KeyBindings using WHEN_IN_FOCUSED_WINDOW not working for me !!

Hi,
I'm trying to capture "delete" key press event in JBtnPanel class below irrespective of where the current focus is but event is never sent to JBtnPanel class. Any idea where the bug might be ? I print a message to test whether the key is handled by JBtnPanel but NO message is printed. Here as shown towards the end of code snippet, the mainPanel contains childPanel and then the mainPanel is added to contentpane.
     import java.awt.*;
     import java.awt.event.*;
     import javax.swing.*;
     class JBtnPanel extends JPanel {
          JBtnPanel() {
               Action HandleDelete = new AbstractAction() {
                   public void actionPerformed(ActionEvent e) {
                        System.out.println("This is a test !!");
               InputMap input = this.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
               ActionMap action = this.getActionMap();
               input.put(KeyStroke.getKeyStroke(KeyEvent.VK_DELETE, KeyEvent.CTRL_MASK),
                         "HandleDelete");
               action.put("HandleDelete", HandleDelete);
     class TextPanel extends JPanel {
          // override the paintComponent method
       // THE MAIN DEMO OF THIS EXAMPLE:
       public void paintComponent(Graphics g) {
         super.paintComponent(g);
         Font f = new Font("SansSerif", Font.BOLD, 14);
         Font fi = new Font("SansSerif", Font.BOLD + Font.ITALIC, 14);
         FontMetrics fm = g.getFontMetrics(f);
         FontMetrics fim = g.getFontMetrics(fi);
         int cx = 75; int cy = 100;
         g.setFont(f);
         g.drawString("Hello, ", cx, cy);
         cx += fm.stringWidth("Hello, ");
         g.setFont(fi);
         g.drawString("World!", cx, cy);
       } //paintComponent
       //=============================================
       ///////////// main ////////////////////////////
       public static void main(String[] args) {
         test f = new test("My Hello World Frame");
         f.show();
       } //main
     } //class TextPanel
              test Class
     class test extends JFrame {
          public void paintComponent(Graphics g) {
               int i = 0;
               ++i;
          public test(String s) {
          // Frame Parameters
          setTitle(s);
          setSize(300,200); // default size is 0,0
          setLocation(10,200); // default is 0,0 (top left corner)
          // Window Listeners
          addWindowListener(new WindowAdapter() {
            public void windowClosing(WindowEvent e) {
               System.exit(0);
            } //windowClosing
          }); //addWindowLister
          // Add Panels
          JBtnPanel childPanel = new JBtnPanel();
          childPanel.add(new JButton("Fine"));
          TextPanel mainPanel = new TextPanel();
          mainPanel.add(childPanel);
          Container contentPane = getContentPane();
          contentPane.add(mainPanel);
       } //constructor test
     } //class test

It works for me. Are you wanting "delete" or "control+delete"? Cuz you said delete, but your code says control+delete
input.put(KeyStroke.getKeyStroke(KeyEvent.VK_DELETE, 0), "HandleDelete");

Similar Messages

  • Variable .wim file (BackupFile) using %TaskSequence% not working for reference image

    Hello,
    I am trying to make a semi-automated solution for building reference image. The goal is to just select a task sequence and based on only that input create a reference image and store it on the MDT server as a unique named .wim file. I'm doing almost exactly
    the same as all the pro's (Johan, Mikael, etc.). What I do is in the CustomSettings.ini I specify BackupFile to be %TaskSequenceID%.wim. My goal with that is to get a .wim file that is called REFWIN81CORENLX64.wim. Instead of that I get %TaskSequenceID%.wim.
    I'm banging my head against the wall all day now and I have even build another environment to see if the problem occurs there too. It does.. 
    I'm hoping that someone can tell me what Ido wrong.
    Mathijs

    Short Answer:
    You have programmed a race condition into your system.
    Long answer:
    MDT will fill out the TaskSequenceID variable during the MDT LiteTouch Wizard.
    You put the BackupShare variable in your CS.ini file:
    BackupShare=\\MDT02\MDTBuildLab$\%TaskSequenceID%
    However, the CS.ini was ALREADY processed *BEFORE* the MDT LiteTouch Wizard. and since TaskSequenceID was set to <BLANK> then Backupshare becomes the value above. ANy attempt to re-parse the cs.ini file will not process BackupShare because ZTIGather.wsf
    will only pick up the value the first time.
    Instead you should set the BackupShare variable *AFTER* the MDT Litetouch Wizard, if you want to leave it in your CS.ini file, then use Johan's method to re-parse the CS.ini file during the Task Sequence.
    http://www.deployvista.com/tabid/36/EntryID/139/language/en-US/Default.aspx
    -k
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

    I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

    You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
    Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

  • HT4236 I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

    I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

    Hey lalitgupta,
    Thanks for the question. The following article provides troubleshooting steps for Photo Stream:
    iCloud: Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    Thanks,
    Matt M.

  • Where used list is not working for IMG nodes/Document   in solar01

    hi experts
    In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab.  ( like same IMG node  -  define order types used in different business process configuration tab )
    when i use " where used list " from the configuration tab , its not showing the IMG objects  used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
    I need to find out the same IMG objects/ document  used in the same project using the " Where used list " button.
    Please provide your answers
    Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
    Thanks
    Sol man

    Hello there,
    I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
    You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
    e.g:
    Here I created a document in this node:
    Then I added it as a link here:
    and as a copy here:
    When I go back to the original node and use the where-used, it'll only show the original and the link:
    This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
    best regards,
    Fabricius

  • Requested auto spell check not worked for months - gmail uses Firefox's

    Tools Advanced setting is on auto spell check but has not worked for months - yes it had worked, probably for years. Looking at gmail for an auto spell checker I see that it leaves that to one's browser - Firefox.

    Your More system details list doesn't show the en-GB dictionary.
    If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions) and selected.
    You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.<br />
    Also make sure that [X]"Check Spelling" in the right-click context menu has a tick.<br />
    You can also try to toggle the "Check Spelling" item off and on again.
    See:
    * http://kb.mozillazine.org/Spell_checking
    * http://kb.mozillazine.org/Dictionaries
    You can look here for more dictionaries:
    * https://addons.mozilla.org/firefox/language-tools/

  • IPhone 6 External Mic not working for Siri/Dictation

    I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation.  When I plug in the earbuds, they work for everything (including Siri/Dictation).
    Was chatting to Apple support who had me reset all settings.  I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works).  When I turned Siri back on, it does not work.
    I have two questions for the community to see if you can help:
    1- I have been assuming this must be a software problem since the mic does work for non-Siri access.  But is that true?  Is there a hardware component that Siri depends on which could be faulty here?
    2- If it is software, what action should I try to address it?  I have done a reset all settings already and that did not help.
    Doug

    Hi, everyone.  I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again.  I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test.  If you can hear your voice recording clearly, then the mic works.  I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work.  So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls.  Will need to go back to Apple Genius this weekend for sure.  Will give update after the weekend.

  • CALLER ID not working for International incoming calls

    Hi,
    I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
    Any clue?

    yashshankar wrote:
    Hi
    I recently  purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
    Regards
    Yash
    You didn't mention what country your Online Number is in.  Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages.  If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way.  Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
    To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page.  You'll see a screen that would include your current Caller ID settings, and a link to change that.  If your Online Number is from one of those countries I referenced above, just select it and you're done. 
    Hope that helps!
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • Select All in a table does not work for Drag and Drop

    Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
    I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
    I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
    I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
    Does anyone know how to get Select All to work for a Drag Source?
    Thanks.
    -Ed

    Frank-
    OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
    SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
    Thanks again for the reply.
    -Ed

  • Form Designed in LiveCycle will not work for End User

    Please Help!
    I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms.  After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help.  So here's the deal:
    I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms.  The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera.  The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken.  The second subform is basically an image field and text fields used as photo captions/photo compilation pages.  When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)).  Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells.  I was able to find a script to correctly populate those fields for each instance of the table.  Wish I had the form here, but it's at work at the moment.
    My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview.  I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X).  I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly.  However, once they save it, it gets all jumbled and they can't even print it.  We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work.  I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
    Anyone have any thoughts on my long explanation??  Please HELLLLPPPP!

    The error(s) occur when trying to save the document.  I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:"  ---> Then click the "Submit" cmd button.  That should expand the table.  Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table.  Then the user will populate each cell of the table on page 1 with data.  The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1. 
    The problem is in the distributing of the form to the user so they can save the form after populating the data.  I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos).  However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document.  Then re-opened the copy in Acrobat Pro X.  The new copy:
    -had 5 additional rows added to Page 1
    -Duplicates of some of the fields
    -Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
    Again, this all works fine in the LiveCycle Preview but not anywhere else.  I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons.  I also do not want to distribute this form to end users and then collect the data back from them.  I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

  • Wake on Demand: Not working for some services, others OK

    I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
    While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
    I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
    Any thoughts... hints... suggestions?
    One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
    Thanks in advance.

    I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

  • After Upgradation BPF is not working for some users

    Hi All,
    We have recently upgraded from BPC 5.1 to 7MS SP7.  we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
    Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF  does not work for other users except for the first two people who first  used it. Other users have the same rights as the ones who can access the tasks.
    when they  click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does  not getting any thing.
    Any inputs ??

    Hi,
    Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
    If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
    Hope this will drive you to a potential solution.
    Best Regards,
    Patrick

  • Outlook autodiscover is not working for some users in coexistence

    Hi
    We are doing exchnage 2013/2010 coexistence
    Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!.  We end up creating the profiles manually.  It has affected some but not all the users.
    I followed the instructions here but it didn't help.
    http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
    Using outlook 2010, 2013, patches, .... didn't make a difference
    Would you please help?
    Thank you

    Hi 
    If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
    Also you can try below
    You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
    Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
    Name: MaxFieldLength
    Type: DWORD
    Value: 65534
    Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
    Name: MaxRequestBytes
    Type: DWORD
    Value: 16777216
    Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
    Name: MaxTokenSize
    Type: REG_DWORD
    Value: 48000 
    Just reboot the servers once its done and you will be good to go.
     References
    https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
    http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • Software Update Point Switching is not working for some Clients

    Hi there,
    I found nothing similar here and I hope this is the right section.
    I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
    get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
    So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
    From how I understand SUP switching as described here
    http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
    the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
    As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
    So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
    make no attempt to switch.
    I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
    are available in my environment.
    I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
    where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
    Things I tried additionally to all the log file / WMI / registry sniffing:
    Removing the Software Distribution Folder and restarting the Windows Update Agent
    Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
    Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
    I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
    Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
    "reset" on those machines without reinstalling them.

    Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
    The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
    into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
    Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

Maybe you are looking for

  • List of all Sales Orders

    Hello All any ideas, what the transaction code is to view the complete list of all sales orders ever created in R/3 (irrespective of customer)? Thanks in advance Message was edited by:         Shovon Banerjee

  • How to call a Windows DLL out of a ODI procedure?

    Hi we'd like to use an external tool, provided as a MS Windows DLL, in our odi flow. The idea is to use an ODI procedure preparing the input, calling the dll function and handling the functions output. Is this possible? How? Thanks a lot!

  • Spry problems in IE, menus stuttering when opening and closing

    I just intserted some spry collapsible panels into a dreamweaver page I am developing but when I preview the pages in IE8 the spry menus stutter and shake when opening and closing. Does anyone have any idea what is causing this?

  • Delete a character in a file

    i have to delete a single char in a txt file. i'm working with this method: public static void remChar(File inFile, char charToRem) throws IOException{           if (!inFile.exists()) return; BufferedReader in = new BufferedReader(new FileReader(inFi

  • Transition from Dreamweaver CS5 Trial version to paid version

    I've spent weeks working on my site with a trial version of Dreamweaver CS5 (actually it's part of the entire Adobe Web Premium CS5) and have two days left. Then I will have to uninstall the entire package and the trial Dreamweaver with it. I have a