Keyboard and AC adapter problem

I have a Toshiba protégé z935-p300 and I just recently experienced this problem where whenever I plug in the ac adapter the letter "K" starts typing rapidly on the monitor. The button is not stuck or dirty. Whenever the adapter is unplugged everything works perfect. Please help me fix or find a resolution for this problem.

I have never heard of this before. I Googled and came up with nothing even close to your problem. It's the week end and you may recieve more replies latter. I would try a different adapter???
Dokie!
PS The only thing that comes to mind is a improper ground????
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Similar Messages

Bluetooth keyboard and mouse connectivity problems

I have an Apple bluetooth keyboard and Mighty Mouse connected to my Macbook Pro 13", running ML 10.8.1.
The keyboard and mouse will constantly disconnect and re-connect on their own every few minutes. I'll see the "connection lost" notification, and then shortly after the "connected" notification. Also, even when the keyboard is connected, it often becomes unresponsive and/or strange things happen, such as the special characters menu appearing above the cursor (which I believe there is a keyboard shortcut to invoke, but I'm not doing that; it appears on its own).
This never happened in Lion.
Any idea what's happening and how to fix it?

Hello:
Try making the devices favorites.
Barry

Keyboard and characters unique problem IN all programs

Hello, thank you reading I have a unique problem with my computer. I have searched a great deal to locate information on my issue with no luck. It is very hard to describe the problem and I figured asking here might be the best idea. I have all the latest update software. I have not installed any new ]programs and this problem just started out of nowhere with In the last week. No wireless keyboard.
First the computer writes capital letters on its own while I type. The letters seem to be only the n, I and s. This goes for every application or text box on the web that I can type In.
Second the left arrow key when pressed types this ]]]]]]]]
Third the right shift key when pressed works, but makes an error beep each time
Fourth the enter key randomly doubles spaces rather than single space when pressed in programs like mail and word.
Fifth the left shiFt key types IIII when pressed
I have done the usual rebooting, repairing of the disk and permissions, emptying cache, restored defaults IN keyboard setting, sticky keys off with no luck. Once again no new programs have been installed. Issue started about the same day I registered for and started using facebook one week ago if that means anything?
Thanks for taking a look at my Issue.
-Brody

Still having the same issue with my computer hs anyone ever heard of this?

System.out.println and Network Adapter problem

Hello,
I am encountering a 2 strange problems. I have 2 oracle application server instances, one dev and one production.
The first problem is when I type System.out.println in the JSP's i am able to see the output in both \opmn\logs\oc4jinstance. But the System.out.println in the java classes or bean show up only in development logs but not in production box.
Is there a setting I am missing here?
The second problem is on our development machine the application works fine, but as soon as we deploy the application on production I encounter:
could not open new connection: Io exception: The Network Adapter could not establish the connection
I have a class called DBUtils, which uses a 3rd party library to get connections from the connection pool as below. Using JSP I call the getConnection(). On my dev Oracle Application Server Instance it works fine, but on production I get the error. Can it be there is a setting that I am missing on the production box?
When I use a JSP and connect to the database without using the DBUtil class. I can connect to the database fine. Also using the DBUtil class with production oracle IP address on the development machine lets me connect with no problem, but production machine does not let me.
public class DBUtils {
static ConnectionPoolBean pool;
static {
System.out.println("DBUtils() - before connection pool bean");
pool = new ConnectionPoolBean();
pool.setDriverClassName("oracle.jdbc.driver.OracleDriver");
pool.setdbURL("jdbc:oracle:thin:@IPADDRESS:PORT:SID");
pool.setUser("USERNAME");
pool.setPassword("PASSWORD");
pool.setInitialConnections(1);
pool.setIncrement(1);
pool.setSoftMaxConnections(40);
public static Connection getConnection() throws SQLException {
System.out.println("Getting Oracle Connection");
return pool.getConnection();
public static void returnConnection(Connection conn) throws SQLException {
System.out.println("Returning Connection");
pool.returnConnection(conn);
Thanks for your help in advance.

Hi
System.out.println is a method of PrintStream in IO which is used to print the output on console in java progs.Here in jsp ,the o/p is printed on server's console window.But out.println is totally different as, out is implicit object derived from JspWriter and is used sly to PrinWriter 's object is used in servlets.It's work is to write upon Browser.
System.out.println() is normally used in jsp for debugging purposes only.
Ashish

Apple keyboard and mouse connection problems with windows 7

Hello everyone,
I just completed the installation of windows 7 home premium on my bootcamp partition, and even though in the beginning my keyboard worked properly after installing some windows updates it stopped working.
So, i tried to reinstall the specific bootcamp drivers(as described in installation guide), I also tried repair drivers but the problem continues!
Has anyone experienced something like this ? Could you advise me something?
Thank you!

Hi lolarennt,
Have just done the same as you on the same system. It took over 12 hours of mucking around. Had lots of problems with the black screen issue, mouse not working, failing to load error message 0x80070071 ( all this from memory... saw it a few times LOL). The bottom line was I started up in Mac version and using disk utility repaired permissions and then started a fresh and sixth install. To cut a long story short, this fixed my installing issues. My mouse didn't work initially, an issue with "DPInst.exe" something to do with the 64 bit install. I then updated the win7 programme using the update windows function and things now work fine. Granted the mouse does take a short while to work after starting Win7(10seconds or so) but no further problems...yet! BTW I had to update something like 79 installs totalling over 250mb and if you go down this path don't interrupt the updating process, because you'll have to restore and redo the updates ( I did thinking the system had shutdown). I only updated win7 not any other MS programme. Enjoy

Blackberry 9300 keyboard and track pad problem?!?!?

Recently my blackberry has been acting weird. I'd be texting or on bbm and then the letters would go capalized and have accents over them. it'd look like french. but after sending the message it'd go back to normal. other times when i'd be texting, i'd be typing my message and then the | thingy indicating where the text is would shot up to the top of the message. When i try and bring it back down, itd go back up. Help me please D: i've tried two battery pulls and still the same thing.

I'm also experiencing the same problem. What is making the cursor move randomly and the keyboard to act up?

Sapdb (maxdb) and jdbc adapter problem

Hi,
i have installed this jdbc file:
http://sapdb.org/7.4/sap_db_jdbc.htm
like in this how-to:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to install and configure external drivers for jdbc and jms adapters.pdf
then i set up an jdbc to file szenario to test the adapter.
Driver is: com.sap.dbtech.jdbc.DriverSapDB
connection is: jdbc:sapdb://sapdb-host/XI_DATA
with sapdb-host is the db server and XI_DATA ist the database
user and pw is dba
sql statement is: SELECT * FROM "AAA_XI_DATA" WHERE "number" = 50
with AAA_XI_DATA is the table with test data.
the statment works in the sapdb studio. (No ; in sapdb and the XI)
but when i have a look at the runtime monitor at the af
messages there is no message genereated. where can i
check, if the jdbc driver is working and where do i find
error messages?
Regards
J.
Message was edited by: Jörg Pieper

You can check if there is some kind of error with the JDBC Adapter in the Runtime Workbench. Inside the RWB, open "Component Monitoring", "tree view", "Adapter Monitoring", and in the adapter listing you'll find the "JDBC Adapter". It should have a green light. If not, the error will be displayed.

Urgent ! BPEL file and ftp adapter problem.

Hi All!
I have created a bpel process having two partner links.One for the ftp adapter and one for the file adapter. I want the ftp adapter to poll the *.pdf files in the specified directory on the remote machine periodically and get them to my local machine here. For this I am using ftp adapter with read operation and with opaque schemas(because I want the files as they are without any transformation). I am using a receive activity with the ftp adapter, with the create instance box checked.
To write the file to the local machine I am using file adapter and write operation.File adapter also uses opaque schema.With this file adapter I am using invoke activity.Invoke is below the receive activity in the bpel process. I deployed this successfully on the default domain. I want the bpel process to run automatically,depending on the polling frequency given and create instances and bring the files to my machine.
But it is not happening.
Can anybody tell me where I am going wrong.How to accomplish this? It is very urgent issue for me.
Thanking in advance,
Regards,
Deepika.

Hi All!
Now I am able to write files and also read files successfully with the remote server. I followed the same method described above.I am using binary format itself for pdf files.But I have to check the option 'to delete files after successful retrieval' to make this happen.I created several partnerlinks with the option in the ftp adapter not checked,but it is not working. Has anybody done successful retrieval without deleting the files at the remote server? If so please let me know.
Thanking in advance,
Regards,
Deepika.
Message was edited by:
Deepika

HP notebook keyboard and mouse not working

Hi
I spilled tea on my notebook. Now the system boots but keyboard & mouse do not work. Therefore I am not able to
login at the windows screen. When I hardboot, on pressing esc it goes to boot menu, but then the keyboard stops working
so I cannot go to safe mode or recovery mode. I also tried pressing F11 to enter BIOS, but it does not work.
I can however access it via LAN and since I had shared the C drive, I was able to recover the data. Do you have any idea
how I can restore the system now ? I do not have the recovery disks.
Are there any particular function keys to press while booting ?
Thanks a lot for your help

Thoughts on a Soggy System:
Have you tried the obvious -- connecting an external keyboard and mouse? If you are not near a store where you can buy these, you can order them online as a set. Almost anything would do and Windows 7 and 8 install basic drivers for most keyboards and mice without problems when the system comes online.
If you have not waited for several days for things to REALLY dry out before attempting to get back onto the system, then you may get away with this yet - if you WAIT for a few days. Chances are not great, but ... ?
If you can get the system to a repair shop, it is not terribly expensive to have the keyboard / touchpad replaced -- assuming that is all that is wrong with the system -- and the repair is not a lengthy process. This might be something you can do yourself if you are skilled, disparate, in a tiny spot on the planet somewhere (without a repair shop), or like these things...
We can check for part numbers and all of that if you are interested. You can search for for yourself, too.
Start at
Support and Drivers
Enter your information -- Look along the colum and Click on Manuals. You are looking for the Maintenance Manual.
If you do not find it, provide your Exact Product number and I will look for you.
Locate the Notebook Product Number
I am pretty sure you are going to have to have some sort of keyboard control over that system to do more than just use the hard drive to do a hard recovery of the data. You are not at that point until you determine that you cannot access the data through the computer itseslf...
You can always send the system to HP and have it repaired. It is not free unless you have the warranty for it - but it is not horrible to do; HP makes the process pretty easy. It might be worth checking if you do not have a local option available!
Contact HP - USA
Good Luck!
Kind Regards,
Dragon-Fur

Keyboard and mouse dosnt work

Hi,
seem to have a problem ,from when i turn on my computer my keyboard and mouse will not work. i tried a nother keyboard and the same problem still arises.the fittings are PS2.please please can someone point me into teh right direction.
Mobo: k8n diamond

Quote from: dacull on 17-June-05, 03:57:33
how many keyboards have you tried delirious?
ive tried the 2 i have. should i try more?

Problem "bug" iOS 8 iPad 2, virtual keyboard and stream hdmi cable (adapter)

Hi all I have a problem with regard to virtual keyboard and streaming through the adapter HdMi, the keyboard when I want to write after a while, the horizontal bar where there google voice covers the top of the letters and unable to write and had to power cycle the device to return to how it was before, while streaming via hdmi between iPad 2 and a monitor when I run the stream, the screen is completely black but emits audio and iPad remains the streaming window with the window crashed the site, what not to do, if I make an end to the stream in full screen, you see a window but not full screen, if someone knows how to help me out on this, you have had the same problem as my'd be happy to hear from you soon and solve this bug in iOS 7.1.2 before that did not happen, thanks and warm greetings to all of you.

Hi all I have a problem with regard to virtual keyboard and streaming through the adapter HdMi, the keyboard when I want to write after a while, the horizontal bar where there google voice covers the top of the letters and unable to write and had to power cycle the device to return to how it was before, while streaming via hdmi between iPad 2 and a monitor when I run the stream, the screen is completely black but emits audio and iPad remains the streaming window with the window crashed the site, what not to do, if I make an end to the stream in full screen, you see a window but not full screen, if someone knows how to help me out on this, you have had the same problem as my'd be happy to hear from you soon and solve this bug in iOS 7.1.2 before that did not happen, thanks and warm greetings to all of you.

Macbook pro Late 2011 13.3 inch i7 keyboard and trackpad not working bluetooth showing a cross sign and no usb mouse is detected. Almost dead keyboard and mouse. Earlier same problem used to be solved by opening the lower cover and closing it.

My macbook pro 13.3 inch i7 late 2011 edition has previously encountered unresponsive trackpad and keyboard. To solve that, I used to open the back cover and then close it. It has been working fine since that. Yesterday, same thing happened, this time I noticed that bluetooth icon is showing a cross sign across it and keyboard and trackpad were unesponsive. After some time , everything worked fine and bluetooth sign was back to normal. Then , suddenly it went back to the problem. I shut it down by holding the power button. When I booted it again, I could not login because keyboard and trackpad were not working. I attached a HP mouse it didnt work. I opened the back cover disconnected the battery and then connected it again, didnt worked. Since then , I have tried many things and nothing has solved the problem.

@sanjampet
As you suggested I reset the smc, in the first boot nothing worked. In the second boot, it all worked like a charm. I thought that my problem is resolved now. To test it, I shut it down properly. Next morning, I powered it on, all things i.e, keyboard, trackpad, bluetooth etc. worked and I thought that problem has been solved. When I was just going to visit apple forum to reply you, the same problem reappeared. A sawtooth cross over bluetooth icon, keyboard not working, trackpad not working,no usb mouse working which worked well when it was fine. I reset smc so many times again and again but same problem continued. Isn't it a problem of the firmware?
Next time when it will work, I will update its firmware.
My macbook was bought in dec2011 so no warranty now.

870A Fuzion Power has problem with keyboard and mouse movement only in games.

Hey guys,
recently built a new system and chose to go with the 870A Fuzion Power mainboard, everything has gone very smoothly execpt for one problem, only when I play games like Crysis 2 ect the mouse seems to jolt around now and again and the keyboard decides to stop responding if I hold down the movement keys, and this is only in game not surfing the web for example. Now, I am using a wireless mouse and keyboard but I plugged in a PS/2 keyboard and the exact same thing happened. I've installed all of the drivers that came with this board and the drivers for the mouse and keyboard. Any of you guys ever had this sort of problem or know how to fix this?
Thanks.

I bought a new Macbook pro in june 2010, I didn't have any keyboard or mouse issues prior to upgrading to 10.6.4 supposedly this update was made to fix some issues with keyboard and mouse becoming unresponsive. For me the opposite happened. after the upgrade, my keyboard and mouse (trackpad) becomes sometimes partially unresponsive or totally unresponsive. the only way to solve the problem is by completely turning of the computer and turning back on.. granted it doesn't happen very often.. generally once every about 2-3 weeks but it is still annoying though..
I didn't have a chance to use the computer too much on the previous version (10.6.3) so I don't know if it is software related or hardware related.. any thoughts?
Message was edited by: msoued

Problem with keyboard and audio on Satellite L40

Hi everybody,
I just installed XP SP2 on my Satellite L40 (BTW thanx to all you that have helped me overcome the problems during this operation with your threads), but I have some problem with my keyboard. I have an azerty keyboard and after I installed xp, it worked as a qwerty, I repared it, now all my letters are working fine, but i have some problems with some symbols, such as @, !, _,if you understand me.
Could somebody help me???
I also have problems with my audio, in fact I have no audio at all, in control panel it says that no audio device is found.
I saw some threads that said that I should first install kb888111, and another likely thing, but i can't find the other one. I've downloaded the sound driver from the toshiba website; thanx for helping me in that field also.
bye

I have the same problem with sound...I have found hotfix kb888111 and I instaled that one...but when i wanted to start instaling sound driver a popup window say thet there is some error and can't continue with instaling sound driver...
I found hotfix kb888111 in this folder which i have downladed from toshiba site: english\sound driver\mshdqfe\win2k_xp\us\kb888111xps2....
i do not know what to do.....Does anybody else knows....

Problem with keyboard and mouse pm8m-v

I have gotten this pm8m-v from a freind who knew nothing about computers. He had problems with the keyboard and mouse not responding at start up or just freeze on him. So I check it out, called MSI and even sent it to them, they claimed that there was nothing wrong with the board. So here are the specs of the computer now:
pm8m-v motherboard
2-256MB memory PC-2700 DDR 333Mhz
intel P4 2.6GHz
codegen power supply 300W
gateway CDW
western digital 40 harddrive
the rest is on board stuff
the problem is still there and it is driving me crazy, can you please help?

I had the same problem with the PM8M-V, today as a matter of fact, and I kept getting locked up at the point where I had to hit enter to load the WinXP CD to setup the system. After finding this topic I tried a different keyboard. The one that was being used was a Kennsiington PS2 cheapo, I swapped it for a Microsoft (one of those ergonomic styles and I've had it for a long time) Keyboard PS2, and the problem went away. I'm typing on the Kennsington right now, so it's fine just wasn't liked by the PM8M-V for some reason.

Keyboard and AC adapter problem

Similar Messages

Maybe you are looking for