Key Points in SAP MM

hi everyone
can anyone suggest me on what are the key points that needs to be mentioned in sap mm consultant resume.

Ok am going to tell you the most important key point in your MM resume.
Just be honest and add only what you are aware of in your resume. If you feel there are few important points which will enhance your opportunities, learn them first and then add them to support the statement you added in your resume.
P.S - You can use this key point in any resume. Not only MM
Vikranth

Similar Messages

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Set value to attribute created in other enh. point by SAP

Hi all,
I'm modifying a standard component, I've created an enhancement point and a post-exit in some methods. Within this methods I want to read/modify the value of one attribute that is created in other enhancement point by SAP.
I've tried to read this value using the code wizard but when I try to use it the following message is displayed:
"This element cannot be selected in enhancement mode ZZZ..."
I've written the code by hand but when I try to activate it there is a syntax error, because don't find the type of this element...
I don't know if exits any way to do it.
Thanks in advance.
Regards,
Ricardo.

Hi JhonSnow,
Thanks for posting in MSDN forum.
This issue would be better post to
windwos desktop debugging forum, I will move this issue to there for better support. Thanks for your understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creating second InfoView entry point for SAP users in XI 3.1

Hi All,
I have BOE XI 3.1 up and running with the Business Objects Integration kit SAP Solutions kit I would like to create a second infoview entry point for SAP users on the same physical box (single server) as regular InfoView.
I am trying to mock this up and have detailed the following steps below. I suspect I am missing a few steps (for example, where do I specify the entry port?). I am sure step 2 is wrong, as I the desktoplaunch no longer exists in Xi 3.1
1. Copy the InfoView.war file to a new directory ( Program Files/Business Objects/ Business Objects Enterprise 12.0/java/applications/sap). I imagine I would need to rename the war file (say SAPInfoview.war)?
2. Create a xml file with the following logic (the part in bold I consider to be wrong...):
<Context docBase="Program Files\Business Objects\Business Objects Enterprise 12.0\java\applications\sap\SAPInfoview.war" path="/
businessobjects/enterprise115/desktoplaunch"
crossContext="false" debug="0" reloadable="false"
trusted="false"/>
3. Save the xml file (what name? does it matter) in Program Files\Business Objects\Tomcat55\conf\Catalina\localhost
4. Restart Tomcat
5. Change the web.xml to make SAP security the default. But this should not be the regular infoview web.xml. I'm not sure where this would reside.
Thanks,
Steve
Edited by: Steve Bickerton on Jan 15, 2009 9:19 PM

Hi Ingo,
You've been working with Duncan and Sartaj on this. The client has two set of users: non HR which has no BW or R/3 authorization restrictions, and HR, which has authorization restrictions.
They have deployed SSO using AD for the non HR users. They also want to leverage InfoView rather than the SAP portal. For the HR users, we therefore need to capture the SAP id and password at login time to enforce security at the BW and R/3 levels. We could use the existing Infoview entry point (SSO will fail and they will be prompted for a SAP login). I do remember that we offered a second InfoView entry point for SAP users in XIR2. I thought this may be more elegant.
Thanks,
Steve

What is the best way to follow the scenario for Out look integration with share point using SAP Gateway?

1)what is the best way to follow the scenario for Out look integration with share point using SAP Gateway?
2)workflow concepts for Purchase order?
3)Email triggering from out look for an approval process of PO? how these scenario can be best implemented with updated functions in Duet Enterprise.

Hi,
I do not have much idea on gateway integration with outlook but found out this document GWPAM Workflow Template which can be helpful for you to start with.
also you may want to post your question in SAP Microsoft Interoperability forum
Regards,
Chandra

HT201442 I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

Error 3194:
This device isn't eligible for the requested build
It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again.

Regarding Triggering Point in SAP FI_MM,SAP_SD

Can anybody explain what is theTriggering Point in SAP FI_MM,SAP_SD ?
Thanks

Hi,
follow the link below for details on integration
[http://www.sap-img.com/financial/integration-of-fico-with-other-modules.htm]

Cannot open Registry key HKEY_LOCAL_MACHINE\Software\SAP\NSP\Environment ?

Hello, after installing the NetWeaver 7.01 Trial on my Windows Server 2008 I get this error:
Cannot open Registry key HKEY_LOCAL_MACHINE\Software\SAP\NSP\Environment (Error 2 ENOENT: No such file or directory OR: The system cannot find the file specified.) [ntservmgr.cpp 306]
Starting the server does not work, it goes from grey to yellow to grey again and I think the above error is the cause. Whats the problem?
Thanks !

Thank you Srikishan, I reviewed the link you provided, it solves uninstall and re-install problem for one laptop, however, we have many laptops, can't do manual registry clean up for all of them. The installation was done by mobile client silent script, needs to be successful the very first time.
This error only happens with the very 1st installation, means fresh OS that never had any SAP, I am wondering what is the installation program trying to change in the registry, does it have to go that deep into registry? and what other components are affected by the error "Can't open registry key "HKEY_LOCAL-MACHINE\SOFTWARE\SAP\SAP DBTECH"?
From the log, the command ran before the error was "CALL: SDBINST -b -t sapmc -f C:\Program Files\SAP Netweaver Mobile Client\MaxDB Files\sdb_MIDB_sample.cfg", is it a sample program and do we need it? is this caused the error?
for remaining errors(many of them), there is one very odd
"SYS: "c:\sdb\programs\runtime\7300\bin\irconf.exe" -i -p "c:\sdb\programs\runtime\7300": Error : Cannot find any installed version of CPC Driver.."
What caused it?
Thanks,
Grace
Edited by: Grace Mu on Jul 25, 2011 4:34 PM
Edited by: Grace Mu on Jul 25, 2011 4:37 PM

The relevance\purpose of shipping point in SAP SD

what is the relevance\purpose of shipping point in SAP SD?hat

Hi,
In addition to the above,
A delivery is always initiated from exactly one shipping point. Thus, all items of a delivery belong to one shipping point. Groups of deliveries also belong to exactly one shipping point.
The shipping point can be proposed automatically during order processing depending on the plant, loading group and shipping condition.
The shipping point is used as a selection criterion for lists of deliveries and the work list deliveries.
The shipping point is used as a selection criterion for processing deliveries like printing, picking or goods issue.
Prase

Key Point In Mail

In Outlook you can do indented key points when typing an email, like you can do in word. How can you do these in Mail? It doesn't seem to have many features for writing an email...

No one have any ideas?

How to find the Access Key of Standard SAP Function Module

Hi Experts,
I have to change one sap standard function module.
so how can i know the access key for that function module.......
Regards,
DS

Contact the Basis Consultant in your project.
The access key for standard SAP objects can be obtained from service.sap.com under Keys and Requests.
Note 86161 - Registering developers and objects

I am getting error messages when keying entries into SAP in transaction cod

I am getting error messages when keying entries into SAP in transaction code F-02. It will tell me that an asset doesn't exist in the company code I am posting to when the asset does exist. For example in the parked document 101079622 it tells me that asset WV0707711 doesnt' exist in CoCode . But what is keyed in the document is WV07077 1 1.
And when i look in Transaction AS03 for this asset number it does indeed exist in Co Code. Also if you take these assets out and park it and then go into Transaction FBV2 and add the asset back into the document it will add it and then post to it. This happens often and is very time consuming. I need to know how to fix this without all this additional effort

Hi,
it is urgent can any one help on this.
Thanks,
Sridhar Reddy.G

Key Point Indicators (KPI)

What is a Key Point Indicator (KPI)?
Anybody can give me idea about KPI.
Thank You

hello mite..
KPI = "Key Performance Indicator" not Key Point Indicator. these r basically reports or dashboards or graphs, which helps the higher management to make decisions. these r nothing but formatted data to analyze the day to day performance of the business like finance, profit & loss, sales n mostly for comparing the figures like comparing this weeks sales to last weeks or the same week in last year.
hope u got it..
thanks& all the best.
_Rakesh Reddy.

Problem with Foreign Key relationships in SAP R/3 4.7

Hi Experts,
I am trying to create a foreign key relationship between 2 transparent tables in SAP R/3 4.7
Table 1:ZAAVNDR (MANDT (pk), VENDORNO (pk), NAME, REGION, COUNTRY (fk)) Foreign Key Table
Table 2: ZAAVNDRREF(MANDT(pk), COUNTRY (pk)) ---Check table
I have added few valid countries in check table but when I am adding some records in foreign key table with invalid countries these records are not being restricted and are still successfully going into the table.
Could any one please help in this.
Thanks in anticipation.
-Amit

Hi Sandra,
Many thanks for your response and providing time of yours.
Now, I have done exactly the same thing, but still it is the same.
I have created two new tables as below:
ZAAVREF (Check table)
MANDT (PK)
COUNTRY (PK) Domain:ZAACOUNT (CHAR 10)
ZAAV1 (Foreign key table)
MANDT (PK)
COUNTRY (PK) Domain:ZAACOUNT (CHAR 10)
Then I have created FK on country of foreign key table ZAAV1 and then SE16 (for table ZAAVREF)->Create Entries-> Entered values for Country only->Save....Records entered with valid Country values.
After that SE16 (for table ZAAV1)->Create Entries-->Entered an Invalid country->Save->Still the record entered to the Database successfully....
Could you please let me know where I am going wrong.
I am using SAP R/3 4.7 and creating tables using Tools->ABAP Workbench->Development->ABAP dictionary

Key Points in SAP MM

Similar Messages

Maybe you are looking for