the corresponding master data object in MDM.
2. in the data manger based upon some strategy, you found that 4 records are duplicate, and then you merged into single record.
the merged record is having 4 records inside it with respective remote keys.
if you want to edit those records, key mapping should be enabled for that particular table.
3. while harmonizing the records to the respective client systems, you can use edit key mapping functionality for merged records.
if you enabled key mapping functionality in the console for the particular table, then only you can aceess EDIT KEY MAPPINGS functionality in data manager & syndicator.
hope this may help you,
Regards,
Srinivas

FCP pre-created key mapping for other NLE's?

The key mapping feature of FCP is handy because you can set up
a custom keyboard that emulates another NLE editing system that you
might be more familiar with while learning FCP (i.e. Avid).
Does anybody know if anyone has created keyboard mapping
file presets for download or purchase? I'm interested in emulating
Pinnacle key mapping in FCP. I realize I can manually create it but thought
perhaps there was a source you could go to where it was already done
for you.
Any input would be appreciated.
Thanks.

I don't think there's any place to buy them.. you might find a user on here who has emulated something like that and could email it to you. I use a keyboard mapping similar to Avid but it really is the best of both keyboards in one IMHO.
it's easy to map so with the time spent searching you could probably make it to your liking.

Key Mapping for Forms

Hi All,
I have 100+ forms, I want to disable some keys in them. e.g. Key-Menu, key-duprec. I can not put a trigger with trigger text 'null;' in each form or inherit an object group and generate again. Can I do something global to remove these key mappings?
Regards
Mona

Mona,
just an idea: maybe you can create your own keyboard file (.res -file) and assign 'harmless' values to
Key-menu and key-duprec. Then use the term= tag when you call a form, eg:
form=<yourform> term=<yourterm-file>
kind regards,
Ivan
>Hi All,
I have 100+ forms, I want to disable some keys in them. e.g. Key-Menu, key-duprec. I can not put a trigger with trigger text 'null;' in each form or inherit an object group and generate again. Can I do something global to remove these key mappings?
Regards
Mona

I'm completely unable to finish creating an American Apple ID for itunes use.

Hey guys, just purchased my Ipad mini, but I'm having some problems setting up an Apple Id via Ipad mini/itunes/and the internet. No luck with any of them. I'll try and provide with as much detail as possible in order to help.
I'm currently living in China. The Ipad was purchased in China yesterday (Im hoping the hardware itself isn't relevant to the problem).
I've been trying to register an account for the US app. store. Whenever I get the part where I need to provide credit card information (even when I bypass that information and select the "none" feature), after inputting everything correctly (this includes using an American credit card with us billing information) it tells me, specifically, "please contact itunes support to complete this transaction."
Unfortunately, it's pretty difficult to contact support as I'm living in China and have a pretty terrible Chinese phone. I use skype, and the calls get dropped sometimes. Really no other option at this moment. I spent about four hours talking to various people yesterday, and no one could really figure it out. Some people said it was because I was currently located in China that it wouldn't let me register with the American account. Other people said it shouldn't have a problem. Other times my skype calls would drop, and I'd have to start this explanation over again with someone new.
Would having someone currently in America register an account using my information and just giving me the account and password work?
Any ideas?
I haven't tried accessing the Chinese store, as I'd prefer having the American one. I'm not sure whether or not I'd need a Chinese card (I don't have one).
I've heard that purchasing apps from two different countries' stores on one device can cause problems. For example, if I moved back to the United States with Chinese purchased apps, would they be supported on an American apple ID?
Thanks a lot!

You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country...

Regarding the key mapping for 10g forms as in 6i forms

Hi All,
I want the kep mappings of oracle forms 6i to be implemented in oracle forms 10g. I have made the changes in the fmrweb.res file as shown below. Can any one just check it once and let me know whether the mapping is correct?.
116 : 1 : "Shift+F5" : 69 : "Clear Block"
85 : 2 : "Ctrl+U" : 3 : "Clear Field"
118 : 1 : "Shift+F7" : 74 : "Clear Form"
115 : 1 : "Shift+F4" : 62 : "Clear Record"
117 : 1 : "Shift+F6" : 63 : "Delete Record"
112 : 1 : "Shift+F1" : 78 : "Display Error" XX
76 : 2 : "Ctrl+L" : 7 : "Down"
40 : 0 : "Down" : 7 : "Down"
114 : 0 : "F3" : 73 : "Duplicate Field"
115 : 0 : "F4" : 64 : "Duplicate Record"
69 : 2 : "Ctrl+E" : 22 : "Edit"
118 : 0 : "F7" : 76 : "Enter Query"
119 : 0 : "F8" : 77 : "Execute Query"
112 : 0 : "F1" : 30 : "Help"
120 : 3 : "F9" : 29 : "List of Values"
117 : 0 : "F6" : 62 : "Clear Record"
34 : 2 : "Ctrl+PageDown" : 71 : "Next Block"
9 : 2 : "ctrl+Tab" : 1 : "Next Field"
114 : 1 : "Shift+F3" : 61 : "Next Primary Key"
1005 : 1 : "Shift+Down" : 67 : "Next Record"
119 : 2 : "Ctrl+>" : 66 : "Next Set of Records"
33 : 2 : "Ctrl+PageUp" : 72 : "Previous Block"
9 : 3 : "Shift+Crtl+Tab" : 2 : "Previous Field"
38 : 1 : "Shift+Up" : 68 : "Previous Record"
119 : 1 : "Shift+F8" : 79 : "Print"
112 : 2 : "Ctrl+F1" : 35 : "Show Keys"
80 : 2 : "Ctrl+P" : 6 : "Up"
I am not able to find the mapping keys for the following keys of 6i in 10g. Can these keys be mapped?.
Accept
Cancel
Count Matching Records
Debug Mode
Delete Backward
Left
New Record
Next Set Of Records
Previous Menu
Return
Right
Regards,
Prasad.

I think this one will have both keys in 10g from forms 6i/10g...and the rest you asked.
9    : 0 : "Tab"            : 1 : "Next Field"
9    : 2 : "Ctrl+Tab"         : 1 : "Next Field"
9    : 1 : "Shift+Tab"      : 2 : "Previous Field"
9    : 3 : "Shift+Ctrl+Tab" : 2 : "Previous Field"
85   : 2 : "Ctrl+U"         : 3 : "Clear Field"
38   : 0 : "Up"             : 6 : "Up"
40   : 0 : "Down"           : 7 : "Down"
33   : 0 : "PageUp"         : 12 : "Scroll Up"
34   : 0 : "PageDown"       : 13 : "Scroll Down"
69   : 2 : "Ctrl+E"         : 22 : "Edit"
10   : 0 : "Enter"         : 27 : "Return"
120 : 0 : "F9"              : 29 : "List of Values"
76   : 2 : "Ctrl+L"         : 29 : "List of Values"
81   : 2 : "Ctrl+Q"         : 32 : "Exit"
75   : 2 : "Ctrl+K"         : 35 : "Show Keys"
112 : 2 : "Ctrl+F1"         : 35 : "Show Keys"
83   : 2 : "Ctrl+S"         : 36 : "Commit"
121 : 2 : "F10"         : 36 : "Commit"
114 : 1 : "Shift+F3"       : 61 : "Next Primary Key"
115 : 1 : "Shift+F4"       : 62 : "Clear Record"
117 : 1 : "Shift+F6"       : 63 : "Delete Record"
115 : 0 : "F4"             : 64 : "Duplicate Record"
117 : 0 : "F6"             : 65 : "Insert Record"
119 : 1 : "Shift+F8"       : 66 : "Next Set of Records"
1005 : 0 : "Down"           : 67 : "Next Record"
1004 : 0 : "Up"             : 68 : "Previous Record"
40   : 1 : "Shift+Down"     : 67 : "Next Record"
38   : 1 : "Shift+Up"       : 68 : "Previous Record"
116 : 1 : "Shift+F5"       : 69 : "Clear Block"
116 : 0 : "F5"              : 70 : "Block Menu"
34   : 1 : "Shift+PageDown" : 71 : "Next Block"
33   : 1 : "Shift+PageUp"   : 72 : "Previous Block"
34   : 2 : "Ctrl+PageDown" : 71 : "Next Block"
33   : 2 : "Ctrl+PageUp"    : 72 : "Previous Block"
114 : 0 : "F3"             : 73 : "Duplicate Field"
118 : 1 : "Shift+F7"       : 74 : "Clear Form"
118 : 0 : "F7"             : 76 : "Enter Query"
119 : 0 : "F8"             : 77 : "Execute Query"
122 : 0 : "F11"            : 76 : "Enter Query"
122 : 2 : "Ctrl+F11"       : 77 : "Execute Query"
112 : 1 : "Shift+F1"         : 78 : "Display Error"
80   : 2 : "Ctrl+P"         : 79 : "Print"
113 : 1 : "Shift+F2"         : 80 : "Count Query"
123 : 0 : "F12"            : 81 : "Update Record"
121 : 3 : "Shift+Ctrl+F10" : 82 : "Function 0"
112 : 3 : "Shift+Ctrl+F1" : 83 : "Function 1"
113 : 3 : "Shift+Ctrl+F2" : 84 : "Function 2"
114 : 3 : "Shift+Ctrl+F3" : 85 : "Function 3"
115 : 3 : "Shift+Ctrl+F4" : 86 : "Function 4"
116 : 3 : "Shift+Ctrl+F5" : 87 : "Function 5"
117 : 3 : "Shift+Ctrl+F6" : 88 : "Function 6"
118 : 3 : "Shift+Ctrl+F7" : 89 : "Function 7"
119 : 3 : "Shift+Ctrl+F8" : 90 : "Function 8"
120 : 3 : "Shift+Ctrl+F9" : 91 : "Function 9"
113 : 0 : "F2"             : 95 : "List Tab Pages"
72   : 2 : "Ctrl+H"         : 30 : "Help"
112 : 0 : "F1"              : 30 : "Help"

How do you import minidisc / audio cassette tracks for iTunes use?

Have old family audio cassettes (originals) and minidiscs (recorded from cassettes) and really want to convert them to mp3
Would be more than grateful for your advice! Cheers, Matt

Your powerbook has a line-in connection, so you can connect it with a line-out of an audio device.
You could also use an USB device like the iMic.
Such a device generally gives better audio quality than using the direct line-in.
Next, you need an application to record the digitized audio.
You can start with the freeware audio editor Audacity, which is a good editor and has lots of filtering possibilities.
Other audio editors like Amadeus II or Sound Studio 3 offer more functions.
Specialized applications, like CD Spin Doctor make it very easy to record, burn and transfer the audio to iTunes.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.6) Several ext. HD (backup and data)

MAPPING for xi USED-DEFINED FUNCTION(UDF)

Hi, all !
Does anybody know how to use package com.sap.engine.lib.security.http.* in the UDF ?
when i import it in the UDF ,the system reports " package com.sap.engine.lib.security.http does not exist"
can anybody help me ?
Thanks a lot in advance!
Edited by: ALAN WANG on Sep 16, 2008 10:44 AM

HI,
Check Adapter Specific Message attributes.This blog will help you
The specified item was not found.
You can also go for variable substitution :-
When you specify the target directory and file name schema, you have option of setting variables and defining them in a table. The variables are replaced by elements from the XML structure at runtime.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8e/464442c1a1c253e10000000a1550b0/content.htm
links on the dynamic variable substitution
The specified item was not found.
The specified item was not found.
Dynamic File Name Part 1
Dynamic File Name using XI 3.0 SP12 Part - I
Dynamic File Name Part 2
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
Thanks

Terminal key mapping for control-arrow, home, end, etc.

This isn't exactly an "I need it now" kind of question, but in brief, what was Apple thinking when they set up the default behavior of ctrl-left-arrow, ctrl-right-arrow, home and end in Terminal?
I'm using OS X 10.4, with the default bash shell. I would like the above-mentioned keystrokes to act like they do in Windows, moving to the beginning and end of words and lines, respectively. I know a couple of ways to do this:
(1) use the Terminal -> Window Settings -> Keyboard window to remap these keys to send the strings (Esc,b), (Esc,f), ctrl-a and ctrl-e; or
(2) add entries to ~/.inputrc to remap Terminal's default strings for these keys to perform the desired action (see http://koorb.co.uk/scrapbook/ or http://www.macosxhints.com/article.php?story=20050525040921189 ).
So, I'm pretty happy now. But I want to make sure I choose the "right" approach, so I want to know which of these approaches is more "normal." Or in other words, why didn't this work in the first place? Where did Terminal's default keystrokes (e.g., Esc,[5C for ctrl-right-arrow) come from? They just produce annoying beeps in bash. Are they standard sequences for some shell that I don't know about? If not, why did Apple pick these keystrokes, instead of using something like "ctrl-E" which would do something useful in bash, which is after all the default shell? I'm basically trying to decide whether I should fix Terminal or fix the shell to work the way I want.
On a related note, does anyone have any idea how I can get command-right-arrow and command-left-arrow to go to the beginning and end of a line in Terminal, instead of switching between Terminal windows?
Thanks for your help!

... Where
did Terminal's default keystrokes (e.g., Esc,[5C for
ctrl-right-arrow) come from? They just produce
annoying beeps in bash. Are they standard sequences
for some shell that I don't know about? I
Somewhere deep in the bowels of computer history....for example
http://vt100.net/docs/vt100-ug/table3-6.html
http://www.termsys.demon.co.uk/vtansi.htm#cursor
that is to say, these codes date back to early hardware terminals such as the VT100. I believe. And that is why Terminal is a member of a class of software called "terminal emulators".

Best Setting for iTunes using Compressor 4

Can anyone give me a little advice. I have recently purchased a Panasonic X900 camcorder, very happy with the ease of use in FCPX using 1080/50p with surround sound. I use iTunes to play home movies to my television what would be the best compressor settings to make the most of this quality?
Also what would be the best setup to create Blu Ray Discs as previously I have used iDVD but I really want to make the best quality I can.
Thank you in advance.

Hi Ian,
Try one of the Apple TV presets for your movies.
Blu-Ray is a little complicated. There is a template choice in Compressor that will encode and burn either a physical or virtual (disk image) BD. By all means try it. It's a very limited menu and options. You'll need a Blu-Ray burner and a player and, of course, media.. If you want to move up to the kind of menus and selections you can work with in DVD Studio Pro and iDVD, you probably need to look at Adobe.
Good luck.
Russ

Soft key mapping for Nokia6682

What are the two softkeys on left and right of the 4 way pad
called.
I tried
on (keyPress "<PageUp>") and <PageDown>
Neither of these worked?
up, down, left, right, and enter are mapped to the joystick.
any help

Ciao
are you working on FL1.1?
To use the soft keys you need first to reset them:
fscommand2("SetSoftKeys", "", "");
Then you can use the soft keys PageUp and PageDown
Alessandro

Key Mapping for iTunes use

Similar Messages

Maybe you are looking for