" + " key on the keypad function of the phone

On conventional cell phones, when dialling internationally, one types " + " then the country code etc. The " + " represents the local dial into the international phone system. How do I type the " + " symbol on the iPhone keypad when it is in phone mode?
Cheers.
Gaffer

Press the 0 until you see the +, then release.

Similar Messages

  • Convenience keys opening the phone screen.

    I have a Curve 8530. The convenience keys are going to the phone screen. The right is entering the letters Hi and the left is entering Yi.
    I've checked the options and its set on camera and voice dial defaults.
    I've tried enabling memory cleaning. I am at a loss. Please help.
    Thanks

    Try restoring as new, i.e. without your backup.

  • HT4623 I just got my new iPhone 4 and wish to use my hands-free in my 2006 Prius.  How do I set this up using the phone

    Well I just got a new iPhone 4 and wish to use my Toyota Prius Hands-Free capabilities with the new phone in my 2006 Prius.
    I tried setting up in the car but it says to enter pass key on the phone; which I can't figure out how to do as it gives me a key pad but
    the only button is the "Call" button???

    You must unlock your phone by entering its passcode (if any), then go to Settings/Bluetooth. In the car you must enable Pairing mode (check the manual for the car). When the two see each other you may have to enter a pairing passcode, but this should be displayed in the car. For most hands-free pairing the passcode will be "0000", but you should check the car's manual.

  • HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

    I have 4s with 16GB storage capacity using IOS 7.1.2.
    Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
    Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
    Kindly resolve the issue as soon as possible
    Ashish
    [email protected]

    Did you already try to set it up as a new device, as explained in this article?
    iOS: How to back up your data and set up your device as a new device

  • HT201210 When I go to my contacts function for my phone and do search, or try to edit a contact, my keypad won't come up.  It seems to come up on all other apps.  Any idea what the problem is?

    The keypad doesn't come up on the phone, contacts function.  I can't search by typing in a name or edit existing contacts.  Keypad works on other functions.  Any ideas what is going on?

    I'll guess that you are taping into the search bar in Contacts? If so, why not try forcing closed the contacts app. Double tap on the home button and find the contacts app and swipe upwards on the thumbnail of the app. Then tap the home button to close. Next hold the sleep/wake and home button together until you see the Apple logo and then release. The phone will reboot and will have no affect on your data. After the phone reboots, check to see if it functions.

  • Screen Saver when calling and need to use the Keypad, the screen saver doesn't detect the phone has left the ear and blanks out the screen.  Even ending a call is difficult as the screen blanks out within seconds

    I have to use the Keypad a lot when making calls.  Make the call, the Robot then asks to enter a number for a service, pull the phone down from the ear, the screen may light up for a second, but then the screen saver cuts in, blanking the screen out.  Sometimes you hit the Home Key to awaken the sccreen, enter your number and then back to the ear to hear the next set of instructions.  Back and forth just trying to enter the options is a pain.  Sometimes even trying to end the call, the screen blanks out and you fight to try and end a call.
    If I use the Speaker function the keypad works; the speakler phone is not alway appropriate. 
    It appears that the phone gyro, doesn't detect the phone has moved from the ear to the viewing angle.  This wasn't an issue until recently and I can't remeber if it's the iPhone 5 or one of the updates.  It definitly wasn't there earlier on, as I threw away an Windows 6.5 phone for the same problem. 
    I'm not sure if it's a hardware or software (design) issue.

    It is not the gyro. This has everything to do with the iPhone's prioximity sensor.
    Are you using a case that may be blocking or partially blocking the proximity sensor? If you are using the case, remove the case prior to the next call to see if the same occurs without the case.

  • HT3529 I've lost the ability to create and reply to iMessages as no keypad function showing

    I've lost the ability to create and reply to iMessages as there is no keypad function available. 

    First, try resetting your phone:
    Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.

  • Help- all functions on my iphone work except the phone

    Suddenly last night I became unable to use the phone function on my iphone. Everything else works fine, but when i select phone it pulls up my contact list and i am unable to scroll or chose a phone option from the bottom (keypad, favorites, recents..). i have tried turning the iphone off and back on, i've checked to make sure it's not on airplane setting, and i haven't dropped it or anything. it just suddenly started doing this. i'm away from home, so i can't connect to itunes. any help?
    -newbie

    Have you tried reset?
    Restore?
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • Where's the phone key pad

    how to find  / where is the phone key pad with ios 7 all I get is face time no key pad

    The delete key or backspace key is all that there is on a MacBook. It functions as a backward delete. If you want to use a forward delete, you need to hold down the fn (function) key in the bottom left of your keyboard and hit the delete or backspace key. For a more functional or normal approach for heavy writing, I might suggest an external keyboard with the forward delete key in place. -GDF

  • Any application to colour the screen behind the keypad of the phone call numbers ?

    Hello, please need help.
    With ios7 newly downloaded, is there any function  to change the coulour of the screen behind the keypad of the phone call numbers. 
    Its too much white actually and unseenable while outsite or in day light.
    Thank you for you help.  ? Ci Kay

    Note that this simply identifies the device, not the user. So if a user sells or gives away his device if you use this mechanism the new owner will be able to access anything from the old owner.
    Additionally, you also need to handle device replacement-- i.e. owner takes device in for repair, gets a new device how do you disassociate the information from the old device and associate it with the new device and ensure that whomever gets the old device as a refurb does not have access.
    rob.

  • I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to reprogram a different key to be my plus/equals key? Can I program a function key? key

    I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this function?

    Water + electronics do not mix.  Something was damaged insode, and the logic board may be corroding as is.
    Take it to a Genius Bar for an evaluation and repair estimate.
    This is accidental damage and not covered by warranty.

  • I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7. Please confirm. iPhone

    I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
    Please confirm.
    iPhone 4, iOS 7

    Hello jayanand,
    You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    Allen

  • Is it possible to edit a number in the phone dial keypad or we have to wait till iOS 12?

    I use an iPhone 5c and and i've been waiting for a cursor on the dial pad after every iOS update since I started using an iPhone.
    one most annoying thing is realising you omitted a number from a long phone number or a recharge code, you have to clear all and start again.
    Check the image below, If you want to insert the number 2, you'll have to clear everything, and start all over.
    One more thing is number suggestion or smart dialling; if I wanna call 'Joe' in my contacts, shouldn't I be able to press 5-6-3 to get names suggestions within that number combinations?
    Why does Apple want to wait for iOS 12 to do this? Do they ever check other phone OS? I love iPhone but sometimes its hard we have to wait for two years before they introduce some simple feature that already existed.
    Just because they're focusing on new groundbreaking features doesn't mean they can't make that possible?
    We know its impossible for Apple to put FM radio in the iPhone because they want to sell the iPhone 8 with a new fm radio feature; but a better dial keypad, come on!! Make some upgrade.
    My question here is... is it possible for Apple to make the phone dial pad editable aside Copy/Paste options or make it suggest names when u start dialling; or is there a Setting I need to change to make that possible?

    Hi ChrisJ4203,
    I see you didn't comment on editing the numbers in the keypad, I believe you have that problem too but you forgot to click "I have this question too".
    By the way I've sent a couple feedback messages to Apple already and thanks for reminding me, I guess I'll have to be doing that more often.
    Enjoy your day

  • I had an iphone 4 and when I downloaded the IOS7 started having problems. Gone the phone keypad, could not type more names of my contacts in the phone search. I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of yo

    I had an iphone 4 and when I downloaded the IOS7 started having problems. Gone the phone keypad, could not type more names of my contacts in the phone search. I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of your phone contacts it takes to open or write

    dedegodoy wrote:
    I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of your phone contacts it takes to open or write
    What does that mean? What is your technical support question?

  • The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. Please Help!

    The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!

    OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
    1. Powered off my MacBook and removed everything connected except for the power chord.
    2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
    3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
    Just added another couple of years usage with my aging mac :-)

  • I can't get rid of the set voicemail password page and it won't let me cancel to get to the keypad so how do I operate the phone?

    I have been left a voicemail message, but the phone keeps asking me to set a voicemail password, fails to save it, (says voicemail unavailable), then won't let me cancel, so I can't get to the keypad or use the phone to make calls! help!

    Guess you have fixed this now, please tell me how.  Am abroad and  have same problem, desperate to make calls

Maybe you are looking for

  • Adobe Form not getting displayed on the portal

    Hi, From the MSS portal when I run the process, the associated adobe form(using HCM) doesn't get displayed on the portal. Initially the problem was with higher version of acrobat reader but now it is solved. Now I am not getting any error or warning

  • New install help. Please and thanks!

    I'm hoping somebody can tell me what's going wrong with my new install.  Here are the details: Win7 pro i7 950 Quadro 4000 (with massive cooling blowing on the thing) mxo2 mini max (because I'm slightly cheap, and yes, I feel a little like a hack plu

  • Import Manager Question

    Hi Experts, Here is my current situation: I am importing roughly 25,000 vendor master records into an empty repository (with XML's). There are a few tuples (Company Code / Purchase Org) that often times one or the other will NOT have any information

  • Problem in Setting up database connection

    Hi, When i try to create a new database connection on jdeveloper 9.0.3 and click on test connections i get this error:ORA-28030: Server encountered problems accessing LDAP directory service. Can anyone help me out of this problem. Infact i copied a d

  • JavaFX packager not working with Wix 3.8

    Building a MSI on Windows 7 error in Netbeans, the generated build script jfx-impl.xml contains a line that validates the presence of Wix.  The block that has an issue shown below.  When running the Wix candle application from the command line the ou