Keyboard and mouse wont work unless booted in safe mode.

So my keyboard and mouse wont work at all when i start up normally, so i coudnt even log on, then i tried safe mode and i was able to use the mouse and keyboard and log in, then when i loged in i got some messages:
*+System extention cannot be used+*
+The system extention "/system/library/extentions/IOUSBFamily.Kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the products vendor for an update.+
And 2 others: MicrosoftMouse.kext and msdosfs.kext
Im pretty sure how i got this problem, i was using bootcamp and i got this program called MacDrive (bad Idea)and it corrupted my HD or something so i had to use disk warrior to fix it. I also used disk utility in safe mode but there were no errors it said.
and this is probably a hardware problem but i cant use DVD's anymore, my drive will only read CD's now, must be broken....
so ya, i dunno what to do exept get my drive fixed and to a backup and reinstall OS...

Hi
There are no many options which could solve this problem.
It can be a hardware problem or software related issue.
Can you use the internal keyboard within the BIOS?
Check this.
If this would not be possible, I assume the hardware is faulty.
Additionally I recommend testing the keyboard and touchpad using the factory settings.
Recover the notebook and check if the keyboard would functions. Otherwise you will need an helps from an notebook technician in order to replace the keyboard and touchpad

Similar Messages

  • Keyboard and mouse not working on boot??

    Hi,
    on boot up, my mouse and keyboard tend to stop working, and when searching around, it all seems to point to editing the xorg.conf. my questions are how to edit the xorg.conf through a live cd? I've gotten as far as mounting the file system, but get an error when using these:
    mount -t proc proc proc/
    mount -t sysfs sys sys/
    mount -o bind /dev dev/
    Could someone possibly walk me through this process?
    thanks in advance!!

    http://wiki.archlinux.org/index.php/Xor … n_problems
    If Xorg will not start, or the screen is completely black, the keyboard and mouse is not working, etc., first take these simple steps:
        * Check the log file: cat /var/log/Xorg.0.log
        * Make sure that HAL has been started prior to running Xorg:
    # /etc/rc.d/hal start
        * Install input driver (keyboard, mouse, joystick, tablet, etc...):
    # pacman -S xf86-input-evdev
    Did you install the appropriate input driver?
    You might still need xf86-input-keyboard and xf86-input-mouse, in addition to xf86-input-evdev.

  • Keyboard and mouse not working after boot

    Hello!
    it's my first time here
    I have been using archlinux for a couple of months and after an upgrade, my mouse and keyboard stopped working.
    I have also posted it on linuxquestions:
    http://www.linuxquestions.org/questions … ot-934040/
    What might be causing that problem?
    and, considering the problem occurred after an upgrade, reinstalling the system would correct it?

    when booting into runlevel 3, the keyboard and mouse works fine.
    my pacman.log(only for the update day) and messages.log are:
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 11:35:37 myhost dhcpcd[2756]: eth0: eth0: MTU set to 576
    Mar 11 11:39:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:39:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:39:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 11:42:11 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:42:11 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:42:11 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 11:44:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:44:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:44:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:06:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:06:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:06:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:16:45 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:16:45 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:16:45 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:19:15 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:19:15 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:19:15 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:21:45 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:21:45 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:21:45 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:23:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:23:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:23:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:31:56 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:31:56 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:31:56 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:34:26 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:34:26 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:34:26 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 12:35:37 myhost dhcpcd[2926]: eth0: eth0: MTU set to 576
    Mar 11 12:36:56 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:36:56 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:36:56 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:40:27 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:40:27 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:40:27 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:52:30 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:52:30 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:52:30 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:55:00 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:55:00 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:55:00 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:57:30 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:57:30 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:57:30 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 13:21:01 myhost -- MARK --
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 13:35:37 myhost dhcpcd[3041]: eth0: eth0: MTU set to 576
    Mar 11 13:55:37 myhost -- MARK --
    Mar 11 14:21:01 myhost -- MARK --
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 14:35:37 myhost dhcpcd[3095]: eth0: eth0: MTU set to 576
    Mar 11 14:55:37 myhost -- MARK --
    Mar 11 15:21:01 myhost -- MARK --
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 15:35:38 myhost dhcpcd[3144]: eth0: eth0: MTU set to 576
    Mar 11 15:55:38 myhost -- MARK --
    Mar 11 16:21:01 myhost -- MARK --
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 16:35:38 myhost dhcpcd[3192]: eth0: eth0: MTU set to 576
    Mar 11 16:51:02 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 16:51:02 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 16:51:02 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 17:21:01 myhost -- MARK --
    Mar 11 17:27:48 myhost init: Trying to re-exec init
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:25 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:47 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:47 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:05 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:31:15 myhost kernel: [25090.053873] mdadm: sending ioctl 800c0910 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053877] mdadm: sending ioctl 800c0910 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053883] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053885] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.060059] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.060061] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.076899] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.076902] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.077037] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.077039] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 17:35:38 myhost dhcpcd[6669]: eth0: eth0: MTU set to 576
    Mar 11 17:55:07 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 17:55:07 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 17:55:07 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 17:57:37 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 17:57:37 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 17:57:37 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:00:07 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 18:00:07 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 18:00:07 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:17:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 18:17:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 18:17:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 18:35:38 myhost dhcpcd[7243]: eth0: eth0: MTU set to 576
    Mar 11 18:55:39 myhost -- MARK --
    Mar 11 19:21:01 myhost -- MARK --
    Mar 11 19:27:03 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:27:04 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:27:04 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:29:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:29:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:29:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:32:03 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:32:03 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:32:03 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:34:05 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:34:05 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:34:05 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 19:35:38 myhost dhcpcd[8708]: eth0: eth0: MTU set to 576
    Mar 11 19:55:38 myhost -- MARK --
    Mar 11 20:21:01 myhost -- MARK --
    Mar 11 20:32:12 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:32:12 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:32:12 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:34:42 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:34:42 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:34:42 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 20:35:38 myhost dhcpcd[10147]: eth0: eth0: MTU set to 576
    Mar 11 20:37:12 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:37:12 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:37:12 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:48:37 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:48:37 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:48:37 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:54:44 myhost shutdown[10347]: shutting down for system halt
    Mar 11 20:54:44 myhost init: Switching to runlevel: 0
    Mar 11 20:54:48 myhost dhcpcd[10522]: sending signal 1 to pid 1269
    Mar 11 20:54:48 myhost dhcpcd[1269]: received SIGHUP, releasing
    Mar 11 20:54:48 myhost dhcpcd[1269]: eth0: releasing lease of 192.168.1.100
    Mar 11 20:54:48 myhost dhcpcd[10522]: waiting for pid 1269 to exit
    Mar 11 20:54:48 myhost dhcpcd[10527]: eth0: eth0: MTU restored to 1500
    Mar 11 20:54:49 myhost dhcpcd[1269]: eth0: removing interface
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NX (Execute Disable) protection: active
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMI present.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 12 10:25:59 myhost kernel: [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Using GB pages for direct mapping
    Mar 12 10:25:59 myhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] RAMDISK: 3759a000 - 37ff0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: FACS 00000000bffce000 00040
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No NUMA configuration found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Zone PFN ranges:
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Movable zone start PFN for each node
    Mar 12 10:25:59 myhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000bffc0
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    Mar 12 10:25:59 myhost kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Mar 12 10:25:59 myhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Allocating PCI resources starting at bfffe000 (gap: bfffe000:3ec02000)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
    Mar 12 10:25:59 myhost kernel: [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82176 r8192 d24320 u524288
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027914
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Policy zone: Normal
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Checking aperture...
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Node 0: aperture @ 748000000 size 32 MB
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Aperture beyond 4GB. Ignoring.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Please enable the IOMMU option in the BIOS setup
    Mar 12 10:25:59 myhost kernel: [ 0.000000] This costs you 64 MB of RAM
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Memory: 3974248k/5242880k available (4488k kernel code, 1049284k absent, 219348k reserved, 4409k data, 736k init)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Verbose stalled-CPUs detection is disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Console: colour VGA+ 80x25
    Mar 12 10:25:59 myhost kernel: [ 0.000000] console [tty0] enabled
    Mar 12 10:25:59 myhost kernel: [ 0.000000] allocated 33554432 bytes of page_cgroup
    Mar 12 10:25:59 myhost kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Fast TSC calibration using PIT
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Detected 2109.668 MHz processor.
    Mar 12 10:25:59 myhost kernel: [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4221.14 BogoMIPS (lpj=7032226)
    Mar 12 10:25:59 myhost kernel: [ 0.003342] pid_max: default: 32768 minimum: 301
    Mar 12 10:25:59 myhost kernel: [ 0.003370] Security Framework initialized
    Mar 12 10:25:59 myhost kernel: [ 0.003376] AppArmor: AppArmor disabled by boot time parameter
    Mar 12 10:25:59 myhost kernel: [ 0.003905] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.007031] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.007954] Mount-cache hash table entries: 256
    Mar 12 10:25:59 myhost kernel: [ 0.008114] Initializing cgroup subsys cpuacct
    Mar 12 10:25:59 myhost kernel: [ 0.008121] Initializing cgroup subsys memory
    Mar 12 10:25:59 myhost kernel: [ 0.008131] Initializing cgroup subsys devices
    Mar 12 10:25:59 myhost kernel: [ 0.008133] Initializing cgroup subsys freezer
    Mar 12 10:25:59 myhost kernel: [ 0.008136] Initializing cgroup subsys net_cls
    Mar 12 10:25:59 myhost kernel: [ 0.008138] Initializing cgroup subsys blkio
    Mar 12 10:25:59 myhost kernel: [ 0.008192] CPU: Physical Processor ID: 0
    Mar 12 10:25:59 myhost kernel: [ 0.008194] CPU: Processor Core ID: 0
    Mar 12 10:25:59 myhost kernel: [ 0.008197] mce: CPU supports 6 MCE banks
    Mar 12 10:25:59 myhost kernel: [ 0.008208] using AMD E400 aware idle routine
    Mar 12 10:25:59 myhost kernel: [ 0.009025] ACPI: Core revision 20110623
    Mar 12 10:25:59 myhost kernel: [ 0.011442] ftrace: allocating 17394 entries in 69 pages
    Mar 12 10:25:59 myhost kernel: [ 0.014007] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    Mar 12 10:25:59 myhost kernel: [ 0.047059] CPU0: AMD Phenom(tm) 8400 Triple-Core Processor stepping 02
    Mar 12 10:25:59 myhost kernel: [ 0.049997] Performance Events: AMD PMU driver.
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... version: 0
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... bit width: 48
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... generic registers: 4
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... value mask: 0000ffffffffffff
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... max period: 00007fffffffffff
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... fixed-purpose events: 0
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... event mask: 000000000000000f
    Mar 12 10:25:59 myhost kernel: [ 0.066733] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.093342] Booting Node 0, Processors #1
    Mar 12 10:25:59 myhost kernel: [ 0.190007] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.210005] #2
    Mar 12 10:25:59 myhost kernel: [ 0.306665] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.313317] Brought up 3 CPUs
    Mar 12 10:25:59 myhost kernel: [ 0.313319] Total of 3 processors activated (12662.21 BogoMIPS).
    Mar 12 10:25:59 myhost kernel: [ 0.315139] devtmpfs: initialized
    Mar 12 10:25:59 myhost kernel: [ 0.317377] PM: Registering ACPI NVS region at bffce000 (139264 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.317603] print_constraints: dummy:
    Mar 12 10:25:59 myhost kernel: [ 0.317656] NET: Registered protocol family 16
    Mar 12 10:25:59 myhost kernel: [ 0.317767] TOM: 00000000c0000000 aka 3072M
    Mar 12 10:25:59 myhost kernel: [ 0.317784] TOM2: 0000000140000000 aka 5120M
    Mar 12 10:25:59 myhost kernel: [ 0.317805] Extended Config Space enabled on 1 nodes
    Mar 12 10:25:59 myhost kernel: [ 0.317819] ACPI: bus type pci registered
    Mar 12 10:25:59 myhost kernel: [ 0.317893] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 12 10:25:59 myhost kernel: [ 0.317896] PCI: not using MMCONFIG
    Mar 12 10:25:59 myhost kernel: [ 0.317898] PCI: Using configuration type 1 for base access
    Mar 12 10:25:59 myhost kernel: [ 0.317899] PCI: Using configuration type 1 for extended access
    Mar 12 10:25:59 myhost kernel: [ 0.318408] bio: create slab <bio-0> at 0
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Module Device)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Processor Device)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(3.0 _SCP Extensions)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Processor Aggregator Device)
    Mar 12 10:25:59 myhost kernel: [ 0.321075] ACPI: Executed 1 blocks of module-level executable AML code
    Mar 12 10:25:59 myhost kernel: [ 0.322673] ACPI: Interpreter enabled
    Mar 12 10:25:59 myhost kernel: [ 0.322677] ACPI: (supports S0 S1 S4 S5)
    Mar 12 10:25:59 myhost kernel: [ 0.322695] ACPI: Using IOAPIC for interrupt routing
    Mar 12 10:25:59 myhost kernel: [ 0.322713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 12 10:25:59 myhost kernel: [ 0.323739] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Mar 12 10:25:59 myhost kernel: [ 0.353905] ACPI: No dock devices found.
    Mar 12 10:25:59 myhost kernel: [ 0.353908] HEST: Table not found.
    Mar 12 10:25:59 myhost kernel: [ 0.353912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Mar 12 10:25:59 myhost kernel: [ 0.354095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Mar 12 10:25:59 myhost kernel: [ 0.354265] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    Mar 12 10:25:59 myhost kernel: [ 0.354268] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354271] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354273] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354276] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354279] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    Mar 12 10:25:59 myhost kernel: [ 0.355812] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
    Mar 12 10:25:59 myhost kernel: [ 0.359989] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    Mar 12 10:25:59 myhost kernel: [ 0.360030] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    Mar 12 10:25:59 myhost kernel: [ 0.360061] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
    Mar 12 10:25:59 myhost kernel: [ 0.360429] pci0000:00: Requesting ACPI _OSC control (0x1d)
    Mar 12 10:25:59 myhost kernel: [ 0.360569] pci0000:00: ACPI _OSC control (0x1d) granted
    Mar 12 10:25:59 myhost kernel: [ 0.365142] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365238] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
    Mar 12 10:25:59 myhost kernel: [ 0.365330] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365424] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365515] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365606] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365697] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365788] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
    Mar 12 10:25:59 myhost kernel: [ 0.365882] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
    Mar 12 10:25:59 myhost kernel: [ 0.365973] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366073] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
    Mar 12 10:25:59 myhost kernel: [ 0.366165] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
    Mar 12 10:25:59 myhost kernel: [ 0.366256] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.366346] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
    Mar 12 10:25:59 myhost kernel: [ 0.366437] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
    Mar 12 10:25:59 myhost kernel: [ 0.366528] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366618] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366728] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: loaded
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: bridge control possible 0000:02:00.0
    Mar 12 10:25:59 myhost kernel: [ 0.366818] PCI: Using ACPI for IRQ routing
    Mar 12 10:25:59 myhost kernel: [ 0.374202] pci 0000:00:01.3: no compatible bridge window for [mem 0xfec80000-0xfecfffff]
    Mar 12 10:25:59 myhost kernel: [ 0.374361] NetLabel: Initializing
    Mar 12 10:25:59 myhost kernel: [ 0.374363] NetLabel: domain hash size = 128
    Mar 12 10:25:59 myhost kernel: [ 0.374365] NetLabel: protocols = UNLABELED CIPSOv4
    Mar 12 10:25:59 myhost kernel: [ 0.374382] NetLabel: unlabeled traffic allowed by default
    Mar 12 10:25:59 myhost kernel: [ 0.381236] pnp: PnP ACPI init
    Mar 12 10:25:59 myhost kernel: [ 0.381259] ACPI: bus type pnp registered
    Mar 12 10:25:59 myhost kernel: [ 0.382933] system 00:07: [io 0x04d0-0x04d1] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382939] system 00:07: [io 0x0800-0x080f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382942] system 00:07: [io 0x4000-0x407f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382945] system 00:07: [io 0x4080-0x40ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382948] system 00:07: [io 0x4400-0x447f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382950] system 00:07: [io 0x4480-0x44ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382953] system 00:07: [io 0x4800-0x487f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382955] system 00:07: [io 0x4880-0x48ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382958] system 00:07: [io 0x4c00-0x4c7f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382960] system 00:07: [io 0x4c80-0x4cff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382964] system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382966] system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382969] system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382973] system 00:07: [mem 0xfec80000-0x1fd93ffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382975] system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382978] system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382981] system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382984] system 00:07: [mem 0xffb80000-0xffffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383127] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383130] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383413] system 00:0b: [io 0x0a00-0x0adf] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383416] system 00:0b: [io 0x0ae0-0x0aef] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383507] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383708] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383710] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383713] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383716] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383719] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383953] pnp: PnP ACPI: found 14 devices
    Mar 12 10:25:59 myhost kernel: [ 0.383955] ACPI: ACPI bus type pnp unregistered
    Mar 12 10:25:59 myhost kernel: [ 0.390613] Switching to clocksource acpi_pm
    Mar 12 10:25:59 myhost kernel: [ 0.390674] pci 0000:00:01.3: BAR 0: assigned [mem 0xd0000000-0xd007ffff]
    Mar 12 10:25:59 myhost kernel: [ 0.390679] pci 0000:00:01.3: BAR 0: set to [mem 0xd0000000-0xd007ffff] (PCI address [0xd0000000-0xd007ffff])
    Mar 12 10:25:59 myhost kernel: [ 0.390683] pci 0000:00:04.0: PCI bridge to [bus 01-01]
    Mar 12 10:25:59 myhost kernel: [ 0.390691] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    Mar 12 10:25:59 myhost kernel: [ 0.390694] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
    Mar 12 10:25:59 myhost kernel: [ 0.390698] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.390702] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Mar 12 10:25:59 myhost kernel: [ 0.390706] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    Mar 12 10:25:59 myhost kernel: [ 0.390712] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
    Mar 12 10:25:59 myhost kernel: [ 0.390824] NET: Registered protocol family 2
    Mar 12 10:25:59 myhost kernel: [ 0.391013] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.392601] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.395867] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396352] TCP: Hash tables configured (established 524288 bind 65536)
    Mar 12 10:25:59 myhost kernel: [ 0.396355] TCP reno registered
    Mar 12 10:25:59 myhost kernel: [ 0.396368] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396419] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396554] NET: Registered protocol family 1
    Mar 12 10:25:59 myhost kernel: [ 0.460124] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460179] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460246] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460312] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460377] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460449] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460526] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460609] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460711] Unpacking initramfs...
    Mar 12 10:25:59 myhost kernel: [ 0.572196] Freeing initrd memory: 10584k freed
    Mar 12 10:25:59 myhost kernel: [ 0.577900] PCI-DMA: Disabling AGP.
    Mar 12 10:25:59 myhost kernel: [ 0.581545] PCI-DMA: aperture base @ b4000000 size 65536 KB
    Mar 12 10:25:59 myhost kernel: [ 0.581547] PCI-DMA: using GART IOMMU.
    Mar 12 10:25:59 myhost kernel: [ 0.581551] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    Mar 12 10:25:59 myhost kernel: [ 0.585462] IBS: LVT offset 1 assigned
    Mar 12 10:25:59 myhost kernel: [ 0.585486] perf: AMD IBS detected (0x00000007)
    Mar 12 10:25:59 myhost kernel: [ 0.585671] audit: initializing netlink socket (disabled)
    Mar 12 10:25:59 myhost kernel: [ 0.585695] type=2000 audit(1331547952.583:1): initialized
    Mar 12 10:25:59 myhost kernel: [ 0.598511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Mar 12 10:25:59 myhost kernel: [ 0.625385] VFS: Disk quotas dquot_6.5.2
    Mar 12 10:25:59 myhost kernel: [ 0.625456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.625563] msgmni has been set to 7911
    Mar 12 10:25:59 myhost kernel: [ 0.625796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    Mar 12 10:25:59 myhost kernel: [ 0.625843] io scheduler noop registered
    Mar 12 10:25:59 myhost kernel: [ 0.625845] io scheduler deadline registered
    Mar 12 10:25:59 myhost kernel: [ 0.625880] io scheduler cfq registered (default)
    Mar 12 10:25:59 myhost kernel: [ 0.626497] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626501] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626523] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626541] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626710] ERST: Table is not found!
    Mar 12 10:25:59 myhost kernel: [ 0.626712] GHES: HEST is not enabled!
    Mar 12 10:25:59 myhost kernel: [ 0.626780] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Mar 12 10:25:59 myhost kernel: [ 0.647333] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Mar 12 10:25:59 myhost kernel: [ 0.883974] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Mar 12 10:25:59 myhost kernel: [ 0.943516] Linux agpgart interface v0.103
    Mar 12 10:25:59 myhost kernel: [ 0.943585] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    Mar 12 10:25:59 myhost kernel: [ 0.945853] serio: i8042 KBD port at 0x60,0x64 irq 1
    Mar 12 10:25:59 myhost kernel: [ 0.945870] serio: i8042 AUX port at 0x60,0x64 irq 12
    Mar 12 10:25:59 myhost kernel: [ 0.946084] mousedev: PS/2 mouse device common for all mice
    Mar 12 10:25:59 myhost kernel: [ 0.946138] rtc_cmos 00:02: RTC can wake from S4
    Mar 12 10:25:59 myhost kernel: [ 0.946297] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    Mar 12 10:25:59 myhost kernel: [ 0.946334] rtc0: alarms up to one year, y3k, 114 bytes nvram
    Mar 12 10:25:59 myhost kernel: [ 0.946347] cpuidle: using governor ladder
    Mar 12 10:25:59 myhost kernel: [ 0.946350] cpuidle: using governor menu
    Mar 12 10:25:59 myhost kernel: [ 0.946589] TCP cubic registered
    Mar 12 10:25:59 myhost kernel: [ 0.946729] NET: Registered protocol family 10
    Mar 12 10:25:59 myhost kernel: [ 0.947209] NET: Registered protocol family 17
    Mar 12 10:25:59 myhost kernel: [ 0.947213] Registering the dns_resolver key type
    Mar 12 10:25:59 myhost kernel: [ 0.947383] registered taskstats version 1
    Mar 12 10:25:59 myhost kernel: [ 0.960176] rtc_cmos 00:02: setting system clock to 2012-03-12 10:25:53 UTC (1331547953)
    Mar 12 10:25:59 myhost kernel: [ 0.960226] Initializing network drop monitor service
    Mar 12 10:25:59 myhost kernel: [ 0.961665] Freeing unused kernel memory: 736k freed
    Mar 12 10:25:59 myhost kernel: [ 0.961941] Write protecting the kernel read-only data: 8192k
    Mar 12 10:25:59 myhost kernel: [ 0.964578] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Mar 12 10:25:59 myhost kernel: [ 0.968163] Freeing unused kernel memory: 1636k freed
    Mar 12 10:25:59 myhost kernel: [ 0.971309] Freeing unused kernel memory: 660k freed
    Mar 12 10:25:59 myhost [ 0.983845] udevd[66]: starting version 181
    Mar 12 10:25:59 myhost kernel: [ 1.019251] usbcore: registered new interface driver usbfs
    Mar 12 10:25:59 myhost kernel: [ 1.019287] usbcore: registered new interface driver hub
    Mar 12 10:25:59 myhost kernel: [ 1.019363] usbcore: registered new device driver usb
    Mar 12 10:25:59 myhost kernel: [ 1.020457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Mar 12 10:25:59 myhost kernel: [ 1.022334] SCSI subsystem initialized
    Mar 12 10:25:59 myhost kernel: [ 1.024094] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
    Mar 12 10:25:59 myhost kernel: [ 1.024122] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
    Mar 12 10:25:59 myhost kernel: [ 1.024181] ehci_hcd 0000:00:02.1: EHCI Host Controller
    Mar 12 10:25:59 myhost kernel: [ 1.024230] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    Mar 12 10:25:59 myhost kernel: [ 1.024274] ehci_hcd 0000:00:02.1: debug port 1
    Mar 12 10:25:59 myhost kernel: [ 1.024314] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdbf7ec00
    Mar 12 10:25:59 myhost kernel: [ 1.033384] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    Mar 12 10:25:59 myhost kernel: [ 1.033711] hub 1-0:1.0: USB hub found
    Mar 12 10:25:59 myhost kernel: [ 1.033717] hub 1-0:1.0: 10 ports detected
    Mar 12 10:25:59 myhost kernel: [ 1.034730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Mar 12 10:25:59 myhost kernel: [ 1.036435] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
    Mar 12 10:25:59 myhost kernel: [ 1.036458] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
    Mar 12 10:25:59 myhost kernel: [ 1.036513] ohci_hcd 0000:00:02.0: OHCI Host Controller
    Mar 12 10:25:59 myhost kernel: [ 1.036536] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    Mar 12 10:25:59 myhost kernel: [ 1.036579] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdbf7f000
    Mar 12 10:25:59 myhost kernel: [ 1.088876] hub 2-0:1.0: USB hub found
    Mar 12 10:25:59 myhost kernel: [ 1.088885] hub 2-0:1.0: 10 ports detected
    Mar 12 10:25:59 myhost kernel: [ 1.090175] scsi0 : pata_amd
    Mar 12 10:25:59 myhost kernel: [ 1.090309] scsi1 : pata_amd
    Mar 12 10:25:59 myhost kernel: [ 1.091064] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
    Mar 12 10:25:59 myhost kernel: [ 1.091067] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
    Mar 12 10:25:59 myhost kernel: [ 1.094698] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
    Mar 12 10:25:59 myhost kernel: [ 1.094721] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
    Mar 12 10:25:59 myhost kernel: [ 1.095105] scsi2 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095190] scsi3 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095306] ata3: SATA max UDMA/133 cmd 0xdd80 ctl 0xdd00 bmdma 0xdb00 irq 21
    Mar 12 10:25:59 myhost kernel: [ 1.095309] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xdb80 bmdma 0xdb08 irq 21
    Mar 12 10:25:59 myhost kernel: [ 1.095559] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
    Mar 12 10:25:59 myhost kernel: [ 1.095574] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
    Mar 12 10:25:59 myhost kernel: [ 1.095843] scsi4 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095923] scsi5 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.096025] ata5: SATA max UDMA/133 cmd 0xda80 ctl 0xda00 bmdma 0xd880 irq 20
    Mar 12 10:25:59 myhost kernel: [ 1.096028] ata6: SATA max UDMA/133 cmd 0xd980 ctl 0xd900 bmdma 0xd888 irq 20
    Mar 12 10:25:59 myhost kernel: [ 1.417172] ata5: SATA link down (SStatus 0 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 1.560059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 1.566979] ata3.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
    Mar 12 10:25:59 myhost kernel: [ 1.566983] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Mar 12 10:25:59 myhost kernel: [ 1.573620] ata3.00: configured for UDMA/133
    Mar 12 10:25:59 myhost kernel: [ 1.573817] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
    Mar 12 10:25:59 myhost kernel: [ 1.586714] Refined TSC clocksource calibration: 2109.721 MHz.
    Mar 12 10:25:59 myhost kernel: [ 1.586720] Switching to clocksource tsc
    Mar 12 10:25:59 myhost kernel: [ 2.040045] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 2.046813] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
    Mar 12 10:25:59 myhost kernel: [ 2.060169] ata4.00: configured for UDMA/100
    Mar 12 10:25:59 myhost kernel: [ 2.068605] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
    Mar 12 10:25:59 myhost kernel: [ 2.390479] ata6: SATA link down (SStatus 0 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 2.397239] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    Mar 12 10:25:59 myhost kernel: [ 2.397316] sd 2:0:0:0: [sda] Write Protect is off
    Mar 12 10:25:59 myhost kernel: [ 2.397338] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Mar 12 10:25:59 myhost kernel: [ 2.413212] sda: sda1 sda2 sda3 sda4
    Mar 12 10:25:59 myhost kernel: [ 2.413653] sd 2:0:0:0: [sda] Attached SCSI disk
    Mar 12 10:25:59 myhost kernel: [ 2.423220] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Mar 12 10:25:59 myhost kernel: [ 2.423226] cdrom: Uniform CD-ROM driver Revision: 3.20
    Mar 12 10:25:59 myhost kernel: [ 2.818552] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
    Mar 12 10:25:59 myhost kernel: [ 2.818556] EXT4-fs (sda3): write access will be enabled during recovery
    Mar 12 10:25:59 myhost kernel: [ 2.844947] EXT4-fs (sda3): recovery complete
    Mar 12 10:25:59 myhost kernel: [ 2.845244] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    Mar 12 10:25:59 myhost [ 4.125862] udevd[177]: starting version 181
    Mar 12 10:25:59 myhost kernel: [ 5.513480] EXT4-fs (sda3): re-mounted. Opts: (null)
    Mar 12 10:25:59 myhost kernel: [ 5.619429] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    Mar 12 10:26:01 myhost ntpd[546]: ntpd [email protected] Thu Mar 1 21:32:56 UTC 2012 (1)
    Mar 12 10:26:01 myhost ntpd[547]: proto: precision = 0.115 usec
    Mar 12 10:26:01 myhost ntpd[547]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen and drop on 1 v6wildcard :: UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen normally on 2 lo 127.0.0.1 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen normally on 3 lo ::1 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: peers refreshed
    Mar 12 10:26:01 myhost ntpd[547]: Listening on routing socket on fd #20 for interface updates
    Mar 12 10:26:02 myhost kernel: [ 9.760264] mtrr: base(0xdd000000) is not aligned on a size(0xe00000) boundary
    Mar 12 10:26:57 myhost dbus[419]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] NX (Execute Disable) protection: active
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMI present.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 12:41:56 myhost kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 12 12:41:56 myhost kernel: [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Using GB pages for direct mapping
    Mar 12 12:41:56 myhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] RAMDISK: 37d6c000 - 37ff0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: FACS 00000000bffce000 00040
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
    Mar 12 12:41:56 myhost kernel: [ 0.000000] No NUMA configuration found
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Zone PFN ranges:
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Movable zone start PFN for each node
    Mar 12 12:41:56 myhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000bffc0
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    Mar 12 12:41:56 myhost kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Mar 12 12:41:56 myhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
    Mar 12 12

  • My Keyboard and Mouse Quit Working and Computer Slow to Boot Up

    Last week my iMac wireless keyboard and mouse quit working. (Batteries are OK). That same morning the computer started taking a very long time - several minutes - to boot up. I've been using a wired keyboard and mouse but I'd rather get back to the wireless ones.  The other discussions I've read all refer to Bluetooth but I don't find  that on my computer. Help!!   Thanks.

    Hello cindycat,
    Love the name ... so evocative 
    Go to Apple menu > Systems preferences > Internet & Wireless.   There you will find bluetooth.   Click on it and In the bottom right corner is a purple ?.   Click on that to learn about setting up bluetooth.
    Incidentally, batteries are often not okay (though you may think otherwise).   The only batteries that are okay are top quality unused batteries.   And even then you should check the contact points inside the mouse in case there is corrosion.
    Keep us advised.
    71.

  • Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive tha downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it?

    Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive that I downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it? Would I have to get a hub so I could use the stuff I already have? Is that viewsonic too old to work on it?
    What else would I need? Please advise...

    Yes for keyboard and mouse.
    The monitor will work if it has an HDMI, VGA ir DVI input. If it only has a VGA input you will need this adopter
    http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser#selected-step1=MINI-DISPLAY-PORT&selected-step2=VGA&step=3

  • Keyboard and mouse not working correctly after installing Windows 8.1

    I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the sytem did a reboot. Numbers on keypad stopped typing and letters were being capitalized when the caps lock was off and the numbers across the top will only type the symbol above the numbers. 
    I looked up this problem and it seems I need to enter UEFI settings and disable Intel XHCI mode. When I get into the UEFI settings I cannot make any selection from the startup menu. Both my keyboard and mouse stop working. 
    Any suggestions?
    This question was solved.
    View Solution.

    Thank you for posting a response. Fortunately, I didn't have to try your solution because the computer resolved itself. 

  • Hi i installed wrong iousbfamily on osx and now my login screen is frozen, keyboard and mouse not working plz help

    hi i installed wrong iousbfamily on osx and now my login screen is frozen, keyboard and mouse not working plz help

    How and why did you install that?  What steps did you take in that process.  I can then help with some steps to undo them. 

  • Keyboard and mouse not working

    both keyboard and mouse not working. I have changed batteries and checked drivers  please help..  thank you
    This question was solved.
    View Solution.

    Thanks for the information, that is exactly what I needed.
    If you are having the enter issue when using the wired KB from your old computer that sounds software related with the blog site.
    What web browser do you use when on that website?
    Connect your wireless equipment back and if you continue to have the issue with the letters repeating then you should inquire about a replacement for what is referred to as "sticky keys".  With it being a new unit this shouldn't be an issue.
    Let me know if you have other questions.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Does anyone know how to fix my 2010 macbook air the keyboard and mouse not working

    keyboard and mouse not working on macbook air ?

    Hi aaphillylawyer,
    Welcome to Apple Support Communities.
    The article linked below provides some general troubleshooting tips that may resolve the issue with the keyboard on the MacBook Air.
    Mac OS X 10.6: If keys on your keyboard don’t work
    http://support.apple.com/kb/PH6748
    I hope this helps.
    -Jason

  • Keyboard and mouse isnt working in xorg [solved]

    ive tried everything and read every wiki. but i still think its something simple i just cannot understand.
    when i type startx i get a window with more windows.
    but the keyboard and mouse isnt working so i have to turn off the computer to reboot and go back.
    what should i do?
    i just installed
    xf86 input mouse
    and keyboard
    Last edited by brainpower (2009-05-02 22:41:23)

    schuay wrote:
    what wilco said.
    start hal using "sudo /etc/rc.d/hal start" before starting xorg. if mouse/keyboard work, add hal to the DAEMONS array in /etc/rc.conf.
    imo disabling hotplugging is cheap, just ignoring a problem instead of solving it
    If he don't need hotplugging, then there is no reason to use it...

  • Starting problems, computer freezes, keyboard and mouse stop working

    Hi can anyone help? My powerbook has just stopped working, rarely starts, when it does keyboard and mouse stop working after a while or even before i am able to login. At one point I was getting a grey screen with the words, memory access invalid???? Please help...
    powerbook G4    

    power surge could have damaged something inside, or it maybe unrelated to the problem.
    PowerBook can get hot if there is some short circuit inside and power flow is disrupted, also it's possible that the fans are not working properly.
    as a guess, it is likely either hard drive or logic board problem.

  • Ultraslim wireless keyboard and mouse not working

    Hi ,  I purchased the Lenovo Ultraslim Wireless Keyboard & Mouse (pn: 57Y4700) about 4 months ago for use with my T60 laptop (which i use with a docking station and large lenovo monitor at work).
    Everything was woking fine until last Monday when I can into work after the weekend and neither the mouse or keyboard worked. I replaced the batteries in both, rebooted the machine several time, switch the USB ports for the nano receiver, but nothing seems to have worked.
    I looked online for troubleshooting options, but did not find anything.
    The mouse and keyboard don't seem to have a "sych" button - if I recall correctly everything worked right out of the box.
    My theory is that the nano reciever was damaged (not sure how) -- but don't know how to proceed:
    can the nano reciever be replaced;
    any other options to troubleshoot;
    any chance that this could be a software problem
    Thanks

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My imac  keyboard and mouse not working

    On my imac,keyboard and mouse not working,i can't login or do anything,i have tried unplug mains,plug back,hold power botton alt  cmd p and r all at same time for 40sec still nothing,i need help bec i can't use my imac please help

    How about telling us how your keyboard & mouse are not working?  Are both using batteries or are they wired?  If batteries, have you checked and/or changed them?  Keyboard & mouse Apple's or 3rd party?  If you are still under warranty and/or have AC, call them & let Apple deal w/your problems.
    If possible, try another keyboard & mouse? 
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    ================
    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
    CLICKY CLICK-----> Help us to help you on these forums
    ***This will help in providing you with the proper and/or correct solutions.***

  • HP notebook keyboard and mouse not working

    Hi
    I spilled tea on my notebook. Now the system boots but keyboard & mouse do not work. Therefore I am not able to
    login at the windows screen. When I hardboot, on pressing esc it goes to boot menu, but then the keyboard stops working
    so I cannot go to safe mode or recovery mode. I also tried pressing F11 to enter BIOS, but it does not work.
    I can however access it via LAN and since I had shared the C drive, I was able to recover the data. Do you have any idea
    how I can restore the system now ? I do not have the recovery disks.
    Are there any particular function keys to press while booting ?
    Thanks a lot for your help

    Thoughts on a Soggy System:
    Have you tried the obvious -- connecting an external keyboard and mouse?  If you are not near a store where you can buy these, you can order them online as a set.  Almost anything would do and Windows 7 and 8 install basic drivers for most keyboards and mice without problems when the system comes online.
    If you have not waited for several days for things to REALLY dry out before attempting to get back onto the system, then you may get away with this yet - if you WAIT for a few days.  Chances are not great, but ... ?
    If you can get the system to a repair shop, it is not terribly expensive to have the keyboard / touchpad replaced -- assuming that is all that is wrong with the system -- and the repair is not a lengthy process.  This might be something you can do yourself if you are skilled, disparate, in a tiny spot on the planet somewhere (without a repair shop), or like these things...
    We can check for part numbers and all of that if you are interested.  You can search for for yourself, too.
    Start at
    Support and Drivers
    Enter your information -- Look along the colum and Click on Manuals.  You are looking for the Maintenance Manual.
    If you do not find it, provide your Exact Product number and I will look for you.
    Locate the Notebook Product Number
    I am pretty sure you are going to have to have some sort of keyboard control over that system to do more than just use the hard drive to do a hard recovery of the data.  You are not at that point until you determine that you cannot access the data through the computer itseslf...
    You can always send the system to HP and have it repaired.  It is not free unless you have the warranty for it - but it is not horrible to do;  HP makes the process pretty easy.  It might be worth checking if you do not have a local option available!
    Contact HP - USA
    Good Luck!
    Kind Regards,
    Dragon-Fur

  • Imac 20" keyboard and mouse not working

    Friend has a 20″ imac 2007 usb ports don’t seem to be working can’t use keyboard or mouse, anyone any idea how to get into the system to use a hardware test disc or install disc
    Power seems to be going to the mouse as the red light emits from the bottom.

    has anyone resolved this problem? I haven't been able to get my usb ports to work on my 2007 24" imac. it suddenly stopped responding to keyboard and mouse. during bootup, i can use the keyboard to select boot volume and/or target mode. keyboard and other usb peripherals work fine on other computers. so this indicates that the keyboard is ok, the usb port themselves are ok, but something happens during bootup that causes the computer to stop listening to the usb ports.
    i've tried the smc and pram reset procedures with no luck.

Maybe you are looking for

  • At the time of GR in S.T.O(stock Transfer) - Accouting Doc is not creating

    Hi Friends, We have one company code and 1 plant and now we created new plant no 2 in same company code. When we are going to transfer Plant to plant thro Stock transfer Order (S.T.O) thro Transaction code ME21N. We Issue material from plant 1 to pla

  • What wireless solutions does the video pod support?

    For a future webcast, I have a need to shoot a demonstration of chest x-ray equipment, suturing methods, and other "allied health" related procedures.  A simple webcam is not enough.  I have been looking at wireless camera technologies, and there are

  • I'm trying to update to OS 5.1 and keep getting error 1...

    I've been trying to update to OS 5.1 and keep getting "error 1...". Please...anybody?

  • Macbook pro 15 retina graphic card problems

    I have a problem that my mac dont wanna run the Geforce gt 650M graphic card.. its saying that is running the geforce but you can tell by the proformance that its using the intel HD graphic 4000.. is it software or hardware problems  ? i try running

  • Configuring 526 wireless controller

    Greetings, I recently purchased a Cisco 526 Express Mobility Controller and 5 521 AP. I would like to set this all up using radius and would like to know a good way to implement with security in mind. I am having issues with getting the controller to