Keyboad stops working after login

Hey guys! I have windows 8.1 installed on my Lenovo Ideapad Z510. Recently, I have been experiencing problems with the keyboard. I can type in my password and log in, but the keyboard stops working after that. It used to stop working and then fix itself after a few minutes, but it completely stopped working yesterday.
I have searched for solutions online and have tried almost everything from disabling filter keys to uninstalling the keyboard driver, but they did not make any difference.
Please let me know if you can think of a solution. Any comments would be greatly appreciated.

Try the on-screen keyboard and see if that works. I don't think this is your problem, but this morning after updating my Yoga from 8 to 8.1 my keyboard stopped working. But it has a touchscreen and then on-screen keyboard worked fine. I fixed the keyboard by moving the screen on the hinges. I have no idea what that did, but it fixed my problem.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Similar Messages

HP 20-b323w keyboard stops working after login.

After initial login, the keyboard stops working. This happens with the wireless and the corded keyboard. After rebooting a few times the same result each time.

Hello Kissdude
I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this we can provide you with accurate information.
Which Windows operating system am I running?
http://windows.microsoft.com/en-CA/windows/which-operating-system
Is the Windows Version on My Computer 32-bit or 64-bit?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02033168
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Windows 7 HDMI stops working after login in normal boot. Safe modes work

Hi guys, I have a problem and I am a complete dummie at this. (Sorry in advance for bad english and hardware/software knowlegde.)
Here's what happened: Yesterday evning I turned off my PC after playing my games. Today when I got home from work my PC looses HDMI connection after "STARTING WINDOWS" screen. That's when my monitor says "No Synch" which means it cant detect a HDMI. I have to hold in off button and restart and then i get to this black classic screen where I can choose Safemode etc. and Normaly. Turns out I can enter safe mode and HDMI works, but i've tried normaly many times and it wont work!
So I've been reading all day and haven't found any working solution(lowering my resolution etc.) So it was suggested that I needed to u-innstall my video drivers and get them again. Or even get older versions first and then installing new ones along with the latest windows update. My problem is that I have no idea what video card I have and in safe mode I can't see it in CONTOL PANEL display settings either.
I'm playing on a little **bleep** tv monitor JWC something btw.
So I'm stuck not knowing what video drivers I need and where to get them, if that's even the problem to beginn with?
I hope someone out there are smarter than me, haha! Thanks Guys!

I'm sorry I thought you were using a notebook and the monitor was your 2nd display device... So it's your primary display, right? And safe mode works...I don't know then. Is there any auto adjustment button on monitor or similar function in monitor's menu?
I work for HP

Right USB Port stops working after disconnecting device since 10.9.2

Hi,
Since updating to 10.9.2 the right USB port on my MBA stops working after diconnecting a device (tested: external hard drive, USB flash drive, USB HSPA Modem). The only way to get the port recognizing the device on that port is to do a restart. If the device is connected from starting the MBA it works fine, if I then eject the drive and reinsert it or a different USB device the device doesn't get recognized. The devices do get power, my WD passport ultra spins up just fine, the USB HSPA modem also indicates it's working (with signal) but nothing shows up in finder or diskutility. If the modem is connected from start (and thus working) and then disconnect from the internet but not remove the drive I can reconnect to the internet. The problem only occurs after disconnecting the device. The port becomes inactive. The left USB port works as expected.
Steps I've taken:
Disk Persmission
PRAM
SMC
Reapplied the 10.9.2 update
Sent feedback to Apple
Some Output:
Boot Mode: Normal
Total CPU usage:
   User 11%                    System 10%
Max %CPU by process (name, UID, %):
   WindowServer         0   4.6
Loaded extrinsic kernel extensions:
   at.obdev.nke.LittleSnitch (4052)
   com.driver.JRDUSBModemData64 (4.0.5)
   com.protech.NoSleep (1.3.3)
Loaded extrinsic daemons:
   net.sourceforge.MonolingualHelper
   com.oracle.java.JavaUpdateHelper
   com.oracle.java.Helper-Tool
   com.microsoft.office.licensing.helper
   com.freemacsoft.appcleanerd
   com.adobe.fpsaud
   at.obdev.littlesnitchd
Loaded extrinsic user agents:
   com.oracle.java.Java-Updater
   at.obdev.LittleSnitchUIAgent
/Library/LaunchAgents:
   at.obdev.LittleSnitchUIAgent.plist
   com.oracle.java.Java-Updater.plist
/Library/LaunchDaemons:
   at.obdev.littlesnitchd.plist
   com.adobe.fpsaud.plist
   com.freemacsoft.appcleanerd.plist
   com.microsoft.office.licensing.helper.plist
   com.oracle.java.Helper-Tool.plist
   com.oracle.java.JavaUpdateHelper.plist
   net.sourceforge.MonolingualHelper.plist
/Library/PrivilegedHelperTools:
   com.freemacsoft.appcleanerd
   com.microsoft.office.licensing.helper
   com.oracle.java.JavaUpdateHelper
   net.sourceforge.MonolingualHelper
Extrinsic loadable bundles:
   /System/Library/Extensions/JRDMassStorageDriver32.kext
             (No bundle ID)
   /System/Library/Extensions/JRDMassStorageDriver64.kext
             (No bundle ID)
   /System/Library/Extensions/JRDUSBModemData32.kext
             (com.driver.JRDUSBModemData32)
   /System/Library/Extensions/JRDUSBModemData64.kext
             (com.driver.JRDUSBModemData64)
   /System/Library/Extensions/LittleSnitch.kext
             (at.obdev.nke.LittleSnitch)
   /System/Library/Extensions/NoSleep.kext
             (com.protech.NoSleep)
   /Library/Audio/Plug-Ins/Components/A52Codec.component
             (com.shepmater.A52Codec)
   /Library/Internet Plug-Ins/Flash Player.plugin
             (com.macromedia.Flash Player.plugin)
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
             (com.oracle.java.JavaAppletPlugin)
   /Library/PreferencePanes/Flash Player.prefPane
             (com.adobe.flashplayerpreferences)
   /Library/PreferencePanes/JavaControlPanel.prefPane
             (com.oracle.java.JavaControlPanel)
   /Library/PreferencePanes/NoSleep.prefPane
             (com.protech.NoSleepPref)
   /Library/QuickTime/AC3MovieImport.component
             (com.cod3r.ac3movieimport)
   /Library/Spotlight/LogicPro.mdimporter
             (No bundle ID)
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
             (com.skype.skypeabdialer)
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
             (com.skype.skypeabsms)
   Library/QuickLook/Pacifist.qlgenerator
             (com.charlessoft.pacifist.qlgenerator)
   Library/Services/Clip to Day One.workflow
             (No bundle ID)
Login hook:
   /Library/Scripts/Hooks/login.sh
Global login items:
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
User login items:
   iTunesHelper
   Sparrow
   Sort Menubar Items
   AppCleaner Helper
   SurplusMeterAgent
Safari extensions:
   Shut Up
   AdBlock
   SafariKeywordSearch
   Disconnect
   MapTricks
Restricted user files: 28
Font problems: 0
Elapsed time (s): 130
etrecheck output:
Hardware Information:
          MacBook Air - model: MacBookAir3,1
          1 1.4 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:20
Disk Information:
          APPLE SSD TS064C disk0 : (60.67 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 59.81 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          EFI (disk2s1) <not mounted>: 209.7 MB
          Radha (disk2s2) /Volumes/Radha: 1.81 TB (1.73 TB free)
          disk2s3 (disk2s3) <not mounted>: 189.89 GB
          Boot OS X (disk2s4) <not mounted>: 134.2 MB
FireWire Information:
Kernel Extensions:
          at.obdev.nke.LittleSnitch          Version: 4052
          com.driver.JRDUSBModemData64          Version: 4.0.5
          com.protech.NoSleep          Version: 1.3.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
                 [loaded]          at.obdev.littlesnitchd.plist
                 [loaded]          com.adobe.fpsaud.plist
                 [loaded]          com.freemacsoft.appcleanerd.plist
                 [loaded]          com.microsoft.office.licensing.helper.plist
                 [loaded]          com.oracle.java.JavaUpdateHelper.plist
                 [loaded]          net.sourceforge.MonolingualHelper.plist
Launch Agents:
                 [loaded]          at.obdev.LittleSnitchUIAgent.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          Sparrow
          Sort Menubar Items
          AppCleaner Helper
          SurplusMeterAgent
3rd Party Preference Panes:
          Flash Player
          Java
          NoSleep
Internet Plug-ins:
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Top Processes by CPU:
              12%          com.apple.WebKit.Networking
               6%          Safari
               4%          WindowServer
               3%          EtreCheck
               2%          hidd
               1%          Terminal
               1%          notifyd
               1%          opendirectoryd
               1%          com.apple.WebKit.WebContent
               0%          Dock
Top Processes by Memory:
          147 MB          Safari
          137 MB          com.apple.WebKit.WebContent
          49 MB          mds_stores
          29 MB          com.apple.WebKit.Networking
          27 MB          TextEdit
          23 MB          WindowServer
          20 MB          Disk
          20 MB          Sparrow
          20 MB          CVMCompiler
          18 MB          Finder
Nothing out of the ordinairy. Thanks for any help

It's an Apple Pro keyboard and mouse, the dongle is
plugged into the Mac and not the keyboard. The same
set-up is, and has been working on all our other
Macs.
The sleep issue sounds interesting- hum, maybe...
Is your keyboard plugged into one of the USB connections on an Apple monitor? If so, you may want to change that connection to one that is on the G5 itself. My monitor came with a warning note indicating that problems will likely occur if the keyboard is connected to the monitor.
I also had a problem with the automatic sleep function. After much trouble-shooting and a logic board replacement, it was concluded that coming out of the automatic sleep function with any USB device active would freeze the entire USB bus. After disabling automatic sleep in system preferences, I've had no freezing problems. My machine works fine with the manual sleep function in the Apple Menu.
AndyH

My Plug in "Free Download Manager" stopped working after update

== Issue
==
I have another kind of problem with Firefox
== Description
==
My Plug in = "Free Download Manager" stopped working after I updated FIrefox !
It worked fine previously ! What did I do wrong ??
**** Also I've forgotten my User name, but Firefox says that my email is registered already
I was on some other Internet provider; and have been a PC user since 1987 ! I am a Retired Network Administrator for both Microsoft NT4 & Novell 4.x Networking; and a former IS Dept. Tech' for an Orlando, FL Corp' that had over 500 PC's;
both Lap & Desk Top for some 3 1/2 yrs.
***** I CONSTANTLY RECOMMEND FIREFOX TO EVERYONE THAT IS EITHER MY CLIENT -- OR ANY OTHER CASUAL CONTACT *****
***** In fact I suggested your Browser to 3 people Today; Wed. the 14th of July 2010 *****
Respectfully;
Raymond E Bachelor
aka "New System Services"
<blockquote>Removed personal info. Please don't out yourself, or post personal info on forums. thanks! -T </blockquote>
== This happened
==
Every time Firefox opened
== I updated Firefox to the Newest Version !
==
== Troubleshooting information
==
PLEASE !!!!
SEND ME MY LOGIN INFO I have an active email entry; but I've lost track of my Username over the years !
== Firefox version
==
3.6.6
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6
== Plugins installed
==
*-Shockwave Flash 10.1 r53
*Adobe Acrobat Plug-In Version 7.00 for Netscape
*Office Plugin for Netscape Navigator
*np-mswmp
*getplusplusadobe16263
*Default Plug-in
*Delivery Network Acceleration by BitTorrent™
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

I hate it when updates break things instead of fixing them. Can't Mozilla leave well enough alone? At the very least, each new release should be tested so it works with ALL PREVIOUS extensions!
Wait till you "update" to firefox 4 and EVERYthing breaks, including the buttons that come with it. There is no arrow next to the dropdown button, right clicking the tab bar doesn't bring up the correct menu, but one as though it were the menu bar (which is missing) and the information bar is missing. True, it's fast, but you'll spend weeks getting it to work properly.

Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

Hmmm, here's the opposite problem/fix...
Gmail send but not receive...
Here are two steps that have come in handy in related situations
1) login to gmail on your computer or device via a web browser
2) once logged in successfully, go to this URL to unlock:
https://www.google.com/accounts/DisplayUnlockCaptch
Is your gMail POP or IMAP?
If IMAP...
Is the Outgoing server smtp.gmail.com, port 25, SSL on, & Authentication = Password

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

SharePoint Online 2013 Workflows for one List stopped working after 07/08/2014

Our client host application in Office 365 SharePoint Online 2013, and we just found that all workflows for one list stopped working after 7, Aug 2014. It kept displaying pop-up message "Something went wrong. To try again, reload the page and then start
the workflow." when manually start a workflow for this List.
Tested workflow for other list, there's no problem.
Could anyone can help on this issue?

Our client host application in Office 365 SharePoint Online 2013, and we just found that all workflows for one list stopped working after 7, Aug 2014. It kept displaying pop-up message "Something went wrong. To try again, reload the page and then start
the workflow." when manually start a workflow for this List.
Tested workflow for other list, there's no problem.
Could anyone can help on this issue?

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

USB hub and internet sharing stop working after sleep

Hi,
I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
I have all the Mac updates installed.

Thanks Barry.
The hub is on its way to the manufacturer for after sales service...
But the issue with AirPort remains the same, even after resetting SMC.
Some clarification:
* It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
* The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

MS Office 2013 Stopped working after 3/12/14 Patch

The entire suite of Office stopped working after the latest patch. I did 1/2 last week and it got interrupted - this is when the problem started; and did the other 1/2 on the 18th without any change. Includes: Access, Excel, Info Path, Lync, OneNote,
Outlook, PowerPoint, Publisher, and Word. SkyDrive still seems to be working. I now have two entries in the Start menu:
Excel 2013 3/18/2014
Excel 1/24/2013
Neither works. When I click the icon from the taskbar, it highlights for several seconds the goes away. No processes are started (monitor with Process Explorer). Stuff I've tried that hasn't worked:
Restoring Office programs to previous version.
Backing out patches (although some refuse to be backed out). I installed some of the optional ones associated with Office, but those did get backed out.
Starting programs in safe mode.
Turn off anti-virus and firewall.
The interwebs are silent on anything similar (except for the suggestions above on previous versions/patches).
What gets me is there is no error or activity whatsoever. What I don't want to do is reinstall, since I do have a fair amount of customization which I hate to redo, and I really like to fix things or understand why they are broken so they don't happen again.
In the case of customization, safe mode would have been great, but now I face reinstall without real root cause.
Any help or suggestions or knowledge on this?

Thanks Wojciech, but don't have KB890830 installed.
Just after posting, I found a very promising article: http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/office-2013-wont-start/0269c763-7a03-4a6f-81cb-6522ef7d3ea3
However, I thought reinstalling the updates was probably best so that I could work through from that standpoint. So after a shutdown and startup today, I find all of Office removed for me. Sweet - problem solved!!??? *sigh* Not only that, but any configuration
files or customizations are completely gone as well, so no chance of saving them off first.

WD Mybook Thunderbolt Duo stop working after 10.9.4 update.

WD Thunderbolt Duo stop working after 10.9.4 update.
The drive does not show in disk Utility & WD utility, but it show at System information. Restart does not help,
MBP 15' early 2011.

Only thunderbolt available, check on some forum, it could be my MBP's thunderbolt port problem.
I'm living in Malaysia, there are no apple store, only authorised seller, it will take weeks to repair... which is a big issue for me,

Coldfusion 64 bit windows installer stops working after recent microsoft update

Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
My question is at the end.
Trying to deploy coldfusion 9 enterprise 64 bit trial version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
Steps taken (remember, this is all 64 bit):
1. Installed the base OS which was slipstreamed with SP2.
2. Checked w/ microsoft and installed 63 OS updates.
3. Launch the CF9 trial exe.
4. As soon as the first screen finishes (the one that looks like it is extracting files) then the second screen pops up (the one that simply says CF Adobe Coldfusion 9) and the progress bar quickly moves 95% to the right and the install application quits. No error, no nothing. No log file either.
5. After a moment of incredulous silence (and retrying/rebooting, etc), I started to google it. I found nothing. However, I did find a post (thanks dspent!) that was helpful in that it told how he was able to get at a log file of sorts, by pre-extracting the coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand. (Dspent's install snafu was different than mine, but his post was very valuable and got me started in the right direction.)
6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
7. From the windows directory created by step 6, I launched adobe_cf.exe.
8. Same thing (the install application quits. No error, no nothing. No log file either.).
9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
13. Bingo! That install works.
14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
15. Back on the first server (the one with the MS security patches installed and the one that CF won't install on). In the CF file adobe_cf.lax (one of the files extracted in step 6) there is a line that mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
17. Modify a line in adobe_cf.lax :
   before
     lax.nl.current.vm=resource\\jre\\bin\\java.exe
   after
     lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
(that assumes that you let step 16 install to the default location)
Save the file.
18. Run the install ... ** IT WORKS ** !
Obviously, the built in java provided with the CF installer is no longer compatible with some change introduced by some recent MS update on the W2K3 64b SP2 platform.
And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the version of java.exe that is in that directory is the original version, not the newer version I forced the installer to use).
On the surface, CF seems to run OK, but I have not done any application testing yet.
And finally my
** QUESTION **
Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same (close though) so I certainly don't want to break things by doing this, but instinct tells me that if the installer broke using the older version, then something else is gonna break down the road if I don't use the new version. On the other hand, the differences in the directories and files is enough that it makes me very nervous, with my limitied java skill set, to make this decision.
Thanks in advance!!
Byron

Hi Byron,
Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
#java.home=C:/ColdFusion9/runtime/jre
Add new line like so and save jvm.config:
java.home=C:/Program Files/Java/jdk1.6.0_24/jre
Note there the slashes and the location of the JRE (runtime) - you need to point to the one in JDK because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.
Start CF via SERVICES.msc.
HTH, Carl.

Keyboad stops working after login

Similar Messages

Maybe you are looking for