Key signatures in scores - unwanted automatic duplication

I have two tracks, each with piano style score. If I change the key signature of one track, the key signature of the other is automatically changed to match the first. Is there some way I can have two different key signatures on the two tracks?

The reason you cannot do what you want to do is because you are probably doing different exercises in the same document on tracks which are at the same time.
Logic being a linear sequence assumes that if you are in C at minute 1 in a particular document, then all the other tracks below will be in the same key - unless you are using transposing instruments.
You have two solutions:
1) Either create a differennt document for each exercise per key
2) Or put all the exercises on 1 track in a linear way and change key as many times as you like
(FWIW this is exactly what I do as I often use Logic to make up exercises in all keys)
HTH
Music Spirit

Similar Messages

Score: Key Signature problem

I am working on an orchestral score that is in Concert-B (5 Sharps). I have created a staff style for my Bb Clarinets (can't use A Clarinets) which has a +2 transposition. Logic automatically transposes the written part up two half steps, showing the key signature of C# major. All that is fine and working well.
My problem is this: I'd like the Bb Clarinets' staff to display in Db instead of C#. Does anyone know of a way to have most staves in B but the Bb Clarinets staff in Db?
Rohan, Ashermusic, iSchwartz, I need your help on this one!
Thanks in advance,
Mitch

Mitchell Turner1 wrote:
There is a "Minimize Transposed Accidentals" check box in the Project_Settings>Score>Clefs&Signatures preference pane. By checking that box, the key signature of C# (7 sharps) was flipped to Db (5 flats).
Many thanks - this is extremely useful to know - I had the same problem some months back with some horn parts but did not know that Logic could do this to the whole key signature of a transposed part. I thought this function applied only to the odd accidental
PS you may be interest in contributing to the Score Editor wish list thread on:
http://www.logicprohelp.com/viewtopic.php?p=176776#176776

Applying different key signatures

I'm a "switcher" from Cubase to Logic Pro 7 and after a long way trying to apply a different key signature to a midi region or even only a few notes, i didn't find a (comfortable) solution. I already tried the Transposition Track, where you could do this, but it didn't affect the desired midi track or region. Then I looked at the Time and Key Signature Editor and changed the Key Signature several times. I watched simultaneously the Notes in the Notation Editor, and actually there could be seen the transposed notes. But no changes are to hear (in a looped region played by EVP 88). What's wrong? Thanks a lot in advance!

BTW .. another way to transpose is to use Functions/Transform/Transpose in the Matrix Editor.
I think I understand better what you mean.
In the arrange window double click any region. As you know this opens the matrix editor for the track (provided you didn't change that in your preferences ... if you did .. use the pull down or command key). Double click again and this shows the matrix editor for all MIDI.
Enter Cmnd A for all notes and drag up or down to re pitch everything. All MIDI notes will move up or down.
IF there are MIDI tracks you don't want to repitch (ie drums etc) make sure the no transpose box is checked for those tracks before doing this so that only harmonic and melodic content is re pitched.
RE changing modes from major to minor. I don't know if this can be done. I know you can select a key (and many are on offer) and limit MIDI input to diatonic in the score window ... but I don't know about changing modes after input. Good question. You may have to manually go in to change the 3rds, 6ths and 7ths etc depending on what kind of minor key you are looking for. Even if there is an automatic way to change you would likely have to fine tune many of the automatic note changes anyway.
I will search this because I am curious and will get back if I find anything. I am sure someone on here knows about this though and will get back sooner if it's possible.
Hope that helps./
Cheers
Dee

Tracks with Different Key Signatures

I posted a slightly re-worded version of this question earlier, but realized that I didn't ask the question correctly. So here's a second try. :-)
My 14-yr old son is writing an arrangement of Rebecca Black's "Friday" for his middle school marching band. :-) When the score is printed for each instrument, he wants the proper key signatures to be used for each respective instrument. For example, some instruments might have their score in C, and another (trumpet) might be in B-flat.
Is this possible in Logic Express? I mistakenly thought that simply transposing the track would do the trick, but my son just explained to me how simply transposing wouldn't work. :-)
Thanks!

It is possible to do this in the score window. All the instruments should start in concert key, but then in the score window the correct clef for each instrument can be selected. This has to be done for each region on a track. The notes will shift automatically to match the chosen clef.

Change vendor evaluation with new scores for automatic criteria

Hi,
I would like to delete actual vendor evaluations and revaluate my vendors with new scores for the automatic criteria on time delivery.
Using the program RMEVALDL doesn't work.
Does somebody have a suggestion please ??
Thanks in advance,
Kind regards

hi,
Points scores for automatic subcriteria: The intervals for the automatic subcriteria used must be maintained, otherwise nonsensical scores may result. In addition to the F1 documentation, you should take account of SAP Note 51054. The limit values -99.9% and 99.9% must be maintained. Similarly, the invisible limit 0 must be observed.
Variance             Score
-99.9%               1
+99.9%              100
A variance of 0% brings the vendor 100 points, whereas a variance of -1% results in a score of 1 point.
check the following link.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/KnowledgePaperVendor+Evaluation
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
regards
sumit simran

Where can i set a "signature line" to load automatically on text messages?

where can i set a "signature line" to load automatically on text messages? I notice there'a a default ("sent from my ipad"), but where can I edit that?

This is not user settable option in iMessage on iPad.

My volume key not working volume increase automatically, how to mute all audio

my volume key not working, volume increase automatically if i go to audio settings i can adjust, but again volume increase automatically , how to mute all audio

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comeback again?
If this does not boring back a working volume control, and to rule out a software issue, set it up as new device, explained here:
Use iTunes to restore your iOS device to factory settings - Apple Support
If still no luck, you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
iPhone - Contact Support - Apple Support

Encode shared key signature in Azure Storage Queue

I'd like to use Azure storage REST api for queue, and in order to add the authentication infomation to the http header, I have to get the shared key.
From http://msdn.microsoft.com/en-us/library/azure/dd179428.aspx, I saw the string to sign like this:
I found it was very strange, I prefer it's C# code, and some place "\n" missed and so is "+", as I made up all stuffs, the authentication still failed, I do not know why, here is what I did:
using (var httpClient = new HttpClient())
var verb = "PUT";
var contentEncoding = "";
var contentLanguage = "";
var contentLenght = "0";
var contentMd5 = "";
var contentType = "text/plain; charset=utf-8";
var date = DateTime.UtcNow.ToString("R", CultureInfo.InvariantCulture);
var ifModifiedSince = "";
var ifMatch = "";
var ifNoneMatch = "";
var ifUnmodifiedSince = "";
var range = "";
var canonicalizedHeaders = "";
var canonicalizedResource = "";
var stringToSign = verb + "\n" + contentEncoding + "\n" + contentLanguage + "\n" + contentLenght + "\n" +
contentMd5 + "\n" + contentType + "\n" + date + "\n" + ifModifiedSince + "\n" +
ifMatch + "\n" + ifNoneMatch + "\n" + ifUnmodifiedSince + "\n" + range + "\n" +
canonicalizedHeaders + "\n" + canonicalizedResource;
httpClient.BaseAddress = new Uri(string.Format("https://{0}.queue.core.windows.net", accountName));
httpClient.DefaultRequestHeaders.Clear();
httpClient.DefaultRequestHeaders.Add("Authorization", string.Format("SharedKey {0}:{1}", accountName, Hash(accountKey, stringToSign)));
httpClient.DefaultRequestHeaders.Add("x-ms-date", date);
var result = httpClient.PutAsync("myqueue", new StringContent(""));
result.Wait();
static string Hash(string message, string secret)
var messageBytes = Encoding.UTF8.GetBytes(message);
var secrectBytes = Encoding.UTF8.GetBytes(secret);
using (var hash = new HMACSHA256(secrectBytes))
var hashMessage = hash.ComputeHash(messageBytes);
return Convert.ToBase64String(hashMessage);
Anyone can help me?

Hi,
Please try this code, I tested it on my side, it works fine.
String accountName = "***";
String accountKey = "***+**";
String signature = "";
String requestMethod = "POST";
String urlPath = String.Format("{0}/messages", "inputtext");
String storageServiceVersion = "2012-02-12";
String dateInRfc1123Format = DateTime.UtcNow.ToString("R", CultureInfo.InvariantCulture);
String messageText = String.Format(
"<QueueMessage><MessageText>{0}</MessageText></QueueMessage>", "test2");
UTF8Encoding utf8Encoding = new UTF8Encoding();
Byte[] messageContent = utf8Encoding.GetBytes(messageText);
Int32 messageLength = messageContent.Length;
String canonicalizedHeaders = String.Format(
"x-ms-date:{0}\nx-ms-version:{1}",
dateInRfc1123Format,
storageServiceVersion);
String canonicalizedResource = String.Format("/{0}/{1}", accountName, urlPath);
String stringToSign = String.Format(
"{0}\n\n\n{1}\n\n\n\n\n\n\n\n\n{2}\n{3}",
requestMethod,
messageLength,
canonicalizedHeaders,
canonicalizedResource);
using (HMACSHA256 hmacSha256 = new HMACSHA256(Convert.FromBase64String(accountKey)))
Byte[] dataToHmac = System.Text.Encoding.UTF8.GetBytes(stringToSign);
signature = Convert.ToBase64String(hmacSha256.ComputeHash(dataToHmac));
String authorizationHeader = String.Format(
CultureInfo.InvariantCulture,
"{0} {1}:{2}",
"SharedKey",
accountName,
signature
Uri uri = new Uri(string.Format("https://{0}.queue.core.windows.net/", accountName) + urlPath);
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(uri);
request.Method = requestMethod;
request.Headers.Add("x-ms-date", dateInRfc1123Format);
request.Headers.Add("x-ms-version", storageServiceVersion);
request.Headers.Add("Authorization", authorizationHeader);
request.ContentLength = messageLength;
using (Stream requestStream = request.GetRequestStream())
requestStream.Write(messageContent, 0, messageLength);
using (HttpWebResponse response = (HttpWebResponse)request.GetResponse())
String requestId = response.Headers["x-ms-request-id"];
Also, you could see this page:http://convective.wordpress.com/2010/08/18/examples-of-the-windows-azure-storage-services-rest-api/
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unwanted automatic chrome filter in Photos

My version of Photos, Version 1.0 (209.52.0), on 10.10.3 is automatically and routinely applying the chrome filter to all photos in my archive when I scroll through one-by-one with the right arrow key.
How do I stop this please ?

It seems to happen when the aspect ratio is close to the aspect ratio of the screen only. VERY annoying!

Help Please with Key Signature/Loops

Hello,
I want to just make sure apple loops are playing pack in the project in the original key as they exist in the loop browser. I notice in the arrange window under global tracks, it defaults to key of C. Do I have to change this to everytime I add a loop in a different key to the arrange window? Or will it play in the original key automatically?
Thank you

ooops, typo... I don't think these ARE the new sounds.

How to add a Digital Signature to PDFed document automatically

I am looking for a way to make this placement of the Digital Signature field automatic.
And I want to do it with a thing such as a command line automatically.
Please teach me the method.

Thank you for an answer.
>Do you want to actually sign the PDF or just place a signature field?
I want to actually sign the PDF.
>Do you want to do this on a desktop or a server (you mentioned command line)?
I want to do this on a server(Windows server).

Self- Signed Certificate - Change RSA Public Key & Signature Algorithim

Hi
My 1801 router (IOS 15x) is using the original self signed certificate (1024) with an signature algorithm MD5. I would like to change the cert to a 2048 key length , with a hash of SHA1 or better but I'm unsure how to do this.
Should I just generate new keys or would I be better creating a new self-signed cert? What is the procedure & explicit commands (CLI) to do this?
Many thanks in advance.
Regards
Bob

Sure, the secure-server is the quickest and easiest method but you can create the new key, define the trustpoint manually and enroll the certificate that way.
Below are the commands. (You can of course call the key, trustpoint, O and CN values whatever locally significant names make sense for you.)
router(config)#crypto key generate rsa label router-rsa modulus 2048
The name for the keys will be: router-rsa
% The key modulus size is 2048 bits
% Generating 2048 bit RSA keys, keys will be non-exportable...
[OK] (elapsed time was 10 seconds)
router(config)#
router(config)#crypto pki trustpoint router-ca
router(ca-trustpoint)#enrollment selfsigned
router(ca-trustpoint)#subject-name O=Test,CN=www.router.com
router(ca-trustpoint)#rsakeypair router-rsa
router(config)#crypto pki enroll router-ca
% Include the router serial number in the subject name? [yes/no]: no
% Include an IP address in the subject name? [no]: no
Generate Self Signed Router Certificate? [yes/no]: yes
Router Self Signed Certificate successfully created
router(config)#

Unwanted automatic confirmation of transfer order

Hi,
I am kind of out of good ideas. The problem is following:
I pick for production orders to fixed bins using several different WM movement types. When I am low on stock the production orders then cannibalizes on each other when picking in background. I dont have "propose confirmation" set in any of the WM movement types concerned.
Ex.
2 pcs are in interim storage type 914, then I generate a transfer order for interim storage type 924 (copy of 914), which picks from 914 and confirms automatically.
thanks for any ideas of what else to check.

Hi,
the thing I need to understand is:
1. why does the transfer order pick from another interim storage type in background.
2. why does this type of movement between interims auto-confirm
thanks

Unwanted automatic decrease in bit-rate upon saving. How do I fix this?

Hello all,
After a recent, unexpected computer crash, Audition seems to have lost all of my previously programmed presets and preferences causing one quirk in particular I wish to fix as soon as possible. Please help!!
When working with any MP3 file, as I make changes to the file in Edit view and simply hit ctrl+s, every time I do so a message prompt comes up saying "You may be saving to a compressed (lossy) format. Be sure to keep a backup of your original file if you wish to preserve full audio fidelity." After that, it proceeds to save the changes while at the same time decreases the bit-rate of the file to between 80-96kbps down from 128, 192, etc. It has never done this before, usually it would just make the save without altering the bit-rate also. I'm searching the menus everywhere to find a checkbox that I may have had un-checked before but has gone back to the default since the crash, but can find nothing. I really do not want this automatic downsampling to continue, in order to get around it I have to Save As every time, which makes for a lot more work having to delete the old copies and keep track of which are the edited versions I wish to keep. I work with tons of files, so this gets difficult.
I am using Adobe Audition 3.0 Build 7283.0 on a Vista PC.
I can't thank you enough for any help you might be able to offer. Here's a screenshot of the message itself: http://img809.imageshack.us/img809/8558/ausc.jpg
Melissa R.

Hello SteveG,
Thank you for your prompt reply. Ah yes, I am aware of such a feature in the mp3 options menu, but do you know why my copy of Audition is behaving in this way and how I can get it back to the way it was? Saving As does save the file with the criteria I prefer, but it creates an extra copy that I'd like to avoid since cleaning up the previous versions of each file that are no longer needed can take a lot of work since the folders that contain them I work with are very large, having to be searched by hand to remove the unedited copies.
As where if I hit Save before it would just overwrite the file avoiding creating two of the same file (one with edits the other without), leaving its bit-rate intact instead of reducing it by as much as half at times. Having that aspect of Audition working again would be very helpful!
Thanks again,
Melissa R.

Skype number subscription unwanted automatic renew...

it is inconvenient when a subcription lapses, one might beleive it cancels. not so, it will instead automatically renew without further authorization. i no longer need a skype number but wish to use the land and mobile call out feature so when i added skype credit, it was intended for calling out only and i feel i did not authorize a payment for the skype number, it just deducted my skype credit anyway. now i don't have enough money to pay for my call out script since no refunds are available.
perhaps skype can charge a correction fee and refund at least some of the unexpectedly deducted funds or cancel a script when it lapses? this would seem a friendlier approach.

I too have the same problem
Your Skype Number subscription was cancelled ----- why i didnt cancel it and i want to continue using the same number that i have had for 3 years

Key signatures in scores - unwanted automatic duplication

Similar Messages

Maybe you are looking for