Key pad and trake pad wont work

I have a curve9360 and for some reason the other day it just decided it wont work. The phone is password protected and it wont let me type anything password or not. This morning i finally got into the phone but the trackpad wouldnt don anything except stay on the time and date at the top of the screen. I havent had the phone long im totally lost can anyone help me please??

Hi and Welcome to the Community!
For your first diagnostic step, I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode and if the behavior does not present, think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
If the behavior presents in Safe Mode, then there are much more challenging diagnostic/repair steps to attempt, none of which are guaranteed to work, especially if you have a hardware problem...which, if that is the case, would need diagnosis/evaluation by a qualified hardware technician (preferably under warranty, if you have such).
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

The new itunes update will not install properly and now itunes wont work at all

k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

My issue is it wont even reinstall onto my computer
Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

Hi , i have a 4th gen ipod touch and it runs on 4.3.5 but it wont let me update it to 5.1.1! everytime i try to install it..it says "sorry your network timed out" and wont let me! i tried so many times and it still wont work.. what to do?

hi , i have a 4th gen ipod touch and it runs on 4.3.5 but it wont let me update it to 5.1.1! everytime i try to install it..it says "sorry your network timed out" and wont let me! i tried so many times and it still wont work.. what to do?

Disabling the computer's security software (firewall and antivirus) usually resolves that error.

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

Hi could someone help me please ? Ive just bought the new ipad and want to put some movies on it. I have already converted some movies using handbrake and tried to transfer them to my ipad and it just wont work. ive tried drag and drop and everything

Hi could someone help me please ? Ive just bought the new ipad and want to put some movies on it. I have already converted some movies using handbrake and tried to transfer them to my ipad and it just wont work. ive tried drag and drop and everything

bluztoo wrote:
Haven't really used any of them including VLC - actually use netflix on the ipad more than anything. I was able to drop an mp4 into imovie on my ipad and see it there. This was something I had shot as avhcd and converted with turbo.264. Played fine. Probably not what you want for a movie player though.
Well, turbo.264 is indeed very nice to have - even for converting full-sized movies. (Nevertheless, TechRadar's latest roundup (see http://www.techradar.com/news/software/applications/6-of-the-best-video-converte rs-for-mac-1074303 ; also linked from another roundup at http://www.iphonelife.com/blog/87/benchmark-excellent-multimedia-converter-handb rake-vs-commercial-apps ) has shown it's still worse than HandBrake in most respects.)
All H.264 files (assuming they are H.264 level 4.1 or lower) are compatible with the built-in Videos app.
bluztoo wrote:
Those of you who use other players, what do you reccomend? Just curious.
It entirely depends on your needs. The top players (AVPlayerHD / ProPlayer, It's Playing, GoodPlayer) all have different strengths and weaknesses. I myself use It's Playing the most as I convert everything into MP4 and simply love the DSP's (brightness / volume / saturation boosting). (Its software decoders are definitely worse than those of AVPlayerHD / ProPlayer; however, MP4's are played back from hardware.)

I accdently formated my shuffle and now it wont work what do i do?

I accdently formated my shuffle and now it wont work what do i do?
That and when I plug the shuffle in to the comp iTunes doesn't reconize that the shuffle is pluged in.
it has updated a-few times. and when iTunes sees that the shuffle is in the comp it tells me that the songs are on the shuffle.............but when i unplug it and put my headphones in no music comes out of it!
so what am i to do
shuffle 512MB Windows XP

I'm having the same problem! My good-for-nothing brother has formatted iPod shuffle through "My Computer" and now it won't work. Neither iTunes nor iPod software updater recognise the thing. To be honest, neither application even start when the shuffle is plugged in! And now I've just read that apple says you "SHOULD NOT FORMAT" shuffle. What am I to do? Have I lost my iPod for ever?

I updated my iphone to the ios6 and now it wont work.

i updated my iphone to the ios6... and now it wont work at all.
it wont even turn on, it keeps going back and forth between the black screen and then the apple mark pops up for a few seconds, and then turns back to the black screen again... and that just keeps going on...
someone please help...

Seems like ios6 isn't any good for any of their devices. I have an iPhone 4 and recently updated to ios6 and have had all the wifi problems and apps getting hung up on load screens. Restore is your best bet and downgrade if you can back to ios 5.1. If restore doesn't help with a fresh install of ios6 then call every Apple support number you can find and be heard like the 1,000s of other people like us with ios6 problems demanding support. There doesn't seem to be any quick fixes for ios6 other than an update from Apple.
<Edited By Host>

I have the iPod 5th gen. and my iPod wont connect to my wifi. I've tried everything. I reset my wifi networks and it still wont work. What do i do???

I have the iPod 5th gen. and my iPod wont connect to my wifi. I've tried everything. i rest my wifi networks and it still wont work. What do I do??

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
For the future, saying you tried everything provides use with zero info as to what you did try. If you really tried everything then there is no way we could help

HT4993 Everytime i plug my phone into itunes it says it cant connect because the phone is locked well i restored my phone twice and set a new passcode the last time and it still wont work . I even deleted itunes and reinstalled it , it dosent work . HELP

Everytime i plug my phone into itunes it says it cant connect because the phone is locked well i restored my phone twice and set a new passcode the last time and it still wont work . I even deleted itunes and reinstalled it , it dosent work . HELP PLZ !!

I had the same issue. I tried everything unchecking / rechecking, formatting Iphone and restoring from backup etc etc.
In the end it was a simple issue which might of might not help you.
A number of months ago I relocated by Itunes folder to a NAS drive. It appears when I did the last I tunes update Itunes set the destination path of the Itunes media to the default location, the result was Itunes couldn't install music,apps, video until I set the correct destination path.
The bit that confused me was it was transferring some media. This was of course the media I had downloaded since the last Itunes update which had gone to the default location.
I hope that makes sense and is off some help.

I connected my ipod before installing softwear and now it wont work

i connected my ipod before installing softwear and now it wont work...like abosolutely nothing...its frozen

First of all, try resetting the iPod. It may take several attempts and is best done connected power.
Then download the iPod Updater, install this to your computer, restart the computer, run the Updater, then connect your iPod when prompted (not before), then follow the set up procedure.

I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

Headsets don't come with the iPad. All you get is the iPad, USB cable and wall charger.
Since you're new to iPad ...
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

I just deleted 300 messages on my iphone 4 and now it wont work. What to do?

I decided to delete about 300 messages from my iphone 4 and now it wont work. I can't sent any messages. I tried to turn off my phone... But nothing seems to work. Please help!

Reset the device by pressing and holding the home and power buttons until the white Apple logo appears.

I downloaded the update and now it wont work.

I downloaded the update and now it wont work. It just shows me a screen with a lightning chord going to the Itunes icon. Am I supposed to plug it into my mac or something?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

New iMac and iDVD just wont work!

All,
Just got a new iMac and iDVD just wont work, from creating a new project, or opening an old one, or trying to share from iMovie (HD)
If I try to do anything nothing seems to happen and when I close the program a window does appear and from there it just freezes.
Have deleted and reinstalled iDVD, repaired permissions, all up to date in my on software updates...any ideas?
Thanks
Zara

*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W

Downloaded IO5 to my 3gs and now it wont work

I just tried to download IO5 to my 3GS and now it wont work, boots up in Japanese or maybe arabic and wont let me do anything, was working OK before the download, Itunes says "no sim card present"
Please help

Keep trying. The update server is overloaded. You will eventually get through and your update will continue where it left off.
I got the error message about 12 times before it finally connected and continued.

Key pad and trake pad wont work

Similar Messages

Maybe you are looking for