Key Sensitivity Issue

My "s" became very sensitive. It reacts immediately even with a slight touch, before the actual "click" of the key......
So when I press the "s", I get most of the time "ds", “ws” and “as”………any help would be appreciated!

Restart your phone to see if that corrects the issue. Press and hold your power button for about 15 seconds until you see BlackBerry on the screen, ignoring anything that appears before that.
Do that and post back with your results. Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

Inserting & Deleting in Trees?? Time sensitive issue

We have a tree that is populated with information linked to a client. When the user clicks on a node, it populates a block to the right with that data. Then the user can manipulate that data on the block to the right. If the users inserts a new record in the block on the right, in the key-crerec trigger for that block, I am also inserted a node into the tree with "[] New Item" as the Label and "0" as the value. My question is how do I delete this node if the user decides not to save. For example, they insert a new record, fill in all the data and then click on another node in the tree (to see it's data). The form pops the message "Do you want to save your changes?" (this message is coming from FORMS not me. If the user says "No". The record is not saved but the node still appears in the tree. Where do I put the code to delete the node?
Any help would be greatly appreciated. This is a time sensitive issue.

Just a guess (never did that before) - servlets are server-side code. As you already suspected, it's looking for that c:\... file on the server, not on the client. Shouldn't you instead get the upload (input) stream from the request?

Case Sensitivity Issue with Latin Characters

Hi,
The Latin Character that i am talking abt is "i",
I am trying to provide in my application the support for Azeri-Latin(Turkish family) Characters,
That is the display and the orientation of characters is perfectly fine throughout the flow of application.
But now there is a problem when selecting a data from DB using like constraint in where clause... The issue has been elaborated below...
From the set of characters there are two character in which i am facing Case Sensitivity issue...
They are as,
i ---> the capital of same is ---> İ
ı ---> the capital of same is ---> I
now in english character mapping,
for i ---> the capital is ---> I
So, this is creating an issue...
Now the test i have done is as follows,
I created a table as,
Create Table CS
CS1 VARCHAR2(20)
Following is the data that is inserted in the table,
Insert into CS values('İ');
Insert into CS values('i');
Insert into CS values('I');
Insert into CS values('ı');
now i am running the following query,
Select * from CS where lower(CS1) like lower('%&a%');
for characters "i","İ","I" it returns 3 rows, that are,
i
İ
I
and for character ı it only returns,
ı
ideally for characters "i" & "İ" should be mapped with each other and "ı" & "I" should be mapped with each other respectively.
But that is not the case.
I am using Oracle 10g
my NLS_database_parameters are as follows,
PARAMETER     VALUE
NLS_LANGUAGE     AMERICAN
NLS_TERRITORY     AMERICA
NLS_CURRENCY     $
NLS_ISO_CURRENCY     AMERICA
NLS_NUMERIC_CHARACTERS     .,
NLS_CHARACTERSET     AL32UTF8
NLS_CALENDAR     GREGORIAN
NLS_DATE_FORMAT     DD-MON-RR
NLS_DATE_LANGUAGE     AMERICAN
NLS_SORT     BINARY
NLS_TIME_FORMAT     HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY     $
NLS_COMP     BINARY
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSE
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_RDBMS_VERSION     10.2.0.1.0
and at client i m using,
NLS_LANG = .AL32UTF8
any help on this issue will be appreciated,
Thanks & Regards,
Pratik

I'm not fully understand your question but I guess you may need to set up NLS_LANGUAGE, NLS_TERRITORY db parameters and client NLS_LANG.
eg client NLS_LANG=TURKISH_AZERBAIJAN.AL32UTF8 and db parameters NLS_LANGUAGE=TURKISH, NLS_TERRITORY=AZERBAIJAN
Full list of supported languages, locales see [Oracle® Database Globalization Support Guide local data subpage|http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/applocaledata.htm]
or tip2: check this: ALTER SESSION SET NLS_COMP=LINGUISTIC;
Edited by: Kecskemethy on Mar 24, 2009 3:14 AM
or you need something like this:
Example 5-16 Matching with the Base Letter Operator [==]
Expression: r[[=e=]]sum[[=e=]]
Matches:
resume<<
résumé<<
résume<<
resumé<<Oracle SQL syntax: SQL> SELECT col FROM test WHERE REGEXP_LIKE(col,'r[[=e=]]sum[[=e=]]');Edited by: Kecskemethy on Mar 24, 2009 3:20 AM

Key shortcut, issue, typing something in editing code and changing language going directly to snippets.

Key shortcut, issue, typing something in editing code and changing language going directly to snippets.
So the problem is that I have to click in the editing code again to write in different language, which it didn't happened before.
Just in case of shortcut keys collision I completly removed the shortcut of snippets from shift+F9, nothing changed. I really can't understand why when I press Alt+Shift to change language it goes straight to the snippets.
If anyone can help would save me from nervous breakdown!
Thanks,
GKD

Since this appears to be a "just started happening" issue, have you tried clearing the program cache?
Deleting a corrupted cache file
That tends to catch a lot of weird behaviors and straighten them out.

Latitude e7450 - Repeating Keys/Debouncing Issue is present in this model too

Not sure how to get attention to this, as I do not think Dell is aware of this problem since this model was only released a month ago. The repeating keys/debouncing issue described here , is present in this new model Latitude e7450 in both bios A00 and A01. Please make this bug known, so that Dell is able to fix it in a bios update!

So, I also found and posted in this thread about the issue with the E7450
and basically that is the aggregation of all the posts on this repeating keys/debouncing issue on ALL affected models. Honestly as a developer, I'm pretty shocked at how bad Dell support really is. I've been lucky enough to never have any hardware issues until now...
They chose to have a forum for their customer service, fine; that works with many other companies. But they should have at least split the forums into laptop series,by model number, have a bug tracker and paid more than 1 guy to relay issues to the engineering team.. This is ridiculous and utter chaos reading through these threads and it is enough to make me question buying a high priced Dell ever again. Like many people I went with Dell Latitude after Lenovo created that awful macbook-like clickable touchpad, but it looks like their 2015 models are bringing back hardware left/right click buttons again so that might be my next purchase.

Serious Keyboard Key Mapping Issue

Hi there everyone...
Yesterday evening, while i was watching a movie on my Macbook, i accidentally pressed the command button, and all of a sudden the movie stopped playing.
After some research on the internet, I activated the keyboard palette, and found out that several keys had issues
1. The left command button behaved as if i was pressing command + . (period key)
2. The right command button behaved like command + up arrow key
3. The up arrow key like issue 2 above
4. The period key like issue 1 above
p.s. the up arrow and period keys arent working at all, they just behave as i explained above
Since it had to do with a modifier key, i tried to change the modifier key settings, but even though i tried accessing the modifier key settings through preferences, no pop-up window opened and no change could be made.
Even though i tried a PRAM zapping, nothing happened because as i understand it, the system doesnt recognise the shortcut, since together with command,option,p,r, the period key is seen pressed as well.
If anyone can help please do!
Thanks for your time everyone,

So I booted from the install disk.... Didnt now what exactly to do, so i use the terminal to see if the problem with the keys persisted... And unfortunately it did.... Didnt know what to do next so i quit and booted again...
But i restarted my macbook, only to boot into hardware test mode, to see if the problem really is on hardware side.
I am running an extended test, but poking around a bit, i noticed that the up arrow key worked fine...
Waiting now to see the results from the test, which i will post after it's finished.

Case sensitive issue CF7 & SQL 2005

I had to rebuild a database from a backup recently. Now I am having a case sensitive issue in my queries that I did not have before.
The following use to work with Rockmart in lowercase even though Rockmart was in the table as all uppercase like so ROCKMART.
<cfquery name="updateAreas" datasource="mySource">
   UPDATE Property
   SET AR = 3610
   WHERE City = 'Rockmart'
</cfquery>
The above has stopped working now the query must specify ROCKMART because it is in the table in all upper case.
My database option is set to SQL_Latin1_General_CP1_CI_AS
Any ideas.
Many thanks for you help.
Brian

A collation can be specified at the server, database, and column level in SQL server. The column collation will take precedence over the database collation. Check that the collation for the column is case-insensitive. You can use the query below to get the column's collation.
SELECT COLUMN_NAME, COLLATION_NAME
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'Property'
    AND COLUMN_NAME = 'City'
You can get info on the collations supported by SQL Server at:
http://msdn.microsoft.com/en-us/library/ms144250%28SQL.90%29.aspx
You can change a column's collation if you need to, but you should be sure that this will not affect any other applications which query the same data. Another option is to specify the desired collation in your query as suggested by glynjackson.
http://msdn.microsoft.com/en-us/library/ms190920%28SQL.90%29.aspx

KEY PRESS ISSUES

I own a Pre Plus on Verizon. I have read the numerous posts describing issues with keyboard key press difficulties. What I haven't seen, is any resolution to the problem. Personally, The keyboard size is OK. The unreliable key press issues are driving me nuts. The worst key on my Pre+ is the "e" key and some others, mostly on the top row of keys. I first press, nothing, press again, maybe nothing or multiple entries of "e", The "y" is second worst. Same issues. Is ANYBODY doing anything to resolve this problem?
Post relates to: Pre Plus p101vzw (Verizon)
This question was solved.
View Solution.

The last software update 1.4.11 addressed this issue on the Verizon Palm Pre Plus. If you are on earlier software version you need to update your device to the latest SW version. If you are on the latest SW version you may have a hardware problem with the device. You should go to Device Info from your launcher, tap the drop-down menu, choose Tests, then Interactive Tests, then test your keypad for problems. If this test fails then you should get a replacement device from Verizon.

Wacom / Bamboo CTL-470, Sensitivity Issue After 4~ secs

Hey guys.
I'm using a Bamboo CTL-470 tablet that has a pretty significant issue that does not exist in Windows (this is a dual boot system and I've tested it just this morning to confirm). After installing using https://bbs.archlinux.org/viewtopic.php?id=131831 to install the tablet, I can confirm the tablet does indeed work in X. This can be shown using MyPaint, Gimp, even using the tablet as a mouse temporarily.
The only problem that I cannot dodge seems to involve the sensitivity. It seems every four to five seconds when drawing a straight line the tablet completely loses it's ability to make a mark for all of a split second, and then it begins writing again at a much less sensitive rate.. which, it's worth noting, I haven't changed how hard my pen is pressing on the tablet at this point.
I'm not sure how else to describe it other than the above, but I can tell you it makes drawing virtually impossible if you're wanting long, smooth lines.
I can tell you this seems to be a sensitivity issue because if I disable sensitivity and try drawing with it as a sketch w/ no differences in how hard the pen is being pressed, the pen continues writing smooth, long lines.
Having top running while MyPaint is going shows python 2.7 is running around 9% CPU while the tablet is in use. And it doesn't seem there are any other processes that would give issue every four to five seconds.. ??
I'll try about anything to prevent logging back into Windows just to draw. Any suggestions?

Okay, totally not sure whether or not to mark this 'solved' because this does indeed help the sensitivity issue, but there's another problem that is worth talking about.
Since using this wacom.ko and installing it (like mentioned in another Wacom thread I've been replying to), it seems suddenly the mouse in X / KDE 4.8 goes absolutely haywire and shoots to the left side of the screen, and the tablet will work but then the mouse will shoot off to the left side again. The only fix to this I'm aware of for the interim, interestingly, is by hitting CTRL+ALT+F1 and then CTRL+ALT+F7 to come back to X, which the mouse and tablet both function normally again.
Besides the fact the screen also goes absolutely haywire and shoots through all of the virtual desktops (I've 4 of them), Yakuake reports an up arrow ASCII being sent over and over and over.
In an hour period, the tablet causing the mouse to go crazy has happened automagically without my input four times. I don't seem to do anything to trigger it, either.. the mouse just kind of randomly starts going nuts.
Does this happen to anyone else? Suggestions to fix it?
** EDIT: The QPainter issue was not related to this, therefore it's removal from this thread is required. One word: QMMP.
Last edited by Caliburn (2012-02-14 19:57:46)

Weird key framing issue

With Flash MX.
I'll hit F6 to insert a keyframe (but the same issue occurs
if I do it the long way) The key frame appears white on the time
line as if I'd entered a blank keyframe. The image is still there
but I can't move it around or anything. I'll click and drag it and
the square moves but as soon as I let go of the mouse it snaps back
where it was. I tried working around it by purposely inserting a
blank key and then reimporting that image but the same problem
occurs. The time line looks empty even though there's clearly
something on the stage but I can't manipulate it. I assumed this
was just a glitch but I restarted my computer and the same problem
persists. I can even back track to earlier on my time line and
insert keys and everything like normal but anything beyond that
last working key goes wonky. I've been working for a few hours now
and this has only just started happening.
Maybe it's a weird setting that I accidentally turned
on?

I may have to test this on my machine but it may be that the filename that got pass the filter was in uppercase maybe and that's how it sneaked through. Your filter looks for only lowercase filenames that end with ".wmv".
The only thing that is case-insensitive by default is the "mail-from" and "rcpt-to". Almost everything else (subject, message-body, other-headers, filenames) are case sensitive. To make these things case insensitive, you'll want to prepend your filter with this:
Attachment-filename == "(?i)\\.wmv"
or
Attachment-filename == "(?i)\\.(exe|bat|com|sh)"
(?i) --> means ignore the case on whatever follows this regex. You pretty much want to use this in most cases to be safe since match whether it's upper or lowercase. Performance-wise, it should be okay.
By the way, Ironport filters use Python regex.
Again, I'll have to test this on my side.
I have had a weird issue come up with our content filtering today, and am wondering if anyone else has come accross it.
We have a number of Content Filters setup. One of these it looking for various media files including .wmv files (We have used a "Attachment-filename == "\\.wmv"" to look for them).
This works as required. However this morning out outbound Media File content filter trapped a message containing a wmv file going out that had been received by the user the night before.
this message last night was processed by the IronPort, the wmv was not hidden or re-named in any way. It was just not stopped by the content filter.
I have checked everything I can think of and I can see no reason why the message wasn't stopped. WMV's are being stopped OK as I type this.
Has anyone else come accross or noticed this.
This is on a C650 Appliance running 5.5.1

IPod 5th generation screen touch sensitivity issues?? Lack of sensitivity!!

Hello all! I am just wondering if anyone else has issues with the sensitivity of their screen to touch? I have to tap my screen multiple times especially along the edges or if the buttons on the screen are smaller. The Airplane mode one is tricky for me.
I play a game called CSR Racing and find that sometimes the buttons don't respond well.
Is anyone out there having any issues with their screens? Should I be worried and call Apple? It gets annoying when you have to tap multiple times or have your finger tip positioned just right.
Post up if you have any issues at all, thanks!!

I've noticed this, too. I have new iPod touch 5th generation. Where I find it troublesome is in something like Contacts or Music. When I am looking for a contact or a song and the list of letters A-Z shows up on the right hand side, I have a to tap a letter several times before I get any response. I wasn't sure if this was a hardware or software problem, or if the letters are so small that my finger hits too many at one time. Then I noticed that when I am relaxing with a game of Solitaire, the cards along the right edge of the screen often won't respond on the first tap. I am curious about this, too. Otherwise I am pretty happy with my new iPod.

Screen sensitivity issues

I'm having a problem with the screen sensitivity on my iPad. There seems to be a certain area on the screen that is dead to the touch. When I try to file up or down in that area it won't work. But if I move over a bit, my touch is then recognized. Sometimes the screen recognizes a down movement but not an up movement. I've checked to make sure the screen is clean and have done a hard reset, which doesn't seem to help. But in writing this, I've found no dead spots. It only seems to be fileing up or down.

I've had a similar issue, was interested to hear of your solutions and will try a restore but doubt it will work because I've had this problem for as long as ive had the ipad. Would be interested to hear how you got on VadimM please.
It first came to my attention when I was on the main screen and trying to reposition certain apps by dragging them across the middle of the screen. Apps on the right of the screen do not drag easy/at-all across the middle part to the left of the screen and vice-versa.
The same has happened in games and apps, for instance Words with Friends there are certain places I just cannot drag a tile to.
When I was using iAnnotatePDF and mucking around with the drawing tool testing this, I couldn't draw a circle (broke in the middle) and couldnt draw a line through that difficult area.
For some of the time I am lucky enough to be able to switch to portrait (or landscape) and reposition the material on the screen so that I am clicking in a different part and avoiding the middle of the screen, but the problem is becoming annoying.
Thanks, anyone else have this problem and any other solutions out there or is my ipad faulty?

FV11 key combination issue - Materials - Services

Hi MM experts,
I am having problem while making the PO - Services.
We are separate POs for material & services.
FV11 key combination maintained for Materials : Plant/Vendor/Material
FV11 key combination maintained for services : Plant/Vendor/Materail Group
While making PO- Material, If select V1- Taxes conditions are coming - which is required & right
                                           If select V0 - Taxes conditions are not flowing
While making PO- Services, If select V1- Taxes conditions are coming & taxes are flowing in PO - which is required & right
                                           if select VO - then also same conditions are coming & taxes are flowing in PO
here my requirement is why services PO the V0 - taxes & tax conditions are flowing as maintained in FV11 key combination
pl help in arresting the Services-PO - Taxes & Tax conditions should not flow when we select V0.
thanks & regards
Srihari

hi
I think my query is not clear, i repeat the same.
1. I am maitaining Fv11 for Vat i.,e JVRD conditions, this will be triggered when i use V1 in while making PO- Materials, all the tax values ie., Vat amount is flowing in PO,
If I select V0, then the tax conditions are not flowing and values are nil. PO- Materials, all the tax values Nil, and the po value is without any Vat amount.
2. Similarly, I am maintaining FV11 for service tax ie., JSRT -10%, JEC1-2% & JSEC-1%, this will be triggered when I use S1 in while making PO-services, all the tax values ie., service, ec, sec cess amounts are flowing in PO.
If is select V0, then also the tax conditions are flowing in PO- services, all the tax values ie., service tax, ec, sec cess
I want the PO-Service, without any taxes, when I select standard Tax condition V0.
Pl suggest, do we have separate tax conditions for materials & services, meaning
V1 - taxes to flow in PO- Materials
V0 - Taxes not to flow in PO- Materials
S1 - Services taxes to flow in PO- Services
S0 - Services not to flow in PO- Services   -
> this is to be created new??????????
pl advise, how i over come the issue of services taxes flow in PO-Services.
pl help
thanks & regards
Srihari

Key date issue

hello,
I am having a scenario where I am having two Info objects 0VALIDFROM and 0VALIDTO date info objetcs. requirement is that if i give a key date. It should check both the dates in record and if it lies in between of 0VALIDFROM and 0VALIDTO date then it is displayed in Bex output.
Can you suggest how to achieve that.

Hello Vineet,
I am pasting the code for your refernce. But i am getting while executing I am getting the error.
ATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: l_t_var_range LIKE RRRANGEEXIT.
Case I_VNAM .
WHEN 'ZVLFRSLR'. " Valid From
IF I_STEP = 2.
READ TABLE i_t_var_range INTO l_t_var_range
WITH KEY
vnam = 'ZEDT1SIR'. " Key date Var
IF sy-subrc = 0.
l_s_range-sign = 'I'.
l_s_range-opt = 'LE'.
SHIFT l_t_var_range-low LEFT DELETING LEADING space.
l_s_range-low = l_t_var_range-low. " user entered value
" for End Date
APPEND l_s_range TO e_t_range.
ENDIF.
ENDif.
Valid To is set to >= Key Date formula variable ZEDT1SIR
WHEN 'ZVLTOSLR'. " Valid To
IF I_STEP = 2.
READ TABLE i_t_var_range INTO l_t_var_range
WITH KEY
vnam = 'ZEDT1SIR'. " Key Date Var
IF sy-subrc = 0.
l_s_range-sign = 'I'.
l_s_range-opt = 'GE'.
SHIFT l_t_var_range-low LEFT DELETING LEADING space.
l_s_range-low = l_t_var_range-low. " user entered value
" for End Date
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIF.
Can you please suggest what is the issue. It is saying that no value can be derieved for variable ZVLFRSLR. Then it is disconnecting from BW. I have created key date varaiable with input from user entry with the same technical name.

Curious key binding issue with Openbox

I'm learning about setting up key bindings for actions in Openbox. One of things that I wanted to do is to have the root-menu and client-list-combined-menu set to keyboard shortcuts. This part I borrowed from a post in the forums and it does exactly what it's supposed to do:

<keybind key="W-z">
<action name="ShowMenu">
<menu>client-list-combined-menu</menu>
</action>
</keybind>
<keybind key="W-x">
<action name="ShowMenu">
<menu>root-menu</menu>
</action>
</keybind>
The issue comes when I don't want to select something in the menu. Esc will clear it just like it should. But, The Caps Lock key on my system which is remapped to Esc won't. It works like an escape key everywhere except here. Any ideas on why?

Inxsible wrote:Does this happen only in the vim window ? ...
No, it happens all the time. It can be the first thing that I do when the computer boots, and it still doesn't work the way that I'd expect.
If it helps, this is what xev is reporting for Escape:
KeyPress event, serial 35, synthetic NO, window 0x1200001,
root 0x13b, subw 0x0, time 23124448, (89,89), root:(1163,782),
state 0x10, keycode 9 (keysym 0xff1b, Escape), same_screen YES,
XLookupString gives 1 bytes: (1b) "
XmbLookupString gives 1 bytes: (1b) "
XFilterEvent returns: False
KeyRelease event, serial 35, synthetic NO, window 0x1200001,
root 0x13b, subw 0x0, time 23124600, (89,89), root:(1163,782),
state 0x10, keycode 9 (keysym 0xff1b, Escape), same_screen YES,
XLookupString gives 1 bytes: (1b) "
XFilterEvent returns: False
And for Caps_Lock:
KeyPress event, serial 35, synthetic NO, window 0x1200001,
root 0x13b, subw 0x0, time 23132024, (89,89), root:(1163,782),
state 0x10, keycode 66 (keysym 0xff1b, Escape), same_screen YES,
XKeysymToKeycode returns keycode: 9
XLookupString gives 1 bytes: (1b) "
XmbLookupString gives 1 bytes: (1b) "
XFilterEvent returns: False
KeyRelease event, serial 35, synthetic NO, window 0x1200001,
root 0x13b, subw 0x0, time 23132144, (89,89), root:(1163,782),
state 0x10, keycode 66 (keysym 0xff1b, Escape), same_screen YES,
XKeysymToKeycode returns keycode: 9
XLookupString gives 1 bytes: (1b) "
XFilterEvent returns: False

Key Sensitivity Issue

Similar Messages

Maybe you are looking for